Used Remko Chiller / Refrigeration Unit for sale (34,439)

Condition: used, BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open-circuit cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are priorities. Technology Patented BACross III fill media system, which allows for easy inspection of the fill to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance access: A large, inward-swinging access door and internal maintenance platforms allow technicians to conveniently perform inspections while standing inside the unit. Hygiene control: The design minimizes standing water and protects against sunlight through special air inlet elements, reducing algae growth. Flexibility: The single-sided air intake allows the cooling tower to be installed even in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial cooling: Used in factories for process cooling. HVAC: Used in large building complexes as part of a central chiller system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity, as the actual performance depends entirely on the thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Prjdpfx Ajynkbmedljc Water temperatures: The performance changes significantly depending on the warm water inlet temperature (e.g., 35 °C) and the cold water outlet temperature (e.g., 29 °C). Air volume flow: According to BAC's technical data, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three installed 11.0 kW fan motors. If this air volume is reduced by a frequency inverter (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of power the tower can provide. Technical Data: Fan and Air Data - Air volume flow: 60.0 m³/s (generated in suction operation) - Fan motors: 3x 11.0 kW (axial fans) - Technology: Integrated belt drive - Water flow: 198 l/s Hydraulic Connections - Water inlet: 1x DN 250 (nominal size ND 250 mm) - Water outlet: 1x DN 300 (nominal size ND 300 mm) - Make-up water connection: 1x DN 40 (ND 40 mm) - Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions and Weights - Operating weight: 11,446 kg (including water fill up to overflow) - Shipping weight: 5,350 kg (empty weight) - Heaviest single part: 3,114 kg (for installation)

