Used Sack & Kiesselbach Ep 630 for sale (4,114)

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. Nwodpfsyylhasx Afaef daylight: 320 mm width: 420 mm stroke: max. 310 mm weight: 3.700 Kg.

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm Njdpfx Afsgwv S Ujaowf stroke: max. 275 mm weight: 4.500 Kg.

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Nwsdjwxw Amopfx Afaof Mode of operation: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Nwodpfx Ajul U Svofasf Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm stroke: max. 355 mm weight: 9.000 Kg. Note: the press is been partly reconditioned by SACK & KIESSELBACH and the control system is been repalced. Nwsdpswuutbsfx Afajf

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: Nedowxw H Eopfx Afaewf SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: excellent (used), Year of construction: 1983, pressure 630 t diameter 320 mm stroke 310 mm weight of the machine ca. 3500 t Nwjdpfx Afsxvdr Hjajf

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Technical data: Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s Nwsdpfx Aegtty Tsfasf pressing speed 5,5 mm/s opening speed 120 mm/s table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Dimensions height 2900 mm width 3100 mm depth 1400 mm Drive power 8 KW Special equipment Digital measuring system Splines tool for internal splines

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Nwodshfwqzspfx Afaof Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Nwsdpfshtaaqox Afaof Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: M42L/8940, Offer Number: M42L/8940 Machinetype: hobbing press Make: SACK & KIESSELBACH Type: 1000 Constr. year: 1955 press power: 1000 to clear width: 585 mm daylight: 410 mm stroke: 380 mm Nwjdpswi Tdbjfx Afajf table size: 0/ 700 mm Location: In our warehouse

Condition: new, functionality: fully functional, Conveyor Belt EP 630/4 – 800 mm – 5+2 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following specifications: Width: 800 mm Type: EP 630/4 Polyester/Polyamide tension members Tensile strength: 630 N/mm 4 fabric plies Nwodjxy Nt Rspfx Afajf Cover plates: 5 mm top / 2 mm bottom Rubber quality: 15 MPa (standard industrial grade, abrasion-resistant) Material: PE/PA Condition: New / unused Length: 40 m Areas of Application Ideally suited for use in: - Quarries & gravel plants - Recycling facilities - Agriculture - General industry and conveying technology Benefits - High tear resistance - Durable covers - Good abrasion resistance - Suitable for medium to heavy-duty conveying tasks

Year of construction: 2011, condition: used, Compressor configuration: piston compressor Vessel capacity: 250 litres Pressure: 10 bar Intake capacity: 660 l/min Effective delivery rate: 410 l/min Motor speed: 1500 rpm Condensate drain: mechanical Weight approx.: 165 kg Power supply approx.: 400 Volt Storage location: Nwodpfx Afsy Ern Deajf

Year of construction: 1998, condition: used, Used machine Year of manufacture: 1998 Equipment and technical data: Nedjyyfkhepfx Afaowf - Max. operating overpressure: 10 bar - Compressed air tank: 250 l - Maximum sound pressure level: 76 dB(A) - Theoretical intake volume: 630 l/min - Effective delivery rate at 6 bar: 440 l/min - Number of cylinders: 2 - Speed: 1450 rpm - Oil quantity: 1.2 l - Oil refill quantity: 0.22 l - Motor: 3 kW / 400 V - Max. switching frequency: 20/h - Control: direct start Weight: 240 kg Availability: short-term Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 Nedjyfq Alopfx Afajwf • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Nwodpfxewypqre Afasf Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: good (used), Year of construction: 2006, Controll: NC4 Nsdpfx Afjrgw Exoaowf Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: used, Electric Forklift EP Model EFXZ-251 - Li-Ion Counterbalance Forklift, Electric Forklift Year of manufacture: Rated capacity: 2,500 kg Capacity at 500 mm load center: 2,500 kg Capacity at 600 mm load center: 2,270 kg Capacity at 700 mm load center: 2,080 kg Lift height: 4,800 mm Overall height: 2,200 mm (container-compatible) Mast height: 2,200 mm Free lift: approx. 1,500 mm Fork length: 1,150 mm Fork width: 120 mm Fork thickness: 40 mm Fork carriage width: 10 mm Operating voltage: 80 Volt - 4-wheel superelastic, solid rubber tires - front 7.00-12 / rear 6.00x9 Nedpfsx E Ay Dsx Afajwf - Hydraulic power steering - Triplex free lift mast - Integrated side shifter - Overhead guard - Drive battery Li-Ion, 80 Volt, 280 AH - Built-in automatic charger with 230 Volt mains connection - LED lighting front and rear - Safety LED warning zone light – BlueSpot - Operating hours according to hour meter: 9 hours - New technical inspection UVV (surcharge 150.00 EUR net) Length without forks: 2,600 mm Overall width: 1,160 mm Own weight with battery: 4,100 kg New – unused, year of manufacture

