Used Spirax Sarco Phs Easiheat for sale (478)

Year of construction: 2017, condition: good (used), Spirax Sarco PHS Easiheat Heat exchanger system Ljdpfsz I Dv Hex Ab Aohn 2017, Pre assembled skid mounted packaged heat exchanger system, touch screen control, with Alfa Laval heat exchanger, see plates for all spec

Condition: used, Spirax Sarco Clean Steam Generator Station – 700 kg/h – Year of Manufacture 2019 For sale is a steam-heated clean steam generator station from the manufacturer Spirax Sarco with a clean steam capacity of approximately 700 kg/h. The system consists of a horizontal clean steam generator with an integrated tube bundle heat exchanger, a condensate cooler for feedwater preheating, and a fresh water feed via a control valve. Technical Data Manufacturer: Spirax Sarco GmbH System Type: Clean Steam Generator Station Serial Number: 2019/955 Year of Manufacture: 2019 (according to serial number, to be confirmed) Clean Steam Capacity: approx. 700 kg/h Clean Steam Pressure: 0.8 bar(g) Heating Steam Quantity: approx. 770 kg/h Heating Steam Pressure: approx. 3.5 bar(g) Total Power Output according to Design Data: 531 kW Lhsdpfx Abowgkyho Asn Feedwater Inlet: 15 °C Minimum Feedwater Pressure: 2 bar(g) Feedwater Quality: according to EN 285 Clean Steam Generator Design: horizontal, with pull-out U-tube bundle Design Pressure, Tube Side: 10 bar Design Pressure, Shell Side: 3 bar Design Temperature: 200 °C each Diameter: approx. 711 mm Length: approx. 2,600 mm Height: approx. 1,400 mm Thermal Output: 452 kW Tube Bundle: Stainless steel 1.4571 Insulation: approx. 100 mm mineral wool with galvanized steel sheet cladding Condensate Cooler / Feedwater Preheating Type: Plate heat exchanger Type: Alfa Nova 27-10H Manufacturer: Alfa Laval Capacity: 61 kW Design Pressure: 25 bar Design Temperature: 225 °C Condensate Quantity: approx. 770 kg/h Feedwater Quantity: approx. 700 kg/h Equipment Control cabinet and control system Electropneumatic pressure control valve Safety and shut-off valves Condensate trap and drain group Pressure sensors and manometers Level control with low water alarm Piping and connecting fittings Base frame with support saddles The system was designed and manufactured in accordance with the European Pressure Equipment Directive applicable at the time of manufacture. Further technical documentation is available upon request. Inspection possible by appointment.

Condition: ready for operation (used), Year of construction: 2003, A pure steam generator from the manufacturer Apparatebau Wärmetechnik GmbH, which was distributed by Spirax Sarco, is for sale with a condensate collector. Heat output: 446kW, max. operating pressure in the tubes/around the tubes: 13bar/6bar, operating temperature min./max.: -10°C/200°C, volume in the tubes/around the tubes: 33l/621l, medium in the tubes/around the tubes: saturated steam/steam. Documentation available. An on-site inspection is possible. Lhsdpfx Abozbl I Us Asn

Condition: like new (used), The cylinder head has a crack, but this should not affect its function. Ljdpfezb Axwjx Ab Ashn

Condition: like new (used), Spirax Sarco BSA2T Bellows Sealed Shut-off Valve DN200 PN25 NOS Unused Spirax Sarco bellows sealed shut-off valve from stock. High-quality industrial design for steam, condensate and process media. Includes counter flanges. Manufacturer: Spirax Sarco Type: BSA2T Valve Type: Bellows Sealed Shut-off Valve Nominal Size: DN200 Nominal Pressure: PN25 Series: BSA2T Design: Bellows Sealed Valve Seal Type: Bellows Seal Connection: Flange Pressure Stage: PN25 Maximum Operating Pressure: 25 bar(g) Maximum Temperature: 350 °C Body Material: Spheroidal Graphite Cast Iron SG Lhsdezb Rdhepfx Ab Aen Designation: EN-JS 1025 Flow Direction: indicated Handwheel Operation: Yes Counter Flanges: included Country of Manufacture: United Kingdom Condition: NOS New Old Stock

