Used Saalasti Oy 48X36 for sale (348)

Condition: ready for operation (used), Year of construction: 1995, Heavy-duty rotor hog crusher. Bdedpfx Asx Sdw Rsmroh Materials that are processed include everything from wood wastes to eucalyptus bark The machine is equipped with 250 kW electrical motor. Production, particle size P100 mm , m³, loose vol/h : 135 ( max 170 ) Production, particle size P100 mm , t/h , fresh : 33 ( max 40 ) Infeed opening : 1514 x 695 mm

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Bodpfszp H R Esx Amrodh Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: good (used), functionality: fully functional, controller manufacturer: Fanuc, controller model: 16m, table width: 1,140 mm, table height: 1,220 mm, table load: 2,000 kg, overall weight: 22,000 kg, FOR SALE: Niigata HN80C – Horizontal Machining Center (HMC) Looking for a heavy-duty, reliable, and precise Japanese machining center for demanding work? For sale is a high-quality Niigata HN80C horizontal machining center, ready for production! General Information Manufacturer: Niigata Engineering Co., Ltd. (Japan) Model: HN80C Type: Horizontal Machining Center (HMC) Control System: Fanuc 16iM, Machine Weight:20,000 kg (20 tons) Axes and Performance X-axis Travel (longitudinal): 1,530 mm Y-axis Travel (vertical): 1,220 mm Z-axis Travel (cross): 1,140 mm B-axis / Table Indexing: Full 4th axis (0.001°) / 360-degree indexing Table and Pallet Changer Pallet Size: 800 x 800 mm Max. Pallet Load: 2,000 kg Pallet System: Automatic Pallet Changer (APC) Spindle and Tooling Spindle Taper: ISO 50 / BT 50 / CAT 50 Spindle Speed: 20 – 4,500 RPM Spindle Motor Power: 30 kW Tool Magazine (ATC) Highlights / Why Choose the Niigata HN80C? Heavy-Duty Construction: Built for demanding and heavy machining with excellent vibration damping and long-term stability. High Capacity: Large ISO 50 / BT 50 spindle taper enables heavy depth of cut and high power utilization. Bsdpoz H I Tmefx Amrjdh Generous Work Envelope: Large X/Y/Z-axis travels allow efficient machining of large workpieces in a single setup. Reliable Fanuc Control: Industry-standard control system ensuring operational reliability, easy programming, and broad spare parts availability. Contact us for more details, inspection, or a quote!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 1,000 kg, Equipment: CE marking, documentation/manual, For sale: Pilous ARG 290 CF-NC Automat automatic bandsaw Czech-made, fully automatic NC bandsaw for series cutting. The cutting length and piece count are programmed on the control panel; feeding, clamping, and cutting operate hydraulically in an automatic cycle. Stepless blade speed control is achieved via a frequency inverter. General Manufacturer: Pilous (TMJ), Czech Republic Model: ARG 290 CF-NC Automat Control: Unitronics Vision 230 Technical data Cutting capacity at 90°: round [290 mm], flat [approx. 290 x 290 mm] Miter cutting: [stepless 90°–45°] Blade size: [2,910 or 3,110] x 27 x 0.9 mm Blade speed: [15–90 m/min], stepless Main motor: [2.2 kW], 400 V / 50 Hz Length setting: NC-controlled, 0.1 mm accuracy, multiple feed for long pieces Hydraulic clamping, saw bow movement, and material feed Coolant system Weight: 1,000 kg Equipment Blade cleaning brush Bdodpfx Asz H Nc Asmroh Chip container Spare blade included

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 019006, For sale, removed from production: Bodpfx Amsz Hlznoredh Horizon Cross Folder AFC-546AKT Serial No. 019006 Estimated year of manufacture: 2004 Price includes packing and loading onto a truck.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, cutting length (max.): 3,300 mm, cutting width at rip fence: 1,650 mm, Equipment: scorer, Top of the line precision tablesaw with fully digital rip fence and crosscut fence. Packaged and ready for shipping! Bdjdpsxz Dl Refx Amrsh

