Used Stego Hvl 031 for sale (295)

Condition: used, Thermal system, fan heater -Space-saving fan heater: HVL 031 Djdpfeff Nmfex Ab Tekp -Power: 225 W -Price: per piece -Number: 2 pieces -Dimensions: 90/130/H160 mm -Weight: 0.9 kg/piece

Condition: used, Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater -Manufacturer: Stego, switch cabinet heating -Type: CSF 060 -Power: 150 watts Djdpsf Rluqsfx Ab Tskp -Voltage: 120-240 V -Dimensions: 150/60/H90 mm -Weight: 0.4 kg

Condition: used, Thermal systems, fan heaters, heating elements -Space-saving fan heater: HVL 150 -Power: 150 W -Price: per piece Dsdpfx Absff Nmgs Tokp -Number: 4 pieces -Dimensions: 110/105/H60 mm -Weight: 0.5 kg/piece

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Dkedpezhntrsfx Ab Tjp

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 16,201 h, load capacity: 25,000 kg, lifting height: 6,050 mm, fuel type: diesel, mast type: triplex, construction height: 3,900 mm, motor manufacturer: volvo, fork length: 2,390 mm, fork width: 250 mm, Equipment: cabin, lighting, pallet forks, Brand: Valmet Type: TD031 Drive-through height: 390 cm Lifting height: 605 cm Capacity: 25,000 kg Drive: Diesel Year of manufacture: 1992 Operating hours: 16,201 3+4+5 valve (side-shift, hydraulic fork adjustment, hydraulic leveling) Triplex mast Pneumatic tires (front twin tires) Fork length: 239 cm Fork width: 25 cm Forks together, outside: 85 cm Dedpfxjwuqpfs Ab Tokp Forks apart, outside: 288 cm 6-cylinder Volvo engine Enclosed cabin

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: TET031P5 - 2200320948, cooling capacity: 8.98 kW (12.21 HP), type of input current: three-phase, type of cooling: water, overall weight: 331 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 1.5 m³/h, pump pressure: 5 bar, total width: 660 mm, total length: 1,315 mm, total height: 1,373 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler/chiller/chilled water unit, air-cooled, Type: TAEevo Tech 031 P5-NF MTA S.p.A. TAEevo Tech 031 P5-NF are air-cooled, compact chilled water units suitable for outdoor installation (-5°C to +46°C). Includes crankcase heater, phase monitoring, 115-liter buffer tank, built-in P5 high-pressure pump, open expansion tank (14 liters), and evaporator in a NON-FERROUS design. Chilled water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 8.98 Chilled water temperature outlet/inlet (°C): 7 / 12 Volume flow (m³/h) 1.5 Available pump pressure (bar) 5 Ambient temperature (°C) 32 Refrigerant R 410A Dkodpswzk Egsfx Ab Top Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 6.6 Max. current (A) 12 Starting current (A) 47 Protection class: IP54 Dimensions: Length (mm) 1315, Width (mm) 660, Height (mm) 1373, Weight (kg) 331 Connection Rp 1" Serial No.: 2200320948 Year of manufacture 2018 Condition: Visually 2, Technically OK Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty Used machines may have visual defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 1968, pressure 150 t throat 450 mm stroke 115 fix mm no. of strokes 45 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 2250 x 1090 mm table height over floor 900 mm passage to the back 1900 mm ram surface 1900 x 900 mm Dsdpfx Asyx Il Sob Tskp ram adjustment 100 mm power requirement 16,0 kW weight 19,5 t Dimensions (WxDxH) 3,0 x 2,3 x 3,9 m with motor, pneumatic clutch, fix stroke, motoric ram adjustment, pneumatic counterbalance in ram, fix table, throat 360 mm, manual centralized lubrication as is where is, WITHOUT putting into operation

Condition: good (used), 25 HP, 10 bar, 2570 l/min Dksdpjxliv Asfx Ab Tep

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Output: 311Kw Мы говорим по русски! Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Dkjdpfx Abetu Trus Tsp Of course we also take care of all formalities Loading possible

