Used Stenhoj Lpsp 100T for sale (237)

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot Bljdpeg Rn Efjfx Amren 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Blodpozi Hchefx Amren Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 380 V, pressing force: 100 t, stroke length: 300 mm, operating speed: 9 mm/s, reverse speed: 71 mm/s, table width: 90 mm, table height: 900 mm, throat depth: 520 mm, ram plate length: 3,060 mm, distance table to ram: 500 mm, clearance between the columns: 2,620 mm, oil tank capacity: 200 l, total length: 4,220 mm, total width: 2,335 mm, total height: 3,010 mm, overall weight: 10,500 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, CNC Press Brake COLLY BOMBLED PS 3000 LS 100/3 – 100 tons x 3,060 mm – 8 axes – DELEM DA66W We are offering this CNC press brake from COLLY BOMBLED for sale due to an upgrade of our machine park. This is our own production machine. We are a metalworking company and not a machine tool reseller. The machine is in very good working condition, has been regularly maintained, and has seen little use for its age, with only approximately 220,000 bends recorded. The machine can be viewed and tested in operation at our workshop in France. MAIN FEATURES Manufacturer: COLLY BOMBLED Model: PS 3000 LS 100/3 Year: 2008 Serial number: 085049 Pressing force: 1,000 kN / 100 tons Bending length: 3,060 mm Distance between uprights: 2,620 mm CNC control: DELEM DA66W 2D graphical Number of axes: 8 Number of bends: approximately 220,000 8-AXIS CONFIGURATION Y1 – Y2 X1 – X2 R1 – R2 Z1 – Z2 Motorized COLLY S3001 back gauge. CNC CONTROL DELEM DA66W with 2D graphical interface. Graphical programming of parts and bending sequences, axis management, bending table function, and visualization of bending operations. CONDITION / MAINTENANCE Machine regularly maintained. Hydraulic overhaul recently performed. Inspection and maintenance performed directly by COLLY BOMBLED. All guards and safety equipment are present. Machine is fully functional and available immediately. The sale is solely motivated by an upgrade of our machine park. TECHNICAL DATA Slide stroke: 300 mm Gooseneck: 520 mm Table / slide opening: 500 mm Table width: 90 mm Table height: 900 mm Approach speed: 100 mm/s Bending speed: 9.2 mm/s Return speed: 71 mm/s Motor power: 9 kW Approximate capacity for S235 steel over the entire length with V = 10 x thickness: 5 mm. DIMENSIONS / WEIGHT Height: 3,010 mm Width: 2,335 mm Length: 4,220 mm Weight: approximately 10,500 kg LOCATION / LOADING Machine located in our Metal360 workshop in France. Machine can be viewed and tested in operation by appointment. The building allows for lifting and loading the machine directly onto the truck, which facilitates its removal. Operating video and additional photos available upon request. Price: €34,900 (excluding VAT) Blsdpfozybffox Amrsn Machine available immediately.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 12 kW (16.32 HP), cutting width (max.): 4,200 mm, Nimac Atlas 100T , Beam Saw , Year 2021 Bsdpfxezg Tfqj Amreln With bac Loading and front loading , Very Good condition Fully Functional Great Price ! For More Info please contact Us !

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Screw Compressor STENHOJ CK15AP (screw stage by ATLAS COPCO), mounted on a 500L tank with air dryer. Technical Data: Capacity: 1.20 m3/min; Pressure: 15 bar; Motor power: 11 kW; Operational hours: 10,600 h Bedpfx Ajw Awzqomrsln Year: 2003. Price: 11,200 PLN net Price: 13,776 PLN gross The compressor is fully functional; We provide service support. The link below shows a video demonstrating the machine in operation.

Condition: used, total length: 1,250 mm, total width: 2,100 mm, total height: 3,300 mm, Colour: Green Empty weight: 7.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 20 - Max. stroke [mm]: 140 - Table length [mm]: 580 - Table width [mm]: 780 - Ram width [mm]: 400 - Throat depth [mm]: 315 - Max. opening height [mm]: 560 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 360 - Transport dimensions: 1250mm x 2100mm x 3300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Bsdpfezrxr Tsx Amrjln

Year of construction: 2007, condition: excellent (used), screw compressor STENHOJ 18,5kw COMPLETE Screw compressor STENHOJ S18-10 (COMPAIR screw stage) machine on tank with air dryer after service Bedpfx Amsmx Rvwerjln Technical data: capacity: 2600 L/min; 18.5KW motor; 10 bar pressure; mileage 1337h!!! 2007; compressor fully operational. net price: 15800 zł gross price: 19434 zł

Condition: used, Year of construction: 1948, total length: 1,900 mm, total width: 1,250 mm, total height: 2,650 mm, Colour: Green Empty weight: 5.000 kg - Year: 1948 - Documentation available: No - CE certificate present: No - Serial number: 100150 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 13 - Max. stroke [mm]: 127 - Table length [mm]: 650 - Table bore diameter [mm]: 650 - Ram width [mm]: 250 - Throat depth [mm]: 310 - Max. opening height [mm]: 330 Bledpfx Asz Au Uljmren - Height adjustment [mm]: 80 - Pressing speed [mm/s]: 235 - Transport dimensions: 1900mm x 1250mm x 2650mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, functionality: fully functional, Eccentric press for sheet metal processing with tools. Bljdoytykzepfx Amrjn

Condition: used, Year of construction: 2011, total length: 4,800 mm, total width: 1,800 mm, total height: 2,250 mm, Colour: Grey Weight: 8.200 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 91898 - Drive system: CNC - Control system brand: HACO - Control system type: ATL 565 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 100 - Max. working width [mm]: 3600 - Column gap [mm]: 3300 - Throat depth [mm]: 250 - Backgauge depth [mm]: 600 - Max. stroke [mm]: 120 - Crowning system: Mechanical - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4800mm x 1800mm x 2250mm (l x w x h) - Transport weight [kg]: 8200kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Blodpfx Ajztxlvjmrjn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: Bsdpfx Aez Hcz Somreln - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: used, Colour: Green Empty weight: 8.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 1000 Bledpfxszxhxij Amrsn - Table width [mm]: 600 - Table bore diameter [mm]: 140 - Ram length [mm]: 300 - Ram width [mm]: 300 - Height adjustment [mm]: 250 - Column spacing length [mm]: 2000 - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Eckold tool ECKOLD - WT 100T MACH-ID 9694 Blsdpfxjz Arlne Amron Make: ECKOLD Type: WT 100T Year: 2018 Type WT 100 T / NFW Forming method Planishing and calibrating Special features Exchangeable inserts suitable for Finishing with custom-shaped tools Sheet thickness Steel (Rm = 400 mm2) 3.0 mm Sheet thickness Stainless steel (Rm = 600 mm2) 3.0 mm Sheet thickness Al (Rm = 250 mm2) 3.0 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: repair required (used), Year of construction: 2003, operating hours: 24,700 h, functionality: limited functionality, Year of manufacture: 2003 NC rotary table: C-axis, Ø800x620 Swiveling milling head: B-axis, 0-90° Travel: X 1080 Y 710 Z 710 Control system: iTNC530 Internal cooling pressure: 40 bar Internal air blow External cooling Spindle speed: max. 12000 rpm Tool holder: SK40 Tool magazine: 32 positions Measuring probe: Infrared, Heidenhain Electric handwheel: Heidenhain Rotating viewing window: Rotoclear Blodpfx Amsy Tadversn Chip conveyor Oil mist extraction Coolant system with paper band filter Chip flushing gun Work area light Clamping fixture (next to the rotary table) for longer workpieces The clamping mechanism of the milling head is leaking/defective on this machine.

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 99 h, input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 265 mm, operating speed: 145 mm/s, reverse speed: 210 mm/s, table width: 3,100 mm, table height: 890 mm, throat depth: 410 mm, clearance between the columns: 2,600 mm, total length: 4,320 mm, total width: 1,795 mm, total height: 2,630 mm, overall weight: 7,600 kg, Equipment: CE marking, documentation/manual, safety light barrier, Demo Delivery time - in stock price 41000 EUR Pressing force 100 tons Bending length 3100 mm 4 axis (Y1,Y2, X, R) motorsed crowing Stroke 265 mm Distance between walls 2600 mm Throat depth 410 mm Hydraulic drive Lowering speed 210 mm/s Rotational speed 145 mm/s Rear bumper travel in the X axis 750 mm Rear bumper travel R axis 250 mm Table height 890 mm Blodpof Eytlofx Amrjn Engine power 7.5 kW Length 4320 mm Width 1795 mm Height 2630 mm Weight 7600 kg STANDARD EQUIPMENT: Hydraulic drive 4 axes (Y1, Y2, X , Z and R) CYBELEC 12 colorful graphic controls - 17" color touch screen - 3D imaging in simulation and production - Suitable for full Windows applications - USB interface and peripheral interface - Support for user-specific applications Rear bumper driven by a servo motor on linear guides and ball screws CNC controlled crowning Top tool EUROSTAMP 1260, H:67, 85° R:08 (set 835mm x length) EUROSTAMP 2067 lower tool, 4 slots V=16-22-35-50mm, 85° H:60 (set 835mm x length) Fiessler AKASam laser safety device mounted on the upper beam Arms supporting the sheet on the linear guide Front and rear laser security system Equipment compliant with CE regulations User manual in POLISH, GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - higher productivity compared to classic hydraulic presses -low energy consumption - compact drive spindle assembly with few individual components Available immediately from stock.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9174, total height: 3,400 mm, ram adjustment: 100 mm, installation height: 530 mm, total width: 2,150 mm, total length: 1,450 mm, pressing force: 100 t, clearance between the columns: 830 mm, overall weight: 15,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 100 t, The machine is completely overhauled and finished, including new Siemens S1500/MTP1000 press control. Upright spacing: 830 mm Distance table to ram: 530 mm Stroke adjustment: 10 - 120 mm Ram adjustment: 100 mm Ram strokes/minute: 30-120 Delivery time: immediately Bljdpfx Ajx U Ucpsmron Price on request

