Used Scantool 3000 Slmt for sale (5,118)

Year of construction: 2021, condition: new, Motor-driven upper beam and bending beam Oversized chain transmission Electronically adjustable top beam strength Prepared for mounting a back gauge Foot pedal control with emergency stop Self-lubricating bearings and guides Adjustable scale reading for the correct bend angle. Drive motor 0.75 kW Dimensions 3750x650x1100 mm Weight 1540 kg Plate width 3020 mm Plate thickness 1.0 mm Pedpfxohzr Swj Angogu

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us. Psdpfx Aezyc Rijngsgu

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available. Pjdjz Hvl Repfx Angjgu

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility Podpfx Anoy Rvfqogogu In current daily use Ready for removal Sealing bar is 250mm wide See video attached Price € 7,500 We can organise shipping / delivery for you.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Pgjdpfoz Smqksx Angou Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: excellent (used), Year of construction: 2022, operating hours: 2,540 h, machine/vehicle number: A1121D0047, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: Touchpoint HMI, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: TruDisk 3001, laser hours: 738 h, laser power: 3,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 2,500 mm, table width: 1,250 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,535 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 108 m/min, feed rate Y-axis: 108 m/min, workpiece weight (max.): 150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer a well-maintained TRUMPF TruMatic 3000 (K09) combined laser and punching machine, manufactured in 2022. Manufacturer: TRUMPF Model: TruMatic 3000 (K09) Material number: 2448753 Power frequency: 50 Hz Voltage: 400 V Diagram number and version: 93120-5-200_05 Serial number: 407618918 Year of manufacture: 2022 Equipment number: A1121D0047 This is an excellent machine located in a clean production environment. It has only been used to process thin sheet metal under 3mm. It has almost all optional features selected from TRUMPF. It is equipped with SheetMaster and SortMaster. It comes with more than 500 tools, automatic QuickSet, and QuickSharp. It is currently in operation and can be inspected by appointment. If you have any questions or require further information, please feel free to send us a message or call us. Pgodpfx Ane Af Uvyjgsu

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Container rotating device, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed continuously adjustable, 80 to 1600 mm/min. Pjdpfsgu Edyjx Angogu Diameter 40mm to 1400mm Roller diameter 200mm L: 800 x W: 370 x H: 450 Model or color variations possible.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 20307, functionality: fully functional, power: 108 kW (146.84 HP), input voltage: 400 V, input current: 270 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,120 °C, inner dimension length: 3,000 mm, inner dimension width: 450 mm, inner dimension height: 200 mm, total length: 16,800 mm, total width: 1,726 mm, total height: 2,398 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Conveyor belt tunnel furnace manufactured by Mahler. We used this furnace for the annealing of C-steel parts, utilizing 100% Exogas. The control system has already been upgraded, and all necessary maintenance and repair work has been carried out regularly. Inspection is possible by arrangement. Pgsdpfo Af Imajx Angju Disassembly and removal will be carried out by the buyer, in accordance with the applicable safety and environmental regulations.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TECHNICAL DETAILS General Information Model: TruLaser Cell 3000 Machine type: highly dynamic and precise CNC laser machine Machine bed: polymer concrete Axis concept: cantilever system Travel ranges and axes Travel ranges X/Y/Z: 800 × 600 × 400 mm X/Y axes: linear motors Pgsdpfx Anoz R Dz Aogeu Measuring system: direct, absolute measuring system Z axis: linear guides and ball screw drive Control and operation Control system: TRUMPF based on Siemens Sinumerik 840D sl Operation: panel PC for process monitoring Cooling and electrical system Control cabinet: integrated Water cooler: water-air Laser unit Laser unit: TruFiber 400 (G2) Laser type: single-mode fiber laser Application area: welding and cutting Laser power: 400 W at the fiber end Beam quality M²: 1.1 Fiber optic cable: 6 m LLK-B Operating mode: CW / modulated Modulation frequency: max. 50 kHz Pilot laser: standard Coil feeder Manufacturer: TRUMPF Design: for strip material Material length: max. 800 mm Material thickness: 0.1–1.9 mm Material width: 40–250 mm Width adjustment: by handwheel Pneumatic coil feed: 50 mm stroke, right EQUIPMENT Tensioning and guiding module for coil material Guided workpiece removal, selectable as box or funnel system Pneumatic coil feed Coil feed control Panel PC for process monitoring Integrated control cabinet Water-air cooler Commissioning and training

