Used Rotox Rotox Pvc Production Line for sale (24,218)

Year of construction: 2006, condition: used, We are selling a PVC production line consisting of the following equipment: ROTOX: ZGS314 - double-head miter saw AS1960 - automatic reinforcement screwing machine FWS381 - automatic three-spindle water slot/drain slot milling machine SAF166 - automatic/pneumatic end milling machine KF349 - four-spindle copy router SZK502 - double-head welding machine EPA470 - corner cleaning machine FMS643 - sash assembly station SEK701 - single-head automatic welding machine LA396 - electronic length stop system GLA403 - glazing bead saw, simultaneous cutting of two PVC window frame glazing beads at a exact 45-degree angle BLACKSEA TS3067 - triple-spindle water slot (drainage) milling machine Gbedpfxez Hw Erj Akyeu

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Production line units: Gbedpfx Aksy Exrpjyeu 1. Zhejiang Baina 150 20D 1000Kg/h cold feed vacuum extruder (Standard) 2. Zhejiang Baina EJ-PPF-150-04-00 conical die (Pneumatic) 3. Zhejiang Baina 6m infrared curing oven (width 1000mm) 4. Zhejiang Baina 6m hot air curing oven (width 1140mm) 5. Zhejiang Baina 6m hot air curing oven (width 1440mm) 6. Zhejiang Baina 6m hot air curing oven (width 1600mm) 7. Zhejiang Baina 6m hot air curing oven (width 1800mm) 8. Zhejiang Baina 6m hot air curing oven (width 2000mm) 9. Zhejiang Baina 6m hot air curing oven (width 2300mm) 10. Zhejiang Baina 6m hot air curing oven (width 2500mm) 11. Zhejiang Baina 6m hot air curing oven (width 2800mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 layers * 12m) cooling system 13. PCM automatic longitudinal and transverse industrial cutting machine 2000mm 14. AC-15AD liquid chiller with 285 liters water tank If you are interested, we will send you a detailed description and data.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 Gsdsz Dt Spspfx Akyjbu YOC 2017 PORTAL STACKER BIELE Serial A6213-24 YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer Gbsdpfez Rnu Tjx Akyou • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, The VEMAG sausage production line is a complete set of three cooperating VEMAG machines: the HP30E vacuum filler (2012), the LPG 208 length-portioning linker (2014), and the AH212 hanging machine (2016). The set covers the entire process from filling the casing, through portioning and linking sausages into lengths of a set size, to automatic hanging on smoke sticks, enabling efficient and repeatable production in medium and large meat plants. How does the VEMAG sausage production line work? Key advantages of the VEMAG sausage production line Vacuum operation ensures a compact, uniform stuffing without air pockets, improving the appearance, color, and shelf life of finished sausages. The LPG 208 linker allows cooked, fresh, and dry sausages to be produced on one machine, using natural, collagen, cellulose, and polyamide casings, and its automatic casing pusher shortens changeover times. Interchangeable dividing belts with quick-release catches can be changed in under 1 minute, and the linking speed can be set separately for each casing type. Gentle handling protects casings, including overlapped ones, and the hygienic design allows low-pressure cleaning. The AH212 hanging machine allows any hanging pattern (individually, in pairs, in threes, in fours, etc.) and ensures ergonomic work, reducing operator physical strain. All three units come from a single manufacturer and are designed to work together, which simplifies control, operation, and servicing of the entire line. Technical specifications of the VEMAG sausage production line Gbodpfx Akoz N A Nisysu VEMAG HP30E vacuum filler (Filler) Manufacturer: VEMAG Model: HP30E Year of manufacture: 2012 Filling capacity: up to 8,700 kg/h Portion weight: 5 g to 99,999 g Air consumption: approx. 40 l/min Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Capacity: 350 l VEMAG LPG 208 length-portioning linker (Linker) Manufacturer: VEMAG Model: LPG 208 Serial number: 2080470 Year of manufacture: 2014 Power supply: 400–460 V, 3~, 50/60 Hz Rated current: 7 A Power: 4.5 kW SCCR: 5 kA rms Weight: 517 kg Caliber range: approx. 13–40 mm and more Filling rate: from approx. 300 to 4,400 kg/h (depending on casing type and caliber) Linking head: twin, casing change in under 2 s Dividing belt changeover: under 1 min VEMAG AH212 hanging machine (Hanging Machine) Manufacturer: VEMAG Model: AH212 Serial number: 2120444 Year of manufacture: 2016 Power supply: 400–460 V, 3~, 50/60 Hz Power: 0.5 kW SCCR: 5 kA rms Weight: 298 kg

