Used Schleicher Rms 8/53/96-320 for sale (41,000)

Year of construction: 1990, condition: good (used), 8 rolls, Ø 53 mm strip width: 50 - 320 mm Ijdpfx Ahegq D Aroyobc strip thickness: 0,4 - 3 mm

Condition: used, Year of construction: 1987, material width 800 mm material thickness 0,4 - 2,5 mm no. of straightening rolls 8 straightening roll diameter 53 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm material thickness at 800 mm material width (Niro) 0,6 mm material thickness at 800 mm material width (steel 1,0 mm material thickness at 150 mm material width (Niro) 2,5 mm material cross-cut 975 mm² speed - 35 m/min power requirement 2,1 kW weight 7,0 t dimensions (WxDxH) 2,0 x 2,0 x 2,3 m Ijdpfx Ahozrpufoyobc Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet

Condition: used, Year of construction: 1971, Coiler/straightener unit manufactured by SCHLEICHER, type RM-S 300 / H 2. Press force approximately --- tons. Year of manufacture 1971. Structured summary – a full technical translation will follow if required for this lot. Iedpozyncwsfx Ahysbc

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW Iodszrpr Depfx Ahyjbc weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Year of construction: 2001, functionality: unexamined, grinding length: 800 mm, grinding width: 600 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, grinding spindle motor power: 20,000 W, Used surface grinding machine and profile grinding machine, year of manufacture 2001, partially overhauled in 2019, ELB-SCHLIFF model PERFEKT-FUTURE BD 8 -F- Schleicher-Unicon CNC Electro-magnetic clamping plate 500 x 300 x 4 mm, new pole pitch in 2019 Ijdpoywk Akofx Ahysbc Coolant system featuring combination of permanent magnet and paper band filter Adjustable coolant supply nozzle Grinding wheel flange

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment: Ibjdpfefiqdcsx Ahyec Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front supports for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with globally applicable standards Electrical equipment, in accordance with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional front sheet metal support system, sliding Special sea packaging 8-meter press brake, 320 tons. Bilk9emkq3 With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice that is tailored to your company's goals. Our mission is to be your direct contact on site and to offer you services related to training and customer support. We are happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always there when you need us to react quickly and efficiently. Here, we are your reliable partner for technologically high-quality solutions in sheet metal processing.

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min Ibsdpfxozrpu Eo Ahyec power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: used, Year of construction: 1992, operating hours: 1,234,567 h, machine/vehicle number: 20.2628, clamping force: 2,500 kN, operating pressure: 200 bar, heating capacity: 7 kW (9.52 HP), Used DESMA 968-250 rubber injection molding machine. The control system was replaced in 2016. Heating plate size: L 650 x W 380 mm. 6 additional heating circuits are available. The dispensing volume with intrusion has been increased to 2350 g. Minor oil leakage in the hydraulics. Overall condition is good, and the machine is operational. Cylinder temperature control units are not included. Iedpez Rmiiefx Ahysbc Other visible items in front of and behind the machine are not part of the auction. Removal must be arranged by the buyer.

Condition: used, Year of construction: 1999, operating hours: 105,000 h, functionality: fully functional, overall weight: 741 kg, total length: 1,940 mm, total width: 870 mm, total height: 1,300 mm, volume flow: 425 m³/h, operating pressure: 1 bar, final pressure: 1 bar, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 970 rpm, protection type (IP code): IP55, KSB KWP K 200-320 Pump Set, 18.5 kW – Complete Set, Documented 8 × KSB Centrifugal Pump KWP K 200-320 – Complete Industrial Unit, incl. Drive For sale are 8 identical, well-maintained industrial pump units from the renowned KSB KWP K 200-320 series. The units originate from a special order (KSB Pegnitz, order from 1999/2000) and were accepted and tested according to DIN 1944/III with customer acceptance. Sale of used KSB pump units (year of manufacture 1999, relatively low operating time of approx. 105,000 hours per unit) in as-is condition, without warranty or guarantee. Units have been dismantled; functional tests are possible upon request (without assurance of characteristics). Reference operation with identical units available. Sale preferably in packages; further units potentially available in the future (11 additional units). Spare parts and service obligations are excluded! Pump – KSB KWP K 200-320 Manufacturer KSB Aktiengesellschaft, Pegnitz Type / Series KWP K 200-320 (Impeller pump, radially split volute casing pump) Works No. 5-N01-541905 (Serial numbers on request) Flow rate Q 425 m³/h (118 l/s) Head H 10.25 m Min. Flow Rate 89.9 m³/h Speed 970 rpm (constant) Pump power 14.7 kW Motor power 18.5 kW Efficiency 80.8% NPSH 2.20 m Operating pressure max. 10 bar Suction nozzle DN 200, axial Discharge nozzle DN 200, upwards Flange DIN 2532 PN 10 Impeller diameter 320 mm (Re-machining form A15, 3-blade) Bearing carrier P05AX Shaft seal Tandem-GLRD (non-pressurized quench), Type 4K M3 Materials Pump casing / Pressure cover / Impeller 9.4460 (stainless, abrasion-resistant) Shaft sleeve 1.4539 GLRD cover 1.4571 Shaft C 45 N Base plate GG (gray cast iron) Drive & Peripherals per Unit Electric motor VEM, IP55, IEC size 200L, 18.5 kW, 970 rpm, B3, 50 Hz, 400/690 V, Insulation F, 3 PT100 sensors Coupling Flender Eupex N-H / Size 140, Intermediate sleeve 180 mm Base plate ZN 24259-G-ISO, Size 9G, GG, 4×M24×320 stud bolts Quench tank incl. piping 1.4571, without fittings Coupling guard Steel Weights per Unit Pump 350 kg Iodjzp U Tuopfx Ahyobc Motor 175 kg Base plate 200 kg Coupling + guard 16 kg Total 741 kg Available Documentation (per unit) • Acceptance / Test report of the initial commissioning EN 10204 / DIN 1944 Class III (5 measuring points) • Q-H curves (Curve No. K 95231) • Installation plan / Dimension table with nozzle connections • Installation drawing of the mechanical seal (Drawing No. 0W244223) • Piping plan quench tank • Operating and maintenance instructions Application area / Application notes The KWP K series is a proven process centrifugal pump for: • Wastewater treatment and sewage treatment plant process technology • Biogas plants and fermentation substrate conveying • Sugar factories, paper mills, food production • Biotechnological processes (algae suspensions, fermentation) • Cooling water circuits and process water conveying in the chemical industry Further important (sales) information can be found in the attached documents.

Condition: used, Year of construction: 1991, operating hours: 1,234,567 h, machine/vehicle number: 20.2588, clamping force: 2,500 kN, operating pressure: 200 bar, heating capacity: 7 kW (9.52 HP), Used DESMA 968-250 rubber injection molding machine. The control system was replaced in 2016. Heating plate size: L 650 x W 380 mm. 6 additional heating circuits are available. The dispensing volume with intrusion has been increased to 2350 g. Minor oil leakage in the hydraulics. Overall condition is good, and the machine is operational. Cylinder temperature control units are not included. Other visible items in front of and behind the machine are not part of the auction. Removal must be arranged by the buyer. Ibjdpfx Ahoz Rmpveyjc

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, Ibedpfxez Nkutj Ahyjc excluding transport, EXW (Ex Works), subject to prior sale.

Condition: good (used), Year of construction: 1999, operating hours: 139,541 h, machine/vehicle number: 175489, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 97 cm³, injection weight: 97 g, ejector force: 30,000 N, overall weight: 2,250 kg, type of input current: DC, For sale is a reliable ARBURG Allrounder 320 S 500 - 150 (SELECTA Series) from 1999. The machine comes from a well-maintained industrial facility and is renowned for its durability and precision in plastics processing. Technical Data: Model: Allrounder 320 S 500 - 150 (Selecta) Machine No. / Serial No.: 175489 Year of manufacture: 1999 Operating hours (auto): 139,541 h Total connected load: 35.5 kW Total rated current: 66 A Electrical specifications Operating voltage: 400 V (3~ / 50 Hz) Ibedpfx Ahsy Dfqceyjc Control voltage: 230 V (~ / 50 Hz) DC control voltage: 24 V (DC) Rated current (motor/heating): 54.0 A / 12.0 A Machine dimensions & weight Length: approx. 3.40 m to 3.80 m (depending on injection unit version) Width: approx. 1.43 m Height: approx. 2.00 m Total weight: approx. 2,250 kg Tie bar spacing (h x v): 320 mm x 320 mm Platen size (h x v): approx. 445 mm x 445 mm (up to 498 mm depending on configuration) Minimum mold installation height: 225 mm Opening stroke: 350 mm Max. daylight between platens: 575 mm Transport and loading can be organized Europe-wide, subject to an additional charge. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet cost-effective metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2011, operating hours: 22,001 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 2,050 mm, Travel distances: X-axis: 1800 mm Y-axis: 800 mm Z-axis: 600 mm Table size: 2050 x 750 mm Ibedpfxezl Uxpe Ahyjc Spindle speed: 0-8000 RPM Spindle hours: 6626 hrs Tool holder: SK40 Tool magazine: 30 positions Installation dimensions: approx. Width: 6500 mm Depth: 4400 mm Height: 4000 mm Weight: 12000 kg Machine hours: 22001 hrs Accessories: - Documentation

