Used Schlatter Mesh Welder for sale (970)

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Credpfowu Tu Dex Abioc Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW - el. voltage: 3 x 400 VAC - controlled by: PC Crjdpjuv Eg Hofx Abioc - wire mesh dimension: 6000 x 2000 mm - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm - machine is operated by two workers

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) Cedpfx Aswp Ilyebisrc max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Condition: excellent (used), Year of construction: 2009, Technical Details : Year - 2009 Beam welding machine outlet height: 1400mm (UK beam from ground) Min. strap length: 0.8 m Max. beam length: 16.0 m Base width during production: 58 mm (inside diagonals) Finished beam width: 70 – 116 mm (external dimensions of bottom chords) Lattice girder production speed: max. 15 m/min Design of the wire feed speed: 18 m/min (upper and lower belt) 38 m/min (diagonals) Carrier types that can be produced: KT KTS Top belt Ø: 5 – 16 mm 5 – 7 mm Lower belt Ø: 5 – 16 mm 5 – 7 mm Diagonal Ø: 4.5 – 9 mm 5 – 7 mm Height: 70-400mm 80-310mm Division of the diagonal: 190 – 210 mm 200 mm Primary material: Cold or hot rolled reinforcing steel from coil in accordance with EN 10080:2005 in weldable quality, max. carbon content 0.20 % The line is in excellent working condition ! Crodpfx Abjrn N Efoiec

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines Codpfx Absqy Ek Asijrc 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI

Condition: excellent (used), Technical Details : Year of manufacture: 1985 (fully electric in 2007, partial in 2010 underwent a mechanical overhaul.) The mesh max. width: 1500 mm Mesh density: 15 welding heads in arbitrary distribution Increment: 20mm – 200mm. Wire thickness: 1.2mm - up to 2.2mm (max 650 N/nmm - We have already welded 2.5mm also wired.) Crodpfxsryv S Uo Abiec Energy demand: 14 kVA (max) Weight: approx. 8 tons Drive: digital servo, control (PLC). Stepless regulation.. Accessories: manual

Condition: excellent (used), Year of construction: 2004, Technical Details : Year of manufacture: 2004 The mesh max. width: 2200 mm Mesh density: 20 welding heads in arbitrary distribution (40 heads are also possible) Increment: 20mm - up to 200mm Wire thickness: 1.6mm-3.0mm (max 550Nnmm) Codpfxjryv Sij Abijrc Energy requirement: 8 kW Weight: approx. 10 tons Drive: digital servo, control (PLC).. Stepless regulation.. Accessories: manual

Condition: good (used), Year of construction: 2020, functionality: fully functional, working width: 3,700 mm, welding power (max.): 2,200 kVA, wire diameter (max.): 25 mm, type of input current: three-phase, 1. EVG QC76/144-ZL/PV Wire Mesh Welding Line Description EVG High-Performance Mesh Welding Line - Type QC76/144-ZL/PV · Max. Sheet Width: 3,700 mm (Welding width: 3,600 mm) · Sheet Length Range: 1,500 mm – 12,000 mm · Wire Diameter Range: Line wire (6 – 25 mm) / Cross wire (6 – 16 mm) · Max. Working Speed: 90 CW (cross wire) / min. · Line Wire Spacing: 75 mm – 1,000 mm (Steplessly programmable) · Cross Wire Spacing: 50 mm – 2,000 mm (Steplessly programmable) · Number of Line Wires: Max. 33 wires · Input Material: Pre-cut and straightened line and cross wires (Cold-formed/Hot-rolled) Csdey Aig Sspfx Abisrc · Power Rating: 2,200 kVA (Driving power: 120 kW) Key features · Versatility: Optimized for the economic production of special sheets and engineered fabric, even for the smallest lot sizes. · Precision: Features steplessly programmable spacing for both line and cross wires, allowing for highly customized mesh designs. · Heavy-Duty: Capable of welding large diameter wires (up to 25 mm), suitable for structural and industrial applications. · Automation: Advanced cascade welding system (automatic) for efficient multi-diameter operations. 2. EVG DRE16 Wire Straightening Machine Description EVG DRE16 High-Speed Wire Straightening and Cutting Machine · Wire Diameter Range: 8 mm – 16 mm · Max. Feed Speed: 160 m/min. · Max. Wire Strength ($Rp0.2): 600 N/mm2 · Driving Power: 85 kW · Power Supply: 380 V, 60 Hz, 3ph · Color: RAL 7001 (Grey) / RAL 3011 (Red) · Standard Compliance: EN 60204-1, IEC 60364-4-41 TN-C Key features · High Productivity: Offers a superior straightening speed of up to 160 m/min, ensuring high throughput for downstream welding lines. · Material Compatibility: Specifically designed to handle high-strength wire up to 600 N/mm2. · Reliability: Built with EVG’s renowned precision engineering for consistent straightening quality and long-term durability. * Machine can be seen in factory.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, working width: 2,440 mm, welding power (max.): 1,200 kVA, wire diameter (max.): 12 mm, type of input current: AC, wire diameter (min.): 4 mm, Refurbished Schlatter MG903 - PG24 - Longitudinal wire inserter LFE - Longitudinal wire feeder LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mesh output MVL4.2 - Mesh stacker MS12 - Control and power cabinet - Siemens S7 TIA machine control Mesh width: 2450mm Wire: 4-12mm Codpfxsy D H T Es Abiorc

