Used Scheurer Stm Domix 35 for sale (10,662)

Condition: new, Year of construction: 2026, Stainless steel housing Water connections: 1/2" Maximum temperature of the tap water: 65° C Dksdpfx Ajzux Slel Asu Setting range: 2 - 60° C Temperature accuracy: +/- 1° C Min./max. tap water pressure: 1 bar/5 bar Max. inlet water pressure ratio: 1:5 Max. water dosage: 999.9 l Water quantity accuracy: +/- 1% Flow rate at 1 bar and 20 °C: 18 l/min Flow rate at 5 bar and 20 °C: 40 l/min Voltage/frequency: 230 - 110 V / 50 - 60 Hz Power consumption: 25 VA All prices are quoted excluding VAT. Delivery: ex works Syke (shipping by freight forwarder possible, costs to be borne by the customer) Payment: prepayment upon order We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical changes, and errors.

Condition: new, Year of construction: 2026, - Touchscreen control Dkodpfxjzuygkj Al Aou - Plate heat exchanger, stainless steel - Stainless steel pumps for recirculation and pumping Technical data: Tank capacity: 50 liters Production: 150 liters/hour (nominal production per hour with 35 °C ambient temperature, 18°C inlet water temperature, 3 °C target temperature, complete tank emptying) Cooling capacity: 2.8 kW (useful cooling capacity) Electrical power: 400 V, 50 Hz, 1.6 kW External dimensions: 700 x 735 x 1435 mm, 165 kg All prices are quoted excluding VAT. Delivery: ex works Syke (shipping via freight forwarder possible, costs to be borne by the customer) Payment: prepayment upon order We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical changes and errors.

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone. Dkodpfx Alsyq Rdyo Asu

Condition: used, Year of construction: 2001, operating hours: 17,511 h, functionality: fully functional, machine/vehicle number: 1-5341/641134, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total width: 1,690 mm, total length: 1,900 mm, table width: 600 mm, quill stroke: 400 mm, quill diameter: 100 mm, quill travel distance: 400 mm, type of input current: three-phase, distance table to quill: 400 mm, table length: 800 mm, table height: 340 mm, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 320 mm, input voltage: 380 V, overall weight: 2,500 kg, table load: 500 kg, input frequency: 50 Hz, working range: 500 mm, tank capacity: 500 l, input current: 5 A, stroke length: 400 mm, Equipment: documentation/manual, Charmilles Roboform 35P Wire EDM Machine – Year of Manufacture 2001 For sale is a Charmilles Roboform 35P wire EDM machine, manufactured in 2001. The machine is in used condition, commensurate with its age, and is ideally suited for use in tool and mold making, as well as for general EDM applications. Machine Data - Manufacturer: Charmilles - Type: Roboform 35P - Year of Manufacture: 2001 - Machine Type: Wire EDM - Condition: Used - Operation: CNC control with handheld operating device - Work table: 500 x 400 mm - Dimensions (H x L x W): 2400 x 1900 x 1690 mm - Tool changer Dkodpfx Asz Hb Dfol Asu - Extinguishing system TECHNICAL DETAILS Travel (X, Y, Z): 350, 250, 300 mm Max. manual feed rate: 900 mm/min Electrode weight: max. 20 kg Workpiece weight: max. 40 kg Magazine configuration: 54/8 Electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Workpiece dimensions: (4x) 320 x 320 x 270 mm, (4x) 320 x 320 x 170 mm The machine can be seen in its entirety in the photos. Please refer to the pictures for the optical condition and equipment.

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, Used baguette long moulder model FVF 800 Weight range approx. 50 – 1200 g Output/hour approx. 1,200 pieces - Stainless steel housing - Mobile undercarriage - Various new parts (bearings, drive shaft, main switch, new belts) - Technically inspected, cleaned Fully functional (Photos = sample model) All prices are net plus VAT, ex works Syke. Djdpfx Alsy N S Dys Aoku Available at short notice (shipping possible at buyer's cost) Advance payment required with order We operate exclusively under our General Terms and Conditions. Subject to prior sale, technical modifications, and errors.

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table length: 3,700 mm, spindle motor power: 28 W, SORALUCE TA-A 35 CNC milling and boring center, equipped with a HEIDENHAIN iTNC 530 HSCI numerical control system, an automatic milling head, and a 40-position tool changer. Technical specifications Manufacturer: SORALUCE Dksdpfxjz Nhzds Al Aeu Model: TA-A 35 Year: 2013 Numerical control: HEIDENHAIN iTNC 530 HSCI Longitudinal travel X: 3,500 mm Vertical travel Z: 1,250 mm Transverse travel Y: 1,200 mm Table dimensions: 3,700 × 1,000 mm Spindle power: 28 kW Spindle speed: 20 to 4,000 rpm Spindle torque: 479 Nm Spindle taper: ISO 50 / DIN 69871 A Rapid traverse rates: 25,000 mm/min Machine weight: approximately 18,500 kg Equipment and options Automatic milling head with 2.5° × 2.5° indexing Automatic 40-tool changer, with horizontal and vertical tool change HEIDENHAIN control with HR 410 electronic handwheel M&H 20.41-MULTI workpiece measurement system HEIDENHAIN TT 140 tool measurement probe Longitudinal chip conveyor Transverse chip conveyor Protective enclosure with access doors 3D thermal compensation Automatic centralized lubrication Preparation for the integration of a CNC dividing head

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, Used Spiral Mixer S-Super FAB 60 - Approx. 60 kg dough, 37 kg flour - Year of manufacture: 2005 - 2-speed, 2 timers, manual/automatic mode - Bowl rotation clockwise/counterclockwise - Flour dust cover - Mobile - Painted version (grey) - Spiral motor power: 2.1/3.7 kW, bowl: 0.55 kW, 400 V Includes operating manual, fully functional, cleaned and technically inspected Dedpfxey Rkqhe Al Asku All prices are subject to VAT, ex works Syke. Available at short notice (shipping possible at buyer’s expense) Advance payment required with order. All sales are subject exclusively to our General Terms and Conditions. Sale subject to prior sale, technical modifications, and errors reserved.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: A-6.3240, Complete 2019 Wienstroth Fixture Heat Treat/Quenching Line. Furnace Temperature Max 880 Deg C, 480kW, Heating Zones: 4, Power Supply Voltage: 460/60 Volts/Hz. Refer to attachments for further equipment specs & drawings. Line to include: High Temperature Furnace w/ Material Conveyers Overhead Crane & Hoist System Quenching Bath w/ Heat Exchanger, Pumps and PLC Dkodoz Hb S Aepfx Al Asu Washing/Rinsing Station, 2 Zone, TPS & Entrance Conveyer Assembly Transfer Conveyer System, Material Handling Assembly w/ Tracks Low Temperature Temper Furnace w/ Cooling Conveyer & PLC Quenching Line PLC Controller Power Distribution Cabinets, Rittal/Wienstroth 24x Pallets Quenching Line Tooling

Condition: used, Year of construction: 2022, machine/vehicle number: T0616, with CNC control, manufactured by SODICK, type: LN2, travels: X-axis: 350 mm, Y-axis: 250 mm, Z-axis: 270 mm, with automatic tool changer with 4 tool positions, resolution: 0.0001 mm, work table (made of ceramic), size: 600x400 mm, max. workpiece weight: 550 kg, max. electrode weight: 50 kg, dielectric fluid capacity: 400 l, machine dimensions: 2080x1955x2350 mm, machine weight: 3200 kg, with CO2 extinguishing system, operating hours: 1690 h. Djdpfx Asz Nhtmel Aeku

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, operating hours: 600 h, power: 0.011 kW (0.01 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 35 t, stroke length: 300 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 60 mm, table height: 100 mm, clearance between the columns: 1,375 mm, total length: 2,250 mm, total width: 1,820 mm, total height: 2,515 mm, overall weight: 4,900 kg, controller manufacturer: Lenze, controller model: SafanDarley E-Control, working width: 1,275 mm, bending force (max.): 35 t, back gauge: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 1,375 mm, height adjustment type: electric, installation height: 1,000 mm, warranty duration: 12 months, control type: CNC control, number of axes: 7, actuation type: electric, Equipment: CE marking, safety light barrier, The E-Brake Premium 35t-1250 is the fastest servo-electric press brake on the market, manufactured by SafanDarley. Lenze servomotors controlled by frequency inverters from the same company enable fast and reliable operation of the system for many thousands of operating hours. The SAFANDARLEY E-Brake features a patented drive transmission method, which is implemented using reinforced belts. The roller system creates what is known as a multi-block or multi-pulley system. This principle has been known for years, but its successful implementation in SAFANDARLEY press brakes since 1995 has resulted in a press that is approximately 30% faster than hydraulic presses, quieter, more environmentally friendly, and eliminates the need for oil changes. Parameters: SAFANDARLEY servo-electric press brake, model E-Brake 35-1250 - Pressing force: 350 kN (35 tons) - Stroke: 300 mm - Opening: Q = 690 mm - Accuracy of the upper beam: +/- 0.01 mm - Max. bending speed: 10 mm/s - Max. speed of the back gauge fingers: 350 mm/s - Max. reach of the back gauge fingers (third point of reference): 1000 mm - Connected power: 11 kW - Machine width: 2225 mm - Machine depth: 1820 mm - Machine height: 2550 mm - Weight: 4,300 kg Dkjdpfx Ajr Axxzol Aeu - Servo-electric drive (without hydraulic system) SAFAN E-Control – numerical control system - Dual 21'' color split-screen touchscreen (The lower part of the screen enables programming, and the upper part allows viewing PDF documentation, DXF files, or a 3D visualization of the bending process) - Swivel arm - ELO Touch technology EC20 – 2D graphics program, overlay for the E-Control control system CNC axes: Y1, Y2 – CNC-controlled axes X – CNC-controlled axis deltaX – CNC-controlled axis R – CNC-controlled axis Z1, Z2 – CNC axes Safety light guard – programmable light curtain: Basic function – safety Interruption operation function – 1 cycle / 2 cycles Curtains can be disabled in safe mode WILA NSCL I HC upper adapter – hydraulic upper tool clamping system Safan OBS/3 table – lower tool mounting system, compatible with Wila/Trumpf or Amada tools, table with a width of 60 mm and a 13 mm groove Ergonomic package: cutout in the table for working in a seated position, ergonomic tables, ergonomic chair E-Bend S system – sheet thickness measurement system with automatic deflection correction The machine is in like-new condition. Inspection, testing, and presentation are possible on-site – Sosnowiec. Each unit undergoes a full technical inspection and quality testing by an authorized SafanDarley service center.

Condition: repair required (used), Year of construction: 1993, functionality: not functional, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Djdpfxsz E U Dps Al Asku Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies • Special tools included • Front supports / material supports • Foot switch • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Alzmetall pillar drilling machine AB 35 S MK 4 Spindle speeds: 130 - 3500, stepless with 2 gear stages Right and left rotation 3-step feed Original paint Table: 620 x 470, no pre-drilled holes Overhang: 300 Column: 150 Drilling stroke: 180 Coolant system, quick-action drill chuck, emergency stop, tachometer – all in working order. Dimensions: H 1.97m, D 0.95m, W 0.62m Dedpfx Alez I N Tqe Asku Weight: approx. 600 kg Condition: original, runs smoothly and quietly, excellent runout. Free loading at D-88433 Schemmerhofen.