Condition: excellent (used), Year of construction: 2009, Clamping force: 320 t Clamping force: 3200 kN Opening force: 130 kN Opening force (boosted): 100 / 800 kN Opening stroke: 700 mm Mould height: 300–700 mm Ibjdjyya Inepfx Ahyjc Distance between platens: 1000–1400 mm Platen size: 1040 × 1040 mm Max mould weight (per half): 3600 kg Ejector force: 100 kN Ejector stroke: 250 mm Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 392 cm3 Pump drive power: 45 / 55 / 55 kW Dry cycle time: 3.5–504 s Total installed power: 70.5 / 89 / 96 kW Working hours: 51814 h Type: Horizontal Drive: Hydraulic

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Ijdpfsy Uquhsx Ahysbc Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: used, Year of construction: 2013, HEDELIUS C50 C50/40/530/1800/8 Machining Center ==> Spindle running time: 8,997 h Manufacturer: HEDELIUS Model: C50 Year of manufacture: 2013 Control system: Heidenhain Machine weight: approx. 5,500 kg Ibsdpfx Aozc Rctohyec Technical data Travel in X: 1,800 mm Travel in Y: 510 mm Travel in Z: 480 mm Table size: approx. 2100 x 510 mm Feed rate: up to 8,000 mm/min Spindle speed: up to 30,000 rpm Spindle running time: 8,997 h Program running time: 10,446 h Equipment Heidenhain CNC control system Fully enclosed machining center Central lubrication system Coolant system Electronic handwheel Tool magazine Documentation available Description The machine is in very good condition and can be inspected while powered on after prior arrangement. With an X-axis of 1800 mm, the machine is ideally suited for machining long workpieces in tool, machine, and fixture construction. The comparatively low spindle running hours of only 8,997 hours are particularly noteworthy. The machine has a Heidenhain control system and reaches spindle speeds of up to 8,000 rpm. The HEDELIUS C50 stands for high precision, stability, and reliability "Made in Germany" and is ideally suited for both single-part and series production. Inspection: Possible by appointment in Bremen. _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2010, HEDELIUS C 50-1800 – Vertical CNC Machining Center – Year of Manufacture 2010 – HEIDENHAIN iTNC530 For sale is a high-quality vertical CNC machining center, the HEDELIUS C 50-1800, manufactured in Germany. This machine is ideally suited for tool and mold making, general mechanical engineering, as well as precise single-part and series production. The HEDELIUS impresses with its robust design, proven HEIDENHAIN control system, and large travel range, combined with a compact footprint. Technical Data Manufacturer: HEDELIUS Type: C 50-1800 Year of Manufacture: 2010 CNC Control: HEIDENHAIN iTNC 530 Travel (X/Y/Z): 1,800 x 510 x 480 mm Table Size: 2,100 x 510 mm Spindle Taper: SK 40 Spindle Speed: up to 8,000 rpm Tool Magazine: 20-position Max. Tool Length: 250 mm Max. Tool Diameter: 63 mm Distance Spindle – Table: 570 mm Machine Weight: approx. 5,500 kg Equipment HEIDENHAIN iTNC530 CNC control 20-position tool changer Coolant system CE marking Ibedjzk Etnjpfx Ahysc Condition The machine is in overall good and well-maintained condition. The documented spindle operating time is approximately 9,800 hours. An inspection under power is possible by appointment. Location: Germany _____ Subject to prior sale and errors in the technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Ibsdpjxzqg Iefx Ahyec