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Gedeywkc Rjpfx Akysbu Machine in working condition. 7) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 8) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 9) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 10) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 11) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, König Combiline KCL 6 / 800 mm with WK-RR and Donut station – 2022 Automatic König Combiline line for the production of small breads and shaped products, equipped with a Classic Rex Futura, a WK-RR shaping station, and an original König Donut station. Features: – Manufacturer: König – Model: Combiline KCL 6 – Year: 2022 – Working width: 800 mm – Dividing and rounding head: Classic Rex Futura – Type: Futura T5/4/3S – Drums: SK51 + SK65 – Weight range: 22 to 115 g – Operation in 3 / 4 / 5 rows – Maximum capacity: up to 7,500 pieces/hour – Control via touchscreen with programmable settings Line composition: – König Classic Rex Futura, divider-rounder – Pre-elongator – Proving chamber / pre-fermentation – Shaping station with WK-RR coiler – Moistening and seeding system – Automatic depositing system – Donut cutting / stamping station The WK-RR station allows, in particular, the processing of elongated and coiled products and significantly increases the versatility of the line. The Combiline enables the production of a wide range of products: – Round small breads Gsdpez I U Tcefx Akyjbu – Hamburger buns – Hot dog buns – Elongated small breads – Flattened products – Coiled products – Various shaped products – Donuts König Donut station: – Width: 800 mm – Bottom-side center cutting – Centering device for precise cutting – Automatic removal of cut dough – Stainless steel construction Condition: Line in very good condition and always well-maintained. It is currently still installed in a bakery in the UK and can be viewed before dismantling. Dismantling is scheduled soon, and the line will then be available in our warehouse in Belgium. Video available upon request.

Condition: excellent (used), Year of construction: 1992, Complete production line Omag Tronic 140/120 Gbjdsz Ngzispfx Akyeu - Siemens S5 - elevator - lowerator - finger car - cuber - foiling device Messersi 2011 - washing device Schindler 2007 - 15 moulds - 3000 production boards 1400/1150 - double mixing plant Skako 2250l + 750l with skips, cement weights, flying bucket, color mix

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: Gbedpfx Aszp Nz Tjkyou EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The Mécan'Outil TGV/S automated production line is designed for the assembly of roller shutter casings made from PVC and aluminum profiles. The machine was delivered to a production facility in 2021. The unit is in very good technical and visual condition, making it an excellent investment for companies involved in the production of roller shutter systems. Gbodpfx Aez E Nzcskyju Price: 85,000 EUR (negotiable) Detailed technical specifications are available in the attachments. Please contact us for further information and to arrange a viewing of the machine. This is a fully equipped production line that can quickly begin operation in a new facility. Highly recommended.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2025, For sale: Welding and deburring line with a turning table for PVC windows. The line consists of: Gsdpfx Akjz A R I Ejyjbu - Welding machine - HOLLINGER MSP, year 2005 - Transport and cooling table - HOLLINGER SVS, year 2005 - Automatic cleaning machine with welded frame turning - ROTOX EPA 472, year 2005. The production line was only used in Germany and is in very good condition, having been regularly serviced. Negotiable price: 25,000 euros + VAT.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LINE FEATURES Gjdpjy S E E Nefx Akyobu 4-head welding machine FUSION 4H Frame unloading unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning machine Rotating table Electronic cleaning machine TRIMMER 4A Extraction table Second milling module Q-MATIC 2 Line supervisor laptop Refilling unit Automatic frame unloading

