Used Safop Leonard 1500 for sale (4,439)

Condition: excellent (used), Year of construction: 1971, Centre lathe (parallel lathe) Brand: SAFOP Model: LEONARD 1500 Year: 1971 Specifications: Max. swing over bed (bed with 4 guideways): 2,200 mm Max. swing over carriage: 2,000 mm Max. turning length: 10,000 mm Max. load between centres (without steadies): 15,000 kg Spindle speeds (4 ranges): 1–100 rpm Tailstock quill diameter: 190 mm Quill stroke: 310 mm Spindle motor power: 40 HP Equipped with: 4-jaw chuck, dia. 2,000 mm 3 roller steadies Bwodpfx Afow Az Hdemsp

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Bwsdsyga Utspfx Afmjp Sale as shown in the pictures.

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 2,030 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 1,700 mm, table length: 2,200 mm, table width: 1,800 mm, table load: 12,000 kg, Deep hole drilling machine Ixion (drilling depth 1500mm, X 2030mm, Y 1800mm, Z 1700mm) The base machine is a PEGARD drilling machine AF 13 (year of manufacture 1976, machine weight approx. 32 t) 1996: Retrofit and conversion to a deep hole boring machine (the conversion was carried out by ROTTLER Maschinenbau GmbH - Mudersbach) 2024: Overhaul (spindle bearings renewed, drill bushing holder/coolant supply disassembled and cleaned, hydraulics for tool clamping repaired, coolant system and hydraulic unit cleaned and inspected, etc.) Working ranges: - X-axis (longitudinal) 2030mm - Y-axis (drilling unit vertical) 1800mm - Z-axis 1700mm Bwjdpsy Rhzwjfx Afmjp - Drilling depth in one operation 1500mm - B-axis (rotary table) 0-360° Drilling unit: - Main spindle ISO40 - Spindle speed 60-6000 rpm - Drive power at 100% ED 7.5kW NC rotary table (B-axis) - Table surface 2200x1800mm - Rotary axis 0-360° - Max. table load 12,000kg - Positioning accuracy +/-15 sec Coolant system/chip conveyor - Tank size approx. 1000l - Coolant pressure max. 80 bar - Flow rate max. 46 l/min - Paper band filter - Scraper conveyor/chip conveyor CNC control - Mitsubishi M325 with 14" color screen - Integrated tool breakage monitoring by querying the torque of the main spindle - Real-time process variable visualization of torque - Deep hole drilling technology programs - Portable electronic handwheel

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm Bedpfxeyupd Ho Afmowp - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: used, functionality: fully functional, spindle bore: 165 mm, For sale: heavy-duty CNC lathe XYZ SL 1100 / 1500 mm in very good condition. The machine was purchased in 2019 and is ideal for machining large and heavy workpieces in single-piece and small-batch production. Technical specifications Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Year of manufacture: 2019 Control system: Siemens ShopTurn / Siemens CNC 840D Centre distance: 1,500 mm Maximum swing over bed: 1,100 mm Spindle bore: 165 mm Main drive: 70 kW Bwodpfszba N Hjx Afmjp Speed range: up to 660 rpm Bed width: 558 mm Tailstock fitted Automatic central lubrication Coolant system Full enclosure Heavy-duty cast iron machine bed Electric tailstock Large chuck Solid heavy-duty lathe design Safety enclosure Coolant system Work area lighting Applications: The XYZ XL/SL series has been specially developed for machining large and heavy workpieces. The solid cast iron construction, high spindle power and large spindle bore enable the cost-effective machining of: Shafts Flanges Rollers Hydraulic components Machine components Steel and cast components The series is designed for workpiece weights of several tonnes and ranks among the heavy-duty industrial machine tools in its class. Condition The machine is in good condition No visible damage Viewing available by appointment Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: new, For sale: High-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). ⚙️ Technical Specifications Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN Bwsdpfsyzirxjx Afmsp 📏 Dimensions Approx. internal diameter: 125 mm Total length: approx. 1500 mm ✅ Benefits ✔ reputable manufacturer BOA ✔ excellent corrosion resistance ✔ long service life ✔ vibration and stress damping ✔ flexible design ✔ fast installation (flanged) 📦 Scope of delivery 1x compensator DN125 (as shown in the photos)