Condition: used, functionality: fully functional, Year of construction: 2011, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, We are offering this used TRUMPF TruMatic 3000 laser cutting machine, manufactured in 2011. Maximum cutting force: 165 kN Laser power: W Machine number: A0111A0021 Year of manufacture: 2011 Mains voltage: 400 V Pgedj Aaxt Repfx Angsu Mains frequency: 50 Hz Connected load: 18 kVA Control voltage: 24 V Required fuse rating: 3 × 35 A Compressed air connection: 7 ± 1 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Revolutions per minute 1400 Voltage 3x400V-50 Hz Power (kW) 3 Disc size, drive wheel (ø mm) 200x100x28 Sanding belt (mm) 100x1600 Pipe dimension (ø mm) 21-76 Extraction capacity (m³/h) 600 With extraction Length (mm) 1430 Width (mm) 810 Height (mm) 1350 Pgedpfezuv Iqox Angju Net weight (kg) 205 The Scantool 100 RSX is the perfect pipe grinding machine for all types of pipes and profiles. It simplifies welding and provides a better finish. The Scantool 100 RSX has been designed with serial production in mind, where precision and clean work are required. It is used in the manufacture of railings, frames, go-karts, lattice trolleys, wheelchairs, ship fittings, handrails, gates, doors, furniture frames, and stainless steel pipe and profile work for the food industry, among other applications. The Scantool 100 RSX grinds pipes and profiles made of any material with a diameter of 21 to 76 mm. Integrated extraction The Scantool 100 RSX features an integrated extraction system that removes most of the grinding dust from the sanding belt. When the Scantool 100S is mounted directly behind the grinding machine, the best possible dust collection solution is achieved. The Scantool Cyclone 100S is available as an option. The Scantool pipe grinding machine, model 100 RSX, offers the following advantages: • The only pipe grinding machine on the market where the grinding unit is adjusted to the desired grinding angle. • Therefore, it does not require any lateral space when grinding long pipes. • Every angle can be adjusted quickly and easily – without tools. • Precision grinding of pipes and profiles at all angles. • Perfect adjustment of the contact roller to the desired diameter. • High quality and robust side guide. • Extremely well suited for serial production.

Condition: good (used), functionality: fully functional, Universal lathe SU63A/3000, accessories. Pgsdpfx Ao Af Ah Nengsu

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure Pgsdpfxjz Rl Hyj Angou - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. Pjdez Iww Rspfx Angegu The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Pjdpfoz Ixzkox Angogu

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mm Turning length : 956 mm Main Spindle: Technology:Belt-driven spindle Speed (max.):3,000 rpm Pjdpfx Ane Aau T Hjgegu Power (max.):26 kW Bar capacity:91 mm Workpiece clamping:3-jaw chuck, SAMCHULLY HS-12 Tool holder: Technology:12-station turret Tool holder:BMT65 Tool drive:5,000 rpm Travel in X/Y/Z:215/-/560 Main Spindle: Technology:Trailed tailstock Stroke:100 mm Quill diameter:110 mm Taper:MT5 Main Spindle: Chip Management:Chip Conveyor Coolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 bar Tool Measurement:Automatic Measuring Arm Automation:Prepared Finished Part Removal:Part Catcher with Collection Box Setup Mode:Electronic Handwheel

Condition: used, Year of construction: 1987, Parallel lathe PBR, type TM-30 Distance between centers: 3000 mm Max. diameter over bed: 620 mm Max. diameter over cross slide: 400 mm Max. diameter in bed gap: 860 mm Spindle diameter: Ø 105 mm Spindle speed: 15 – 1500 rpm 3-jaw chuck, Ø 315 mm Year of manufacture: 1987 Motor: 15 hp Threading: Metric + Whitworth Tailstock: MK5 Equipment: 1 x 3-point fixed steady rest Pede Acd N Nepfx Angsgu Rapid traverse Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4.5 t

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Psdpez S Afpofx Angsgu Errors and omissions excepted.