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low-lift pallet truck Load center: 600 Condition: New Technical Condition: New Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery capacity: 20Ah Battery manufacturer: Li-On Technology Battery type: Lithium-ion Battery year of manufacture: 2026 Battery condition: 80 - 100% Description: New machine, handed over with new FEM 4.004 inspection including inspection logbook and operating manual. For further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik. We also offer leasing & financing as well as delivery at favorable conditions, which we will be happy to arrange for you. Trade-in of Linde equipment is also possible — even if you do not purchase a machine from us. The operating hours indicated correspond to the date of entry. Subject to prior sale, changes, and errors. Njdpfx Afoy Hmwieajwf

Condition: excellent (used), CATALOG NUMBER 7915 TECHNICAL DATA cutter head width: 640mm number of knives: 4 pcs max thickness of processed element: 200mm – top: anti-kickback fingers/ejectors serrated infeed roller, powered pressure unit planing cutter head pressure unit smooth outfeed roller, powered – bottom: adjustable rollers in lower table: 2 pcs motor: 7kW variable feed speed control Njdpoyrrzpofx Afaowf Dimensions (LxWxH): 1800x1250x1150mm weight: 1250kg ADVANTAGES – Made in Bulgaria – Variable feed speed control – Used thickness planer in very good condition Net price: 9500 PLN Net price: 2260 EUR based on 4.2 EUR rate (Prices may vary with major fluctuations)

Condition: new, functionality: fully functional, machine/vehicle number: CPD15TVLNEU, Year of construction: 2025, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,430 mm, mast type: triplex, construction height: 2,140 mm, power: 10 kW (13.60 HP), fork carriage width: 1,040 mm, fork length: 920 mm, empty load weight: 2,950 kg, total length: 2,733 mm, drive type: Lithium-Ionen, construction width: 1,100 mm, Electric 3-wheel forklift Chassis number: CPD15TVLNEU Load center: 500 mm Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New device Technical condition: New Front tyres type: Solid rubber Front tyres condition: New Rear tyres type: Solid rubber Rear tyres condition: New Battery voltage: 80V Battery capacity: 150Ah Battery type: Lithium-ion Battery year: 2025 Battery condition: New Sideshift, 3rd valve, 4th valve, rear working light, front working light, roof cover, Nwjdjym Hiwjpfx Afaof

Condition: used, Year of construction: 2026, operating hours: 9 h, load capacity: 2,500 kg, lifting height: 4,800 mm, free lift: 1,655 mm, fuel type: electric, mast type: triplex, construction height: 2,220 mm, fork length: 1,150 mm, empty load weight: 1,040 kg, drive type: Elektro, construction width: 1,154 mm, Electric 4-wheel forklift Load centre: 500 Nsdsyl A S Espfx Afaswf ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 80V Battery capacity: 280Ah Front working lights, heating, full cab, safety light,

Condition: used, Year of construction: 2026, load capacity: 2,500 kg, lifting height: 6,500 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, drive type: Elektro, construction width: 1,154 mm, Electric 4-wheel forklift Nodeyl A Ugepfx Afaswf Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Front tyres type: superelastic Rear tyres type: superelastic Battery voltage: 80V Battery capacity: 280Ah Front work light, heater, full cabin, safety light,

Condition: used, Year of construction: 2026, operating hours: 37 h, load capacity: 10,000 kg, lifting height: 4,800 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 4 = 5,000 – 10,000 kg Mast type: Triplex Front tyre type: Superelastic Front tyre size: 9.00-20 white Nwodpfx Aeyl A Uajfaof Rear tyre type: Superelastic Rear tyre size: 9.00-20 white Battery voltage: 96V Battery manufacturer: EP Battery year of manufacture: 2026 Sideshift CanFB100T001G, no. CC10291 Rear work light, front work light, heater, load guard, full cabin, CE certificate, twin tyres, safety light,

Condition: used, Year of construction: 2026, operating hours: 5 h, load capacity: 5,500 kg, lifting height: 6,000 mm, free lift: 2,058 mm, fuel type: electric, mast type: triplex, construction height: 2,947 mm, fork length: 2,400 mm, drive type: Elektro, construction width: 1,495 mm, Electric 4-wheel forklift Njdsyl A T Njpfx Afaswf Load centre: 600 mm Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 309V Battery capacity: 173Ah Battery year: 2026 Cascade ZV 161745, opening 1380 mm Rear work lights, front work lights, heater, full cabin, air conditioning, safety light,