Used Scm Integra System for sale (37,988)

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Iaedpeixxwmefx Aqueu Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm Isdpfjzcmcvox Aqueau 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm Ijdjd Supgspfx Aqujau machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: ready for operation (used), Year of construction: 2021, This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine. Additional equipment • Vacuum Motor: Powered by inverter up to 7.5 kW integrated into machine frame / Conveyor: Rubber-coated belt conveyor 50 Shore / Feed Belt Motor: 4 kW driven by inverter / Console: Integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 Working Programs / Control System: Interactive troubleshooting, self-diagnosis, Full HD display with multi-touchscreen, Maestro Pro Sand software • Operating Temperature: +5 to 35°C/ Additional Features: Virtual keyboard, production report, display of electric and pneumatic diagrams, user manual. Machine Benefits Technical Machine Benefits Iedpoyaqg Tjfx Aqujau • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: pro sand electronic control / display: plc terminal with 10. 4" lcd color display • Sanding belt dimensions: 150 x 5000 mm / chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Aggregate 1: tie 5000 working unit for extra table internal cross pad / automatic brake, linear blower, sanding belt cleaning system / aggregate 2: do19 orbiting unit for 19 rotating disc brushes / main motor: 1. 1 kw / rotating disc diameter: 125 mm / aggregate 3 & 4: bf300 working unit for brush roller / brush roller diameter: 300 mm / motor: 4 kw / aggregate 5: sc 2620 operating unit for super-finishing pad / chevron belt dimensions: 1370 x 2186 mm / sanding belt dimensions: 1370 x 2620 mm

Condition: excellent (used), Here, we offer an ETSYSTEM electronic load with GPIB interface. 32615A AC & DC Electronic Load GPIB/RS232, 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, offering an ideal test solution for UPS, AVR, and DC/AC inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series features its own control and display panel and a 5-status recall/memory storage, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measurement device test function provides a quick diagnosis of test results for production and QC test throughput. Features: Voltage, current, power, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory storage. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit display for voltage, current, power, and VA. Suitable for sine, square, and step waves. Width 600 mm, Height 1506 mm, Depth 600 mm Iaedpfx Ajzd Uh Isqueu 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Isdey Dta Sspfx Aquoau

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Iedex Twdyopfx Aquoau

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Ijdjx Twcvopfx Aquoau

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · X-Y travel: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm C-axis deactivated – 3-axis machine The base structure is a monolithic construction made of thick-walled steel. It is reinforced throughout the entire machine bed with welded-in triangular plates, which makes it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the key to lasting precision and stability. The machine layout allows the operator an optimal workflow despite minimal space requirements. The resulting base frame thus provides the machining unit with a balanced and secure foundation, ensuring excellent load distribution. The mobile unit carrier is built as a solid monoblock. It is positioned in X-direction on ground prismatic guides with recirculating ball carriages. The working unit is again mounted on ground prismatic guides and a recirculating ball carriage on this mobile unit carrier. Description of aggregates and accessories (basic equipment) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill interface: M 10 with 11 mm fitting Grooving saw unit in X: · Integrated in drill head · Grooving saw blade with max. diameter 120 mm Main milling unit (Position 2): · Tool holder HSK 63F · Speed: 1,500 - 24,000 rpm stepless via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power 6.6 kW (9 HP) from 12,000 rpm (S6) · Clockwise/counterclockwise rotation · Ceramic bearings · Includes: 4 pcs. tool holders (right) without collet Tool changer R8L: Automatic tool changer for 8 tools. Mounted on the rear unit carrier for quick tool access. · Number of tool stations: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight all tools: 22 kg · Holder for 1 angle gear · Moves in X direction Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm stepless via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (for saw D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm Iaodpjx Twccefx Aquju · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Work table: The work table is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system provides maximum flexibility for precise positioning and optimal holding of workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X direction · 12 round vacuum cups D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · Retractable reference stops are CNC controlled · Pendulum machining standard (2 work zones) --- other clamping systems available as options --- Axis movement: The drive system in X, Y and Z is via ground recirculating ball screws...

Condition: used, Year of construction: 1990, Working width: 630 mm Planing height: 250 mm Planer shaft: Tersa Number of knives: 4 Height adjustment: electric Ijdpfxoyxgans Aqusau Planing thickness display: mechanical counter Feed speed: stepless, approx. 6–18 m/min Infeed roller: steel Outfeed rollers: 2 x steel Table rollers: yes, powered Motor power: 5.5 kW Extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1100 kg

Condition: used, Year of construction: 1993, Working width: 410 mm Jointer cutterhead: Tersa Number of knives: 3 Jointer bed length: 2000 mm Concave/convex fence adjustment: no Adjustable angle of the jointer fence: yes Raising the jointer bed: manual Maximum feed thickness, thickness planer: 240 mm Height adjustment of the thickness table: electric Indication of planing thickness: mechanical counter display Feed rate: 6/12 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: continuous Table rollers: no Motor power: 5 kW Motor brake: yes, automatic Dust extraction port: 160 mm Iajdpezdzakofx Aqueu Machine length: 2300 mm Machine width: 1100 mm Weight: 450