Condition: used, Single-column eccentric press KIESERLING & ALBRECHT, type PEDRU 100 Factory No. 549150, Year of manufacture 1990 Pressing force 100 tons Reach 320 mm Frame opening at the rear 400 mm Table size 830 x 600 mm Ram size 600 x 355 mm T-slot hole Ø 50 mm with clamping piece Table height above floor 880 mm Ram stroke 8 - 129 mm Ram adjustment travel 80 mm Installation height approx. 350 mm (with table insert plate) Stroke rate approx. 55 strokes/min Motor power 11 kW Drive power 400 Volt, 50 Hz - Overload protection in the ram with shear plate Bsdpfx Amoz Alg Ssrsln - Ram weight compensation cylinder - Automatic centralized lubrication with motor drive - Pneumatic clutch-brake combination - Pneumatic auxiliary brake DESCH - Table clamping plate 90 mm thick - Electric foot switch and 2-hand operation - Control cabinet fixed to the machine - Press control with SEZ, OTR and ZBS - UVV 11.062 § 9 Para. 3 (Safe for manual feeding operations) - Draw cushion or ejector in the table plate (custom-built) Ø 125 mm, stroke 50 mm - currently not functioning Space requirement L x W x H 2000 x 2000 x 2880 mm Weight of the press 10 tons Good condition

Condition: used, Industrial Hydraulic Press, Hydraulic press, 100t press, C-frame hydraulic press, HYDRAP PRESSEN HPS ZB 100, Used machine Manufacturer: HYDRAP PRESSEN GmbH (Plüderhausen, Germany) – Premium manufacturer of industrial press machinery Type: HPS ZB 100 Serial number (Fabrik-Nr.): 6535 Year of manufacture (Baujahr): 1991 Weight: 14 700 kg Condition: Used, heavy-duty industrial design Technical and operating parameters: Permissible load / Pressing force (Zul. Belastg.): 1000 kN (approx. 100 tons capacity) Effective stroke (Nutzhub): 300 mm Drive type (Antriebsart): Hydraulic (HYDR.) Supply voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Type of current (Stromart): D (Three-phase AC / Delta configuration) Drive power (Antr.-Leistg.): 45 kW Rated current (Nennstrom): 90 A Bodpfszk Amrox Amrjln Oil viscosity (Öl-Viskos.): HLP 46 Oil capacity (Ölmenge): 780 liters Stopping distance (Nachlaufweg): 34 mm Stopping time (Nachlaufzeit): 112 ms Safety distance (Sicherheitsabstand): 192 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 30,195 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,080 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: Millplus IT, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 100T was manufactured in 2003. It features impressive travels of 1,080 mm in the X-axis, 635 mm in the Y-axis, and 710 mm in the Z-axis. The machine includes a fully refurbished Nikken CNC rotary tilting table and an Erowa Robot Easy automation system with 12 pallet stations. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 100T universal machining centre we have for sale. Contact us for further details. • Axes: 5-axis (X, Y, Z + A, B) • Condition note: Spindle collided with workpiece and is currently seized. Advised that it can be rebuilt/reinstalled by a specialized service company; estimated parts cost approx. €7,000. Additional equipment • Automation: Erowa Robot Easy system with 12 pallet stations Bledezlgxujpfx Amron • Workholding: Erowa zero-point clamping system (extensive set) • Rotary/tilting table: Nikken CNC rotary tilting table (fully refurbished in 2016) Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Bledjykl Iaspfx Amrsn Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 250 t, table width: 1,120 mm, table length: 800 mm, total length: 25,800 mm, total width: 13,500 mm, total height: 29,750 mm, overall weight: 12,800 kg, height adjustment type: mechanical, stroke adjustment: 140 mm, Equipment: documentation/manual, Eccentric Press LE 250C. Year of manufacture: 1989 (ZTS - SLOVAKIA). New control cabinet according to the original schematic, central lubrication pump. Max. pressing force: 250 tons. Stroke: 30–140 mm. Max. number of strokes per minute: 45. Slide adjustment: 110 mm. Maximum slide-to-table distance: 450 mm. Slide clamping area: 800 x 475 mm. Table clamping area: 1120 x 800 mm. Motor power: 20 kW. Dimensions (Height x Width x Length): 2975 x 1350 x 2580 mm. Weight: 12,800 kg. Bljdpjtq Eqxsfx Amron

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm Bjdeu N A U Iepfx Amreln table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Bsdezxmimjpfx Amroln Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Condition: like new (used), Year of construction: 2008, Sangiacomo T250 RCE Blodpfx Aez D T A Ijmrsn

Condition: used, Year of construction: 1979, Technical details: Bljdpeu Nfinsfx Amrsn pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *