Used Runfeng Spiral Cooling Tower for sale (8,512)

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Bodpfx Adsyvrvpsrjli Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: good (used), Large throughput cooling spiral. 28 tiers, 880mm belt. Approx 550m belt. Was used as spiral freezer to freeze over 3 tonnes per hour of fried McD chicken burgers. Bsdpfex Hbhcox Adrjli

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, Due to a rescheduling of a site visit, the auction end date has been postponed to Thursday, June 25, 2026! The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approximately 60g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump system Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel wire belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Blodozardtopfx Adrji Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface area: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heater: 4 x 0.72 kW Defrosting interval: sequential Heater in the pan: hot gas Control and switch cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration unit: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switch cabinet: stainless steel on a stainless steel frame Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm light: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency converter SEW overdrive with Danfoss frequency converter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel frame Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drainage Under-freezing protection heater with a reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator pipes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the unit Sequent

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. Bodpoynkbmofx Adreli The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Year of construction: 2022, condition: like new (used), functionality: fully functional, Description: JACIR Water Cooling Tower RXH-6029-84-N245-370-BR Characteristics: Thermal power: 4610 kW Incoming temperature: 43 °C Outgoing temperature: 30 °C dBa (20 m): 55 Bodpsvzw H Eofx Adroli Max. H2O flow: 305 m3/hour

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm External diameter 2.250 mm Length conveyor belt 48 m Equipment Bsdpfxod Ert So Adreli • drying tower downward • infeed left at the top

Year of construction: 2019, condition: ready for operation (used), An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible. Bledpfx Adov E Ragorei

Year of construction: 2002, condition: ready for operation (used), Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Bedpoui R Smsfx Adreli

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Temperatures: -6.7 °C/+35 °C. Speed: 2,950 rpm Bledpfx Adoxz Ex Seroi Refrigerant type: R507. Feel free to contact us for more information!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: RAD 864/900 - AB49038, cooling capacity: 1,113 kW (1,513.26 HP), type of input current: three-phase, type of cooling: water, overall weight: 8,449 kg, input voltage: 400 V, pressure: 6 bar, temperature: 21 °C, volume flow: 192 m³/h, pump pressure: 3.27 bar, total width: 2,124 mm, total length: 6,600 mm, total height: 3,180 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process Cooling Tower, air-cooled Type: Cooling Tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD units are complete compact water cooling towers suitable for outdoor installation. Includes pump, water treatment system for biocide and stabilizer, and control and switch cabinet. Cooling capacity kW: 1113 Chilled water temperature outlet/inlet °C: 27 / 32 Flow rate m³/h: 192 Available pump pressure Bar: 3.27 Blodpfx Adjwmb T Ejroi Wet bulb temperature °C: 21 Air flow rate m³/h: 97,200 Sound pressure at 10m (free field) dB(A): 64 Electrical data: Voltage V: 400, Frequency Hz: 50, Phases: 3 Max. current consumption (A): 125 Max. power consumption (kW): 86.6 Dimensions: Length mm: 6,600, Width mm: 2,424, Height mm: 3,180 Weight (transport/operating) kg: 4,194 / 8,449 Connection DN 150 Reference: AB 9038 Year of manufacture: 2024 Condition: Visual 1, Technically OK & tested Test facility, as new Price: on request in Euro (plus VAT ex works Nettetal) – 12 months warranty (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau

Condition: like new (used), Perfect for bread cooling/freezing because of the big tier pitch Full Specs and price on request 610mm wide belt (Choice - stainless or plastic) fully stainless steel frame New plastics Blsdpfsycvplex Adrji Brand new gearbox

Condition: used, Type ICS/C 1.6-838-2x8/115 Model: North - West spiral belt with 2 x 8 tiers nett belt width ± 830 mm product height: max. ± 150 mm Capacity: ± 1.000 kg/hr at 90min Siemens control Belt washing and drying system Additional in- and out-feed conveyor belts: 2-track Dimensions (l x w x h) : ± 10.300 x 4.660 x 2.780 mm Bledpfszfga Sox Adrei yoc 2011 3 x 400V, 50 Hz, 160A