Condition: used, Year of construction: 2022, functionality: fully functional, A GEA decanter CF 3000, year of manufacture 2022, is available for sale at our location in 55569 Monzingen. The decanter is used and has minor signs of wear. Psdpoz I S R Sjfx Angegu Currently, the decanter is still connected to the power supply and can be inspected by appointment. If you are interested, we will gladly send you a data sheet with detailed information about the system upon request. Dismantling, loading, and transport are the responsibility of the buyer.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Brand: PFG Machine Tools Model: CL Vumaz X 3000 Pgsdpfjz Iaw Tox Angsu Machine Type: 5-axis moving column machining center Year of Construction: 2010 CNC Control: HEIDENHAIN iTNC-530 Axis Travels X-axis travel: 3,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm A-axis travel – Tilting head: +95° / -95° C-axis travel – Rotary table: 360° Work area for pendulum machining with vertical spindle: 2 zones of 1,300 × 1,000 mm Rapid traverse rates for X / Y / Z axes: 30,000 mm/min Main Table Table dimensions: 3,200 × 1,060 mm Maximum table load: 2,500 kg/m² Diameter of rotary table: Ø 800 mm Maximum rotary table load: 2,500 kg C-axis with 360° rotation Spindle Spindle taper: HSK-A63 Maximum spindle speed: 18,000 rpm Spindle motor power: 25 / 38 kW Spindle motor torque: 116 / 200 Nm Automatic Tool Changer Magazine capacity: 32 tools Maximum tool diameter with occupied positions: Ø 80 mm Maximum tool diameter with empty positions: Ø 130 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool selection: fixed position Dimensions and Weight Approximate machine dimensions: 5,800 × 3,800 × H 3,500 mm Net machine weight: 24,000 kg Power consumption: 40 kVA Measuring Systems Measuring scales on X / Y / Z axes Automatic tool presetter Renishaw Measuring and positioning system for linear axes Coolant and Chip Management Coolant collection tank Chip conveyor Washing pumps CTS pump for high-pressure coolant through the spindle Spindle line cooler Dedicated fume extractor Accessories Set of HSK-A63 tapers Various tools Renishaw tool presetter Dedicated fume extractor 2 magnetic tables Zero points Tank and chip conveyor Washing pumps High-pressure CTS system Spindle line cooler Scales on X / Y / Z axes Documentation Machine manuals Electrical diagrams CE Declaration of Conformity Main Features 5-axis moving column machining center HEIDENHAIN iTNC-530 CNC control Large X-axis travel of 3,000 mm Y and Z axis travels of 1,000 mm Tilting head with A-axis from +95° / -95° Rotary table Ø 800 mm C-axis rotation of 360° Possibility of pendulum machining on 2 zones of 1,300 × 1,000 mm High-speed spindle up to 18,000 rpm Spindle power 25 / 38 kW Maximum torque 116 / 200 Nm HSK-A63 tool holder Automatic tool changer with 32 tools Rapid traverse rates up to 30,000 mm/min Renishaw tool presetter Scales on X / Y / Z axes High-pressure CTS system through the spindle Spindle line conditioning Chip conveyor and washing system Dedicated fume extractor 2 magnetic tables with zero points Complete with a set of HSK-A63 tapers and various tools Complete with manuals, electrical diagrams and CE Declaration

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Pgedpfx Ajzn N Ikengeu

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, pressing force: 100 t, clearance between the columns: 2,600 mm, Make: Gasparini Model: PSG 100 Year of manufacture: 1994 Type: Press brakes Control: CNC Controller: upgraded DELEM DA-65R controller Crowning: yes (hydraulic crowning) Press force (tons): 100 tons Working width (mm): 3000 mm Distance between columns (mm): 2600 mm Podpfx Aj Aa Dc Dsngsgu Throat depth (mm): 360 mm Back gauge stroke (mm): 650 mm Power (kW): 7.5 kW Dimensions L x W x H (mm): 3500 x 1550 x 2600 mm Machine weight (kg): 9000 kg

Condition: good (used), Year of construction: 1981, machine/vehicle number: 2627, Offer 26236 Technical Data: - max. working width 3040 mm - max. material thickness ST 37 4 mm - swiveling upper beam Pgsdoz Nypgepfx Angju - bending angle adjustment, electronically pre-selectable 0 - 135° - max. lifting height of the upper beam 350 mm - lifting height of the upper beam, electronically pre-selectable - adjustability: - of the bending beam 125 mm - of the lower beam 125 mm - upper beam drive 400 V / 4.0 kW - bending beam drive 400 V / 5.5 kW - space requirement approx. W 3950 x H 1600 x D 1200 mm - weight approx. 4800 kg - includes: - foot pedal - bending rails - backstop

Condition: good (used), Year of construction: 1988, machine/vehicle number: 47800, Offer 26308 Pgjdpfx Anez Ndu Sjgsu Technical specifications: - Maximum working width: 3040 mm - Maximum material thickness at 40 kp/mm² tensile strength: 2 mm - Electronic adjustment of bending angle: 0 - 180° - Automatic sequential control for a complete working process - Maximum upper die setting: 250 mm - Maximum opening width/stroke of the upper die: 350 mm - Height adjustment: - Upper die: 30 mm - Lower die: 90 mm - Upper die drive: 400 V / 1.5 kW - Lower die drive: 400 V / 4.0 kW - Space requirement: approx. W 4450 x H 1650 x D 2100 mm - Weight: approx. 3900 kg - Includes: - Point rail + lower die rail - E-foot switch

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Table length: approx. 3,000 mm Table width: approx. 500 mm Spindle speed: up to 6,000 rpm Tool holder: SK 40 Tool positions: 22 MACHINE DETAILS Control system: Heidenhain TNC 407 EQUIPMENT Pods Afxrqopfx Angsgu 22-position tool changer Coolant system Heavy-duty frame construction Additional angular/universal milling head 4/5-axis machining possible