Used Taylor-Dunn Tugger for sale (62)

Condition: used, Year of construction: 2011, total length: 3,340 mm, Tugger Taylor-Dunn TC80 Drive Diesel Njdpfxsz Sfb Uj Ag Iown Year built 2011

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Max. weight of the test piece: 40 kg The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! Nodpfxszcqy Es Ag Ijwn The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Shipping will be at the buyer's expense and will be carried out on two Euro pallets. The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: refurbished (used), functionality: fully functional, Taylor Hobson Tallyrond 300 In good condition, Completely overhauled by sm-instruments (with new control unit and software) Includes side table and accessories Delivery time: several weeks Njdoxpqwispfx Ag Iswn

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest Nwsdpfx Ageru Evgs Ijn - CE safety perimeter guards Year - 2006 CE

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Maximum moment load of the work table: 1250 g/mm Nwedpei Dagksfx Ag Ijn Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Total height: 1675 mm

Condition: used, This listing is for a 1 of 2 Taylor-Wharton LS6000 Nitrogen Vessel. Nwsdpsxx Aw Tsfx Ag Ien The unit is in full working condition and is ready for immediate release. The Worthington Industries Laboratory System (LS) Series of cryogenic refrigerators is uniquely designed for vial storage in convenient box-type storage racks. The liquid nitrogen refrigerators offer maximum holding times, which means lower per vial operating costs and fewer refills. They deliver extremely stable low-temperature profiles due to the aluminum inner vessel, and offer storage capacities of between 750 and 6000 standard 2ml vials. The LS6000 is available with a simple and reliable liquid level controller with temperature readout that provides automatic filling and alarm features.

Condition: used, TAYLOR HYDRAULIC ROTARY CLAMP - USED Njdpfx Ajwrm S Dog Iown - Working length mm. 2400 - Working width mm. 800 - 20 sections - N. 3 pressers for each section

Condition: like new (used), functionality: fully functional, Year of construction: 2020, Type / Model: EZS 130 (Electric Tow Tractor) Includes several trailers, type: GTE 106 Serial number: 91652991 Year of manufacture: 2020 Nwodjzxrf Tjpfx Ag Ijn Rated pulling force (60 min): 600 N Rated pulling force (5 min): 3,000 N Drive power: 2.8 kW Battery voltage: 24 V Unladen weight (without battery): 320 kg Battery weight (min. / max.): 162 kg / 204 kg

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Nwodelnanwjpfx Ag Isn

Condition: used, Year of construction: 2012, total length: 3,900 mm, Tugger Deutruck DD 120 Drive Diesel Nwodpfezzfy Nsx Ag Ien Year built 2012

Condition: good (used), Year of construction: 2013, 2x 3-unit Hordenwagen train, modular route train trailer Still / LR GmbH – used: Price per train, ex works: €950.00 (net)! Manufacturer: Still / LR GmbH Type: Liftrunner Year of manufacture: 2013 Equipment type: E-frame Max. payload: 1,000 kg Nodpfxszv Iqmo Ag Iewn Equipment number: 5T-0533 D 00046 Condition: good Available: immediately Location: Frankenberg / Saxony warehouse

Condition: used, Year of construction: 2000, total length: 3,300 mm, Tugger Nodpfx Agsyfifle Iown Clark GT 50E Drive Gas Year built 2000

Condition: used, Year of construction: 2009, total length: 2,550 mm, Tugger Nwodpfxoy E Ubgo Ag Ijn Mafi MTE 2/15 Drive Electric Year built 2009

Condition: used, Year of construction: 2014, total length: 1,920 mm, Tugger Nwodpfeztgivsx Ag Ien Still LTX80 Drive Electric Year built 2014

Condition: used, Year of construction: 2009, total length: 2,850 mm, Tugger Mafi MTE 2/15 Drive Electric Year built 2009 Nsdpfx Asyfiffeg Iewn

Condition: used, Year of construction: 2014, total length: 4,100 mm, Tugger Volk DFZ 120H Drive Diesel Nwjdpfoxd Ey Ujx Ag Ion Year built 2014

Condition: used, Year of construction: 2013, total length: 3,350 mm, 50.000 kg Zugkraft/ Anhängelast Nwodpjy E Uckofx Ag Ijn

Condition: used, Year of construction: 2014, total length: 3,540 mm, Tugger Volk TFZ30H Drive Gas Year built 2014 Nwsdpfx Asyt Sldsg Ien

Condition: used, Year of construction: 2020, total length: 4,470 mm, Tugger Wacker Neuson DV100 Drive Diesel Nwodpexpx H Ejfx Ag Ion Year built 2020

Condition: used, Year of construction: 2020, total length: 2,100 mm, Tugger Nwsdsxpx Txjpfx Ag Ijn Club Car Tempo Drive Electric Year built 2020

Condition: used, Year of construction: 2026, total length: 3,110 mm, Tugger Linhai Gator UTV 1100 Drive Diesel Year built 2026 Njdpfezlk Rzjx Ag Iswn

Condition: used, Year of construction: 2016, total length: 3,350 mm, Tugger Simai TE 500RR Nsdpfx Aey E Ucqjg Iswn Drive Electric Year built 2016