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, total length: 13,000 mm, total width: 5,650 mm, total height: 3,300 mm, input current: 10 A, input frequency: 50 Hz, Industrial Spiral Bread Cooler An industrial spiral bread cooler is available, suitable for bakeries and production lines. The machine was in operation until recently and has been dismantled due to replacement with new equipment. The spiral has a total length of approximately 420 meters and ensures uniform cooling of the products. The dwell time for a complete cycle is approximately 94 minutes, enabling an efficient cooling process after baking. The system has a throughput of around 2,500 loaves per hour and can simultaneously accommodate up to 4,000 loaves with a total weight of approximately 2,566 kg. The design allows for configuration as a single or dual spiral (figure-eight type), depending on production requirements. It is suitable for integration into existing bread and bakery product lines. Main specifications: - Outer diameter: approx. 5.65 m (per loop) - Height: approx. 3.30 m Bsdpfx Adey Au Inerjli - Required floor space: approx. 12–13 m in length (depending on configuration) - Power supply: 400V AC / 24V DC - Rated current: 10 A Manufacturer: QUBA 3 s.r.l. (Italy), line by MEFOOD Solutions Model: QC020118 The machine is sold dismantled. All components are available. It was fully operational until dismantling and is in good technical condition. On-site inspection is possible by appointment. Additional information can be provided upon request.

Condition: good (used), Spiral Cooler with Refrigerated Chiller Room In good working condition Chiller Room dimensions 5.4mtr x 4mtr Spiral Cooler Bodpfxjn Tmh Se Adroli 660mm wide wire mesh belt 13 floors high, 170mm high between floors Complete with refrigeration compressor. In use at present

Condition: used, Year of construction: 2009, functionality: fully functional, total length: 7,700 mm, total width: 5,300 mm, total height: 6,000 mm, warranty duration: 3 months, overall weight: 10,000 kg, input voltage: 415 V, type of input current: three-phase, power: 12 kW (16.32 HP), year of last overhaul: 2025, control cabinet height: 1,800 mm, control cabinet width: 1,200 mm, control cabinet length: 350 mm, product height (max.): 97 mm, conveyor belt width: 630 mm, temperature: -35 °C, cooling capacity: 300 kW (407.89 HP), Equipment: documentation/manual, 2No. Heinen Spiral freezers. Used to freeze ready meals from +7°C to 18°C Approximately 2500Kg per hour Bodpfjwt Rdmjx Adrsli Max product gap - 97mm Belt width - 630mm Belt type - Omniflex No. of tiers - 32 per spiral Approx. dimensions - 7.7m (L) x 5.3m (W) x 6m (H) Photos & full specification to follow. Also available 1No. Complete ammonia plant with 2No. Sabroe compressors. Will sell separately.

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp Bjdpfx Aorfclqedreli

Condition: new, Generally overhauled machine Price: 6.000EUR Spiral mixer Capacity: 75 kg flour Bsdpsx N Edtjfx Adreli Kemper Dough capacity: 120 kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Condition: like new (used), Generally overhauled Price: 5.500EUR Bjdpjx N Ed Tefx Adrsli Spiral dough mixer Capacity: 100 kg of flour 160/180 kg of dough Diosna Container volume: 260 liters Electrical power: 380V / 50Hz / 3N/PE Two timers Two speeds Rewind option Half cover with safety switch Wheels with brakes

Condition: new, PRICE: 1900 EUR Spiral dough mixer Container capacity (capacity): 60 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) They have a digital control panel with a display, two independent electric motors with two speeds and counter directions that move the vessel and the spiral, as well as a built-in timer Specification of Spiral Mixer single phase Bljdpfxex U Efbo Adrsi Bowl Capacity: 60 liters Electric Power: 3kW Machine Size: 840x480x1000mm

Condition: new, Generally overhauled machine Price: 5.000EUR Spiral mixer Capacity: 75 kg flour Bledpfxjx N Edme Adrei Kemper Dough capacity: 120kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Condition: ready for operation (used), ef cooling LOK 30 air-oil cooler SN:0030, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bljdpfx Adeul In Rjrji

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0430.020 / 21143, type of input current: three-phase, power: 22.3 kW (30.32 HP), input current: 42 A, We are offering a refrigeration unit from ef cooling. This unit was used to cool a Bystronic laser cutting machine. Regular maintenance was always performed. Bodpfx Adszdytiorsli The unit can also be used as a source of spare parts, so individual parts can also be purchased. We have another identical unit in stock, so two of this type can be purchased.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete Blsdsyb Sdijpfx Adroi YOM 1991 Made in Germany Good working condition

Condition: good (used), Cooling compressor Stal KTK 207 Bsdoyb Rqujpfx Adrjli 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Bsdpfxjyf Hlio Adroli Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework