Used Samsys Round Bar Loader for sale (20,335)

Condition: used, Year of construction: 2000, bar material dia. 5 - 80 mm Bar length 250 - 1.550 mm bar length 1.550 mm longitudinal feed 600 mm height adjustment 775 - 1.175 mm dimensions of the machine ca. 2,25 x 1,10 x 1,80 m weight of the machine ca. 0,5 t Bar Feeder SAMSYS - Multisam MUS 2000 Iedpfozkvt Ejx Aa Esaw - NOT TESTED - for parts

Year of construction: 2023, condition: used, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm bar length: max. 1500 mm Iodjy Ndg Hjpfx Aa Eoaw The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2004, condition: used, bar material dia. 6 - 120 mm Bar length 100 - 1.600 mm bar weight max. 63 Kg feed length 1.000 mm longitudinal adjustment 600 mm machine weight ab. 600 kg dimensions of the machine ca. 2,2 x 1,5 x 1,5 m Iaedpfxjyhhris Aa Esw Current operating hours display: 4867 hours

Condition: used, Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. The advantages of CMSP/CMSPF barfeeders at a glance: Iodpfxeft Ti Ts Aa Eoaw - short loading time - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running - quick change of the diameter to be machined - short design - space saving - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or *

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 19115035, type of input current: three-phase, The cylindrical milling machine can be used to produce finished diameters ranging from 40 to 160 mm. The four cutter heads are continuously adjustable and each carries a finishing cutter and a roughing cutter. The drive motor for the cutter head has a power output of 30 kW, and the feed motor has a power output of 3 kW. Iasdpezlhamjfx Aa Ejw

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Material feed slide length: XLL Iaedpjzk E Irefx Aa Eew Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader robot system for part loading and unloading. • 1.5-meter CNC bar feeder. • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool drive: 4 kW. • Spindle nose: A2-6. • Maximum turning diameter: 370 mm. • Maximum turning length: 920 mm. • Bar capacity: 67 mm. • Prismatic guides on all axes. • Two Kitagawa 250 mm hydraulic chucks per spindle. • Separate compartment for the inspection of machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load monitoring and tool wear detection. • Automatic inter-spindle part transfer system with torque control. • Fanuc CNC. Iasdpfozl Rfljx Aa Ejw • Fanuc motors, servos, electronics, and controls. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear-mounted, hinged chip conveyor. • Complete set of static tool holders for external and internal machining included. • Complete set of motor-driven axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate availability, unless previously sold.

Year of construction: 2004, condition: good (used), Bar loader magazine: IRCO ILS RBK 10016 Year: 2004 SPECIFICATIONS Isdpfxszkbtwe Aa Eeaw Bar capacity: 5 - 100 mm Bar : 1200 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar loader. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. Iodpfx Aozladwea Eeaw * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: good (used), Year of construction: 1995, - Max. turning diameter: 160 mm - Max. bar diameter: 65 mm - 2 x tool slides, travel 70 mm - 2 x cross slides, travel 70 mm - 8-position turret, non-powered - Max. main spindle speed: 7,500 rpm - Chip conveyor Iaodpfozidcrex Aa Ejw Accessories - Bar feeder IEMCA TAL 65/32 Dimensions (L x W x H): - Machine with chip conveyor: 4200 x 1385 x 1800 mm - Bar feeder: 4000 x 800 x 1400 mm Total weight: 6,500 kg

Year of construction: 2001, condition: ready for operation (used), A KFT bar feeder is offered. Bar diameter: approx. 15mm, Bar length range: approx. 150mm/1215mm, Magazine width: approx. 600mm, Material change time: approx. 18-25s, Alignment accuracy: +/-0.5mm. Machine dimensions: approx. 1500mm/1200mm/1400mm, Weight: approx. 250kg. Inspection possible by appointment. Isdpfx Aaszka N Ro Eeaw

Year of construction: 2007, condition: ready for operation (used), An automatic bar feeder with bundle magazine for multi-spindle automatic lathes is available. Round material diameter range: 4mm-45mm, square material side length range: 4mm-36mm, max. bar length: 4200mm, working height range: 1030mm-1430mm, max. bar weight: approx. 90kg. Machine dimensions X/Y/Z: approx. 4600mm/1100mm/1300mm, weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2026. Iaodezgwxzspfx Aa Ejw

Year of construction: 2008, condition: ready for operation (used), A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible. Isdpfx Aaozf Nb Es Ejaw

Condition: good (used), Bar length 3000 mm Iedpfx Aajgvz N Ee Esaw Max bar diameter 65 mm Tubes diameters : 65 mm Dimensions 3900 x 1000 x 1200 mm Weight 1000 kg

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Round bars diam. Max. 80 mm Hexagonal bars key min. 15 mm Hexagonal bars key max. 65 mm Min. bar length 1200 mm Iodpfxevi Eyps Aa Ejaw Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Max. cut length 300 mm

Condition: good (used), Bar length up to 1600 mm. Some parts missed. For spare parts. Ijdpehvz Hzjfx Aa Esaw

Condition: like new (used), Year of construction: 2004, operating hours: 2,177 h, functionality: fully functional, machine for producing cylindrical logs with a diameter of up to 400 mm and a length of up to 10 m. Iaodpfx Aaozcgtbe Eow

Condition: like new (used), Year of construction: 2021, operating hours: 1,211 h, functionality: fully functional, Machine for manufacturing wooden posts and stakes. Processing length: 1.2-5 m. Produced diameters: 40-140 mm. The milling head has 8 knives. Material clamping is mechanical. Processing speed: 5-14 m/min. Iodpfjzcd Ensx Aa Esaw

Condition: excellent (used), Year of construction: 1989, operating hours: 7,384 h, functionality: fully functional, total width: 1,000 mm, total length: 5,500 mm, total height: 1,650 mm, This machine is designed for the production of wooden posts and stakes with a diameter of 40-140 mm. The length of the processed material is 1.2-6 m. The processing speed is 5-25 m/min. The first milling head has a diameter of 160 mm, and the second has a diameter of 140 mm. The material is clamped pneumatically. Iasdpszcd Agofx Aa Eew

Condition: used, Year of construction: 2004, The used TOP AUTOMAZIONI X-FILES automatic bar feeder is a valid alternative to the more traditional bar pusher for performing unattended bar machining on production CNC lathes. Multilayer, year of manufacture 2004, CE compliant; maximum bar diameter: 75mm maximum bar length: 3300mm Iaodpjx Nqi Isfx Aa Eow

Year of construction: 2025, condition: like new (used), functionality: fully functional, I sell materials of various diameters and qualities: - Material D2 (W.N.r. 1.2379), diameter = 29 mm, weight = 1089 kg Iajdjy Ufaropfx Aa Eow - Material D2 (W.N.r. 1.2379), diameter = 33 mm, weight = 1050.18 kg - Material D2 (W.N.r. 1.2379), diameter = 65 mm, weight = 52.10 kg - Material OCR8W SIHARD S471 – BOHLER K360, diameter = 26 mm, weight = 595.92 kg - Material OCR8W SIHARD S471 – BOHLER K360, diameter = 33 mm, weight = 1428.56 kg - Material OCR8W SIHARD S471 – BOHLER K360, diameter = 40 mm, weight = 2219.50 kg

Condition: new, Year of construction: 2026, functionality: fully functional, A machine for beveling wooden posts and poles. Iaodpfx Asy Tx U Tea Esw Processes diameters ranging from 80 to 200 mm. Cutter head motor power: 2.4 kW. Number of knives: 2.

Condition: good (used), Bar loader LNS ECO LOAD Iaodpfxolg Aq Ao Aa Eew

Condition: good (used), For 5 meters bars Iaodpfsgvz Nhox Aa Eow

Condition: good (used), Year of construction: 1998, Bar feeder Breuning IRCO ILS RBK 7212 Technical data: Type: ILS RBK 7212 Year of manufacture: 1998 Connection: 400 V Power: 1 kW Material diameter: approx. Ø 12–72 mm Bar length: up to approx. 720 mm (short bar feeder) Automatic feed Scrap piece ejector present Control panel with controller Accessories: Comprehensive set of guide channels (various diameters) Additional pusher rods Documentation available Isdpfoy Ez Exox Aa Esaw Various spare parts (see photos)