Used Serrmac Next 25 for sale (16,225)

Condition: new, SERRMAC NEXT 25 PGM DRILL PRESS - DOUBLE SPEED THREE PHASE - NEW "CE" - ROTARY TABLE + VICE Drilling on steel: Ø 25 mm Tapping: M16 Column attachment: CM3 Column diameter: 98 mm Spindle stroke: 100 mm Transmission: pulleys (PU) No. of speeds: 12 No. of revolutions: 164 - 2460 rpm Motor power: 0.75 kW Knedpfsuif Syjx Albjc Power supply: 380 V - 3 phases Weight: 185 kg

Condition: excellent (used), Number of spindles 4 Drilling capacity -25 mm Throat 205 mm Quill stroke 120 mm Spindle speeds 150-2'000 rpm Table size 1400 x 275 mm With tapping device MARCELS MASCHINEN CH Kodpfx Alsy Iz Sdjbsnc

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm Knedpfxjp Du Ale Albsc

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. Kjdpfxeznz Ezo Albenc The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, Year of construction: 1990, Electromagnetic feed in 3 speeds Tool holder: MK 3 2 engine speeds Hub Pinole 135 mm Overhang 300 mm Ø Steel 32 mm Max. Table length 600 mm Kjdps Aa Aa Ijfx Albsnc Table width 345 mm 500 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 2.25 kW (3.06 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: AC, tool diameter: 40 mm, spindle mount: MK 4, drilling depth: 130 mm, actuation type: manual, rotational speed (max.): 2,380 rpm, rotational speed (min.): 65 rpm, total width: 685 mm, total length: 1,030 mm, total height: 1,900 mm, throat depth: 300 mm, table width: 600 mm, table length: 460 mm, overall weight: 410 kg, Equipment: documentation/manual, rotational speed infinitely variable, Column drilling machine SerrMac TCO 40L - Year of manufacture: 1999 - Good condition considering its age - Work table: 600 (width) x 460 (depth) mm - Motor: 2.25 kW - Spindle speed: 65 – 2,380 rpm – 2 speeds via gearbox, infinitely variable within each speed - Mechanical drill drive with feed rate adjustment possible - Thread cutting device - LED table lighting (retrofitted) Kedpjz Ailrjfx Albenc - Sturdy machine with a robust column - Weight: 410 kg - Fully functional - Tool holder, clamping devices, and a vise can be purchased separately, depending on the pricing - Machine can be inspected while powered on This offer is non-binding. Subject to prior sale. No online sales. Sale is only to commercial customers after inspection and acceptance on-site. Due to the age of the machine, the sale is made without any warranty. Pickup only (EXW) - no shipping.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 145 mm, spindle speed (max.): 2,340 rpm, spindle speed (min.): 32 rpm, spindle mount: MK 0, throat depth: 293 mm, quill diameter: 72 mm, quill stroke: 145 mm, total length: 1,340 mm, total height: 2,050 mm, table width: 225 mm, total width: 1,280 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: ISO40, spindle diameter: 72 mm, nominal power: 3 kW (4.08 HP), Milling-/Drilling Machine, DRO, drilling capacity Ø 40 mm, motor 2,2/3,0 KW, table size 800x225 mm, spindle speed 32-3240 rpm stepless, ISO40, pneum. tollclamping el. tapping device, table stroke X/Y 585/240 mm, automatic spindle feed, coolant device, dimensions 1340x1280x2050 mm, weight ca. 780 kg Knjdpsz Rqfzofx Albjc

Condition: excellent (used), Year of construction: 2020,

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm Knodpfx Aozrprqjlbec ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 34230/20,513, fuel type: electric, fuel: electricity, loading space width: 250 mm, loading space height: 150 mm, The device was purchased by our company in 2021 and has never been used. Its operational condition has not been tested. Blade width: 250mm, lifting height: 150mm. Knsdpfx Ale Aavhrobjc Vibratory feeder length: 3.5m, conveyor belt length: 2.5m.

Year of construction: 2000, condition: used, Year of manufacture: Dec 2000 New: No Serial number: 385/65 R 22.5 Kedpfjx Ahkajx Albenc NETTE TRAILER TIRES.