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Bsdpfoz Hbm Tex Amrjdh Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: good (used), functionality: fully functional, workpiece weight (max.): 10,000 kg, turning diameter: 1,600 mm, workpiece diameter (max.): 1,800 mm, overall weight: 15,000 kg, grinding spindle motor power: 30 W, spindle diameter: 14,000 mm, FOR SALE: Heavy-Duty Sedin 1516 Vertical Turret Lathe – Retrofitted with Siemens Control! Are you looking for a reliable and efficient solution for machining heavy-duty components? Available now is a classic of Soviet manufacturing, the Sedin 1516 vertical turret lathe, upgraded to meet modern standards with a high-quality Siemens retrofit! Bedpfxsz E Nn As Amrjdh Technical Specifications (Sedin 1516): Manufacturer: Sedin (Krasnodar, USSR) Model: 1516 Table Diameter: 1,400 mm Max. Turning Diameter: 1,600 mm Max. Workpiece Height: 1,000 mm Max. Workpiece Weight: 5,000–10,000 kg (depending on exact configuration and condition) Main Motor Power: approx. 30 kW Machine Weight: approx. 18,000–19,200 kg Major Upgrade: Siemens Retrofit! The original control system of this machine has been replaced with a modern Siemens CNC control system, providing several key advantages: Enhanced Precision and Repeatability: Modern digital control ensures exact machining performance. User-Friendly Interface: Siemens controls are renowned for their logical and easy-to-use operator interface. Modern Features: Enables programming of more complex machining steps and tool paths. Extended Service Life and Maintainability: Siemens components are readily available and far easier to service compared to original vintage electronics. Condition and Additional Information: The machine has been in professional use and maintained regularly. The Siemens retrofit was completed in [add year], giving the machine a new lease on life. This is an excellent opportunity to acquire a heavy-duty, high-performance vertical turret lathe that combines Sedin's rugged mechanical durability with modern Siemens control technology.

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 670 mm, turning diameter: 490 mm, overall weight: 6,500 kg, FOR SALE: High-Quality CNC Lathe Biglia B 658 MB (Year of Manufacture 2004) with Driven Tools + KID 70 Bar Feeder Are you looking for a reliable and robust workhorse for metalworking? For sale is a Biglia B 658 MB CNC lathe in good and fully functional condition. The machine is equipped with driven tools, an automatic tailstock, a reliable Fanuc control, and includes an automatic bar feeder. The complete package is available ex stock. General Information Manufacturer: Biglia (Italy) Model: B 658 MB Year of manufacture: 2004 CNC control: FANUC Series 18i-TB Condition: Good, fully functional Availability: Ex stock --- Key Technical Characteristics (Lathe) Maximum turning diameter: 380 mm Maximum turning length: 650 mm Maximum rod/bar diameter: 80 mm Maximum passage: 620 mm Spindle speed range: 30–3000 rpm Spindle drive power: 26/22 kW Spindle end: ASA 8″ Spindle bore diameter: 90 mm Diameter of the lathe chuck: 315 mm Bidirectional turret: 12 positions Turret indexing time (per position): 0.1 s Driven tool stations: 12 positions Max. speed of driven tool stations: 4000 rpm Max. torque of driven tool stations: 3.7 kW Feed in the X/Z/B axis: 220 / 650 / 660 mm Rapid traverse in the X/Z/B axis: 20 / 24 / 12 m/min Automatic tailstock maximum clamping force: 1080 Kg --- Round bar diameter: min. 5 mm (3/16") – max. 70 mm (2" 3/4) Square bar side: min. 5 mm (3/16") – max. 50 mm (2") Hexagonal bar height: min. 5 mm (3/16") – max. 60 mm (2 1/4") Maximum bar length options: 500 mm / 1615 mm Magazine capacity: 250 kg (e.g., approx. 60 bars of 10 mm) Bar change time: 50 sec (with a 1000 mm bar) Feed speed: 0–500 mm/sec Return speed: 1000 mm/sec Supply voltage: 230/400 Volt Control voltage: 24 Volt Installed power: 2 kW Weight: 580 kg Additional Equipment & Features KID 70 Bar feeder Measuring arm (Touch setter) Chip conveyor Collet chuck DIN 6343 Coolant tank capacity: 250 liters Coolant pump capacity: 150 l/min Coolant pump power: 0.73 kW Noise level: 74 dB(A) Physical Dimensions (Lathe) Dimensions (L x W x H): 4000 x 1900 x 1850 mm Weight of the Biglia B658/BM: approx. 6,000 kg Bdedezbx N Eopfx Amreh Contact us today to request a quote for this complete production package! The machines are ready for immediate dispatch. > *(All information is given in good faith but we reserve the right to make errors)*

Condition: good (used), Year of construction: 2003, operating hours: 25,000 h, functionality: fully functional, type of input current: three-phase, overall weight: 13,000 kg, FOR SALE: Finn-Power F5 S Turret Punch Press Available for purchase is a high-quality, Finnish-made Finn-Power F5 S turret punch press. Manufactured by the renowned Lillbacka Corporation, this machine offers robust performance and precision for demanding sheet metal fabrication. Technical Specifications: Machine Type: Finn-Power F5 S Manufacturer: Lillbacka Corporation, Finland Bjdjy Iwmwspfx Amrsdh Manufacturing Year: 2003 Punching Force: 300 kN Max. Working Pressure: 300 bar Machine Weight: 13,500 kg Key Features: CE Certified: Fully compliant with European safety and quality standards. Heavy-Duty Build: The 13.5-ton machine weight ensures excellent stability and vibration damping for high-precision work. Proven Reliability: Built with industry-leading technology and patented Finnish engineering.

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Voltage: 380 V Bodjzvvc Depfx Amrodh Phases: 3 Ph Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 681852N, total length: 2,200 mm, total width: 1,450 mm, total height: 1,550 mm, Size: 360 x 520 mm Availability: in stock Total impressions: 49.7 million Estimated model year: 1983 Status: discontinued in 2025 Maximum sheet size: 360 x 520 mm Minimum sheet size: 105 x 180 mm Maximum speed: 8,000 sheets/hour Bdedez D Ernjpfx Amreh Printing units: 2 Total weight: 2,850 kg Includes: 2 x Varn Kompac III, automatic, continuous dampening system Eltek elektrostat P22

Condition: excellent (used), Year of construction: 2011, operating hours: 1,200 h, functionality: fully functional, overall weight: 1,800 kg, machine base height: 1,400 mm, Equipment: documentation/manual, Very good condition and low hours. KAMA Profold is a flexible folder gluer for folding cartons with straight-line or crash-lock bottom. ProFold 74 folds and glues blanks into a multi­tude of print products auto­mat­ic­ally and cost-effi­ciently! Whether present­a­tion folders, folded cards, ship­ping envel­opes, ticket pockets, cross folders and advent calen­dars or orders from the field of pack­aging, such as folding cartons with straight-line or crash-lock bottom. Produce all these products in-house on the ProFold 74, benefit from shorter delivery times and extend your margins! OPTIONS INCLUDED: -Device for crash lock bottom(automatic) boxes, K70513 -Addition Crash lock kit: 2 devices, 3 x rolls, 2 x 6 rolls, 6 clamps K70514 -Baumer HHS: 1 nozzle incl. hose, plus mounting bars K70601 - Spending/placing device - 4pcs. 1 unit down hold devices -1pc. Small folding knife left Bedpjzzdcvsfx Amrodh -1pc. Cross beam Addition Crash lock kit: 2 devices Technical specs: Max sheet size 740x740mm Min: 100x120mm Max speed: 150m/min Paper and cardboard 100-600g/m2

Condition: good (used), functionality: fully functional, For sale: a log feeding line with a turner (Interlog AB). Bdsdpoz Az Awefx Amrsh The complete line includes: Log feeding conveyor, length 43 meters Metal detector Log conveyor Log turning device Log dropping conveyor Hydraulic unit and hydraulics All existing electrical and electronic equipment belonging to the line The line has been dismantled and packed into transport packages (a total of 3 loads). The individual components can also be sold separately. The line is located in Sweden. Please contact us, and we will gladly answer your questions and provide you with a good offer!

Condition: used, functionality: fully functional, Omron SGDH-20DE-OY - Servo Driver Bdedpfoy Swlbox Amroh

Condition: like new (used), Year of construction: 2005, functionality: fully functional, Müller Martini Corona, (~2005), complete clamping unit, for a machine with a maximum speed of 18,000 units/hour. - Part numbers: 3010 1011 9 and 3010 1013.9 The entire clamping unit is available for sale as a spare part. Bedpfx Amsz Au I Eerodh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 350 mm, total length: 15,000 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: rotational speed infinitely variable, FOR SALE: Kaltenbach KBS 400 DG + NA 400 – Automatic Band Saw Line Bdsdpfjy Rvfwox Amrsh High-quality German engineering tailored for professional structural steel fabrication. This Kaltenbach sawing line is engineered for high-volume production, delivering exceptional precision and a high degree of automation. The Package Includes: Kaltenbach KBS 400 DG: Semi-automatic band saw with double-sided mitre cutting capability. Kaltenbach NA 400: NC-controlled material feed system (push-type) enabling fully automatic series cutting. Roller Conveyors: Heavy-duty infeed and outfeed roller tables. Technical Specifications: Manufacturer: Kaltenbach GmbH + Co. KG, Germany Model: KBS 400 Year of Manufacture: 2008 Voltage: 400 V / 50 Hz Main Fuse: 35 A (Total current: 25 A) Control Voltage: 24 V DC / AC Key Features: Double Mitre (DG): Saw frame swivels in both directions, allowing precise angle cuts without the need to turn the workpiece. NC-Controlled Feeding: The NA 400 offers precise length measurements and automated feeding, increasing productivity and minimizing operator errors. Reliability: Kaltenbach machines are renowned worldwide for their robust frames and durable hydraulic systems. Condition: Well-maintained industrial equipment, immediately ready for operation. This setup is the ideal solution for steel fabricators seeking to automate profile cutting with proven, industry-standard technology.

Year of construction: 2019, condition: ready for operation (used), A belt washing machine is available for pre-washing and feeding food into downstream machines. Input height: 1000mm, output height: 1000mm, machine dimensions X/Y/Z: approx. 4600mm/1500mm/1500mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Bdedpeu Tiyvjfx Amrsh

Condition: good (used), Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, coolant pump power: 150 W, grinding spindle motor power: 1,500 W, overall weight: 510 kg, grinding wheel diameter: 230 mm, For sale: Wadkin copy sanding machine in tidy condition with a wide working capacity. Bdjdpeyk S U Tefx Amrjh

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: FAF19SCULPTOR, grinding spindle motor power: 1,500 W, input current: 4 A, The Schneeberger Sculptor is a Swiss high-precision profile grinding machine, specifically designed for the sharpening and manufacturing of tools. The machine is fully operational and available for testing. It comes with a comprehensive set of accessories and parts. Bsdpfx Aoyk S Rnemrjdh

Condition: good (used), Year of construction: 2004, operating hours: 4,900 h, functionality: fully functional, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,500 rpm, Gildemeister GMX 200 Linear (2004) KUKA KR 150-2 Robot (2004) Automated Mill-Turn Production Cell For sale: High-performance automated machining cell comprising a Gildemeister GMX 200 Linear mill-turn center and a KUKA KR 150-2 industrial robot. The system is engineered for efficient, flexible, and unmanned production operations. CNC Lathe / Mill-Turn Center Gildemeister GMX 200 Linear – Technical Specifications General Manufacturer: Gildemeister Model: GMX 200 Linear Year of manufacture: 2004 Machine type: CNC mill-turn center Control system: Siemens Sinumerik 840D Drive technology: Linear motors on X, Y, and Z axes Turning Maximum turning diameter: 560 mm Turning diameter over cross slide: 400 mm Maximum turning length: 1,070 mm Bar capacity: 65 mm Axes and Travels X-axis travel: 485 mm Y-axis travel: 160 mm Z-axis travel: 1,070 mm B-axis swivel range: ±110° Main Spindle Spindle speed: 5,000 rpm Spindle power: 37 kW Tool interface: HSK-A63 Milling Milling spindle speed: 12,000 rpm Tool holder: HSK-A63 Tool System Number of tool positions: 48 Automatic tool changer Equipment Y-axis B-axis milling unit Linear motor technology Chip conveyor Central coolant system Full CNC integration for robotic automation Industrial Robot KUKA KR 150-2 – Technical Specifications General Manufacturer: KUKA Model: KR 150-2 Robot type: 6-axis industrial robot Year of manufacture: 2004 Application: Part handling / automation Load and Reach Maximum payload: 150 kg Maximum reach: 2,700 mm Axes Number of axes: 6 Axis Motion range A1 ±185° A2 −155° / +35° A3 −120° / +158° A4 ±350° A5 ±125° A6 ±350° Bodsx Iflhjpfx Amrsdh Axis Speeds A1: 120 °/s A2: 110 °/s A3: 110 °/s A4: 190 °/s A5: 180 °/s A6: 260 °/s Accuracy Repeatability: ±0.2 mm Controller and Electrical Controller: KUKA KRC2 Power supply: 3 × 400 V / 50 Hz Installation Mounting: Floor-mounted Installation position: Freely programmable Itsbmtox Iflhj Dty Aoc Weight Robot weight: 1,245 kg Production Cell Advantages - Turning and milling in a single setup - Automated part loading and unloading - Suitable for serial production and unmanned operation - High precision and productivity - Ideal for CNC job shops and industrial manufacturing 📍 Location: Finland 🚚 Delivery: Transportation can be arranged 📄 Condition: Used ℹ️ Note: Technical specifications to be verified with the seller prior to purchase.

Year of construction: 2018, condition: good (used), functionality: fully functional, FOR SALE: KIGO CPT-1C-3S Chemical Pre-treatment & Spray Washing Chamber For sale is a high-quality, versatile industrial chemical spray washing chamber manufactured by KIGO in 2018 (Model CPT-1C-3S). Designed for cleaning, degreasing, and surface pre-treatment of metal parts prior to coating/painting. The system handles both lighter workpieces via an overhead conveyor and heavier parts via a floor wagon. Key Features & Capabilities: 3-Stage Treatment Process: Stage 1: Degreasing (heated spray, max 50 °C, 50 kW plate heat exchanger) Stage 2: First Rinsing (heated spray, max 50 °C, 50 kW plate heat exchanger) Stage 3: Second Rinsing (ambient temperature) Flexible Workpiece Dimensions: Lighter Parts (Overhead Track): Max dimensions: 2,500 x 1,200 x 2,000 mm (L x W x H) Max load capacity: 300 kg Heavier Parts (Floor Wagon): Max dimensions: 1,500 x 1,000 x 1,000 mm (L x W x H) Max load capacity: 1,500 kg Automatic Distribution Wagon: Positioned beneath the chamber floor to automatically direct runoff back to the correct tank, preventing liquid cross-contamination. Bdsdpfx Aozz I Trsmroh Pneumatic Doors: Air-operated doors seal the chamber tightly during spray cycles. Heavy-Duty Construction: Tanks and floor made of AISI 304 L stainless steel. Structural frame built with epoxy-painted steel profiles and 50 mm polyurethane insulated panels. Technical Specifications: Manufacturer: KIGO O.E. Model: CPT-1C-3S (Serial Number: 0304-29-FL/PP) Year of Manufacture: 2018 External Dimensions: 7,348 x 3,758 x 4,334 mm (L x W x H) Internal Chamber Dimensions: 3,300 x 1,900 x 2,585 mm (L x W x H) Tank Capacity: 3 x 1,000 liters Pumps: Ebara centrifugal pumps (3 units, 5.5 kW) & Lowara pumps (2 units) Exhaust Fan: Stainless steel vapor extraction fan, 5,000 m³/h capacity (1.5 kW motor) Control System: Central electrical control panel with touch screen interface (ECP-PT07), adjustable spray/drip-off cycle times, automatic refilling, and level sensors. Condition & Documentation: Professional-grade industrial unit built for easy maintenance. Includes complete operation and maintenance manuals along with pneumatic/electrical schematics.

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,500 mm, turning diameter: 720 mm, travel distance X-axis: 800 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 30,000 W, total height: 2,500 mm, total length: 5,000 mm, total width: 3,000 mm, workpiece weight (max.): 1,500 kg, type of input current: three-phase, overall weight: 16,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Integrex 50 YB × 1500 – CNC Multi-Tasking Machine Heavy-duty, versatile CNC turn-mill center with live tooling, B-axis, Y-axis, and a large chain tool magazine. Well-suited for demanding high-precision machining with heavy workpiece loads. Key highlights: Large capacity: 1,500 mm between centers, 710 mm swing over bed Heavy workpiece capacity: up to 1,500 kg shaft work / 400 kg chuck work Full multi-tasking axes: C-axis (0.001°), B-axis swivel (210°, 0.001° indexing), Y-axis (±105 mm) High tool capacity: chain magazine for 90 milling / 30 turning tools (ISO 50 CAT taper) Capacity & dimensions: Max swing over bed: 710 mm Bdodpfx Ajzugfyjmrsh Max swing over cross slide: 520 mm Swing range depending on Y-axis position: 310–710 mm Distance between centers: 1,500 mm Max workpiece weight (incl. chuck): 400 kg chuck work / 1,500 kg shaft work Machine weight: 14,500 kg Main spindle & C-axis: Spindle speed: 5–3,000 rpm (stepless, 4 speed ranges) Main motor (AC): 30 kW (30 min) / 22 kW (continuous) Max torque: 314 kpm (approx. 3,080 Nm) C-axis indexing: 0.001° Turret, axis travels & rapid traverse: Turret swivel (B-axis): 210°, indexing 0.001° Travels: X 680 mm · Z 1,612 mm · Y ±105 mm Rapid traverse: X 12 m/min · Z 15 m/min · Y 10 m/min Z-axis feed force: 2,840 kp max (approx. 27.9 kN) / 1,150 kp continuous (approx. 11.3 kN) Tool shank: OD turning 25 × 25 × 150 mm / boring bar Ø50 mm Milling spindle & live tooling: Speed range: 18–6,000 rpm Milling motor (AC): 15 kW (30 min) Tool taper: ISO 50 CAT Automatic tool changer (ATC): Type: chain magazine Capacity: 90 milling tools / 30 turning tools Max tool diameter: 120 mm Max tool length: 460 mm Turning tool length (using B-axis): 165 mm Max tool weight: 20 kg Tailstock: Type: programmable quill and body Quill travel: 130 mm Quill diameter: 130 mm Quill taper: MT 5 (MK 5) Max clamping force: 1,500 kp (approx. 14.7 kN)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, Decommissioned 07.2026 as unnecessary Bdedpoznk Rmjfx Amrjh

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 230655, control type: NC control, actuation type: hydraulic, roller (top) diameter: 320 mm, side roll diameter: 240 mm, sheet thickness (max.): 25 mm, overall weight: 10,500 kg, total length: 4,350 mm, total width: 1,800 mm, total height: 1,950 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, Key Technical SpecificationsWorking Length: 2050 mm Upper Roll Diameter: 320 mm Lower/Side Roll Diameter: 240 mm Bending/Rolling Capacity: Designed to handle steel plates up to 25 mm (rolling) and pre-bend up to 20 mm. Working Speed: 1.5 to 5 meters per minute. Main Features 4-Roll Design: Allows full circle and varying radius rolling with precise edge pre-bending in a single pass. Linear Guide System: Directs hydraulic piston power straight to the material for higher bending accuracy. Bdjdpfszzn A Tox Amroh Application Suitability: Ideal for medium to heavy metal fabrication, cylindrical ferrules, and stainless steel processing. Optional: NC-control, Hydraulic Overhead Crane (Lift) 2,5m