Used Swiss Combi, Dintikon Ch Technischer Entwurf Nr. 056_370 for sale (16,278)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: Fgsdpfozw Apgex Albsg We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 10910806050010, tank capacity: 350 l, usable tank capacity: 300 l, total length: 1,560 mm, total width: 1,560 mm, total height: 1,100 mm, inner diameter: 300 mm, outer diameter: 450 mm, overall weight: 410 kg, wall material: stainless steel, wall thickness: 12 mm, wall structure: double-walled, manhole location: top, reception height: 600 mm, discharge height: 600 mm, operating temperature: 120 °C, operating pressure: 1 bar, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, The Metos Viking Combi 300E is a high-performance, Finnish-made heavy-duty industrial mixing and cooking kettle. The primary physical, structural, and technical documentation outlines the exact specifications for this 300-liter model: 📐 Dimensions & Clearance: Width: 1,560 mm Depth: 1,100 mm (varies up to 1,165 mm depending on the specific safety lid protrusion). Height: 900 mm to the kettle lip / 1,535 mm total height including the elevated control pillar. Tilting Discharge Height: 600 mm clearance from the floor when tilted. ⚖️ Weight: Net Weight (Empty): 410 kg (Standard 4G model) / Up to 414 kg depending on the configuration of structural sub-surface installation frames. Shipping Weight: Approx. 545 kg packed. ⚡ Electrical & Heating Power Voltage Requirement: 400/230 V, 3NPE, 50/60 Hz Total Power Consumption: 43.6 kW Fgjdpfxjzzxyio Albeg Amperage/Fuse Size: 80 A Heating System: Steam-jacketed indirect electrical system (maximum working pressure of 1.0 bar, yielding up to +120°C inside the jacket). 🚰 Utility Connections: Cold Water (CW): R½" (Ø15 mm) connection. Hot Water (HW): R½" (Ø15 mm) connection. Connection Heights: Water inlets enter at roughly 270 mm from the floor; the main power cable input gland enters at 510 mm. ⚙️ Operational Features: Integrated Mixer: Stepless variable mixing speeds from 20 to 110 RPM with an auto-reverse program and structural scrapers. Tilting: Smooth, heavy-duty electrical motor-driven tilting mechanism.

Condition: used, Year of construction: 2017, feed pressure / bar Fgedpfxoxy S H Ts Albeg liter capacity / l Air consumption / m³/h

Condition: good (used), Manufacturer: Ringoplast ✓ Model: Backgut Combi / tilting trays, 2,500 pieces Fgjdpeyy Ix Iefx Albjg