Condition: used, functionality: fully functional, Year of construction: 2002, stroke length: 350 mm, throat depth: 500 mm, operating speed: 80 mm/s, reverse speed: 90 mm/s, overall weight: 16,500 kg, total length: 4,650 mm, total width: 2,150 mm, total height: 3,200 mm, input voltage: 380 V, pressing force: 160 t, clearance between the columns: 3,300 mm, table width: 4,175 mm, Equipment: CE marking, documentation/manual, safety light barrier, CYBELEC DNC 80 control system 6 controlled axes: Y1-Y2-X-R-Z1-Z2 Lhsdpfxjzybrrj Ab Ajn Active hydraulic compensation LASER safety barriers Standard tool kit CE marking

Year of construction: 2018, condition: used, Liquid filling line composed of: 1) RUDOLF DECKERT FILLING MACHINE, MODEL DFM412R CHARACTERISTICS - Year of construction: 2009 - Tension: 400 V/3 Ph/N - Rated frequency: 50 Hz ----- 2) RUDOLF DECKERT CAPPING MACHINE, MODEL AVR400 Intermittently operating monobloc capping machine, with linear design, can be expanded with additional workstations. For the processing of several different closure types. Built in 2010. CHARACTERISTICS - Output up to: 150 BPM - GMP-compliant design - Tension: 400 V/3 Ph/N/PE - Rated frequency: 50 Hz ----- 3) RUDOLF DECKERT BOTTLE DEPOSIT, MODEL PT200 Built in 2008. ----- 4) RUDOLF DECKERT ROTATING TABLE, MODEL DT1500 Rotating table in stainless steel. Built in 2010. CHARACTERISTICS Lhodpfj Ad Nvqex Ab Aon - Dimensions: 1640 x 1640 x 1300 mm - Table diameter: 1500 mm - Product entry/exit width: 880 mm - Weight: 150 kg ----- 5) ETIBE LABELLING MACHINE, MODEL HKM10/RE For the application of adhesive labels to ampoules or other cylindrical containers. Built in 2009. CHARACTERISTICS - Printing device: Metronic M03.1 hot printing device - Control panel: PLC Siemens S7-200 - Output: 18,000 objects/hour (max) - Label height: 80 mm - Object diameter: 13 - 60 mm ----- 6) WIPOTEC CHECKWEIGHER, MODEL HC-A Dynamic checkweigher with V2A/AISI 304 stainless steel frame. Built in 2020. CHARACTERISTICS - Display: 15'' color TFT display, with touchscreen - Temperature range: +5 to +40 °C - Noise level: under 70dB(A) - Max output: 600 pcs/min - Rated frequency: 50/60 Hz - Connect load (power capacity): 0.8 kVA (ca) - Size: 1,591 mm x 440 x 900 mm - Weight: 250 kg

Condition: excellent (used), Year of construction: 2021, 2021 Baykal APHS 41240 4-Axis CNC Press Brake with Delem DA-66T Control Lhodpfe Ad Duuox Ab Asn Pressure: 240 tons. Bending length: 4100 mm. Control: Delem DA-66T. Axles: Y - beam up/down, X - stop approach and bending distance setting, R - stop up/down, Crowing (bending angle compensation). Power supply: 3-phase. S/No: 28635. Note: Equipped with a large set of bending tools. S/No.28635 (10/2021). Note: Machine located in Czestochowa, Poland.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 300.07.009.10, functionality: fully functional, - 3-axis FORMAT4 PROFIT H22 2012 with rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking for high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT. - Frequency (Hz): 50.0 Hz - Phase (Ph): 3.0 - Power (kW): 15.0 kW - Duty Cycle: S6-40% - Current (A): 36.0 A - Work Table Type: Pod and rail/console vacuum bed with 6 movable support rails and vacuum suction cups - Tool Changer: Linear rack tool changer mounted under the gantry rail, plus an additional pick-up/aggregate station. Included Equipment: Foot pedal control switch, compressed air hose reel, central dust extraction ducting with flexible hose connectors, energy chain cable carriers, safety floor matting with boundary zone marking. Machine Height: 2350 mm Machine Length: 6000 mm Number of Axes: 3 Tool Stations: 8 Spindle Power: 12 kW Spindle Speed: 24000 RPM X-axis Travel: 3060 mm Y-axis Travel: 1210 mm Z-axis Travel: 100 mm Lodpfxsz Nwa Nj Ab Aehn

Year of construction: 2022, operating hours: 8,760 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 001, We are selling our fully automated container farm, type FarmFlex, manufactured by Urban Crop Solutions (Belgium). The system was newly built in 2022 and commissioned on September 1, 2022. It is used but in very good technical condition. Lodjz Tqzuopfx Ab Ajhn Key features: 40' high-cube refrigerated container (insulated), approx. 12.2 x 2.4 x 2.9 m, approx. 8 tons 2 stainless steel racks, each with 4 levels, 32 growing tables (≈ 35 m² growing area) Ebb and flow irrigation in a closed loop, 2 tanks à 700 L Automatic pH and EC control with nutrient dosing, UV-C disinfection Dimmable LED lighting (up to 300 µmol/m²s), air conditioning unit, CO₂ control PLC control based on Beckhoff, online operation and visualization Complete documentation available (CE, operating manual, circuit diagrams, acceptance report) Successfully tested with sea asparagus, microgreens, and herbs. Connection: 400 V / 40 A, water, wastewater, internet. New price in 2022: €115,000 net. We will handle dismantling and transport within Germany. International transport upon request. Spare parts package, growing accessories, and growing recipes available optionally upon request. Available immediately, viewing in Aachen by appointment.

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, documentation/manual, Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel ranges x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410 ENGLISH: Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Ledpfsz Dun Eex Ab Aohn Travel paths x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Year of construction: 2022, condition: ready for operation (used), Compressed air station manufactured in 2018. This Ingersoll Rand D480EC-A is part of a complete turnkey industrial system, featuring a primary rotary screw compressor, air treatment dryers, and buffer tanks. It includes a 2,000-litre pressure vessel and multiple refrigeration air dryers. If you are looking to get high-quality compressed air capabilities, consider the Ingersoll Rand D480EC-A machine we have for sale. Contact us for further details. Lhjdpj Adrpaofx Ab Ajn INGERSOLL RAND RS30i-A9.6-TAS- Machine Type: Oil-Flooded Rotary Screw Air Compressor (Total Air System / TAS Configuration)- Nominal Power / Input Shaft Power: 30 kW (40 HP)- Maximum Allowable Working Pressure: 9.6 bar (138 psi)- Flow Rate / Air Capacity (FAD): ~4.7 - 5.2 m³/min (164 - 184 CFM)- Motor Speed: 2970 rpm- Electrical Supply: 400 V / 3 Phase / 50 Hz- Gross Mass / Package Weight: 1150 kg- Sound Level: 69 dB(A)- Integrated Features: Xe-70M Microprocessor Controller, Integrated Refrigerated Air Dryer, Moisture Separator, Dual-Stage Coalescing Air Filters, Heavy-Duty Pre-Filters, High-Efficiency TEFC IP55 Main Motor- Piping Connections: 1.5" NPT DischargeINGERSOLL RAND RSE37n-A13- Machine Type: Rotary Screw Air Compressor- Installed Motor Capacity: 37 kW- Stage Pressure: 13 bar- Debit Volume / Air Flow Capacity: 6,90 m³/min- Suction Pressure: 1,0 bar- Full Load Current: 81 A- Motor Speed: 3600 rpm- Air End Model: EK140NK- Version: V4- Voltage / Phase / Frequency: 400V / 3 Ph / 50 Hz- Compression Medium: Luft- Total Weight: 952 kgINGERSOLL RAND D600EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,70 kg)- CO2 Equivalent: 3,016 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D480EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,20 Kg)- CO2 Equivalent: 2,129 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D240EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 0,84 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (0,40 Kg)- CO2 Equivalent: 0,710 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)STIA DRUCKBEHÄLTER 2000L- Machine Type: Vertical Compressed Air Storage Vessel / Receiver Tank- Volume: 2000 Litres- Maximum Allowable Pressure (PS): 10 bar- Test Pressure (PT): 14.3 bar- Minimum / Maximum Allowable Temperature (TS): 0 / 50 °CW+Z ROHRSYSTEM-TECHNIK DTS-40-HPI- Machine Type: High-Temperature Pressure Vessel / Buffer Tank- Maximum Allowable Pressure (PS): 16 bar- Minimum Allowable Pressure (PS): 0 bar- Minimum Allowable Temperature (TS): -10 °C- Maximum Allowable Temperature (TS): 250 °C- Volume (V): 71 L- Test Pressure (PT): 28.

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Lodpozvvc Dsfx Ab Ajhn Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Voltage: 380 V Phases: 3 Ph Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,180 h, total height: 1,070 mm, total width: 1,120 mm, overall weight: 211 kg, travel distance X-axis: 294 mm, travel distance Y-axis: 211 mm, travel distance Z-axis: 144 mm, product length (max.): 740 mm, number of axes: 3, This 3-axis 3DSYSTEMS ProJet MJP 2500 Plus was manufactured in 2019. It features a build volume of 294 x 211 x 144 mm and a build material capacity of 352.4 kg. The printer is equipped with the MJP EasyClean System for automatic support material removal. If you are looking to get high-quality 3D printing capabilities, consider the 3DSYSTEMS ProJet MJP 2500 Plus machine we have for sale. Contact us for further details. - Machine Dimensions: 112 x 74 x 107 cm - Machine Weight: 211 kg - Voltage: 100 - 240V~ - Frequency: 50/60 Hz - Phase: 1 PH - Current: 12 - 9.5A - Software: 2 lifetime 3D Sprint licenses - Included Platforms: 2 print platforms - Included Accessories: MJP EasyClean System (steam bath for automatic removal of support material) Lodpfjz U Ap Hsx Ab Ashn

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 962157, type of input current: AC, input voltage: 230 V, overall weight: 3,500 kg, sheet thickness steel (max.): 150 mm, working length: 6,000 mm, protection type (IP code): IP21, cutting speed: 12,000 mm/min, table length: 6,000 mm, table width: 2,000 mm, working width: 2,000 mm, We offer a used plasma and oxy-fuel cutting machine, Varstroj VARCUT 3.2 L2/Ph - 2.5x6.0/1(PL+G). Serial number: 962157 Connection voltage: ~230 V Frequency: 50 Hz Connection power: max. 2.0 kVA Maximum cutting speed: 12000 mm/min Control: CNC Number of torches: 1+1 Cutting thickness (oxy-fuel): 150 mm Working width: 2000 mm Working length: 6000 mm Cutting gas: Propane butane, air Mechanical protection: IP 21 Ledpfx Aoz D Tq Eeb Ashn Total weight: approx. 3500 kg Year of manufacture: 2008 Plasma: TRC-121 OTC Daihen D-12000 30-120A Cutting up to 25 mm thickness with plasma If you have any further questions or require more information, please send us a message or call us.

Condition: excellent (used), operating hours: 562 h, lifting height: 4,050 mm, fuel type: electric, mast type: duplex, battery voltage: 48 V, total height: 2,590 mm, total length: 2,100 mm, total width: 1,150 mm, color: other, Year of construction: 2023 Lifting capacity: 1.800 kg Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit Ljdpjzbz Nbefx Ab Aohn - Blower - Side shift = Remarks = Condition CE type: CE Side shift, Enclosed cabin with heating, Built-in battery charger, 775 Ah battery, LED work lights front and rear

Condition: like new (used), Year of construction: 2021, functionality: fully functional, STC-Ref: G-791-0229 Weileder FSG-42/55 ,Year: 2021 format: 415 x 550 mm equipped: - shrink wrapping machine - Welding frame 415 x 550 mm - machine weight 135 kg - power requirements 230 V / 1 Ph / 50 Hz - working height 960 mm - speed: 300 strokes/hour Lsdpfx As Adz A Asb Ashn - dimensions 1.290 x 820 x 1.340 mm - Product width 415 mm - product height max. 250 mm - product length 550 mm max. --> available: 11/2026

Condition: like new (used), functionality: fully functional, machine/vehicle number: GEADDL-MLAB-G02-900028, Year of construction: 2021, operating hours: 800 h, total length: 1,220 mm, total height: 1,850 mm, total width: 705 mm, type of input current: AC, overall weight: 700 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, laser power: 100 W, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, table width: 90 mm, table length: 90 mm, We offer this showroom Concept Laser Mlab 100R metal 3D printer - Laser Powder Bed Fusion system (LPBF / SLM) Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 100 W singlelaser, 2D optics ScanLab - Build envelope: 90 x 90 x 80 mm - Max. scanning speed: 7 m/s - Focus diameter: 50 μm - Layer thickness: 15 - 50 μm - Connected loads: 1,5 kW; Power supply 1/N/PE AC 230 V, 16 A connector - Inert gas supply: 1 gas connection provided - Ar or N2 (machine was used with argon mostly) - Filtering system: integrated - Dimensions 705 x 1220 x 1848 mm (W x D x H) - Weight: approx. 600 kg - Operating conditions: 15 - 30°C - Holders for different recoater blades types included - A few stainless steel build plates included Includes material parameters for: - Remanium star CoCr alloy, - Parameters for other materials can be inquired from manufacturer. (316L, 17-4 PH, TiAl6V4, CpTi,...) Machine has been used with remanium star only. It is biomedically clean. Age and condition: like new Machine installed at showroom in 2021 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days. Basically, not more than 5% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers service safety patches and updates until this date have been applied. Machine clock: 800 hours - not a "Laser ON time", that is expected significantly lower. Original price: 100.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator with integrated compressor: Parker HPN2-12500C-E - no need for compressed air Lodpjz Tut Uefx Ab Ashn + 3.000 Eur - Table sieving station Retsch AS 200 + 1.000 Eur - Isolation transformer - needed if machine is connected to home-grade (30 mA) breaker. + 1.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: excellent (used), operating hours: 419 h, lifting height: 4,050 mm, fuel type: electric, mast type: duplex, total height: 2,590 mm, total length: 2,100 mm, total width: 1,150 mm, color: other, Equipment: seat heater, Year of construction: 2023 Empty weight: 3.791 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Blower - Side shift = Remarks = Ledpeynwb Hofx Ab Aohn Condition CE type: CE Side shift, Closed cabin with heating, Built-in battery charger, 775 ah battery, LED work lights front and rear