Condition: like new (used), 1500 m² storage platform, Schäfer R3000, 3 levels Bwsdpfx Afshzw Hiemsp Used, in top condition, like new, see pictures. Ground floor: steel structure storage platform. Above: 2 levels of shelving system, Schäfer. Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 levels Partial sale possible. Negotiable price: upon request! Goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5000 linear meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) We buy/sell: We are constantly looking for or offering numerous items from various areas: - Complete and thorough business space clear-outs - Business liquidations - Fast, flexible, and efficient! - We also clear and/or dispose of goods for insolvency administrators. Write to us with a few keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: excellent (used), Approx. 1500 m² single-story steel platform Used, in good condition, see pictures. Manufacturer: STOW Length approx. 58.5 m Width approx. 54.6 m Height (bottom edge) 3.4 m Height (top edge) 3.7 m Load capacity 500 kg/m² C-profile and sigma-profile construction Fastened with screws and nuts Adjustable grid spacing in length Floor construction: 38 mm chipboard, highly compressed, tongue and groove Underside white, top side grey coated Negotiable price: Offer upon request! Partial sale possible! Dismantled and loaded. Goods are in stock. Transport costs available upon request. Inspection possible at any time by appointment. Further information upon request. We constantly have over 5000 linear meters of pallet racking in stock from numerous manufacturers. Bodpfed S S N Rox Afmjwp (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our general terms and conditions, all prices excluding VAT, ex warehouse.) Purchase/Sale: We are continuously looking for and offering numerous items from various areas: Complete company clear-outs Company liquidations Fast, flexible, and efficient! We also clear out and/or dispose of goods for insolvency administrators. Send us a few keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: excellent (used), Year of construction: 2004, turning diameter 850 mm turning length 2200 mm Bwsdoyhrb Ujpfx Afmjp control Siemens 840 D

Condition: used, Reportedly unused GEA Niro Soavi model NS3006H homogeniser. Maximum flow rate 50 litre/hr with maximum pressure of 1500 bar. Unit includes pump and local controls. All mounted on stainless steel mobile frame. Bwodozinb Sjpfx Afmjp

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, total height: 3,067 mm, total width: 3,413 mm, table width: 800 mm, table length: 1,700 mm, table load: 1,500 kg, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, product length (max.): 4,270 mm, number of axes: 3, This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details. - Number of T-slots: 5- T-slot Width: 22 mm- T-slot Spacing: 135 mm- Spindle Nose to Table Surface Distance: 170-870 mm- Throat Depth: 800 mm- Spindle Speed Range: 60-8000 rpm- Spindle Taper: MAS BT 50- X-axis Rapid Feed Rate: 15000 mm/min- Y-axis Rapid Feed Rate: 15000 mm/min- Z-axis Rapid Feed Rate: 10000 mm/min- Working Feed Rate: 5-5000 mm/min- Tool Changer Capacity: 24 positions- Positioning Accuracy: ±0.01 mm / ±0.00039"- Repeatability Accuracy: ±0.005 mm / ±0.0002"- Main Drive Motor Power (continuous / 30 min): 15 / 18.5 kW (15 / 25 Hp)- Total Power: 18.5 kW- Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases Technical Specification Taper Size BT 50 Bodeziaggspfx Afmswp

Condition: used, Year of construction: 2011, functionality: unexamined, Equipment: documentation/manual, IRS Robotics® – Reliability as Standard KUKA KL 1500-3 7th Axis Robot Linear Rail – available in several lengths Includes our warranty. Inspected by our in-house robotics engineers. Brand: KUKA Type: KL 1500-3 Currently available lengths (while stocks last): Gross length = 5841 mm Gross length = 5856 mm Gross length = 5869 mm Gross length = 8369 mm Gross length = 12893 mm Bedpozh Hfyofx Afmowp Gross length = 13899 mm Optional: We can supply the robot with a KUKA robot. Complete with 7th axis drive unit, including the drive in the robot controller, motor, cable chain, grease pump, fully functional and ready to operate. Valid for the following KUKA robot types (availability on request): KR 30 to KR 125 KR 150 KR 200 KR 360 KR 500 About us: Our daily business is the reliable supply of refurbished A-brand robots: ABB – KUKA – ABB – YASKAWA. Established in 2002. We ship worldwide.