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Gbedpfx Akozuukqeyeu Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Gbjdpji Akrkjfx Akysu Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar Godpfx Asz A Dxkokyobu • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Condition: ready for operation (used), Year of construction: 2012, complete production line from SCM Technical details: Workpiece length 250 - 3,100 mm Productivity 180 parts/shift Feed rate, continuously adjustable, max. 20 m/min Automatic central lubrication system CE conformity marking Gbedez D R S Tjpfx Akyeu 2 slot spindles with HSK85 tool holders 2 profiling spindles, right, with HSK85 tool holders 2 profiling spindles, left, with HSK85 tool holders 3 spindles, horizontal 8 tool changers, 96 positions Space requirement approx. 30,000 x 15,000 mm Equipment of the system: 1 - Transverse conveyor SCM for feeding the planing machine 2 - Planing machine Superset NT 31 3 - Transverse conveyor SCM to the double-end profiler 4 - Double-end profiler SCM Multiten D 5 - Transverse conveyor SCM to the drilling machine 6 - Drilling machine SCM Fleximat 7 - Double-angle transfer with transverse buffer SCM TA 1/1 8 - Drilling machine SCM Fleximat 9 - Double-angle transfer with transverse buffer SCM 10 - Longitudinal conveyors 11 - Profiling machine SCM Winprof R 12 - Transverse conveyor SCM 13 - Profiling machine SCM Winprof L 14 - Transverse conveyor at the outfeed SCM

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization Gbedpfjxa Ettsx Akysu - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, • output: approximately 120 kg/h, • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Gbedpfx Akjzlpaboysu Location: Lower Silesian Voivodeship, Poland.

Year of construction: 2012, condition: excellent (used), Welding and cleaning line in a 90° configuration, running from right to left, consisting of a 4-head welding machine SMK 504, a cooling table, and an automatic cleaning machine EPA 479 with a turning station. Maximum welding size = 3,570 mm x 2,500 mm, currently programmed for Kömmerling 76 AD, 88 MD profiles. CNC cleaning machine with corner and shear hinge drilling device for Siegenia fittings, sealing strip holder, WINDOWS control system on the welding and cleaning machines, and safety fences. Currently set for V-groove processing. Gbodpfx Asz Dihyekyju