Condition: new, For sale: brand new three-phase electric motor from renowned German manufacturer Motore Ehlert GmbH. The motor is factory new, kept in storage, never used. Visual and technical condition is perfect, ready for installation. Technical specifications: Manufacturer: Motore Ehlert GmbH Type: 1TZ9003 1AB53 4AB4 Z Power: 3 kW Rotational speed: 1460 rpm Voltage: 400V 50Hz Current: 6.2 A Efficiency class: IE3 Protection rating: IP55 Insulation class: F Size: 100L Mounting: IM B3 Weight: approx. 27 kg Application: Dodpfjyv R Nhex Ab Tokp Designed for industrial use, ideal for pumps, fans, production machinery, and other industrial applications. Condition: New

Condition: new, Wilo MHI403-1/E/3-400-50-2/B pump, serial number: 4024295, unused, 100% functional, scope of supply as shown in the photos. Dodpfx Abezkda Hj Tskp

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet, transformer -Type: DG -Item No.: 603133 Dodpezi Sglefx Ab Tekp -Power: 960 VA -Voltage: 380V / 24V -Technical data: see photo of the nameplate -Dimensions: 240/210/H225 mm -Weight: 15.4 kg

Condition: used, “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Quantity: > 100 units Dsdpfezi Dr Hox Ab Tekp Siemens Sinumerik 6FC5303-1AF30-0AA0 MPP 1500D Push Button Panel Control Panel MPP 1500D Connection: Industrial Ethernet AND PROFINET with connection for HT8

Condition: used, Year of construction: 1998, pressure 3500 t stroke 900 mm Distance table / ram, stroke down 1000 mm distance table / ram, stroke up 1900 mm table surface area 3150 x 2150 mm ram surface 3150 x 2150 mm Total Weight of Tool max. 30,0 t Weight of Tool Top Part max. 20,0 t speed down 400 mm/s working speed 0,9 - 9,2 mm/s Hydraulic Operating Pressure 280 bar oil volume 5500 l rated current 760 A voltage 400 V frequency 50 Hz power requirement 425 kW weight 231,0 t SPECIAL DEAL as is where is, stored in dismantled condition WITHOUT putting into operation / WITHOUT additional work free loaded to truck Dodsvuukhopfx Ab Tskp Hydroformpress / IHU-Press maximum preforming force approx. 1000 t Total tool weight approx. 30 t upper tool weight approx. 20 t · Die function interface: 4 controlled axis, 3 b/w functions slide, 4 b/w functions bed · Parallelism control: over the length side of the press · Light curtain: front and back side · Light barrier: left and right side · Slide locking: TDC-Position · Two-hand control panel: 1 · Independent high pressure circles water hydraulic system: 2 · Max. working pressure: 3.000 bar · Displaced volume of each Intensifier: 3,74l · 2 Filling pumps: volume and pressure depending the power grid · Location of pressure intensifier: to be determined · Main pumps: located on the press crown/oil tank · One die change table: 6,7 x 2,15 m · Max. die size: 3,15 x 2,15 m · Clamps on slide: Hydraulic · Clamps on the bed: Mechanical · Electrical control: Schuler Multiview HF Attention: This machine is a EU re-import! If the machine is to be installed and operated in the EU, it must be adapted to the currently valid EU directives of the country of installation before it is put into operation This work is not part of the offered price

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood, automatic feed and return of the saw carriage, infinitely variable control of feed rate, saw blade height, and cutting lengths, pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, three-phase brake motor 6.8 HP / 5 kW and scorer unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm, good condition, machine ready for immediate use for further technical details, see pdf file (brochure) located in Neustadt/Weinstr. Dkjdpfx Aoyzxkwsb Tsp Transport available at additional cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Year of construction: 2010, operating hours: 21,431 h, condition: ready for operation (used), controller manufacturer: SIEMENS, number of axes: 3, This 3-axis PERO V4 / 024 – Ex 7031 was manufactured in 2010. It features a maximum load capacity of 650 kg and a total heating capacity of 65 / 6.6 kW. The machine is equipped with a Siemens SIMATIC Panel Touch Screen Control for ease of operation. If you are looking to get high-quality cleaning system capabilities, consider the PERO V4 / 024 – Ex 7031 automation system we have for sale. Contact us for further details. Dkodozimxvjpfx Ab Tsp - machine description: cleaning system- Operating Voltage: 400 V- Frequency: 50 Hz- Nominal Current: 121 A- Total Heating Capacity: 65 / 6,6 kW- Estimated Current Operating Hours: ~26,000 h (Status July 2026: 25,705 h logged on panel)- Working Hours: 21,431 h (Logged on panel)- Total Batch Counter: 69,216- Daily Batch Counter: 175- Vacuum Pump Service Counter: 366 h- Maximum Load Capacity: 650 kg- Cleaning Medium: Perchloroethylene (PER)- Control System: Siemens SIMATIC Panel Touch Screen Control