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection Lsdpfx Abjy R A Ape Aehn

Condition: good (used), Year of construction: 1991, Shaker with triangular special stones Lhjdpjn I Rqcjfx Ab Ajn

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, HANDTMANN VF 608 plus | Portioning filler with paddle system Operating hours: 660 hours!!! Manufacturer: Albert Handtmann Maschinenfabrik GmbH & Co. KG Model / Type: VF 608 plus Serial number: 459185 Year of manufacture: 2021 Lodpfx Ajzzq N Aob Aohn Power supply: 400 V / 50 Hz / 3 Ph / 4.3 A / power 3.0 kW Vacuum pump: Busch KC 0016 E 3Z0 (year of manufacture 2020, capacity 19 m³/h) Operating hours: 663.5 h Overall dimensions: 1000 x 900 x 2050 mm The Handtmann VF 608 plus is a professional portioning filler with a paddle system, a compact and versatile device designed for precise portioning, dispensing, and filling of products. It is ideally suited for meat processing plants, butcher shops, delicatessen facilities, and catering companies producing sausages, delicatessen items, or cheese products. The device utilizes Handtmann’s patented paddle system for feeding the product, which ensures exceptionally gentle processing of the raw material without crushing the product’s structure. The integrated, reliable Busch vacuum pump effectively evacuates air from the product, resulting in an excellent appearance of the final product’s cross-section and consistent weight for each portion. Thanks to the use of a modern servo drive and an intuitive control panel, the machine is extremely easy to operate, and changing parameters and product types is efficient with minimal loss of raw material. The robust housing made of stainless steel guarantees long-lasting durability and ease of maintaining stringent hygiene standards.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,633 h, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 16 x 6 - 8, overall weight: 3,710 kg, total height: 2,180 mm, total length: 2,140 mm, total width: 1,150 mm, fuel: electricity, Equipment: cabin, STILL RX 20-18 PH – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.700 mm Closed height: 2.180 mm Free lift: 1.450 mm Mast: Triplex (3F470) Fork length: 1.600 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2016 Lhsdpfjz Aqb Ujx Ab Asn Charger: ohne/without Tyres: Superelastik SE 200/50 - 10 (80%) / 16 x 6 - 8 (80%) Service weight: 3.710 kg Length: 2.140 mm Width: 1.150 mm Year of manufacture: 2016 Operating hours: 14.633 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control Internal no.: 1309262 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. Lhedpfjzizabox Ab Asn - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: repair required (used), functionality: limited functionality, Year of construction: 2015, operating hours: 14,180 h, load capacity: 1,600 kg, lifting height: 3,140 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,140 mm, gearing type: other, battery capacity: 475 Ah, battery voltage: 48 V, fork length: 1,000 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 16x6-8, overall weight: 3,654 kg, total height: 2,140 mm, total length: 2,200 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, LINDE E 16 PH-02 / 386 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.140 mm Closed height: 2.140 mm Free lift: 1.500 mm Mast: Duplex (2F314) Fork length: 1.000 mm Lodjz Aqt Rjpfx Ab Ashn Fork carriage: 2A Drive: Elektro Battery: 48V/475 Ah (2015) Charger: ohne/without Transmission: Impuls Tyres: Superelastik 18x7-8 (40%) / 16x6-8 (10%) Service weight: 3.654 kg Length: 2.200 mm Width: 1.100 mm Year of manufacture: 2015 Operating hours: 14.180 h Condition: in need of repair EQUIPMENT 3rd valve, Rear work lights, Front work lights ATTACHMENTS Sideshift Internal no.: 1308362 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.