Condition: new, Year of construction: 2026, SEM65/28 PVC Corrugated Pipe Extrusion Line Complete Production Line for Flexible Corrugated PVC Pipes Ø10–40 mm The SEM65/28 extrusion line is designed for continuous production of flexible corrugated PVC pipes. The line includes automatic material feeding, drying, extrusion, water-cooled pipe forming, automatic cutting and double-station winding. Equipped with Siemens PLC control and DELTA frequency inverters. Only one operator is required. 1. General Specifications * Model: SEM65/28 * Material: PVC * Capacity: 40–70 kg/h, depending on material * Pipe Diameters: Ø10, 16, 20, 25, 32, 40 mm * Wall Thickness: 1–2 mm * Production Speed: 5–30 m/min * Total Installed Power: 50 kW * Actual Power Consumption: Approx. 70–80% * Power Supply: 380 V, 3-phase, 50 Hz * Operating Direction: Right to left * Operators: 1 * Color: Grey * Installation Space: 11 × 2.5 × 3 m * Operating Temperature: +5°C to +40°C * Maximum Humidity: 85% 2. Equipment Included 1. ZJ300 Vacuum Auto Loader – 1 unit 2. STG-U100 Hopper Dryer – 1 unit 3. SEM65/28 Single-Screw Extruder – 1 set 4. Extrusion Die Head with Interchangeable Tooling – 1 set 5. Corrugated Pipe Forming Mold Blocks – 3 sets Ø10-40, Ø25-20, Ø16-32 6. High-Speed Corrugator – 1 unit 7. Automatic Double-Station Winder – 1 unit 3. SEM65/28 Single-Screw Extruder * Screw Diameter: 65 mm * L/D Ratio: 28:1 * Screw Speed: 0–40 rpm * Main Motor: 22 kW, asynchronous * Motor Control: DELTA vector inverter * Screw & Barrel: 38CrMoAlA, nitrided * Heating Zones: 4 * Heating Power: 3.2 kW × 4 * Heaters: Ceramic * Cooling Fans: 4 × 0.18 kW * Feed Throat Cooling: Water * Gearbox: SJF-173 * Gearbox Lubrication: Forced * Gear Material: 20CrMnTi steel * Capacity: 40–70 kg/h Gbedpfx Ajz Nkpwjkyou * Control: PLC 4. High-Speed Corrugated Pipe Forming Machine Water-cooled corrugator with an enlarged cooling area for efficient pipe forming. * Main Drive: 4 kW induction motor * Speed Control: DELTA inverter * Forming Plate Hardness: 63.4 HRC * Cooling: Water * Vertical Adjustment: Electric * Horizontal Adjustment: Manual * Adjustment Motor: 1.1 kW * Platform Travel: 800 mm * Forming Method: Pneumatic blow forming * Vacuum Pump: 4 kW Automatic Cutting System * Pneumatic inline cutter * Adjustable cutting length * PLC control 5. Automatic Double-Station Winder * Type: Double-station * Drive: 12 N·m torque motor * Speed Control: Automatic synchronization * Traverse: Spindle speed tracking, frequency-controlled * Station Switching: Pneumatic self-locking * Air Pressure: 0.6–1 MPa 7. Wire device * Device for pulling a steel wire through corrugated PVC pipes during production, allowing easier cable installation 8. Applications Production of flexible PVC corrugated pipes for electrical cable protection, cable management, industrial installations and general-purpose conduit applications.

Year of construction: 1990, condition: used, LIQUIDATION SALE – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we offer for sale a complete used technological line for the production of ceramic products, consisting mainly of HANDLE and KELLER equipment. Complete production line price: EUR 400.000 net, EXW, negotiable. Gsdpfx Akoy Nzpreyjbu To facilitate a quick sale, we also offer: • the complete production line, • individual production sections, • individual machines and equipment. Prices for individual machines are available upon request. Reasonable offers will be considered. Preference will be given to buyers able to complete the transaction and collect the equipment quickly. The line consists of the following machines and equipment: 1. Raw material pre-processing section • HANDLE R469 edge runner, year of manufacture 1955 • AGW 1065/1085 roller crusher, year of manufacture 1963 • WF 1080A roller crusher, year of manufacture 2005 • Belt conveyors – 4 units • Control cabinet 2. Forming section • HANDLE MDVG 920B mixer, year of manufacture 1990 • HANDLE PZG 56A/50 extrusion press, year of manufacture 1990 • KELLER type 4155 cutter, year of manufacture 1990 • Belt conveyors – 4 units • Control cabinet The equipment is characterized by robust construction, durability and straightforward maintenance. The production line was in continuous operation until the end of 2025 and is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Please specify in your inquiry whether you are interested in the complete line, a production section or a particular machine. Additional technical information, photographs and individual prices are available upon request.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Gsdpfx Akoy St U Soyjbu Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2686017, For sale is a steel cutting machine from ROTOX, type SZA268, manufactured in 2020. The ROTOX SZA268 is an automatic sawing machine used for cutting steel rectangular tubes and steel profiles with a wall thickness of up to 4 mm. The 90° sawing unit with hydraulic feed enables precise cuts, which can be performed either parallel to a ROTOX PVC cutting line or according to a cutting list. The length positioning is controlled by a servo axis, and the machine features a PC control and a profile-independent clamping system for flexible operation. Technical data: Dimensions: Machine width: approx. 12.5 m without protective fence Machine depth: with 10 mm table: approx. 2500 mm without protective fence with 20 mm table: approx. 3500 mm without protective fence Machine height: approx. 1900 mm Weight: approx. 2560 kg incl. feeding magazine for 10 reinforcing bars and removal table with pusher Cutting angle: 90° Cutting length min / max: 250 / 3500 mm Usable tools: All saw blades must comply with EN 847-1 and be approved for the speed of the saw motors. Saw blade: Ø 450 x 4.0 x 50 mm, Z300 Material to be processed: Steel or aluminum reinforcing bars for window construction Bar length min / max: 450 / 6500 mm Profile height min / max: 7 / 80 depending on the contour mm Profile width min / max: 28 / 80 depending on the contour mm Electrical: Mains connection: 3/N/PE~ 50 Hz 230/400 V ± 5 % Power: 2.4 kW Rated current: IN= 16 A Fuse: B 16 A Mains connection cable (type): H05RR-F 5G2.5 qmm Protective conductor: 10 mm² Cu Saw motor: 230/400 V; 50 Hz; 1.5 kW; 5.7/3.3 A Output speed: 65 1/min Lubrication: 0.6 l mineral oil CLP 220 Pneumatics: Operating pressure: 7 bar Limit pressure: min. 6 bar (also during operation) max. 8 bar Compressed air quality: ISO 8573-1: 2010, Class 7.2.4 Pressure switch: Warning pressure 6 bar / Shut-off pressure 5 bar Air consumption: approx. 60 l per cut Hose connection: Ø inner 9 mm Hydraulic linear drive Operating pressure: 160 bar Stroke: 200 mm Motor: 24 VDC; 500 W Workpiece clamping: Pneumatic Permissible ambient temperature during operation: min. 15 °C and max. 40 °C Gbsdpfx Aksziandsyju Operating manual available in digital format. Subject to prior sale, changes and errors.