Condition: used, functionality: fully functional, turning diameter over bed slide: 2,500 mm, total length: 3,750 mm, total width: 850 mm, total height: 1,350 mm, spindle speed (max.): 1,000 rpm, Global Nordic 25 lathe. Equipped with a three-jaw chuck, a four-jaw chuck, an eccentric four-jaw chuck, and various drills. Ksdpfxs Aa Iyge Albenc 18 speeds. Hollow spindle, 78 mm. Speed n=rpm 12.5. 400V.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Column drilling machine Serrmac R45 E/TR, year of manufacture 2021, drilling up to 45 mm diameter and threading up to M26 mm, continuous drilling capacity in R 50 ø 45 mm, thread cutting capacity in R 50 M 26, spindle taper MK 4, spindle stroke 145 mm, quill diameter 72 mm, table surface TR - base plate 600 x 460 mm, column diameter 164 mm, total height 1,986 mm, total width 675 mm, total depth 1,100 mm, weight 610 kg, spindle speeds equipped with inverter, motor power 3 kW, coolant and chip tray. Ksdsyh Dhwepfx Albsnc

Condition: new, Precision, quiet, and reliable drill press. Built according to strict safety standards. Precision spindle with hardened Morse taper and machined base plate. Electronic speed control included. Rotating table + vise, 350 x 250 mm. Drilling capacity in steel: R50 mm, ø 22. Tapping capacity in steel: R50 mm, M14. Spindle taper: CM2. Spindle stroke: 90 mm. Spindle bore diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. Ksdsir Aihepfx Albonc PU transmission. Electronic speed control (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V, single-phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, total length: 1,300 mm, total height: 2,000 mm, table width: 255 mm, input voltage: 400 V, total width: 1,350 mm, table length: 800 mm, drilling capacity: 40 mm, Equipment: documentation/manual, SERRMAC TCS 40 TC VR DA Drilling and Milling Machine Square column and prismatic guides. Complete with: Automatic feed. Variable speed with delay. Lubrication system. Motorized rapid vertical feed for cross slide table. Vise. Drilling capacity in steel: 40 mm diameter. CM 4 spindle connection. Spindle stroke: 145 mm. Cross slide table: 800 x 255 mm. Variable speed with delay: 64-2350 rpm. Knsdpjzkkm Hsfx Albsc Motor power: 2.2 kW. Power supply: Three-phase, 400 V. Weight: 780 kg.

Condition: good (used), Year of construction: 1992, functionality: fully functional, operating hours: 8,600 h, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, pressing force: 80 t, overall weight: 5,200 kg, Amada Promecam Press Brake 80-25 CNC Press Brake, 80 tons, 2500mm bending length. In perfect working order, easy to operate. Kedpfoz Rqxhsx Albonc Robust machine. Only 8600 operating hours. Can be inspected and tested before purchase. German operating manual included.

Condition: used, functionality: fully functional, Used TAPER TAP MACHINE, FAMUP (SERRMAC) MDR16. TAPER TAP MACHINE, SERRMAC WITH PEDESTAL COOLING SYSTEM AND TANK, USED. Knsdpfx Aozht Izslbsc

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, SEPRO S5-25 med – Linear robot with complete automation peripherals | Year of manufacture 2024 For sale is a SEPRO S5-25 med linear robot from the year 2024, including extensive automation peripherals for plastic injection molding production. The system is in very good, well-maintained condition and is fully functional. The linear robot was used in combination with a KraussMaffei KM 200-700 C2 injection molding machine and serves for the automated removal, handling, and further processing of plastic molded parts. Technical data: - Manufacturer: SEPRO Robotique - Model: S5-25 med - Year of manufacture: 2024 - Type: Linear robot / Demolding robot - Electrical power: max. 1.5 kVA - Operating voltage: 3 × 400–480 V (±10 %) - Frequency: 50/60 Hz - Short-circuit strength: 10 kA - CE marking: present - Condition: very good, used - Functionality: fully functional Automation equipment according to plant documentation: - SEPRO S5-25 linear robot - Mounting console and support structure - Conveyor system for part transport - Protective enclosure with safety devices - Fall-through chute - QA drawer for quality control - Safety interlocks and emergency stop devices Kodpfx Alsz Sn Amsbenc Possible applications: This automation solution is particularly suitable for plastic injection molding, automated parts removal, and, with appropriate adjustments, for other industrial handling and transport tasks. Due to its recent year of manufacture (2024) and extensive peripherals, the system offers an interesting opportunity to expand or modernize existing production capacities. Inspection is possible by prior arrangement. We will gladly provide further technical information, images, and details on the scope of supply upon request. Note: The KraussMaffei injection molding machine mentioned on the CE type plate is not part of this offer. The SEPRO automation, including the agreed-upon peripherals, is being offered. However, the injection molding machine can be found in a separate offer and can also be purchased optionally upon request.

Condition: excellent (used), Year of construction: 2010, Assembly line for cabinet bodies, consisting of: The Ligmatech press can be sold separately and was manufactured in 2010; the rest of the system was manufactured in 1996. Pos. 1: Assembly table with conveyor belt 2500*800mm and small parts shelf Knodpfxjzi N Rus Albjc Pos. 2: Roller conveyor approx. 6000*800 Pos. 3: Glue application station for cabinet body sides with 1 glue gun Pos. 4: Roller conveyor approx. 4000x800mm Pos. 5: Cabinet body lowering station approx. 3000*800; adjustable from working height of 850mm to 300mm Pos. 6: Ligmatech cabinet body press MPH 510/25/09/S Profiline, manufactured in 2010 with automatic infeed and outfeed of cabinet bodies (belt conveyor), safety light curtain at the front Machine data: for cabinet bodies with Length: 250-2500 mm Width: 250-1000 mm Height: 150 -1400 mm Pressing force: 14 KN Positioning speed: 25 mm/s Working height: 300 mm Space requirement: 4000 x 750 x 2300 mm Weight: 2200 kg Pos. 7: Cabinet body uprighting station approx. 3000*800mm Pos. 8: Belt conveyor 4000*800 Pos. 9: Cabinet body discharge station 1200*800mm Pos. 10: Cabinet body assembly station, height-adjustable, with belt conveyor 4000*800

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Year 2016 10 M Long x 2.5 M Diameter 50mm Round Holes, 8mm Thick Knjdpfx Alozzrwbobjc All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Condition: used, Year of construction: 1991,

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total width: 2,500 mm, total height: 3,500 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, feed length Y-axis: 3,500 mm, overall weight: 3,550 kg, type of input current: three-phase, power: 17.06 kW (23.20 HP), Equipment: documentation/manual, Used Lisec VL-1N/25 insulating glass manufacturing machine for sale, year of manufacture: 2009. Type: VL-1N/25 Serial number: 361-053012 Ksdpfx Aoz Nkh Tolbonc Weight: 3,550 kg Total load current: 24.60 A Apparent power: 17.06 kVA Voltage: 3/N/PE-50Hz 400 V Pressure: 6.00 bar Maximum material load: 250 kg/m Auxiliary current: 8.0 A AC/DC voltage: 400 / 24 V LISEC VL-1N/25 automatic thermal insulating glass sealing robot – 2500 x 3500 mm. Automatic edge sealing machine designed for applying secondary sealant to thermal insulating glass units. The machine consists of an infeed and an outfeed section, as well as a discharge station. A separate measuring unit located in front of the machine measures the thickness of the glass panes, the air gap between them, and the total thickness of the thermal insulating glass unit. The top edge of the thermal insulating glass unit is guided by a horizontal roller beam. This allows the glass units to pass at a defined distance in front of the back panel in the sealing sections. They are transported using a patented, wear-resistant conveyor chain, which supports the lower edge of the unit only minimally, leaving the sealing groove free for the application of the sealant. A linear-guided vacuum suction system integrated into the back panel ensures that the thermal insulating glass units are transported without slipping. The machine can also process polyurethane in 200-liter containers of component "A" + 20-liter containers of component "B", as well as silicone in 200-liter containers of component "A" + 20-liter containers of component "B". The machine can be viewed in operation and will be dismantled in mid-January. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 1987, machine/vehicle number: 12871, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, pressing force: 112 t, oil tank capacity: 120 l, total length: 3,300 mm, total width: 2,150 mm, total height: 2,500 mm, overall weight: 10,000 kg, controller manufacturer: DELEM, controller model: EA 22, working length: 3,100 mm, DARLEY EHP 110 31/25 press brake Knodjz I N D Nepfx Albsc - including foot switch and the bending tool located on the machine FCA D-35614 Aßlar - loaded onto a truck

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 4 Axes: X, Z, C, B Type: TL 25 BTM Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Knedpfjz Ih A Djx Albec Documentation: Included ✅ Chip Conveyor: Included ✅

Year of construction: 1981, condition: used, Offered is an NC milling machine with tool magazine. Travel X/Y/Z: 750mm/400mm/500mm. Max. spindle speed: 2700rpm. Control: Siemens Sinumerik 820M. Equipped with a tool magazine for 12 tools. Inspection possible by appointment. Knodpfx Alo Aba S Dsbjc