Condition: used, Year of construction: 2018, total length: 1,850 mm, - Bedienung Sitz - Tragfähigkeit / Last 8,0t - Nennzugkraft N 1500 - Achslast mit Last vorne/hinten kg: 560/870 (672 / 1013) - Achslast ohne Last vorne/hinten kg 560/ 720 (672 /863) - Bereifung Vollgummi, SE, Luft, Polyurethan Luft - Räder, Anzahl vorne/hinten (x = angetrieben) 1 / 2x - Spurweite, hinten (mm) 860 - Sitzhöhe bezogen auf SIP/ Standhöhe (mm) 1020 - Kupplungshöhe (mm) 285, 340, 395 - Ladehöhe ohne Last (mm) 645 - Ladeflächenlänge (mm) 520 (265) - Überhanglänge (mm) 350 - Ladeflächenbreite (mm) 900 -Wenderadius (mm) 1650 - Kleinster Drehpunktabstand (mm) 600 - Fahrgeschwindigkeit mit /ohne Last km/h 12/20 Nwedpjxpx Ucsfx Ag Ion - Zugkraft mit /ohne Last N 1600 - Maximale Zugkraft mit /ohne Last N 6500 - Betriebsbremse Elektrisch/hydraulisch - Fahrmotor, Leistung S2 60 min kW 4,5 (AC) - Batteriespannung/Nennkapazität (5 h) (V) / (Ah) o. kWh 48/375 - Energieverbrauch nach VDI-Zyklus kWh/h 4,27 (cycl. 2012) - Ausführung des Fahrantriebs elektronisch / stufenlos - Schalldruckpegel LpAZ (Fahrerplatz) dB (A) 60 - Konstante Geschwindigkeit bei Steigungen - Stromkreisunterbrecher für Notfälle - Redundant ausgelegte Notfallsicherheitsschaltungen - Elektrische Hupe - Robustes Stahl-Chassis - Einfacher Wartungszugriff auf alle wichtigen Komponenten - Anschluss für Diagnosecomputer (CAN-Bus-System) - Interaktives Digital-Display - Gekapselte und verpolungssichere Anschlüsse für eine hervorragende und vibrationsbeständige Verbindung - Großzügige Ablagefächer - Anschluss für Hilfsstromversorgung (12 V) im Armaturenbrett - Schlüsselschalter - Verstellbarer Sitz mit PVC-Bezug - Dreirad-Konfiguration für optimale Manövrierfähigkeit - Seitlicher Batteriewechsel, 48-V-Ausführung - Mehrstufige Anhängerkupplung am Heck - 3-stufige Anhängerkupplung (Heck) - Zweistufige Fahrgeschwindigkeitswahl - Robuste Federung und Schwingarmaufhängung an allen drei Rädern - Gekapselter Drehstrom-Fahrmotor mit 4,5 kW

Condition: used, Year of construction: 2021, total length: 3,020 mm, · Transport- und Nutzfahrzeug souverän für allen Bodenbedingungen. · Halbkabine mit dem komfortablen Dreipunktsicherheitsgurten · Extrem stabiler, hochdruckgeformter Stahlrahmen · bis zu 454 kg Zuladungskapazität, · Anhängelast: 680 kg, · Vierradantrieb undEinzelradaufhängung, · Volle Ladepritschengröße · Umklappbare Rücksitzbank, Staufach, · „Active Hill Descent“ zur sicheren, intuitiveren Bedienung, · Eine Doppel-A-Vorder- und Hinterradaufhängung · Frontantrieb oder die Differenzialsperre einzuschltbar duch elektronische Schalter am Armaturenbrett, · Digitale Armaturenbrett mit Gang- und eine Drehzahlanzeige, Geschwindigkeit und Kraftstoffstand, · Die hydraulischen Bremsen · Weiche Gangschaltung, die Parkstellung ist jetzt Teil des Getriebes · Antrieb durch wassergekühlten Diesel-Viertaktmotor Yanmar 3TNV70 3 Zylinder Motor gemäß Abgasstufe V. · Rasenschonende niederdruckreifen Njdpfoxd Hx Eox Ag Ijwn · Elektrohydraulische Kippvorrichtung für die Ladepritsche. · Geschwindigkeit: 51 km/h

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, control type: CNC control, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser hours: 30 h, laser power: 6,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,015 mm, travel distance Y-axis: 1,515 mm, travel distance Z-axis: 50 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, 🇳🇱 Verkooptekst voor uw BEKE 6 kW Fiber Lasersnijmachine (3000 × 1500, Reci‑kop) Bent u op zoek naar een krachtige, nauwkeurige en betaalbare lasersnijmachine voor metaalbewerking? Deze BEKE 6 kW fiber lasersnijmachine, uitgerust met een Reci‑laserkop en een efficiënt werkbereik van 3000 × 1500 mm, biedt uitstekende prestaties voor zowel dunne als dikke metalen platen. Echt 6000 watt vermogen voor het snijden van staal, RVS, aluminium, koper en messing Reci‑laserkop voor stabiele prestaties, hoge snijkwaliteit en lage onderhoudskosten Compact werkbereik van 3000 × 1500 mm, ideaal voor standaard platen en efficiënte productie Strakke snijranden zonder nabewerking Hoge productiesnelheid, perfect voor seriewerk en industriële toepassingen Nsdpfx Agozyv Syo Iown Betrouwbare onderdelen: Reci‑kop, Fuji servo’s, HIWIN geleiders Gebruiksvriendelijke CNC‑besturing met hoge nauwkeurigheid Lage energieconsumptie vergeleken met CO₂‑lasers ⚙️ Technische specificaties Werkbereik: 3000 × 1500 mm Vermogen: 6000 W fiber laser Positioneringsnauwkeurigheid: ±0,03 mm Herhaalnauwkeurigheid: ±0,02 mm Snijsnelheid: tot 40 m/min Snijdikte: tot 20 mm, afhankelijk van materiaal Koelsysteem: industrieel waterkoelsysteem