Condition: excellent (used), CATALOGUE NUMBER 7816 TECHNICAL DATA DDCA - length of the sanding belt: 180 – 845mm - width of the sanding belt: 30 – 75mm - thickness of the sanding belt: 10 – 45mm - spindle diameter: 30mm - max. disc diameter: 250mm - 5 spindles: - left side: 1) vertical upper 2.2kW 2) horizontal lower 2.2kW right side: 1) vertical lower 2.2kW 2) vertical upper 2.2kW 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - material clamping device: 2 pcs - stepless feed speed adjustment: 0-10m/min Gbsdozx Rkzspfx Akyeu - spindle diameter: 5x100mm - dimensions (L/W/H): 1870/2230/1320mm DDGA - width of the workpiece: 35 – 130mm - thickness of the workpiece: 10 – 40mm - minimum length of the workpiece: 200mm - spindle arrangement: 1) lower 5.5kW 2) right 5.5kW 3) left 5.5kW 4) upper 5.5kW - spindles adjustable up/down - 6-knife cutter heads mounted on the upper and lower spindles - spindle diameter: 40mm - milling cutters mounted on the right and left spindles, max. diameter: 50mm - spindle diameter: 30mm - 2 feed speeds: 4.9kW - central chain lubrication via an oil pump - spindle diameter: 4x125mm - dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish production - 5 spindles - unpainted - very good condition - used production line Net price: 52900 PLN Net price: 12302 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: used, Year of construction: 2004, functionality: unexamined, EPAL Production line is for sale in Latvia Consists of: Wood lengthening machine - KALLFASS PFA-250 Pallet leg lengthening machine - Bohm & Kruse Pallet top nailing machine - ENGELER Pallet turning machine Chain conveyor Pallet nailing machine - Bohm & Kruse Marking/corner cutting machine - Bohm & Kruse, Type 3/24/1500 Milling machine Gbodpfxswgacre Akyou Roller conveyor Stacker - ENGELER ELEWFTORSTAPLER