Condition: excellent (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, ENGEL V 330H/80V/130 Combi Cleanroom – 2-component injection molding machine, manufactured in 2006. The machine comes from pharmaceutical production and is designed for cleanroom applications. Technical data: • 33,107 operating hours • Screw diameter 25/22 mm • Machine weight 10,600 kg Available additional equipment: • GEKU SR 500 ST robot • Safety cage Fgodpfx Ast A Ui Ajlbog • Rotary table • Conveyor belt Location: Schwaigern, Germany. Further technical documentation and an inspection can be arranged.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, total length: 3,051 mm, total height: 1,548 mm, total width: 1,635 mm, type of input current: three-phase, product height (max.): 120 mm, product height (min.): 20 mm, product length (min.): 100 mm, product length (max.): 550 mm, product width (max.): 380 mm, product width (min.): 30 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 22 A, width of welding knife: 450 mm, length of welding knife: 580 mm, overall weight: 1,000 kg, power: 12.9 kW (17.54 HP), input frequency: 50 Hz, air demand: 13.8 m³/h, We are offering this very well-maintained Robopac COMBITECH 5845 AVH shrink wrapping machine and shrink tunnel, manufactured in 2017. Model: COMBITECH 5845 AVH Serial number: 30153878 Year of manufacture: 2017 Mileage: 8060 Sealing bar dimensions WxH: 580 mm x 450 mm Supply voltage: 400 V Product dimensions min. WxDxH: 100 mm x 30 mm x 20 mm Product dimensions max. WxDxH: 550 mm x 380 mm x 120 mm Conveyor belt speed: 5 - 40 m/min Film thickness: Polyolefin 9 - 35 µm, Polyethylene 25 - 50 µm Frequency: 50/60 Hz Number of phases: 3 Current consumption: 22.0 A Fgedpfxsztwg Ee Albjg Total power: 12.9 kW Air consumption: 230.0 Nl/min Maximum pressure: 6.0 bar Weight: 1,000.0 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07-02461, measuring range X-axis: 250 mm, measuring range Z-axis: 310 mm, total width: 390 mm, total length: 430 mm, total height: 805 mm, input voltage: 230 V, overall weight: 80 kg, input frequency: 50 Hz, For sale is a tool presetting machine from the Swiss quality brand PWB Swiss. The machine is in used condition, but the optics and measuring electronics are functional. Extensive VDI accessory package included: The machine is sold with a used set of reduction adapters (ideal for CNC turning operations): Fgjdozy Uqhspfx Albog 1x VDI 30 holder 2x VDI 20 holder (in two different heights) 1x VDI 16 holder Technical data: Measuring range X-axis (longitudinal travel): 250 mm Measuring range Z-axis (vertical travel): 310 mm Base spindle mount: SK 40 Weight: approx. 80 kg Important notes regarding the sale: A test report or printed manual is no longer available. The machine is sold in its current condition, as viewed (uncleaned). An on-site inspection while the machine is powered on is highly recommended. Sales conditions: Price: €1,850 (negotiable, plus VAT) Invoice: A proper invoice with VAT will be issued. Shipping: Self-collection only. Assistance can be provided with loading.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm Fgsdpfx Alezuyplebjg - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, axle configuration: 1 axle, first registration: 06/1995, wheelbase: 5,120 mm, color: other, Year of construction: 1995, Number of axles: 1, Payload: 780 kg, Tare weight: 2720 kg, Gross vehicle weight: 3500 kg, Chassis type: Complete chassis, Combination 330108 = Further information = General information Cab: Day cab Registration number: OD-86-ZR Fedjzxxlaspfx Albogg Technical information Fuel type: Diesel Transmission: Manual gearbox Weights Unladen weight: 2,720 kg Payload: 780 kg GVW: 3,500 kg Environment Emission class: Euro 0 Condition Overall condition: very poor Technical condition: very poor Optical condition: very poor Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), 210131 VARIO 2.2 surface filter, with switching and control unit installed at the factory. Price: on request + VAT (condition as shown in the photo). Motor power: 7.5 kW, 400 V, 50 Hz. Airflow: approx. 4,000 m³/h. Disposal: 2 x 30 L disposable containers. Subject to prior sale! Fgedorzrimspfx Albsg

Condition: good (used), 210138 Surface Filter UNI STAR X, with factory-installed control and switching unit. Price: on request + VAT (condition as shown in the photo). Motor power: 3.3 kW, 400 V, 50 Hz. Air flow rate: approx. 1,500 - 2,500 m³/h Disposal: 2 x 30 L disposable containers. Subject to prior sale! Fjdpfx Aloy It Eiebegg

Condition: good (used), 210137 Surface filter VARIO 2.3, with factory-installed switching and control unit. Price: on request + VAT (condition as shown in the photo). Motor power: 11 kW, 400 V, 50 Hz. Airflow: approx. 5,000 m³/h at 4,800 Pa. Disposal: single hopper support; 200 L lidded drum with pneumatic docking device. Subject to prior sale! Fjdpjy It Drefx Albogg

Condition: used, Karton Former for Karton Sheets Fgedpfjzx Dflsx Albog 6x0.7l inside