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, welding power (max.): 420 kVA, wire diameter (max.): 8 mm, type of input current: AC, mesh size: 25 mm, working length: 4,000 mm, wire diameter (min.): 2 mm, Machine Profile: Schlatter MG900 PG12 The Schlatter MG900 is a high-performance, fully refurbished resistance welding line, specifically designed for the production of wire mesh panels. It can process wire diameters of up to 12 mm with a maximum mesh width of 1,250 mm and a length of up to 3,000 mm. The machine has undergone comprehensive modernization to ensure maximum efficiency and flexibility in production. Csdjy D Huiopfx Abijrc Technical Specifications 1. Main Components: Longitudinal Wire Feeder LV - Upgraded to a high-precision servo axis. - Magazine feeders for wires up to 3,000 mm in length. MG12.4 Mesh Welding Machine - Fitted with 6 transformers. - Four (4) Schlatter welding presses, 5 kN each. - Machine upgraded to 12 welding presses. Cross Wire Feeder QFD34 - Allows double wire insertion for two different line wires. - Note: The second tier is not yet installed in the photos. Mesh Extraction MVL - Driven by MS2N servo motor with CtrlX by Bosch Rexroth. - Equipped with three Schlatter mesh grippers (expandable on request). Mesh Stacking Unit MS - Automatic stacking of mesh panels (travel distance 3,100 mm). Control and Power Cabinet - Siemens S7 TIA machine control system. - Rexroth CtrlX components for high-dynamic motion control. Longitudinal Wire Loader LFE - Not included, available on request. Special Features and Advantages: - Full Refurbishment: Machine has been completely overhauled and modernized, with warranty included. - Efficiency: Fully automated operations via mesh stacker and servo-driven longitudinal wire feeder. - Future-Proof: Equipped with the latest technologies and control components. Specification: - Mesh width (cross wire length): max. 1,250 mm / min. 200 mm - Mesh length, with manual loading: max. 3,200 mm / min. 300 mm - Maximum distance between outermost line wires: 1,200 mm - Longitudinal wire spacing: 25 – 150 mm - Cross wire spacing: min. 12.5 mm, infinitely programmable - Longitudinal wire diameter: 2.0 – 10.0 mm - Cross wire diameter: 2.0 – 8.0 mm - Maximum number of longitudinal wires: 24

Condition: excellent (used), Year of construction: 2013, PRATTO equipment for zinc coated welded meshes Technical data for the machine : STARWELD PE is a high-performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets • 2 pay-off for feeding the cross wire • 36 pay-off for feeding the line wire • Fence dimensions between 1 and 3 m (2 types can be made simultaneous, example 1 m with 2 m, 1.5 m with 1.5 m, 1.2 m with 1.8 m) • Range of wire diameter 1.2 – 3 mm Cedpoyxn Rnofx Abisrc • Working speed (strokes/min) Up to 130 • Automatic stacking of rolls • ⁠PLC management

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D34E/8218, Offer Number: D34E/8218 Machinetype: mesh welder Make: SCHLATTER Type: PG8 Credpfx Abewi Thmjisc Constr. year: 1970 wire diameter: 1,5-6,5 mm working width: 850 mm line wire distance: 20-60 mm distance of cross wire: 10-100 mm Location: Europe

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,700 mm, welding power (max.): 600 kVA, wire diameter (max.): 6 mm, type of input current: three-phase, MG950 Cedpfx Aboym An Asiorc Mesh Width (Cross Wire Length) for lower feed, single-row: 200 – 900 mm for upper feed, single-row: 200 – 1700 mm for upper feed, double-row (usable width): max. 1530 mm Mesh Length: max. 3200 mm min. 350* mm Distance between the outermost longitudinal wires: max. 1600 mm Longitudinal wire pitch: min. 20 mm Cross wire pitch: min. 10 mm steplessly programmable Clear opening longitudinal wire: min. 15 mm Clear opening cross wire: min. 8 mm Longitudinal wire diameter: 2.0 – 6.0 mm Cross wire diameter: for lower feed: 1.5 – 4.0 mm for upper feed: 2.0 – 6.0 mm Longitudinal wire overhang: max. 300 mm, min. 10 mm Cross wire overhang: max. 300 mm, min. 5 mm Number of individual welding groups ESG: 12 Number of portal welding groups PSG18: 12 Max. number of longitudinal wires: 12

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Crodpfsvvf T Aox Abisc

Condition: new, Year of construction: 2025, Starweld PE STARWELD PE is a high performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets. The mechanisms are designed in a way that the produced mesh is of high quality, even when the wire processed is of a very small diameter. Products can be used for cages, fencing, etc. Features: Line & cross wire feeding from coil Edge trimming Mesh fabric slitting Fully or semi automatic system for mesh cutting, rolling & ejecting Excellent mesh accuracy Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life Specifications Model PE2100 PE2600 PE3100 Crodped Rlaiofx Abiec Mesh Width (mm) 2100 2600 3100 Min Line wire spacing (mm) 25 25 25 Min Cross wire spacing (mm) 12.5 12.5 12.5 Range of wire diameter (mm) 1.2-3 or 1.4-3 or 1.4-3.5 1.2-3 or 1.4-3 or 1.4-3.5 1.2-3 or 1.4-3 or 1.4-3.5 Working speed (strokes/min) Up to 160 Up to 150 Up to 130

Condition: new, Year of construction: 2025, STARWELD PO is a high performance mesh welding line for the production of medium & heavy weight wire or reinforcing mesh panels. It is a line appropriate for big production needs. Design is made in accordance to the specific project & mesh type parameters – e.g. there can be a rolling mechanism for the machine to produce rolls too if so desired. PRATTO can supply all the necessary auxiliary equipment. Products can be used in the construction industry. They are also used for shelves, grids, cages, pallets and containers as well as for fencing (plain & bent). Features: Line wire feeding from coil Cross wire feeding from coil Cjdpfjd Rlalsx Abiorc Edge trimming (optional) Panel stacking (optional) Panel tilting (optional) Rolling mechanism (optional) Bending unit (optional) Excellent mesh accuracy Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life

Condition: new, Year of construction: 2025, Features: Line & cross wire feeding from pre-straightened and cut bars Automatic feeding of cross wires from hopper Manual feeding of line wires Automatic Panel stacking Excellent mesh accuracy Fully or semi-automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use Credpfx Absf Ar N Ujiec High reliability & long life

Condition: new, Year of construction: 2025, STARWELD POBH is an advanced version of our high-performance mesh welding line, designed to produce high-quality wire mesh 3D fences, including Eurofence and “V”-shaped fence designs. This model is equipped with a bending unit that allows for precise shaping of wire mesh, making it an ideal choice for various fencing projects. Bending Unit: The integrated bending unit empowers STARWELD POBH to effortlessly shape wire mesh into Eurofence or “V”-shaped fence patterns with precision. This feature enables you to meet the demands of diverse fencing projects with ease. High-Quality Output: Expect nothing less than exceptional quality from STARWELD POBH. Whether you’re crafting aesthetically pleasing Eurofences or robust “V”-shaped fences, our model ensures each piece meets the highest industry standards. Tailored to Your Needs: Just like its predecessor, STARWELD POH, this model is customizable to your specific project and mesh type parameters. We can adapt the design to suit your unique requirements, ensuring optimal performance and results. STARWELD POBH is not only ideal for the construction industry but also finds its utility in crafting shelves, grids, cages, pallets, containers, and, of course, fencing. Its ability to create intricate 3D fence designs makes it a standout choice for projects that demand both functionality and aesthetics. Crjded Rlanjpfx Abisc Elevate your wire mesh production capabilities with STARWELD POBH, where innovation meets precision to redefine the art of fence manufacturing. Contact us today to discuss how STARWELD POBH can transform your fencing projects into works of excellence.

Condition: new, Year of construction: 2025, STARWELD GR is a high performance mesh welding plant for the production of electro-fused grating. A big product range can be achieved through its easy adjustments. Special designs can be adopted according to the customer needs (special technical specifications or special products). Products can be used for stairs, floorings, catwalks, platforms, fencing, etc. Features: Feeding from coil or pre-straightened and cut bearing bars Automatic or manual feeding of flat steel bearing bars Automatic feeding of round or twisted-square cross bars from coils or hopper Csdped Rlapsfx Abiorc Various bearing bar spacings: 22, 25, 30, 34 mm or different on demand Very effective grating flattening mechanisms Cross bar automatic edge trimming Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: GN2.372.44.32, Schlatter roll seam welding machine, type no. GN2.372.44.32 Very well-maintained machine in good working order, with product cooling, machine cooling, and extraction system. Largely overhauled by us recently. Complete documentation available. Csdpfx Aoy U Uz Sobierc See photo of the nameplate for more information. For further information, please contact Theo Ligtenberg.

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Only available as a complete lot! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Credpettu Sgjfx Abioc Front: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Articulated arm grinding machine for granite and marble Completely overhauled in 2015 S2H oscillating head Pneumatic pressure control Excellent condition! Superbly maintained and cared for! Crodpfsy Ufkdex Abiec Drive motor with speed control for perfect grinding results in granite and marble. If interested, a test grinding can be carried out after prior arrangement.

Condition: excellent (used), Ultrasonic welder, Ultrasonic plastic welder, used machine Manufacturer : Branson Credet H Nhuepfx Abijc Type :900 AES series actuator Overall dimensions : 1200 x 810 x 2410 mm Machine dimensions : 420 x 700 x 1470 mm Control dimensions : 450 x 450 x 180 mm Weight : 167 kg Frequency : 20 KHZ Power : 1000 W Maximum stroke length : 100 mm

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). Cedpfxjtvpilo Abijrc We also have a number of single point welding machines for steel wires.

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Codpfxey Snyco Abisrc