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, 5 units Star Refrigeration water-cooled chillers with 5 cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers 5 towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. Prsdpfezz Rfqex Adloc The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: used, Heck DVAS 180 Refrigeration System, 180 kW Professional, industrial refrigeration system from the premium manufacturer HECK Kältetechnik GmbH. The system is in very good condition for its age and has been reliably in operation until recently. Thanks to the modern refrigerant R513A, the system is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of construction: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for the efficient cooling of large halls or commercial spaces. Heating capacity: 290 kW – Highly efficient air heating through the intelligent use of waste heat from the cooling process. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Thanks to these combined performance characteristics, the system is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. Prodpfxezrlzzj Adlsc The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporating temperature: The system is designed for an evaporating temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g. cabin, cooling zone or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator highly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "Everything from a single source: We will be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, IKS Cooling Unit 20.4 kW Manufacturer: IKS Series: IPE 051 Refrigerant: R407 C Quantity: 3.1 kg Max. Pressure: 27.6 bar Temp. min/max: -10/55°C Cooling Capacity: 20.4 kW Compressor Power Consumption: 5.6 kW Temperature Stability: 2 K Tank Capacity: 110 liters Water Connections: 1 1/4" Male Thread Cooling Air Volume: 5370 m3/h Power Supply: 400/50/3 V/Hz/Ph Net Weight: 300 kg Dimensions: L x W x H 980 x 800 x 1785 mm Prjdpfx Asxbfknjdljc More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, SINGLE Industrial Chiller / Water Cooler / Chiller SINGLE SKA-10-W/STK Cooling capacity 14.0 kW according to the nameplate Year of manufacture 2016 – Industrial chiller with touchscreen control Refrigerant converted to R452A For sale is a used industrial chiller from the manufacturer SINGLE Temperiertechnik GmbH, model SKA-10-W/STK. The chiller is suitable for cooling industrial equipment, machines, production systems, and process circuits. The unit features an integrated controller with a touchscreen interface. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: SKA-10-W/STK Type of equipment: Industrial chiller / Chiller Year of manufacture: 2016 Country of manufacture: Germany Cooling capacity according to the original nameplate: 14.0 kW Permissible temperature range TS according to the nameplate: Predpfs Aay H Sjx Adlsc -30 °C to +20 °C Refrigerant circuit: Current refrigerant according to specifications: R452A Original refrigerant: R507 Original filling quantity according to nameplate: 13.0 kg Current filling quantity after conversion: not confirmed The refrigeration system was converted to the refrigerant R452A. The original refrigerant specifications on the nameplate refer to the delivery condition with R507. The current filling quantity and the CO₂ equivalent must be confirmed separately after the conversion. Pressure specifications according to the original nameplate: Max. operating overpressure PS: 24 bar Setting pressure safety valve: 28 bar Test pressure PT: 27 bar Electrical data: Power connection: 400 V / 3~ / PE / 50 Hz Rated current: 41.7 A Apparent power: 28.8 kVA Control / Operation: Touchscreen interface Display for three temperature control circuits (TCU 1–3) Display of process and temperature data Setpoint and actual value display Supply and return temperature display Flow display Modbus configuration menu Profibus status displays Alarm and operating status display Equipment: Industrial chiller with refrigeration circuit Integrated touchscreen control Electrical main switch Hydraulic connection lines and pipe connections Overflow connection Drain connection with shut-off valve Housing with ventilation openings Closed industrial housing Castors Equipment as shown in the pictures Areas of application: Industrial cooling Process cooling Machine cooling Production systems Machine tools Plastics processing Test bench cooling Temperature control and cooling circuits General industrial cooling applications Dimensions / Transport: Dimensions (L × W × H): not yet determined Unladen weight according to the nameplate: 1,020 kg The exact external dimensions must be determined before shipment. The actual transport weight may vary depending on residual media, accessories, and packaging. Condition: Used Year of manufacture 2016 Refrigerant converted to R452A Optical condition as shown in the pictures Signs of use and some deposits on the connections. Scope of delivery: 1 × SINGLE SKA-10-W/STK industrial chiller Integrated touchscreen control Connections and equipment as shown in the pictures Scope of delivery otherwise as shown in the pictures. Shipping by freight forwarder possible upon request. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Rehsler TW HL4006D industrial chiller unit The Rehsler TW HL4006D is an industrial chiller unit specifically designed for cooling the high-performance Trumpf Haas HL 4006D laser. The system is designed to dissipate the waste heat generated during the laser process, thereby ensuring a constant operating performance. The unit is primarily used in automated production lines, often in conjunction with industrial robots, where the associated laser is used for welding highly reflective materials such as aluminum or copper. Technical data at a glance: The unit is characterized by the following performance parameters: - Cooling capacity/rated output: 11 kW. - Electrical connection: 400 V voltage with a current draw of 18 A. - Operating pressure: Permissible pressure up to 10 bar. - Protection class: IP54 (protected against dust and splashing water). - Temperature range: Suitable for ambient temperatures of at least 5 °C up to a maximum of 43 °C. “Everything from a single source: We will be happy to offer you suitable bank financing for your project.” You can find more new and used items in our shop! Pjdpjxg Hmnsfx Adljrc International shipping costs on request!

Condition: new, Year of construction: 2023, functionality: fully functional, power: 37 kW (50.31 HP), overall weight: 380 kg, total width: 1,160 mm, total length: 1,535 mm, total height: 1,300 mm, type of input current: three-phase, pressure: 2.5 bar, input voltage: 400 V, volume flow: 6.41 m³/h, cooling capacity: 37.2 kW (50.58 HP), type of cooling: water, Equipment: cooling unit, Remko KWL 370 inox chilled water unit, new/unused in original packaging Stainless steel design Nominal cooling capacity 37.2 kW Refrigerant R407c (10.51 kg) Maximum power consumption 42.03 A Prodpfezh Dguox Adljc Sound pressure level at 10 m 51.3 dB(A) Dimensions 1300x1160x1535 mm (H x W x D) Weight 380 kg

Condition: excellent (used), functionality: fully functional, operating hours: 6,500 h, overall weight: 350 kg, cooling capacity: 37 kW (50.31 HP), type of cooling: water, Like-new cooling system from PIOVAN. 37 kW cooling capacity. Prjdpfx Adoxf Tu Njlsc All important data can be found in the documents below! From a very clean cleanroom production environment. Used only for tool sampling.

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, cooling capacity: 29 kW (39.43 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, temperature: 10 °C, volume flow: 4.5 m³/h, total width: 830 mm, total length: 1,240 mm, total height: 2,030 mm, noise level: 62 dB, empty load weight: 540 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, KKT cBoxX40 chiller, year of manufacture 2021, air-cooled cooling unit for frost-free indoor installation. Cooling capacity 29 kW (at water supply temperature 10 °C, ambient temperature 35 °C). Refrigerant R410A, compressor with energy-efficient scroll technology. Condenser in a compact design with high fin efficiency and low refrigerant charge. Speed-controlled fan with EC-Blue technology according to ErP 2015, corrosion-resistant Owlet blades. Electronic expansion valve with high control accuracy. Evaporator as a plate heat exchanger in an asymmetrical design. Water circuit: customer-specific piping with external connections, insulated stainless steel tank (1.4301) in an atmospherically open design, electronic level monitoring incl. low water/dry-run protection, temperature and pressure display in refrigerant supply and return, flow control for evaporator protection, multi-stage centrifugal pump. Control cabinet: design according to DIN EN 60204 Part 1 and VDE 0113 Part 1, controller with plain text display (multilingual, including German, English, French), main switch, motor protection switch, transformer for 24 V DC control circuit, status display, protection class IP54, collective fault/warning message with potential-free contact, potential-free remote control, short-cycling protection, limit value monitoring min./max. Technical data: flow rate 4.5 m³/h, free pump pressure 3.0 bar, air flow rate 9,350 m³/h, sound pressure level 62 dB(A), permissible ambient temperature +5 to +45 °C, tank volume 300 l, water connection Rp 1 1/2", operating voltage 400/3/50, dimensions (H×W×L) 2,030×830×1,240 mm, net weight 540 kg. Predpfszzvgajx Adloc Additionally included: insulation of the refrigerant lines and the pump inside the housing, overpressure valve for standby operation, level kit (supplied loose) for height differences >500 mm between chiller and consumer, leveling feet (supplied loose) for vibration decoupling and height compensation up to 5° floor slope. Complies with the Ecodesign Directive (EU) 2015/1095 and (EU) 2016/2281. Condition, history and handling: year of manufacture 2021, ordered 07/2021, delivery week 38/2021. The unit was operated in conjunction with a Sollich temperature control system, the production use of which amounted to approximately 180 operating hours; an operating hour counter is not available. Stored in Wuppertal since the end of 2024, inspection by appointment. Purchase value in 2021 according to offer: 9,800 € net. Sale from commercial to commercial, excluding warranty, technical data according to manufacturer's documents, errors and omissions excepted. This cooling unit is also available as part of a complete temperature control and mixing system (including Turbo temperature controller TE 1600 D and nut mixing unit NM 200 VA), see advertisement ID A22725782.

Condition: good (used), Year of construction: 2015, EUROCHILLER ETW-P 1518/135 (2015) - 20 units available Industrial Water Temperature Control Unit – Heating & Cooling Manufacturer: Eurochiller S.r.l., Italy Model: ETW-P 1518/135 Pjdez R Tnmopfx Adlerc Year of Manufacture: 2015-2013 Condition: Good TECHNICAL SPECIFICATIONS Electrical Data 1. Operating Voltage: 400 V 2. Frequency: 50 Hz 3. Total Electrical Power: 20 kW 4. Rated Current: 31 A 5. Auxiliary Voltage: 110 V 6. Protection Rating: IP54 7. Certification: CE Heating & Cooling 1. Heating Capacity: 18 kW* 2. Cooling Capacity: Up to approx. 135 kW* 3. Temperature Control Medium: Water 4. Operation: Heating and Cooling DESCRIPTION The EUROCHILLER ETW-P 1518/135 is an industrial water temperature control unit designed for precise temperature regulation in manufacturing processes. The system combines heating and cooling functions to maintain stable process temperatures, making it suitable for injection moulding machines, plastics processing equipment and other industrial applications. Key Features: 1. Integrated heating and cooling system 2. Precise water temperature regulation 3. Suitable for industrial and plastics processing applications 4. Robust industrial construction 5. Manufactured in Italy _Heating and cooling capacities are based on the model designation and require confirmation against the manufacturer’s technical documentation._ Manufacturer: EUROCHILLER – Italy Year: 2013 CE Certified

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Prsdog D H Ruopfx Adlec Weight 100 kg Good condition

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Linde / Bitzer | Triple-Compressor Industrial Chiller Technical specifications of the frame: Unit manufacturer: Linde Aktiengesellschaft Model / Type: VHM 316-4521 Serial number: 10309 Year of manufacture: 1993 Refrigerant: R22 Allowable working pressure: 25 / 13 bar Overall dimensions of the frame: 2930 × 830 × 1870 mm Specifications of the installed compressors (3x Bitzer Kühlmaschinenbau GmbH): Power supply: 380–420 V (50 Hz) / 440–480 V (60 Hz) – 3 phases Maximum operating current: 24 A (per compressor) Volumetric capacity per unit: 42.3 m³/h (for 50 Hz) / 51.0 m³/h (for 60 Hz) Pedpey Ub A Nsfx Adlorc Total volumetric capacity of the unit: 126.9 m³/h (for 50 Hz) / 153.0 m³/h (for 60 Hz) Protection class: IP 54 List of compressors in the section: Compressor no. 1: Type S4G-12.2 Y Serial number: 15851279 Compressor no. 2: Type S4G-12.2-40P Serial number: 1676905728 Compressor no. 3: Type S4G-12.2-40P Serial number: 1678210359 Industrial central multi-compressor unit (so-called "compressor pack") built by the German Linde Group based on three two-stage, semi-hermetic Bitzer reciprocating compressors from the S4G series. This type of system is designed to power low-temperature installations – freezers, freezing tunnels, and advanced refrigeration systems in food processing plants (meat, fish, bakery). The design based on three identical units allows for very flexible, three-stage cooling capacity management (in steps of 33%). The system automatically activates the appropriate number of compressors depending on the actual thermal load, which optimizes energy consumption and extends the service life of the components. The entire unit is mounted on a compact support frame, which facilitates installation. Key features: - Reliable Bitzer two-stage compressors: The two-stage compressor series is specifically designed for deep freezing. It ensures stable operation at very low evaporation temperatures and is characterized by a high energy efficiency ratio. - Safety and automation of the Linde frame: The industrial design of the frame integrates a common suction and discharge manifold, an advanced oil equalization and separation system, and the necessary control and measuring equipment (protective pressure switches), which effectively protects the system from failures. - Industrial protection class (IP 54): Hermetic electrical boxes and the compressor design protect the system from moisture and dust, allowing for safe operation in harsh machine room conditions. - Application versatility: The unit is factory-designed to operate with R22 refrigerant. Due to the presence of compressors with the "Y" designation (filled with ester oil), the system can be successfully adapted to work with modern, environmentally friendly alternatives from the HFC group (e.g., R448A / R449A / R404A / R507) after a standard verification of seals and automation settings.

Condition: used, -CLIREF Chilled Water Unit -Type: DRLBY64 -Serial No.: 3663 -Number of compressors: 2 -Type: Semi-hermetic -Power: 70 kW -Voltage: 380 V -Frequency: 50 Hz -Year: 1984 -With 1 forced-air condenser Podpfxow Dvcpe Adlorc -Brand: Copeland -Type: D6DA3500A -COPELAND SEMI-HERMETIC COMPRESSOR D6SH-3500 -Serial number: 2010J4262 -Type: Semi-hermetic piston -Number of cylinders: 6 Are you looking for an efficient cooling system? Have you considered installing a chilled water unit? We offer you an overview of this cooling production system, which is more economical and environmentally friendly than conventional air conditioners and other industrial process cooling systems. A chilled water unit (also called a chiller) is an indirect expansion cooling system. This means it uses an intermediate fluid to transfer “cold” to the emitters. There is no refrigerant circulating through the system: in the case of a chilled water unit, water (pure or glycolated) serves as the intermediary fluid, used here as the heat transfer fluid. This cooling solution is suitable for both industrial process cooling and residential air conditioning applications. Relevant specifications: -Displacement [m³/h]: 106 -Locked rotor current [A]: 304 Iiedcusw Dvcps T Rxiei -Max. operating current [A]: 63.3 -Weight [kg]: 240 -Oil charge: 4.3 dm³ -Power supply: 400V/3Ph/50Hz -Quantity: 02

Condition: new, functionality: fully functional, Staying cool, even when temperatures rise! With rising summer temperatures, reliable cooling in production facilities is becoming increasingly crucial. At ONI, we offer high-performance rental cooling systems, ideally suited for use in production environments. Whether as a replacement if your existing cooling system fails, to support insufficient cooling performance, or for general climate control—we have the right solution for your operations. Our portfolio includes: • Chillers from 10 to 10,000 kW cooling capacity • Various designs, including pump-tank units with regulation and control systems • Containerized cooling systems with all necessary fittings and control devices • Cooling towers, dry coolers, and pump-tank systems with complete regulation and control Prodpfxjxbzafs Adlsc The benefits for your production: • Avoid production downtime with reliable machine cooling • Maximum efficiency with minimal energy consumption • No capital expenditure, as rental is flexible and tailored to your needs • Instantly operational for maintenance downtime, system malfunctions, or seasonal peaks • Flexible connection options for almost any infrastructure • 24/7 hotline and service—even for third-party equipment Plan ahead—avoid unplanned outages We develop comprehensive cooling concepts before acute needs arise, so you are fully prepared for future challenges. Contact us for a no-obligation consultation—we’ll show you how to safeguard your process cooling while minimizing costs and risks.

Condition: used, HUBER Circulating chiller / Thermostat / Process chiller Huber UC055Tw special model Water-cooled circulating chiller for industrial temperature control and cooling applications For sale is a used, water-cooled circulating chiller from Peter Huber Kältemaschinenbau GmbH. This unit is suitable for cooling and temperature control of machines, industrial plants, process circuits, production facilities, and for general industrial cooling applications. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: UC055Tw special model Equipment type: Water-cooled circulating chiller / Thermostat Temperature range: -10 to +40 °C Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Weight: approx. 168 kg Refrigerant: R507 Refrigerant quantity: 1.07 kg CFC and HCFC-free Power connection: 400 V / 3~ N / 50 Hz Max. power consumption: 7 A Max. pressure: 25 bar Refrigeration unit: Water-cooled Temperature range: -10 to +40 °C Equipment: Huber Compatible Control system Digital temperature display Water-cooled refrigeration unit Circulation pump Connections for external temperature control circuit Cooling water connections Drain Residual drain Interfaces Main switch Stainless steel housing Transport rollers Lifting eyes Prsdpfxjzui Uwj Adloc Accessories as shown in the pictures Application areas: Process cooling Machine cooling Industrial plants Production facilities Temperature control of external circuits Cooling water supply Laboratory and process engineering Scope of delivery: 1 × Huber UC055Tw special model circulating chiller Connection / cooling water hoses as shown in the pictures Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, functionality: fully functional, Complete smoking system for butcher shops/food processing, supplied as a set – ready for operation and including all accessories for immediate use. Scope of delivery: • 1 × L'Unité Stein RAKO 3001 smoking cabinet (used) • 1 × Tecumseh Silensys H84Z refrigeration unit • 1 × Stein RRT M exhaust system (for V21 smoking cabinet), including stainless steel pipe, 30 linear meters, Ø 20 cm • 407 pieces of knot-free beech smoking wood (8 × 6 × 40 cm) Pjdpsza Ah Njfx Adlerc Condition: • Used, well-maintained • Regularly serviced • Operating log available Location: Selters. Collection or transport from the location is possible. Further photos and details available upon request. Technical data: Smoking cabinet: L'Unité Stein RAKO 3001 (used) Refrigeration unit: Tecumseh Silensys H84Z Exhaust system: Stein RRT M (for V21 smoking cabinet) Stainless steel exhaust pipe: 30 linear meters, Ø 20 cm Smoking wood included: 407 pieces of knot-free beech wood, 8 × 6 × 40 cm Condition: used, well-maintained, regularly serviced Location: Selters

Condition: used, Huber Type: 030TW Huber Unichiller 030TW – Recirculating Chiller / Cooling Thermostat For sale is a Huber Unichiller 030TW, a powerful and efficient recirculating chiller for laboratory and industrial applications. The unit is designed for continuous operation and offers consistent cooling performance with high energy efficiency. Features & Functions: Prsdpfx Adezii T Ajloc Modern touchscreen control with favorites, timer, data logging, and remote control options Robust, closed-loop cooling system for reliable continuous operation Environmentally friendly refrigerant Suitable for ambient temperatures up to +40 °C Ideal for laboratories, chemistry, engineering, and process cooling Technical Data: Temperature range: –20 °C to +40 °C Temperature stability: ±0.5 K Cooling capacity: 3 kW at +15 °C 2.75 kW at 0 °C 2 kW at –10 °C 1 kW at –20 °C Circulation pump: max. 30 l/min at 4.1 bar Control: Pilot ONE touchscreen controller (5.7″ color display) Connections: Ethernet, USB, RS-232, Pt100 Refrigerant: R449A (CFC and HCFC-free, environmentally friendly) Dimensions (W × D × H): 400 × 440 × 1230 mm Weight: approx. 137 kg Condition: used Scope of supply: (See picture) Huber Unichiller 030TW Power cable (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Rittal Type: SK 3336.509 Technical details: KRA-0045TD00SB97AJ Cooling unit/chiller Prsdpfxezh Dnxe Adljc Rated voltage 3/400V 50Hz Maximum current 6.7 A Starting current 30.4 A Nominal cooling capacity 5040 W Maximum power consumption 3340 W Permissible pressure PT ref: 10 Allowable pressures|PS HP: 24 PS LP: 14 Refrigerant/charge R134a - 2.2 + OKg Temperature range +15 / +43°C Fluid pressure range 1.55-3.75 bar Volume flow rate min 20 L/min...max 70 L/min Tank volume 57 l Noise level 69 dB(A) Protection class EN60529571 IP 44 Year of manufacture Weight 150 kg Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 2024, condition: used, Positive temperature refrigeration unit with cooling unit Cooling unit, Intarcon brand Wall-mounted installation on the refrigeration unit wall Rated electrical power 0.7 kW Power supply 230 V / 50 Hz Rated current 5 A Maximum absorbed current 10 A Maximum starting current 52 A Refrigerant R-134a Refrigerant charge 0.7 kg Maximum permissible pressure 18 bar Hermetically sealed refrigeration circuit Electronic regulator with front panel display White casing with ventilation grille Chamber dimensions: 2120x1720x2470mm Key advantages Wall-mounted installation with limited floor space requirement Single-phase 230 V – 50 Hz power supply Electronic regulator with front panel display Predps Agu Dhsfx Adloc White metal casing with ventilation grille Hermetically sealed refrigeration circuit Refrigerant and its charge identification Nameplate detailing electrical data Manufactured in Spain

Condition: used, Lister KL5L air-cooled chiller Pedpfx Aox Elvzjdlsrc The unit operates based on the principle of indirect cooling: The internal pump pumps cold water from the integrated tank to the external process (e.g., a machine). The water absorbs heat there, warms up, and flows back into the Lister integrated evaporator. The warm water transfers its energy to the refrigerant, and the water is cooled down again. The extracted heat is released into the installation room as warm air via the fan. Due to its compact 3.25 kW cooling capacity, this model is ideal for smaller industrial applications, such as cooling laboratory equipment, laser systems, small welding units, or machine tools. Manufacturer: Lister Type: KL 5 L Cooling capacity: 3.25 kW Voltage: 400 V Frequency: 50 Hz 6.3 Amps Refrigerant: R 134a Max. operating pressure: 13 bar Dimensions (W x D x H): 940 x 560 x 1100 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), mileage: 831,654 km, power: 368 kW (500.34 HP), first registration: 04/2022, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,200 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 8,430 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, onboard computer, parking air conditioner, parking heater, retarder, soot filter, spoiler, trailer coupling, = Additional Options and Accessories = - Air suspension - Air-suspended seats - Particle filter - Auxiliary heater = Notes = Volvo FH13.500 6x2*4 - XL - Thermoking reefer - Retarder - Full air + Schmitz/Vedecar trailer thermoking MY: 19-4-2022 / 8-4-2021 KM: 831654 YV2RT40C2NB364339 / YV2RT40C2NB364339 Boxes: 843 - 250 - 270 / 737 - 252 - 270 Thermking reefers Full spec truck Full air Steering axle I parkcool night climate system Pedpfx Aezuaryjdlerc Retarder Navigation system 5.20 wheelbase = Further Information = General Information Year of construction: 2022 Technical Information Number of cylinders: 6 Transmission Gearbox: I-Shift, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Max. axle load: 9000 kg; Steerable Rear axle 1: Twin tires; Max. axle load: 11500 kg Rear axle 2: Max. axle load: 7500 kg; Steerable Weights Unladen weight: 13,256 kg Payload: 14,744 kg GVW: 28,000 kg Functional Cooling: 20 °C to 20 °C Body manufacturer: Thermoking Cooling engine: Diesel and electric Condition Technical condition: good Optical condition: good Damage: none

Condition: used, mileage: 523,638 km, first registration: 12/2015, maximum load weight: 12,865 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, color: white, driver cabin: day cab, Year of construction: 2015, Equipment: ABS, IVECO STRALIS AD260S36Y\PS E6 HI STREET – Chassis WJME2NPH60C324990 Year 09.12.2015 - EURO 6 Predpfszrmmxox Adlec ENGINE: CURSOR 9 – 360 HP – 8710 cc - KM 523,638 Transmission: Eurotronic 12-speed 12as 1930 Td \ Automatic – Sequential - Expansion Module Body: Color WHITE IC194 Tires: Dim. 315\80r225 STRUCTURE: Wheelbase 6050 MM - Gross Vehicle Weight: 260 Q.li - Payload: 128.65 Q.li - Short Cab \ Low Roof – Active Day New Technology – Hi Street - Air Suspension (Rear) - Third Steerable and Liftable Axle TECHNICAL EQUIPMENT (TRUCK): Rear Differential Lock, Immobilizer, Air Conditioning, Engine Brake with Retarder Function, Power Steering, Electronic Speed Limiter, ABS (Electronic Brake System + Brake Assist System); AEBS (ABS – ASR) + BAS; ESP, Towing Version, Lane Departure Warning System LDWS EU Standard, Adaptive Cruise Control, Hill Holder, Short Cab \ Low Roof – Active Day New Technology – Hi Street, Roof Hatch, Electric Windows Central Locking, Heated Urea Tank 80 Lt; Aluminum Fuel Tank 390 Lt, LED Daytime Running Lights, Pneumatic Driver Seat, Electric and Heated Rearview Mirrors EQUIPMENT: ISOTHERMAL VAN - Brand: CHEREAU - Model: INOGAM P1505 - Serial Number: 99821 Internal useful dimensions 9.80 * 2.46 H 2.45; 01 side door on the right side; 02 rear doors; Equipped internally for dual-temperature operation with liftable and sliding partitions to create a single or different temperature loading zone AUTONOMOUS DIESEL REFRIGERATION UNIT Brand: CARRIER - Model: SUPRA 1250 MT - 02 internal evaporators in the cell for dual-temperature operation RETRACTABLE TAILGATE Brand: DHOLLANDIA - Serial Number: 15070849 – Lifting capacity 20 Q.li ATP Certificate of Category FRC Valid until 09.2027

Condition: used, mileage: 541,000 km, first registration: 12/2017, fuel type: diesel, fuel: diesel, emission class: euro6, Iveco Eurocargo 140 E 250 Freezer Truck with Mitsubishi TDJ 430 D Refrigeration Unit, Lamberet Multitemp - Box Body and Tail Lift Chassis: • Emission standard: EURO 6 C • 250 hp engine, 6,728 cm³ • Cruise control Psdpfowmmxtsx Adlerc • Leaf/air suspension • Automatic transmission • Lane departure warning system • Brake assist • Hill start assist • Differential lock • ABS • ASR / switchable • Airbag • Air conditioning • Central locking • Double passenger seat (3-seater) • Electric windows • Fog lights • Headlight range adjustment • Tire size: 285/70 R 19.5 • Tread depth: 8/6/6/5/9/13 • 14,000 kg GVWR • Unladen weight: 8,580 kg • Payload: 5,420 kg! • Vehicle overall dimensions: 9,130 x 2,600 x 3,450 mm (L x W x H) Body: LAMBERET Freezer Box, Year of Manufacture: 2017 • 17 pallet spaces • 3-wing portal doors at the rear • Aluminum edge protection strips 2x right and left, bottom and top • Tie-down rails, 2 rows on the right and left • Floor: aluminum diamond plate • Internal dimensions: 6,980 x 2,470 x 2,200 mm (L x W x H) • BÄR BC1500 S4- B4 Tail Lift, vertical • 1,500 kg load capacity Refrigeration Unit: • Mitsubishi TDJ 430D Multi Refrigeration Unit (Year of Manufacture: 2017): • Engine / Electric (380 V) • Remote control in the cab • Temperature recorder - German vehicle - 1st owner! - TÜV / MOT / Inspection: new Errors and prior sale excepted! = Further information = Year of construction: 2017

