Used Spako 225 Litres for sale (3,044)

Condition: excellent (used), Spako Cooking Vessel Capacity 225 litres Thermal Oil Jacketed up to 150 degrees centigrade Scrape mix arm Tap discharge New Process controller fitted Two new elements fitted New insulation fitted Djdpfx Aajy Tnmreysuw

Condition: good (used), Cooking pot with a mixer. Dujdpoy Ullzofx Aayow

Condition: used, capacity 500L. all stainless steel double jacket 36 kW tiltable drum Dsdpfxey Nawhs Aayjuw stirring system with scrapers electric heating dimensions (l x w x h) : ± 1.900 x 1.900 x 1.800 mm

Condition: new, Circular saw blade HSS diameter 225 mm Number of teeth 180 Dodemxi T Uopfx Aayouw pitch 4 mm width 2 mm Bore 32 mm (28419) unused, from magazine liquidation

Condition: excellent (used), functionality: fully functional, Gas boiling kettle Brand Spako Capacity 1100l Voltage 230V 50Hz Duodpfxsv Urudj Aayjw Basket included

Condition: refurbished (used), Spako 225 litre electric heating, thermal oil Jacket vessel With strong agitator, scrape sides Dsdoxwlk Hjpfx Aayouw Tap discharge Piped to hot depositor for set weights and then clipped Complete system being refurbished.

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Dsdpfx Aaot Hw D Doyeuw Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: good (used), Direct from cereal factory, Orbmix 900 twin shaft paddle mixer. Older model but has had really light use mixing cereals and granola. Dedpfxozkutqs Aayouw

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Dsdpjymayvofx Aayouw

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor Dedpfou Ic Rysx Aayeuw 225 Kw Year 2012

Condition: used, Year of construction: 2020, operating hours: 290 h, Width: 1000 mm Duedpfx Aaszk Ahioysw Includes bucket Location: Meckenheim

Condition: good (used), 10 Meter vacuum tank Leba 225 diameter Djdpfx Aaowmrhaeysuw

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Dusdpfozinzrex Aaysw Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Condition: used, Used Vrieco approximately 300 litre capacity stainless steel conical mixer. Mixing cone measures approximately 1,200mm top diameter x 1,500mm high. Has top mounted electric drive / gearbox for stainless steel screw and stainless steel orbit arm. Has bottom outlet with valve. Unit is mounted in stainless steel frame with (4) legs. Dedpfezindmox Aayjuw

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Dimensions: 2,150mm tan to tan x 1,600mm diameter Dusdpszim A Isfx Aaysw

Condition: used, Used Winkworth model PV3000 approximately 3,000 litre stainless steel process vessel. Unit measures approximately 1800mm diameter x 1800mm straight side. External jacketed rated 3.5 bar pressure at 200 deg.c. Unit has a welded flat top and welded conical bottom. Unit has a top entry stainless steel contra-rotating gate agitator with pitched blades driven by (2) geared motors: a 9.2kW geared motor operating at 14.8rpm and a 7.5kW geared motor operating at 27.2rpm. Unit has a bottom entry Silverson BE600 homogeniser with a square hole disintegrating head driven by a 22kW motor. Unit includes a bottom entry discharge pump. Unit is mounted on (3) legs. Dsdpfjzimxpox Aaysuw

Condition: used, Used BCD Engineering Ltd stainless steel vertical reactor body. Approximately 4,000 litre nominal capacity. Unit measures approximately 1,800mm diameter x 1,700mm straight side. Has welded dished top and bottom heads. Internal rated 10 bar / full vacuum design pressure at -29 to 200 deg.c. External stainless steel coil jacket rated approximately 324 litre capacity, 6 bar / FV design pressure at -29 to 200 deg.C. Unit includes top mounted stainless steel anchor type agitator but no drive/gearbox currently fitted. Unit mounted on side support lugs. Dujdpfx Aezimv Ijayow

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Dusdpfx Aezkvucoayjw Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: used, Year of construction: 2021, Max. pressure: 16 bar Djdpfoxz Al Nox Aaysuw Power: 0.81 kW

Condition: new, Machine in stock and immediately available Horizontal bandsaw S 225 G Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Motor power: 1.5 kW Voltage: 400 V Features: - Saw arm can be swiveled up to 60° - With 2 saw band speeds for optimal adaptation to the workpiece - Ideal for cutting pipes, profile materials, and solid materials made of stainless steel, iron, etc. - Generously sized saw arm for vibration-free operation - Lowering of the saw arm via a hydraulic lowering cylinder - Low noise due to robust design - Automatic shutdown after the end of the cut via micro-limit switch - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw band guide for optimal cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation, and German service Scope of delivery - Bi-metal saw band 2480 x 27 x 0.9 mm, 6/10 TPI - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m Dedpfx Aajd R Sklsysuw - Manometer for band tension - Vise with quick-release mechanism - Integrated coolant system - Hydraulic arm lowering - Motor protection switch - Automatic end shut-off - Base frame

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 260 mm, spindle bore: 52 mm, turning diameter over bed slide: 450 mm, turning length: 1,150 mm, rotational speed (max.): 2,300 rpm, overall weight: 1,000 kg, Equipment: rotational speed infinitely variable, Well-maintained and fully functional machine, equipped with a 3-jaw chuck, 200 mm in diameter (Forkhart), a 4-jaw chuck, 320 mm in diameter, a quick-change tool holder (Multi Fix), a cooling system, and a digital display with constant cutting speed. Dodpfx Aaozkb Sgjyeuw

Year of construction: 2009, condition: ready for operation (used), Glass width: 1500mm, glass thickness range: 3mm-70mm, max. workpiece weight: 350kg, max. glass height: 1500mm, machine dimensions X/Y/Z: approx. 5100mm/1350mm/2700mm, weight: approx. 1800kg. Including integrated blasting guns, recovery system RGWS 255 and dust extraction system Dust-EX 1703. Documentation available. An on-site inspection is possible. Dujdpfx Aaszka Ndeyew

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 429 h, load capacity: 2,500 kg, lifting height: 122 mm, fuel type: electric, construction height: 1,419 mm, fork length: 1,150 mm, empty load weight: 798 kg, total length: 2,391 mm, drive type: Elektro, construction width: 770 mm, Low lift pallet truck Load center: 575 mm Technical condition: good Dujdpfozhyk Njx Aayjw Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Inspection and UVV renewed Initial lift, Tandem load rollers, electric steering, electric brake, tiller operable from all sides, mini display, ISM module

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,517 h, load capacity: 2,500 kg, lifting height: 122 mm, fuel type: electric, construction height: 1,419 mm, fork length: 1,600 mm, empty load weight: 820 kg, total length: 2,841 mm, drive type: Elektro, construction width: 770 mm, Low-lift pallet truck Load centre: 575 mm Technical condition: good Battery voltage: 24V Dodpfx Aezhyb Usaysuw Battery capacity: 240Ah Battery manufacturer: Jungheinrich Battery type: Lithium-ion Battery year: 2019 Description: Inspection and UVV safety check new Initial lift, tandem load rollers, electric steering, electric brake, tiller operable from all sides, mini display, ISM module

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,677 h, load capacity: 2,500 kg, lifting height: 122 mm, fuel type: electric, construction height: 1,419 mm, fork length: 1,150 mm, empty load weight: 788 kg, total length: 2,391 mm, drive type: Elektro, construction width: 770 mm, Low-lift pallet truck Load centre: 575 mm Duedpjzhybzjfx Aayjw Technical condition: good Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2020 Battery condition: 60 - 80% Description: Inspection and UVV recently performed Initial lift, tandem load rollers, electric steering, electric brake, tiller operable from all sides, mini display, ISM module