Condition: ready for operation (used), Year of construction: 2011, operating hours: 46,000 h, clamping force: 245 kN, screw diameter: 18 mm, Hydraulic injection moulding machine manufactured in 2011. This SUMITOMO SHI DEMAG Systec 25/320-80 features a clamping force of 25 t and a screw diameter of 18 mm. It offers a maximum metering volume of 23 cm³ and a mold height range of 130 mm to 480 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 25/320-80 machine we have for sale. Contact us for further details. Iedpoz Erxkofx Ahysbc - Max. Specific Injection Pressure: 2868 bar- Max. Metering Volume: 23 cm³- Mold Height: 480 mm- Min. Mold Height: 130 mm- Distance Between Tie Bars: 320 x 320 mm- Centering Hole Diameter (Ejector/Nozzle): 110 mm- Maintenance Group: 1- Core Pull: 1- Operating Hours: 46,000 hrs (Pump)- Pump Drive Power: 17.5 kW- Power Supply: 400 V ±10% / 50 Hz, 3 Ph+N+PE- Cooling Circuit: Open, separated water connection for mold and machine cooling- Cylinder / Screw: Bimetallic cylinder, wear-resistant 18 mm screw with 3-piece non-return valve- Nozzle: Open nozzle M24x1.5, flat radius, 2.0 mm bore- Integrated Sockets: 2 x Schuko 1Ph/230V/10A, 2 x IECEE 3Ph/400V/16A

Condition: new, Heidenhain LS 776 linear scale ML: 320 mm, 336 966-73 SN:27412980M + AE LS 776 reading head, 672 254-01 SN:27412981, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos Ibodpfsx Er Iksx Ahyoc

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Iedpfx Aozhtfmshysbc Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim See pictures

Condition: new, Heidenhain LS 776 linear encoder ML: 320 mm, 336 966-73 SN:28221931M + AE LS 776 read head, 672254-01 SN:28221933, unused in opened original packaging, 100% functional, delivery as per photos Ibsdpjx Er Iqefx Ahysc

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 12 1/min, stroke rate (max.): 12 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 7,300 kg, total length: 3,850 mm, total width: 2,345 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 8 × 3200 E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 8 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table make large sheets easier to position and help protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and simplify repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be set for different sheet thicknesses and materials. TECHNICAL DATA • Maximum sheet thickness: 8 mm • Maximum cutting length: 3200 mm • Blade rake angle: 1°30′ • Cutting frequency: 12 strokes/min • Back-gauge travel: 600 mm • Distance between side frames: 3450 mm • Blade length: 3300 mm • Table height: 800 mm • Motor power: 11 kW • Weight: 7300 kg • Dimensions (L × W × H): 3850 × 2345 × 1620 mm • Controller: E21S • Cutting-line indicator: Illuminated STANDARD EQUIPMENT • Motorized back gauge • Ball-guided back-gauge system • Hydraulic sheet hold-downs along the full cutting length • Segmented, individually replaceable blades • Blade-gap adjustment • Ball transfer units on the worktable • Front material-support arms Iodoyt E U Ejpfx Ahysbc • Front gauge with measuring scale • Rear safety guard • Front safety guard • Foot-control pedal • E21S controller • Illuminated cutting line CONDITION, WARRANTY AND DOCUMENTATION • Brand-new machine • 12-month warranty • Warranty and post-warranty service • CE Declaration of Conformity • Operating and maintenance manual in English The machine offers a strong combination of cutting capacity, accurate sheet positioning, straightforward operation and comprehensive safety equipment. It is suitable for general fabrication work and repeat production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Condition: used, Year of construction: 2007, functionality: fully functional, feed length Z-axis: 1,250 mm, turning diameter: 3,200 mm, turning height: 2,000 mm, faceplate diameter: 3,200 mm, DOUBLE RAM VERTICAL CNC LATHE KOLOMNA 1532 T KOLOMNA VERTICAL TURNING LATHE (VTL) • Table diameter: 3,200 mm • Maximum turning diameter: 3,200 mm • Maximum workpiece height: 2,000 mm • Two CNC-controlled rams • Ram travel: 1,250 mm • FAGOR 8070 CNC control • Motor power: 115 kW • Mechanical, hydraulic, electrical, and electronic retrofitting, completed in 2007 • Chip extractor • Complete enclosure • Cooling system Iodpfxjx Nhm Ro Ahyobc • Work light • Refrigerated electrical cabinet We also have a 1540 Kolomna VTL with a diameter of 4,000 mm.

Condition: used, Year of construction: 1975, roll diameter 440 mm throat 420 mm workpiece height 200 mm cutting speed 20 - 1550 m/min table surface area 560 x 560 mm band length 3250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 2,1 m Bandsaw with - Saw blade welding unit - Grinding stone - Saw bands Isdevu Hb Espfx Ahyobc - documentation