Used Rollforming Unit 18 Stations for sale (41,741)

Year of construction: 1988, condition: good (used), 18 stations shaft Ø: 89 mm Fpedpfx Aebh H T Ijkyjn strip width: 600 mm strip thickness: 3 mm

Condition: good (used), WSM Stationary Screw Unit, Assembly Station Fpodpfx Aoibichskyjn Assembly of components for car radios and navigation systems, as well as testing of these components. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with interlocking (locking). The doors are locked in automatic mode and can only be opened when the automatic mode is stopped or in manual mode after pressing the "Doors" button on the control panel. The automatic mode cannot be started when a door is open. Functional Sequence The station is loaded with the pre-assembled unit via the conveyor belt. The following describes the work steps of the automatic station with a process flow for a WT (test object). In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled unit in Station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the WT onto the belt - Positioning the WT with the pre-assembled unit in Station 2.2 - Positioning the screwdriver and screwing in the front PCB - Lowering the WT onto the belt - Positioning the WT with the pre-assembled unit in Station 2.3 - Lowering the light shield and making contact, moving the carrier with the test sensors from below - Type-dependent testing of the lighting of the SD + CD slots and buttons - Functional test of the CD eject button - Lowering the WT onto the belt > continue If errors occur during the test, they are displayed on the display and can be corrected if possible. To do this, switch to manual mode and open the doors. After the repair and starting the automatic mode, the WT is tested again in the station. If no repair is possible (e.g., screwing error), the WT is marked as NIO (Not In Order) in the control system and is no longer processed. Manual NIO marking and removal are also possible. More new and used assembly stations - find them in our shop! International shipping costs on request!

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Falzwerk 3. Station Eigensteuerung / Folding Unit 3. Station SelfControl MBO T79-3-46/2Baujahr / Year 1994 - Serial-No. 940114747 2 Taschen Falzwerk / 2 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fodpoilx Snefx Akyspn

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Falzwerk 2. Station Eigensteuerung / Folding Unit 2. Station SelfControl MBO T79-2-81/4Baujahr / Year 1994 - Serial-No. 940114747 4 Taschen Falzwerk / 4 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Fedeilx Srepfx Akyjpn On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2009, Seeding station with discharge system, BmTEC, 2-row configuration Year of manufacture: 2009 Condition: refurbished Working width: 300 mm Infeed height: 820 mm Humidification belt with integrated water bath for humidifying the underside of the dough Immersion depth adjustable Tilting belt with adjustable tilting height for reliable turning of the dough pieces Sprinkling from above with adjustable sprinkling quantity Adjustable pressure roller for fixing the sprinkled material Automatic seed return Fsdpfxoz A Sgcs Akyepn Includes 2 spreading containers All belt speeds are adjustable Fast and slow discharge possible Automatic sheet feed Max. discharge length: 800 mm External dimensions (L x W x H): 330 x 130 x 220 cm

Condition: excellent (used), Year of construction: 2005, dual track rollforming line 2 x 18 stations design: cassette shaft Ø: 30 mm strip width: 200 mm Fpsdpfeh Tm Rlox Akysn strip thickness: 1 mm

Year of construction: 2005, condition: excellent (used), 16 stations design: cassette Fpjdpjh I Nizefx Akyen shaft Ø: 45 mm strip width: 300 mm strip thickness: 2 mm

Condition: excellent (used), Year of construction: 2005, 19 stations Fjdpfx Akeh Tm Rajyspn design: cassette shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm

Condition: used, Year of construction: 2006, machine/vehicle number: HB45, functionality: fully functional, Year of manufacture 2006 / revision 2009 Connected load 40 KW Machine weight 9650 kg Processing units 12 horizontal 12 vertical 6 Total units 18 Circular indexing 0.7 seconds Number of collets 12 Type B45 Maximum clamping 45.00D diameter Length of workpieces max 170 mm Hydraulic unit 10L/Sp-30ccm/4Kw/NG 150 Control cabinet / gallows + pendant control OP 10C Loading magazine 4.20 M Platform Coolant system Fodpfx Aksvt Ummjyjpn Exhaust nozzle Stairs

Year of construction: 2026, operating hours: 2 h, condition: new, functionality: fully functional, SPECIAL PRICE SHOWROOM UNIT: EUR 2,250.00 - - - - - IMPORTANT: delivery time (ex works) approx. 3 weeks Roller glue application units for edge banding machines require regular cleaning, service and maintenance. Wood chips, burned glue particles and other contaminants behind the glue roller won't allow an even and thin glue film on the roller. Hence there won't be an ideal glue application to the board. This is valid for EVA hot-melts and even more so for PUR glues. As long as the glue application unit is still inside the machine the limited accessibility will restrict maintenance success and also result in longer down time. If the application unit is removed the quick cooling-down will prevent thorough cleaning. Furthermore the lack of a proper fixing device and a drive motor for the glue roller are other disadvantages. Technical Data: - 2-temperature control (2 channels) with easy to read display - Heating target temperature and drive starting temperature can be set individually - Glue roller speed: 60 rpm - 2 straight wheels, 2 turnable wheels with brake Fodpfsy Ipk Iex Akyspn - Main supply connection cable: 10 m - Power supply: 380(400) V, 50/60 Hz - Installed power: approx. 2 kW (max) - Dimensions  L x W x H:  60 x 50 x 100 cm - Weight: ca. 60 kg - Painting in light grey RAL 6035 u. traffic blue RAL 5017 Technical documentation with operating instructions, spare parts list and wiring diagram are included in the scope of supply.

Condition: good (used), Year of construction: 1975, 13 stations shaft Ø: 50,4 mm strip width: 500 mm strip thickness: 1,5 mm Fsdpfebif E Esx Akyspn

Year of construction: 1968, condition: good (used), 15 stations Fpedpebif Evefx Akyjn shaft Ø: 120 mm strip width: 180 - 830 mm strip thickness: 10 mm

Year of construction: 2021, condition: used, For sale is a robotic autonomous transport unit. The system was acquired in 2021 and is being sold due to the closure of the business. The system consists of: Fodpfx Aoz I S Ikskyjpn 3 units of autonomous transport unit FTS Cobot GoPal E24W 6 units of stationary pallet transfer station for GoPal 400/E24 in the robot cell 7 units of GoPal conveyor belt transfer station for GoPal E24W at the final assembly station 7 units of pallet conveyor systems as a prefabrication station, approx. 4m long, 1200 mm wide, for 3 pallets 2 units of GoPal charging station Power Station 1 unit of GoControl server 17 units of GoPal control unit 2 units of GoPal auxiliary interface box 20 units of kit for pallet recognition The system has been professionally dismantled and is stored in our warehouse. Pictures 1-2 show the system at the previous operator, pictures 3-7 show the system dismantled in our warehouse. An inspection is possible after arranging an appointment.

Condition: good (used), Siegmund System Perforated Table including Silverline Profile Processing Station For sale is an extremely robust, combined industrial workstation for metalworking, jig and fixture construction, or precise profile manufacturing. The system consists of top-quality components: 1. Siegmund System Perforated Table (base) - High-precision, extremely warp-resistant, and solid welding and clamping table from the world market leader, Siegmund. - The perforated system (including perforation on the side panels) allows for flexible and repeatable positioning of stops, clamping bolts, and angles. 2. Silverline Clamping & Processing System (assembly) - Solid upper structure with precise linear guides for longitudinal movement. - Two parallel-arranged, yellow motor heads (milling/drilling units) for simultaneous or staggered processing steps. Fpjdpfxeztawgo Akyjn - Three heavy-duty, horizontal clamping bars securely fix workpieces from the rear against the stops, ensuring material protection. 3. Pneumatic Comfort Control - Ergonomic control panel on the front with a 5-way numbered lever control. - Selective control of individual pneumatic cylinders. - Integrated analog pressure gauge and safety emergency stop switch. - Powerful, central electric motor for the mechanics/hydraulics. Dimensions: Tabletop: 2000 x 1000 x 200 mm Table height: approx. 900 mm, height adjustable Overall dimensions: 2420 x 1400 x 1580 mm This offer is for one Siegmund System Perforated Table. "Everything from a single source: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, STANGE Elektronik GmbH Industrial control / Process control SE-604 Process control with temperature monitoring and additional connections For sale is a used industrial control unit from the manufacturer STANGE Elektronik GmbH, model SE-604, installed in an additional housing with various operating and connection components. The SE-604 combines industrial process control, a multitasking PLC with CoDeSys, program management, and plant visualization in a single system. The offered unit also features a PMA temperature controller, an operating hour counter, several industrial connectors, and additional operating and connection options. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Device type: Industrial control / Process control Display: 6.5-inch TFT-LCD Resolution: 640 × 480 pixels Operation: Foil keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC Voltage supply SE-604: 24 V DC (18–36 V) Power consumption: typ. 24 W Operating temperature: 0 to +50 °C Fsdez Nvk Hopfx Akyepn Protection class SE-604: Front IP65 / Rear IP20 Dimensions SE-604 (W × H × D): 290 × 165 × 90 mm Weight SE-604: approx. 2.5 kg The specified dimensions and weight refer exclusively to the SE-604 control unit. The overall dimensions and total weight of the offered unit with housing are not known. Functions according to the manufacturer: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function Configurable plant visualization Web server / remote control Configurable user and operating levels Interfaces of the SE-604 according to the manufacturer: Ethernet 10/100 2 × USB 2.0 RS232 RS422 CAN Profibus DP optional Modbus optional Additional equipment of the offered unit: PMA KS 10-1 economy temperature controller Temperature monitoring test chamber Müller operating hour counter Button "Heat Plate" Button "Light" Front USB port Multi-pole industrial connectors Additional colored connection sockets Housing with side carrying handles Connection and connecting cables as shown in the pictures The exact arrangement and function of the additional connections are not known. The mentioned control functions describe the technical possibilities of the SE-604 according to the manufacturer. The actually installed software and configuration of the offered unit have not been checked. Application areas: Industrial and process plants Heat treatment plants Multi-purpose chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Testing and experimental systems Spare part for compatible systems Scope of delivery: 1 × STANGE SE-604 control system in housing 3 × Connection and connecting cables as shown in the pictures 1 × Folder as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear are present Operating hour counter present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer further questions by phone.

Condition: like new (used), Year of construction: 2024, operating hours: 24 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,970 cm³, rotational speed (min.): 1,500 rpm, type of cooling: water, CHP POWER PLANT fueled by SYNGAS (Woodgas) with electrical capacity 140 kWel and thermal capacity 280kWth Fjdpsz Iyq Tofx Akyopn

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Fjdpjupbd Hsfx Akyopn -Manufacturer: Stankoimport Caenaho, hydraulic unit -Motor: 220/380 V/ 1400 rpm -Individual components: Technical data see photos type plates -Dimensions: 420/380/H310mm -Weight: 30 kg

Condition: used, Year of construction: 2008, overall weight: 1,250 kg, total width: 1,220 mm, total length: 2,700 mm, total height: 2,245 mm, nominal heat output: 600 kW (815.77 HP), No. 10035 2 units stationary warm air heater / generator Kroll 730 S-300 Used, year of construction 2008 According to our customer / the previous owner, the machines are fully functional and can be viewed on site Heat output QN: 600 kW Rated heat input QB: 652 kW Warm air flow rate VN: 48,300 m³/h Rated pressure DN: 300 Pa Motor: 15.0 kW / 28.6 A CE-compliant Transport dimensions each approx. 2700 x 1220 x 2245 mm LWH Weight each approx. 1250 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location Fpjdpfxezlr Uuj Akyen

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm Fjdpfx Aeyil A Sekyepn Location - Poland

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE Fedpfxjy Rxzho Akyepn 11 STATIONS WIDTH: 450 mm FULL OVERHAUL

Condition: ready for operation (used), Fanuc A06B-6059-H218#H519 / A20B-1003-0120 / 02A AC Spindle Servo Unit SN: ES0702690A, used, in good condition, 100% fully functional, delivery as shown in the photos. Fedpfxjx Eq T Eo Akyjpn

Condition: used, Year of construction: 1990, Heavy-duty rollforming line Fedpfx Aeymzzuekyepn 10 stations Width: 260 mm

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fpsdpoz Iwpgsfx Akyjn Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete Fpsdpfx Akjyc H I Soysn • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, VEB Polygraph 882/2-18 gathering machine 18 gathering stations Features suction feeding 3-phase power, requiring 2-10 kW of power consumption at 440 V Fjdpfx Akox Ab Ncjyepn