Condition: new, Huber Mobile Chiller / Chilled Water Unit / Process Chiller Huber CS 550 OD High-performance mobile chiller with air-cooled refrigeration unit, circulating pump and extensive accessories For sale is a like-new mobile chiller / chilled water unit from the manufacturer Huber. The unit has not yet been used. The unit is suitable for industrial process cooling, machine cooling, chilled water supply and for general industrial cooling and temperature control applications. Technical data: Manufacturer: Huber Type: CS 550 OD Equipment type: Mobile Chiller / Chilled Water Unit / Process Chiller Item No.: 32-100110 Year of manufacture: 11/2023 Made in Germany Cooling capacity according to nameplate: 55,000 W at +10 °C supply temperature and +50 °C return temperature Temperature range: -20 to +85 °C Internal temperature sensor: Pt100 Temperature stability at -10 °C: 2 K Heating capacity: 17 kW Cooling capacity at 20 °C ambient temperature: at +15 °C: 70 kW at +10 °C: 60 kW at 0 °C: 33 kW at -10 °C: 20 kW at -20 °C: 12 kW Power connection: 400 VAC / 50 Hz (3Ph+N+PE) Power consumption: 27.5 kW Max. power consumption: 52 A Pump: CM5-4 Max. flow rate: 125 l/min Max. delivery pressure according to nameplate: 4.0 bar Pump connection: G1 external thread Min. filling volume: 160 l Low level warning volume: 175 l Max. filling volume: 195 l Refrigerant: R449A Refrigerant filling weight max.: 23 kg Max. operating pressure: 28 bar Interface: RS232 Safety class: I / NFL Protection class of electrical components: IP54 Min. ambient temperature: -20 °C Max. ambient temperature: +50 °C Dimensions: approx. 1400 × 1000 × 1800 mm (W × D × H) Net weight: approx. 715 kg Sound pressure level: 79 dB(A) ± 4 dB(A) Equipment: Air-cooled refrigeration unit Circulating pump Atmospherically open tank Copper-soldered evaporator Digital level indicator Highly efficient fan motor Feed pump with integrated over-temperature protection Manual bypass valve Control unit B400 / RB400 Capacitive user interface with OLED display Multi-colored status indicator RS232 interface Separate operating / control panel Connection / cable according to images Temperature control / connecting hoses according to images Various connection fittings according to images Additional accessories according to images Movable unit housing on rollers Application areas: Industrial process cooling Machine cooling Production plants Chilled water supply Temperature control applications Outdoor installation Winter operation Scope of delivery: 1 × Huber CS 550 OD Mobile Chiller / Chilled Water Unit 1 × separate operating / control panel Connection / cable according to images Temperature control / connecting hoses according to images Various connection fittings according to images Several Huber accessories according to images 3 × accessory boxes with the contents shown Additional accessories according to images Wooden transport box Condition: Like new Never used Year of manufacture 11/2023 Optical condition according to images Accessories partially original packaging or in accessory boxes The table shown in the photos and other items not explicitly mentioned are not part of the sale. Expedited shipping is possible. Subject to changes, errors and prior sale. Prodpezt Iqzsfx Adloc We are happy to answer any further questions by phone.

Condition: excellent (used), I am offering for sale a professional Unitek Benchmark laboratory chiller/recirculator. This unit is designed for cooling and maintaining a constant temperature of liquids in laboratory systems, measuring devices, lasers, medical equipment, and other systems requiring a cooling circuit. The housing is made of coated steel, and the tank is a durable construction resistant to the effects of cooling fluids. Technical data: Manufacturer: Unitek Benchmark Stock No.: 043008 Serial No.: LJ080297F Power supply: 230 V AC Current: 3.1 A 1 phase Frequency: 50/60 Hz Podjz Sndlopfx Adlsrc Condition: Used. Very good visual condition. Sold in the exact condition as shown in the pictures.