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t Bwodpfx Afswwlvlemop dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Bjdpoym Ih Usfx Afmowp

Condition: used, Year of construction: 2001, total length: 3,700 mm, total width: 1,650 mm, total height: 190 mm, Colour: White Empty weight: 3.300 kg Price: On request Bwsdpfxjzhuvge Afmjp - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 291/01 - Drive system: Teach-in - Control system type: Monforts Control System MTC K - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Bed width [mm]: 365 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Three-jaw chuck, Digital readout, Fixed steady, Quick-change tool post - Transport dimensions: 3700mm x 1650mm x 190mm (l x w x h) - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,500 kN, screw diameter: 45 mm, injection weight: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 358 cm³ • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450 °C • Max pressure: 190 bar • Max flow (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Availability: Mid 2026 Additional equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) • X-stroke: 550 mm Bedpfxjyyyn Us Afmewp • Y-stroke: 1200 mm • Z-stroke: 2000 mm • Weight: 300 kg

Condition: new, Year of construction: 2025, IMPACT 4in1 from stock Europe the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. Bwsdpfx Afou Nf Nzjmop we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 410798, type of input current: three-phase, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting machine designed for flexible and efficient production of shipping and protective packaging from continuous corrugated board – ideal for companies with a wide range of small batch series or on-demand production. Its patented multi-tool system allows for creasing, perforating, and cutting in a single pass, both longitudinally via the processing roller and transversely via the integrated cutting bar. 🎛 Processing & Tools 6× multifunction tools for longitudinal processing 1× multifunction tool for transversal processing Creases are applied gently using creasing skids – reduces carton cracking Perforation via oscillating cutting knife, intensity adjustable Bedjx Emgujpfx Afmjwp Cutting with a serrated knife on a rubberized roller → low-fiber, tactile cut edge ⚙ Drive & Mechanics Maintenance-free, high-dynamic linear drives for precise feed Segmented top pressure for reliable carton feed 2 rubberized rollers as counter-cut and transport medium 📐 Technical Specifications Max. working width: 1,500 mm Min. working length: 380 mm Board thickness: min. 1.5 mm (E-flute 1.3) max. 7.0 mm (BC-flute 2.7) Tool width: approx. 45 mm ➕ Carton Feed (Feed Stand) Max. stack height: 2,100 mm + 120 mm pallet Max. feed rate: 100 m/min Min. web width: 300 mm Max. web width (VPS 1500): 1,500 mm Total width "side by side": max. 1,350 mm 💻 Control & Software Hardware BECKHOFF industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) 16 GB RAM, 240 GB SSD Windows 10 IoT Enterprise 21" multi-touch panel Control cabinet integrated into base machine Software features Multi-stage cut optimization Dynamic tool management Bidirectional multi-line processing User management (user, service, admin, Kraft) Comprehensive production, carton, and design management Message statistics, manufacturer documentation, training videos, service portal, etc. Documentation Operating manual in local language Circuit diagrams in German or English Spare parts drawings Other Equipment Standard interface for barcode scanner, file import (XML), database import Control panel mounted on swing arm, left side 🔄 Setup Times & Performance Changeover time with automatic carton changer: approx. 4.5 seconds Tool repositioning only: approx. 2.5 seconds The machine is delivered with multiple FEFCO formats and is production-ready immediately (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Assembly, Transport & Year of Manufacture Demo and test machine year of manufacture 2019 Single-shift operation since 2022 Dismantling, packaging and delivery handled by seller Unloading requires 3.5-ton forklift with long forks 🎨 Colour Scheme Base machine: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) Safety fence: RAL 7015 Safety fence posts: RAL 7035 💡 Key Advantages of this Machine Very short setup times → ideal for flexible packaging production Low-fiber cut edges → reduced risk of injury & improved appearance Intuitive user interface Fully automatic, high-precision operation Immediately ready for use with included design templates Low-maintenance linear drives High process stability due to segmented top pressure