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015406, functionality: fully functional, operating hours: 14,808 h, working width: 1,300 mm, spindle speed (max.): 24,000 rpm, working height: 200 mm, working length: 3,110 mm, No minimum price – guaranteed sale to the highest bidder! The machine is still in operation and can be inspected while powered on. TECHNICAL DETAILS Working area X-axis: 3,110 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Maximum travel X-axis: 3,500 mm Maximum travel Y-axis: 1,815 mm Maximum travel Z-axis: 440 mm Table length: 3,050 mm Table width: 13 mm Number of milling spindles: 1 Spindle speed: 600 - 24,000 rpm Number of controlled axes: 5 Horizontal drilling spindles: 6 Vertical drilling spindles: 12 Tool changer positions: 16 MACHINE DETAILS Main motor power: 11 kW Main motor power of the vacuum pump: 5.5 kW Capacity of the vacuum pump: 250 m³/h Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,450 x 2,850 mm Installed dimensions (L x W x H): 4,600 x 6,500 x 3,400 mm Shipping dimensions: 9,000 x 2,450 x 2,850 mm Empty weight: 4,000 kg Shipping packages: 1 unit Operating hours: 14,808 h EQUIPMENT Isdpozdy E Sjfx Aqueau Milling table: Beam table Tool clamping system: HSK-F63 Material clamping system: Pneumatic Drilling tool Saw unit System/Software: Xilog plus Safety feature: Safety mat Vacuum pump: Becker CNC options: Chip conveyor, Hand control CNC documentation: User key/licenses

Condition: good (used), functionality: fully functional, SCM SI12B circular saw Cutting width from the right side: 620 mm Maximum cutting height: 90 mm with a 300 mm saw blade Iaedpfxezdriij Aquju Manual adjustment of the saw blade tilt angle up to 45° Manual raising and lowering of the saw blade Main motor power: 2.2 kW

Condition: good (used), functionality: fully functional, SCM Sandya 30 RT wide belt sander Working width: 1100mm Working height: 3-160mm Number of sanding heads: 2 Steel calibration roller Sanding head with a segmented platen divided into 20 sections Motor power: 1.15 kW 2.11 kW Optical oscillation Dust extraction system on the second sanding head Ijdpfxjzdglto Aqujau Spare segmented platen Belt dimensions: 2620x1115mm Feed speed adjustable by means of a variator Machine dimensions: 180x300x230cm (H) Machine weight: 2700kg

Condition: excellent (used), CATALOGUE NUMBER 8021 Iasdpszdfnyofx Aquju TECHNICAL DATA - max. width of the workpiece: 1100 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating 2) grooved rubber roller - motor power: 11 kW - brake - from above: - split, sliding metal roller - pressure roller - unit - pressure roller - unit - pressure roller - cleaning brush - from below: - 2 sliding metal rollers - conveyor belt - 2 sliding metal rollers (outlet) - new conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - feed motor: 1.5 kW - grinding thickness potentiometer - working pressure: 8-10 bar - dust extraction nozzle diameter: 3x165 mm, 1x140 mm - overall dimensions (L/W/H): 1870x1850x2210 mm - weight: 2165 kg ADVANTAGES - Made in Italy, SCM brand - New conveyor belt - 2 units - Grinding thickness potentiometer - Unpainted - Used sanding machine, very good condition Net price: 26900 PLN Net price: 6405 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2018, 3650 x 1560mm Matrix Table 4455mm x axis stroke [for routing] 1930mm y axis stroke [for routing] 250mm z axis stroke 150mm Max panel clearance X / Y Axes vectorial speeds 43m/min Z axis speed 15m/min Power 2000 Routing Unit 9 / 10hp for HSK63F toolholders. Speeds from 12000 to 18000rpm 250m3 / hr vacuum pump Telesolve long distance remote diagnostic system Fitted with following options Interpolating Z axis Centralised dust extraction system Pre-setting for angle driven heads TR10 Fixed 10 position toolchanger [ mounted on side of table ] R8 Rapid 8 position rotary toolchanger [ mounted on operating unit support beam ] 2 x Electronic detecting systems for panel height and tool length 3 x Additional rear stops Automatic centralised lubrication "PC Office" Console for easy movement around machine. Including Windows XP operating system 15" Colour monitor Keyboard CD Rom drive 40 Gbyte hard disk 128MB Ram Iodpezd Utwofx Aquoau Serial nr - AA2 / 000268? Year - 2008 CE Compliant Condition - Good

Condition: used, SCM 320cm SiX panel saw 320cm carriage, aggregate tilting in two directions +45 to -45 degrees, blade tilt and up/down adjustment with electric motor, rip fence on the right side with electric adjustment up to 1500mm, Iaodozd Uf Topfx Aquju 2-axis scoring saw with electric adjustment, 7.5KW motor, speeds controlled by a frequency inverter, max. blade diameter 550mm, carriage with angle adjustment used machine, good condition The machine has a new, non-original control system. All adjustments are functional.