Condition: ready for operation (used), Year of construction: 1978, Immediately available, free of insolvency: Dkodpfxjz Ixpze Al Aeu Hydraulic press brake, Promecan Type RG 35 - 15 Year of manufacture 1978 Pressing force 35 tons Bending length 1500 mm Throat depth 200 mm Stroke 100 mm L/W/H 1700/1040/2000 mm Weight 3 tons Tools included Drive power 3.5 kW Price: EUR 2,750.00 plus VAT, ex works

Condition: used, Year of construction: 2006, functionality: fully functional, saw blade diameter: 380 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,550 mm, saw blade speed: 2,800 rpm, overall weight: 280 kg, For sale is an elumatec SA 73/35 sawing machine, manufactured in June 2006. The machine is suitable for the automatic cutting of aluminum. Dodpfjz D Ahmsx Al Asku

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, power: 1.9 kW (2.58 HP), year of last overhaul: 2026, SV 140 Premium • Weight range: 200 g - 1350 g; double pieces: 400 g - 2700 g • Electro-mechanical control, swiveling • Motorized weight adjustment • 800 / 1600 pcs/h, 2 speed levels • Flour duster • White painted finish • 80 kg hopper with safety grid, laterally swiveling, with shut-off function • Mobile on wheels • New weighing chamber/drum made of stainless steel (acid-resistant), Teflon piston • Newly painted and fully refurbished (2026) • Optional at extra cost: - Tilting device (stainless steel version) €950.00 - Stepless speed control via frequency converter €1,000.00 All prices are exclusive of VAT, ex works Syke. Dkodpey Rztasfx Al Aju Available at short notice (shipping possible at buyer’s expense) Advance payment upon order We operate exclusively according to our General Terms and Conditions. Subject to prior sale, technical modifications, and errors. Photos are for illustrative purposes only.

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, power: 1.9 kW (2.58 HP), year of last overhaul: 2026, SVC-N 150 EP Compact • Weight range 250 g - 1600 g, double piece 500 g - 3200 g • EP computer control, 50 programs, swiveling • Infinitely variable speed via frequency converter • Motor-driven weight adjustment • 600 - 2500 pcs/h • Flour duster • Stainless steel housing • 80 kg hopper with safety grid, laterally swiveling with automatic shut-off function • Mobile • Measuring chamber/drum made of stainless steel (acid-resistant), Teflon piston • Newly painted and completely overhauled (2026) • Optional at additional cost: tipping device (stainless steel version) €950.00 + VAT All prices are subject to VAT and ex works Syke. Dkodpfsy N S Huox Al Aou Available at short notice (shipping possible at buyer’s expense) Advance payment required upon order We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical modifications, and errors. The photos are sample images of the model.

Condition: used, functionality: fully functional, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) Dkjdpsz Ix D Ssfx Al Aeu This state-of-the-art 4-pipe heat pump has been specifically developed for the flexible, simultaneous or independent provision of chilled and hot water. Thanks to cutting-edge inverter technology and the environmentally friendly refrigerant R290, the unit offers maximum energy efficiency with a minimal environmental footprint. The device features robust enclosure panels and integrated sound insulation in the compressor compartment to ensure extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the unit is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Intelligent operating modes for maximum energy savings • Flexible 4-pipe logic system: Complete hydraulic separation of air conditioning and domestic hot water (DHW). The control system regulates the pumps fully automatically as needed and allows for exclusive DHW activation via a digital input. • Highly efficient combined cycle (simultaneous operation): • In cooling mode: When DHW is required, the system utilizes complete heat recovery. It provides free hot water while the fan stops. • In heating mode: The system prioritizes DHW production and automatically switches back to room heating once the setpoint is reached. • On-demand individual operation: Efficient single-mode operation for cooling, heating, or hot water only, with precise inverter control to avoid partial load losses.

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, power: 0.75 kW (1.02 HP), • 20-liter stainless steel bowl • For approx. 4 kg of flour • 3 tools • Digital control (stepless speed adjustment) • Machine body painted white • Dimensions: W = 480 D = 680 H = 1500 mm Dedpey Rkxxjfx Al Aoku • 400 V, 3 phases, 0.75 kW • New machine • Including special equipment: bowl scraper All prices are exclusive of VAT, ex works Syke. Available at short notice (shipping possible at buyer's expense). Advance payment required upon order. We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical changes, and errors.