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DEMAG System 1500/1500-16000 Injection Moulding Machine Year of manufacture: 2008 We offer for sale a high-quality injection moulding machine from the German brand Demag, model System 1500/1500-16000, equipped with a robot and additional equipment. The machine is in very good technical condition, regularly serviced, complete, and ready for operation. TECHNICAL DATA Clamping unit: Clamping force: 15,000 kN Mounting platen dimensions (W x H): 2,150 x 1,880 mm Clearance between tie-bars (W x H): 1,500 x 1,250 mm Minimum / maximum mould height: 700 – 1,400 mm Maximum opening stroke: 2,900 mm Injection unit: Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (for PS): 9,880 g Injection pressure: 1,454 bar Electrical-hydraulic system: Hydraulic motor power: 165 kW Bedsww Idljpfx Afmowp Heater power: 97 kW Dimensions and weight: Machine weight with control cabinet: 74,000 kg / 21,000 kg Overall dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Additional equipment: Wittmann W 753 robot – year of manufacture: 2008 Safety enclosure Conveyor belt (product conveying) The machine is ideal for processing large technical mouldings. Perfect for serial production, with the possibility of full automation thanks to the installed robot and part removal system.

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Bwsdpfeyw Sv Esx Afmjp

Condition: used, Year of construction: 2019, operating hours: 14,857 h, machine/vehicle number: 150015, Travel ranges (X/Y/Z): 1,500 x 750 x 900 mm, 38-position tool changer, SK40, weight: 8,720 kg, control system: HEIDENHAIN TNC 640, 1 chip conveyor, 1 set of SK40 tool holders, approx. 60 pieces, on a transport cart. Bwjdpfszha Afsx Afmsp

Condition: new, Year of construction: 2026, functionality: fully functional, New HC-1500 Suspension Monorail Shot Blasting Machine Description: The HC-1500 suspension monorail shot blasting machine from ABRAZIV Kft. has been developed for the economical surface treatment of cast, forged, and welded parts as well as smaller steel structures. It is ideally suited for descaling, derusting, cleaning, and roughening a wide variety of workpieces. The machine is manufactured to order and can be individually configured according to customer requirements. The HC-1500 features a Y-shaped suspension monorail with two carriers, which enables continuous operation. While one carrier is in the shot blasting process, the second can already be loaded or unloaded. The machine is equipped with three high-performance ABR-400 shot blasting turbines, which are arranged at different angles. This ensures uniform and thorough cleaning of complex workpiece geometries. The internal surfaces of the shot blasting chamber are lined with highly wear-resistant manganese steel in the active shot blasting area. Other areas are protected by wear-resistant rubber, which also reduces noise levels. A closed shot blasting media circuit with a collection hopper, screw conveyor, bucket elevator, air separator, and dosing system ensures reliable and economical operation. A high-performance cartridge filter with a fan is included in the scope of supply for the extraction and filtration of dust generated during the shot blasting process. All functions of the machine are operated via a central control unit. In addition to automatic operation, a manual mode is also available for maintenance work. Technical data Workpiece dimensions Maximum workpiece height: 2,000 mm Maximum workpiece diameter: 1,500 mm Shot blasting turbines Number: 3 Type: ABR-400 Turbine diameter: 400 mm Speed: 2,400 rpm Shot blasting media flow rate: 180 kg/min Motor power per turbine: 11 kW Suspension monorail Load capacity per carrier: 500 kg Power consumption Machine power: 37 kW Cartridge filter: 7.5 kW Compressed air: 6 bar Compressed air consumption: 8 m³/h Other data Shot blasting media capacity: 1,800 kg Recommended shot blasting media grain size: 0.4–1.2 mm Extraction capacity: 6,000 m³/h Supply voltage: 3 × 400 V Control voltage: 220 V Bwsdezifcgspfx Afmjp Frequency: 50 Hz Optionally available: Electric hoist Extended suspension monorail Frequency inverter Automatic shot blasting media dosing Special coating Transport Installation Commissioning Operator training Spare parts supply Maintenance and service Application areas The HC-1500 is particularly suitable for: Cast and forged parts Welded structures Small steel structures Mechanical engineering Tank and apparatus construction Job-order shot blasting operations Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our suspension monorail shot blasting machines individually according to customer requirements. In addition to the HC-1500, other sizes and special designs are available. We will be happy to advise you on the design of the appropriate machine and provide you with a non-binding offer. Price on request

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm Bwodpfx Asxdfabsfmop

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 9725, SPECIFICATION Table size 1070 x 230mm Longitudinal traverse 660mm Cross traverse 250mm Bedoy Uuuxjpfx Afmowp Vertical traverse 380mm Quill travel 125mm Quill feeds 0.038 – 0.152mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50 – 3500rpm Approx. weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Newall Topaz 2 axis DRO system Low voltage halogen worklight Guarding Coolant system

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 60 mm, total length: 3,390 mm, total width: 1,480 mm, total height: 1,790 mm, workpiece weight (max.): 300 kg, overall weight: 2,800 kg, working height: 900 mm, input voltage: 400 V, warranty duration: 24 months, protection type (IP code): IP42, passage width: 1,500 mm, Equipment: double-sided, The SBM-L G1S2 EVO grinding and deburring machines were developed for deburring on both sides and edge rounding of workpieces in one operation. The LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts and stamped parts. The L series is equipped with three units each on the top and bottom. The processing of stainless steel, steel, aluminum or non-ferrous metal workpieces can be done either on the upper side, the lower side or on both sides. Bwedpsziar Asfx Afmop Two-sided sheet metal processing and edge rounding in one operation gives time savings of up to 60%. It is also possible to easily connect automation solutions or to integrate them into production lines. The machine concept ensures ergonomic operation and a pleasant working environment without pollution, dust and noise. working width max. 1000 / 1500 / 2000 mm workable material thickness - 0.5 - 60 mm load - 300 kg/rm voltage - 400 V / 50 Hz network structure - 3~ PEN / 3~ PE+N total current consumption - 43.7 A / 43.7 A / 43,7 A total power - 19.2 kW / 19.2 kW / 19.2 kW insulation class - IP 42 infinitely variable feed speed - 0-4 m/min. adjustment of material thickness - electric adjustment of tools - electric weight approx.2500 / 2800 /3200 kg dimensions (W/D/H ) approx 2890/1480/1790mm 3390/1480/1790mm 3890/1480/1790mm Double-sided deburring and edge rounding of punched, laser and plasma blanks More than 60% reduction in throughput time thanks to double-sided processing Up to 70% energy savings compared to conventional grinding/deburring machines LISA - The LISSMAC Set-Up Assist guides the operator automatically/without prior knowledge to the desired processing result 13.3" FullHD touch panel with intuitive operator guidance Simultaneous deburring and edge rounding on the external and exterior contours Double-sided processing eliminates costly material handling (e.g. turning of components) and time-consuming parts logistics One-sided machining possible by simply deactivating units (also for components that cannot be machined on conventional machines) Optimum tool utilisation across the entire working width due to transverse machining principle Quick and easy tool change within minutes with automatic reference run Maximum productivity with optimum and consistent machining quality Maximum productivity with optimum and consistent machining quality Small footprint due to compact design Modular and compact in modern machine design - smaller footprint Robust design and good accessibility reduce maintenance to a minimum Improved working environment due to reduced dust, dirt and noise levels