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Iajdpozc Ilxofx Aqusu

Condition: used, functionality: fully functional, SCM Sandya 900R Wide Belt Sander Specifications: • Condition – used, after a comprehensive overhaul • Manufacturer – SCM • Model – Sandya 900 R • Working width – 900 mm • Max. working height – 150 mm • 1 sanding unit – hard rubber roller with a diameter of 300 mm and a hardness of 90° Shore A (ShA) • Main motor power – 11 kW • 2 conveyor speeds • Floating table on pneumatic cylinders – ideal for calibration • Analog gauge for measuring the thickness of the sanded part • Oscillation on a pneumatic anvil • Extension tables with rollers • Abrasive belt size – 900x2100 mm • Dust extraction port – 150 mm • Weight approx. 1200 kg • Overall dimensions 176 x 150 x 205 cm (L x W x H) Additional information: • The machine is ready for immediate use • The photos show the actual condition of the item for sale • Possibility to turn on and test the machine on site Iajdpfx Aezd Tfxequeu • Free training on machine operation (at the company's headquarters) • The price stated in the auction does not include VAT and transportation costs Financing and transport: • We organize transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or lease financing

Condition: used, functionality: fully functional, SCM F410 Planer/Thicknesser Specifications: • Condition – used, inspected • Manufacturer – SCM • Model – F410 • Working width – 410 mm • Bed length – 2610 mm • Adjustable infeed table angle • Motor power – 3.0 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Max. removal depth – 8 mm • Noise-reducing combs near the shaft • 4-knife shaft with a diameter of 120 mm for traditional knives • 0-1 start • Weight – approx. 650 kg • Overall dimensions: 261 x 85 x 105 cm (L x W x H) Additional information: • The machine is in good technical condition and ready for immediate use • The photos show the actual condition of the item • Possibility to turn on and test the machine on-site • Free training on machine operation (at our company premises) • The price listed in the auction does not include VAT and transport costs Financing and transport: • We organize transport using MDD’s fleet, courier companies, or external carriers Ijdszd Stbspfx Aqujau • We offer financial support in the form of leasing or leasing financing

Condition: used, Year of construction: 2003, equipped with Tersa cutterblock and electric height adjustment, tables measured with top precision Iodpfx Aozd Hdnjqusau max. 1/10 mm completely set up used top condition cleaned functionally tested partially refurbished Manufacturer: SCM Type: FS 410 Year of manufacture: 2003 Machine no.: 159435 CE type-tested GS dust-tested Number of cutters: 3 Feed rate m/min: 6 + 12 Bridge guard Slotted table lips Low-noise table lips Motorized automatic brake Tersa cutter system Rubber draw roller Digital display for planing height Electric height adjustment with fine adjustment Extraction hood integrated Motor kW: 5.5 Planing width approx. mm: 410 Planing height approx. mm: 240 Table length approx. mm: 2100 New price approx. €: 7500.00 Extraction connection mm: 100 Space requirement approx. L x W x H mm: 2100x900x1300 Weight approx. kg: 710 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, Technical specifications: Spindle diameter: 30 mm Spindle height: 170 mm Speeds: 3000/4500/6000/7000/10000 rpm Manual spindle height adjustment Spindle lock Work table dimensions: 720x2620 mm Adjustable support arms Motor power: 5 kW Iajdezd Eu Sopfx Aqueu Power supply: 400 V Overall dimensions: Length: 1050 mm Width: 2620 mm Height: 1850 mm

Condition: used, Technical specifications: Spindle diameter: 30 mm Spindle height: 130 mm Rotations: 3000/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Work table dimensions: 1800x650 mm Adjustable cullet arms Motor power: 4 kW Power supply: 400 V Overall dimensions: Length: 650 mm Iaodozd Eufjpfx Aquou Width: 1080 mm Height: 1300 mm

Condition: used, Technical specifications: Track width: 220 mm Maximum cutting height: 120 mm Maximum saw blade diameter: 350 mm Smooth feed rate adjustment Automatic lubrication system Anti-recoil protection Culaga Dust extraction port: 180 mm Safety switch Power supply: 380 V Ijdpfx Aqszd En Eeujau Main motor power: 18.5 kW Overall dimensions: Length: 1700 mm Width: 1600 mm Height: 1250 mm

Condition: used, Technical specifications: Working width: 900 mm 1 Calibrating unit Shaft diameter: 140 mm 2 Calibrating unit Shaft diameter: 140 mm Height of workpiece: 160 mm Diameter of extraction nozzle: 2x160 mm Electric lifting mechanism Analog display Safety switch Main motor power: 9.5 Kw Voltage: 380 V Overall dimensions: Length: 1500 mm Width: 1600 mm Iaedpfxezd Dcno Aquju Height: 1800 mm