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Dkedpfoz Iqm Sjx Al Aou Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2013, operating hours: 8,413 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 diesel forklift, year of manufacture: 2013, operating hours: only 8,413h! Previous owner: German Armed Forces. Rated lifting capacity: 3,500kg. Lifting height: 3,500mm. Duplex mast. Twin tyres on front axle. Fork length: 2,400mm. Hydraulic sideshift. Full cabin. Diesel engine: [30kW/41hp]. Weight: 5,034kg. Good condition! Immediately operational! Dksdoz Nu A Iepfx Al Asu Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ...) will be happy to assist you. Further information available on our website. Subject to prior sale and errors excepted. Cabin = Further information = Lifting capacity: 3,500kg Overall height: 250 cm For further details please contact Tobias Ebert.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, pressure (max.): 16 bar, Adsorption dryer Parker Zander K-MT 35-95/D3 Generation 3 Manufacturer: Parker Hannifin Manufacturing S.r.l. / Parker Zander Model: K-MT 35 Design: K-MT 35-95/D3 Generation 3 Serial number: 399893960001 Year of manufacture: 2019 Dedoz Dlafspfx Al Asku Voltage: 230 V Frequency: 50–60 Hz Protection class: IP65 Max. operating pressure: 16 bar Min. operating temperature: 1 °C Max. operating temperature: 50 °C Condition: new / unused Machine type: Adsorption dryer for compressed air

Condition: used, Year of construction: 2000, power: 1.6 kW (2.18 HP), input voltage: 380 V, input frequency: 50 Hz, We offer this used IBARMIA AX-35 column drill, manufactured in 2000. Type: AX-35 Serial number: 924-AB Voltage: 220/380 V Dkodpfsz Hk Tcsx Al Aou Frequency: 50 Hz Power: 1.6 kW Year of manufacture: 2000 If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2013, operating hours: 9,214 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 diesel forklift, year of manufacture: 2013, operating hours: only 9,214h, previous owner: German Armed Forces, rated capacity: 3,500kg, lift height: 3,500mm, duplex mast, dual tires on front axle, fork length: 2,400mm, hydraulic sideshift, full cabin, diesel engine: [30kW/41hp], weight: 4,666kg, good condition, immediately ready for use! Leasing or financing offers available upon request. Mr. Mihm will be happy to assist you by phone. Further details can be found on our homepage. Errors and prior sale excepted. Dedpfsz Nuzdox Al Ajku Cabin, rental possible = Further information = Load capacity: 3,500 kg Please contact Tobias Ebert for more information.

Condition: new, Year of construction: 2026, input voltage: 400 V, • 140-liter stainless steel tank • 3 tools • Digital control (stepless speed) • Dimensions: W = 940 mm, D = 1250 mm, H = 2100 mm, weight 840 kg • 400 V, 3 phases, 3 kW • New machine INCLUDES the following special equipment: - Tank scraper - Entire housing made of stainless steel - Tank carriage All prices are quoted excluding VAT, ex works Syke. Short delivery time (shipping possible upon assumption of costs) Payment in advance upon ordering Dedpfx Alezuymde Aoku We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical changes, and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 60 l, Equipment: CE marking, • Stainless steel housing • Cooking capacity: 4 - 48 liters • Manual swivel mechanism for tilting the kettle • Mobile • 2-speed • 1 timer Optional (at an extra cost): - Drain with shut-off valve - Reinforced drive for the agitator - Direct temperature control of the cooking medium (via digital display) - Lid with bulk material opening (Photo shows a model example) All prices are quoted excluding VAT. Delivery: ex works Syke (shipping via freight forwarder possible, costs to be borne by the customer) Dksdpfxey Rl H Rj Al Asu Payment: prepayment upon order We operate exclusively according to our General Terms and Conditions. Subject to prior sale, technical changes, and errors.