Condition: used, Year of construction: 2001, Demag ergotech concept 800/420-310 (2001) Dksdpfeyyzqwsx Ab Tjp

Condition: ready for operation (used), KNOLL TS40-21/30 586 Centrifugal pump, 200318477, serial number: 210926, used, in good condition, 100% functional, scope of delivery as shown in the photos. Djdpfozh Sc Dex Ab Tjkp

Condition: new, Pompes EVA VM 80 SCM pump, serial number: 118369, with Siemens 1AV3112B 1LE10031BB234FB4-Z motor, unused, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request separate quotes for packaging and shipping costs! Dkjdpszh Sdhefx Ab Tjp

Condition: not inspected (used), Indramat MOD17/1X0031-252 974702 CONTROLLER: TDM4..-020-300-WO MOTOR: MAC041A-.-FS I (CONT.)= 4A I (PEAK)= 8A NO-LOAD SPEED= 6000 rpm MA: 375mV/A Dedpfezkdyyjx Ab Tekp INPUT E1/2

Condition: used, Year of construction: 2017, Used 3-meter press brake from Safan Type: E Brake 100 3100 Capacity: 3100 x 100 tons Djdpfx Ajzh Ibvob Tekp Y1, Y2, X, Xdelta, R, Z1, and Z2 are CNC-controlled E Control Hydraulic WILA top clamping system 1 set of complete tooling Year of manufacture: 2017

Condition: used, “From the production facility of an automotive supplier, technically inspected, fully functional.” Quantity: More than 10 available. Djdpfx Abjzh A Nue Tekp

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,259 h, load capacity: 3,000 kg, lifting height: 3,100 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,240 mm, fork carriage width: 1,120 mm, fork length: 1,800 mm, empty load weight: 5,614 kg, total length: 2,317 mm, drive type: Elektro, construction width: 1,198 mm, Electric 4-wheel forklift Load center: 500 mm Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: Very good Front tires type: Super elastic Front tires size: 23x10-12 Front tires condition: 40 - 60% Rear tires type: Super elastic Rear tires size: 200/50-10 Rear tires condition: 20 - 40% Battery voltage: 80V Battery capacity: 620Ah Battery manufacturer: Jungheinrich Battery type: PzS Year of battery manufacture: 2020 Battery condition: 60 - 80% Dodpjzhyg Refx Ab Tskp Description: Inspection and safety check (UVV) newly completed Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, front windscreen, half cabin, heater, road-legal (STVZO), full cabin, safety light, 2-pedal control, joystick (Duo-Pilot), ultra comfort seat (fabric + air-suspended), hydraulic steering, spring-loaded brake, multi-color display, seat heating, rear floor spot, LED work lights, battery can be reconditioned on request (at extra cost)

Condition: excellent (used), Year of construction: 2013, Number of axis: 3 Dedpfjzhni Tex Ab Tekp Reach: 2000 mm Payload: 8 kg X- 905 mm Y-1200 mm Z-2000 mm with console height 50cm see in pictures Model: Wittmann W828-311 Controller: CNC 8.2 Main Specifications 1. Number of axes: 4 (X, Y, Z + pneumatic C axis) 2. Z stroke: 2000 mm 3. Y stroke: 1200 mm 4. X stroke: 905 mm 5. C axis: 0–90°, 15 Nm, pneumatic 6. B axis: Servo 7. A axis: Not installed Equipment 1. Euromap standard mounting bracket (500 mm height) 2. 4 vacuum circuits 3. Venturi vacuum generator with blow-off function 4. 2 additional valves for mold air blow-off 5. Y-axis quick coupling according to LEGO specification 6. VDMA E12 interface (LEGO specification) 7. Conveyor synchronization (Band Takt) 8. Digital I/O No. 1 and No. 3 9. Operator interface in Danish 10. Operating manual in Danish

Condition: good (used), Year of construction: 1987, geared motor, electric motor -Speed: 13 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 20 mm Djdeb A R Acspfx Ab Tskp -Protection class: IP 54/65 -Weight: 17 kg