Condition: used, Year of construction: 2021, Engie chiller Capacity: 1.9 MW Year of manufacture: 2021 Fedpfx Asyan Arelbjgg Refrigerant: R-1234ze

Condition: good (used), axle configuration: 1 axle, first registration: 01/2015, loading space length: 6,000 mm, loading space width: 2,230 mm, loading space height: 2,220 mm, total length: 6,450 mm, total width: 2,450 mm, total height: 3,150 mm, suspension: air, tire size: 205/65R17,5, wheelbase: 2,900 mm, color: other, Year of construction: 2015, Equipment: tail-lift, = Additional Options and Accessories = - Tail lift = Notes = Number of axles: 1, Payload: 2870 kg, Unladen weight: 2130 kg, Gross vehicle weight: 5000 kg, Chassis type: Complete chassis, Tail lift, Tail lift design: Rear door, Tail lift manufacturer: Anteo, Tail lift material: Steel and aluminum, Tail lift size: 230x160 = Further Information = Fjdpfx Aszzwufslbogg General information Cab: Day cab License plate: ON-79-NT Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 2,130 kg Payload: 2,870 kg GVW: 5,000 kg Functional Tail lift: Anteo, Rear door Loading platform height: 90 cm Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none

Condition: used, Year of construction: 2005, Overview The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs - Capacity: 15,500 bph - Cell Pitch: 95mm - Bottles per row: 16 - Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 21,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg - YOM 2005 - Formats: - 0,5l - 0,75l The Machine in Detail / Equipment Features - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included Fgsdpfx Aozbha Hslbsg - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Label press mounted to the machine - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge

Year of construction: 2014, condition: ready for operation (used), A pneumatic Swiss-Sonic ultrasonic welding system is offered. 1) Swiss-Sonic UWP 20-1 ultrasonic welding press, year of manufacture 2014, max. pressing force: 3000N, min./max. welding stroke: 0mm/100mm, throat depth: 220mm, height adjustment: 300mm, max. operating pressure: 6bar, cylinder diameter: 80mm, compressed air connection: 8mm, working range: 220mm-520mm, footprint X/Y: approx. 650mm/450mm, machine dimensions X/Y/Z: approx. 430mm/600mm/1530mm, weight: approx. 150kg. 2) Swiss-Sonic ultrasonic generator. Including peripheral equipment. The images do not show the machine for sale. Documentation available. Inspection by appointment. Fedezlt Rwepfx Albsgg

Condition: repair required (used), functionality: not functional, Year of construction: 2006, operating hours: 9,455 h, load capacity: 1,400 kg, battery voltage: 24 V, battery weight: 274 kg, Ameise Jungheinrich ERC 214 The pallet truck is currently not operational: Drive switch defective, new battery required General terms and conditions for the offer: Fodpfoy Dg N Hex Albegg - 100% payment in advance, net without deduction, before dismantling begins and upon receipt of invoice. - The equipment remains our property until full payment has been received. - The purchaser may withdraw from the purchase agreement at any time in writing and without stating reasons until full payment has been made. - Ex stock location, the buyer is responsible for organizing dismantling, loading, and transport of the equipment at their own expense. - The buyer is responsible for proper dismantling and commissioning. - The buyer undertakes to contract only qualified specialists for dismantling. - Dates must be coordinated with KT and adapted to the plant’s operating hours. - Dismantling must be completed entirely up to the supply lines. - All site safety regulations must be observed. - The equipment is sold as inspected and in its current condition, without any guarantee or warranty for material or cosmetic defects.

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: S2926SMA0099.10801, Laminator from the Swiss company 3S ( Swiss Solar Systems ). Data available in photos. Fgodpfxovad Ime Albog

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details - Capacity:  - 6,000 bph - Min/ Max: 3,000 bph – 6,300 bp - Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle - Bottles per row: 12 - Bottles in the machine: 1,080 - Bottle cell carriers: 96 - Dimensions:  - Length: 6,000 mm - Width: 1,545 mm - Height: 2,175 mm (without feet) - Weight: approx. 5,800 kg - Water consumption: 3,6 m³/h - Heat consumption 80°C: 480 kJ/ h x 1000 - Electrical consumption: 11 kW - Incl. Spare parts - Motors for rear and front drive - Bottle cell carriers - Wear parts - Machine body fully in stainless steel - All hot zones with 5cm insulation Fedpfx Aovl Huajlbogg - Label extraction belt - Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar - Self cleaning spray tubes in stainless steel

Condition: refurbished (used), Year of construction: 2020, operating hours: 3,064 h, DG Tech – BLM Group Authorized Inspection Center DG Tech was created as a spin-off of DGService to specifically address the market for used BLM Group machines. Leveraging the experience gained in after-sales service and through ongoing technical training, we offer a comprehensive and reliable service. We manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, dismantling, and transportation directly, eliminating the risks associated with private sales. Fgjdpfxey Ddqne Albog In partnership with BLM Group, we provide dedicated software, technical training, and post-sale support. We also offer flexible operating lease solutions to optimize investment and productivity. LC5 laser cutting machine, for both tube and sheet metal processing. Materials processed: mild steel, stainless steel, aluminum alloys, copper, brass. Automatic transverse sheet metal pallet changer – sheet metal format 3000x1500. Accessories – Active Weld: optical device for locating weld seams on round, square, rectangular, and flat oval tubes – Optional delicate tube loader – Motorized front tube collection table – maximum length 4500 mm – 2D cutting head with: Active Focus – automatic focus adjustment, Active Beam – automatic laser beam diameter adjustment – sensors for automatic control of the protective glass temperature – fiber booster – automatic nozzle changer with 18 positions – Fly Cut software.

Condition: used, power: 109 kW (148.20 HP), Year of construction: 2007, operating hours: 7,455 h, Equipment: all wheel drive, cabin, * Deutz TTV 1145 Kommunal mit Rückfahreinrichung + Drehsitz * 7455 Betriebsstunden * 50 km/H Ausführung * Fronthydraulik * Frontzapfwelle * gefederte Vorderachse * Kommunalanbauplatte * 7 x hydr Anschlüsse vorne * Druckluftanschlüsse 1 und 2 Kreis * 2 x Rundumlicht * Arbeitsbeleuchtung vorne und hinten Fgedjy Ab I Ujpfx Albsg * EHR * Zapfwelle 540/1000 * Ausstellfenster vorne und hinten * 11 x hydr Anschlüsse hinten * Oberlenker hinten * Schlitten für höhenverstellbare AHK * Reifen 480/70R28 BKT ca. 90% * 580/70R38 BKT ca. 90% * deutsches Fahrzeug * Behördenfahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: used, mileage: 37,710 km, power: 240 kW (326.31 HP), first registration: 08/2013, fuel type: diesel, empty load weight: 12,480 kg, maximum load weight: 5,520 kg, overall weight: 40,000 kg, tire size: 295 / 60 R 22.5 / 8mm, axle configuration: 4x2, next inspection (TÜV): 08/2013, driver cabin: day cab, gearing type: automatic, suspension: steel-air, number of seats: 2, total width: 25,500 mm, front tire size: 295 / 60 R 22.5 / 8mm, operation weight: 18,000 kg,

Condition: used, mileage: 46,181 km, power: 238 kW (323.59 HP), first registration: 09/2013, fuel type: diesel, empty load weight: 12,480 kg, maximum load weight: 5,520 kg, overall weight: 40,000 kg, tire size: 315 / 60 R 22.5 / 6mm, axle configuration: 4x2, next inspection (TÜV): 09/2013, driver cabin: day cab, gearing type: automatic, suspension: steel-air, number of seats: 2, total width: 25,500 mm, front tire size: 315 / 60 R 22.5 / 6mm, operation weight: 18,000 kg,

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader Fodpfxszzz Ive Albjgg - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.