Used Pva Industrial High-Temperature Furnace for sale (47,808)

Condition: used, Year of construction: 2010, functionality: fully functional, temperature: 1,700 °C, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, Excellent Condition: Used High-Temperature Vacuum Furnace PVA TePla COV 733 RS Condition & Terms of Sale: Please note: The furnace is being sold strictly on an "AS IS, WHERE IS" basis directly from our warehouse. The furnace was professionally dismantled from a working cleanroom environment. All wiring and connections are carefully labeled for easy reassembly by the buyer. For full transparency: Two internal graphite heating elements were damaged during the dismantling process and will require replacement. Otherwise, the equipment is 100% complete and ready for immediate relocation. You are highly encouraged and welcome to physically inspect the equipment in our warehouse near Białystok, Poland, prior to purchase. ##### Tedpfx Aezkwp Iocneb Equipment Overview: Furnace chamber made entirely of stainless steel, double-walled for water-cooling. Horizontal design for easy loading and unloading and good accessibility for maintenance and service. Internal graphite box for precise guidance of process gases. Equipped with post-cleaned graphite components. Automatic control of the entire process sequence. Usable batch chamber (Width x Height x Length): 840 x 815 x 1000 mm. Total length of the graphite box: approx. 1100 mm. Maximum operating temperature under partial pressure: 1500 °C. Under vacuum: 1700 °C. Temperature uniformity: ± 10 K. Temperature fluctuation in steady state: ± 5 K. Process pressure range: 1×10-2 < p < 1040 mbar. TECHNICAL SPECIFICATIONS COV 733 RS Operating temperature: max. 1700 °C Max. load dimensions: 840 x 815 x 1000 mm Useful volume: approx. 685 L Temperature uniformity: ± 10 K Power supply: 3 x 400 V (50 Hz) Max. permissible voltage fluctuations: ± 5 % Installed heating power: max. approx. 190 kW Pump station - Final pressure in an empty, clean, and cold furnace: < 1×10⁻² mbar - Electrical power of the pump station: approx. 14 kW Leak rate: < 5×10⁻³ mbar·L/s Cooling water - Cooling water flow rate: approx. 150 L/min - Cooling water temperature: 20 ≤ TCW ≤ 30 °C - Cooling water pressure: 2 ≤ PCW ≤ 4 bar Cooling water quality requirements according to specification: PW 800 943 ND. Gas supply: Compressed air: for valve actuation (PVA) 4 ≤ PVA ≤ 5 bar A compressed air maintenance unit must be provided by the Customer. Nitrogen: Gas inlet pressure (PN2) 5 ≤ pN2 ≤ 7 bar Hydrogen: Gas inlet pressure (PH2) 5 ≤ pH2 ≤ 7 bar Space requirements - Width x depth x height to be determined in consultation with the Customer - Floor area to be determined in consultation with the Customer Foundation: level ground, no special preparations required.

Condition: excellent (used), High temperature debinding furnace, make GERO Tjdpfxohgiz Io Acnsb type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: used, heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar Tjdjv Sbc Eopfx Acnsb exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: new, High temperature chamber furnace, make VEI Tsdedyvkyepfx Acneb max. temperature: 1.200°C useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW

Condition: used, Used pallet racking systems from SSI Schäfer are among the most popular solutions for efficient and secure warehousing. This heavy-duty racking system is ideal for warehouses, industrial facilities, and logistics operations that require stable and durable racking for Euro pallets. The proven PR600 design offers high load capacities, flexible configurations, and reliable daily performance. Purchasing pre-owned means getting tested brand quality at an attractive price—available immediately from stock for new installations, conversions, or extensions of your racking system. Customizable: The racking frames (frame types P100 / P120) can be modified to your desired height—precisely and professionally in our workshop. We supply tailored racking solutions for any warehousing requirement. PRODUCT DETAILS - Height: approx. 750 cm - Depth: approx. 105 cm - Length: approx. 3090 cm - Shelf load: 3,000 / 3,500 kg (depending on configuration) - Bay width: 270 cm (3 × EPAL) Tjdpfxezxf U Ij Acnjb - Beams: 270 cm, type INP100 or CE110 (box profile) - Beam color: Blue - Frame type: P100 / P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 165 incl. floor spaces - Model: Used SSI Schäfer PR600 - Availability: available immediately from stock, multiple units in stock SCOPE OF DELIVERY: - 12 × frames approx. 7.50 × 1.05 m, galvanized, pre-assembled - 88 × beams approx. 270 cm (INP100 or CE110) - 176 × safety pins Price: €3,744.00 net €4,455.36 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarding company – shipping costs depend on postal code - Professional assembly and disassembly by trained teams available on request - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding, customized quotation—tailored to your specifications. Whether new installation, conversion or extension—we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit our showroom! On site, you can get a comprehensive overview of our pallet racking, storage racks, and other solutions. Many systems are assembled and ready to view. Our expert consultants are available to assist with questions and provide personalized advice—we look forward to your visit! Still haven’t found what you’re looking for? Visit our website for a quick overview of many offers and item variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. Our phone number can be found on our company profile. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will call you back as soon as possible.

Condition: used, Used pallet racking systems from SSI Schäfer are among the most sought-after solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses as well as industrial and logistics companies that require sturdy and long-lasting racking for storing Euro pallets. The proven PR600 design offers high load capacity, maximum flexibility, and is perfectly suited for storing goods with high weights. Buying used here means you get certified brand quality at a highly attractive price – immediately available for new construction, redesign, or extension of your existing racking system. Individually adaptable: The frame uprights (Type P120) can be refitted to your desired height – professionally and precisely in our workshop. We deliver tailor-made racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 490 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load: 3000 / 3500 kg (depending on variant) - Bay width: 270 cm (fits 3 × EPAL pallets) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam color: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 2 - Pallet spaces: 45 incl. floor positions - Design: Used SSI Schäfer PR600 - Availability: Immediately ex-stock, multiple units available INCLUDED IN DELIVERY: - 06 × frames approx. 4.90 × 1.05 m, galvanized, pre-assembled - 20 × beams approx. 270 cm (INP100 or CE110) - 40 × safety pins Price: 1080.00 € net 1285.20 € gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery throughout Germany by our partner freight company – freight costs dependent on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether for new builds, reconfiguration, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us at our showroom! On site, you can get a comprehensive overview of our pallet racks, storage racks, and further solutions. Many systems are assembled and can be experienced directly. Our specialist advisors are available for any questions and individual consultations – we look forward to your visit! Tedpozxfaqsfx Acnjb Haven’t found what you’re looking for yet? Visit our website for a quick overview of many offers & variants of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, from 08:00 to 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and secure warehousing. This heavy-duty racking system is ideal for warehouses, industrial, and logistics operations that require robust and durable storage racks for Euro pallets. The proven PR600 design offers high load capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used in this context means: tested brand quality at a particularly attractive price – available immediately for new installations, conversions, or extensions of your existing racking system. Customizable: The racking frames (type P120) can be adapted to your desired height – precisely and professionally in our workshop. We deliver tailor-made racking solutions for every storage requirement. PRODUCT DETAILS: - Height: approx. 490 cm - Depth: approx. 105 cm - Length: approx. 3090 cm - Shelf load: 3000 / 3500 kg (depending on configuration) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, type INP100 or CE110 (box profile) - Beam color: blue - Frame type: P120, galvanized, pre-assembled - Levels: floor + 2 - Pallet spaces: 99 including floor positions - Version: Used SSI Schäfer PR600 - Availability: immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 12 × frames, approx. 4.90 × 1.05 m, galvanized, pre-assembled - 44 × beams, approx. 270 cm (INP100 or CE110) - 88 × locking pins Price: €2,232.00 net €2,656.08 gross You will receive an invoice including VAT. DELIVERY, INSTALLATION & INSPECTION: Tsdpfx Acjzxd Umeneb - Nationwide delivery throughout Germany via our partner carriers – freight costs depend on postcode - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quotation tailored to your specific requirements. Whether for new builds, conversions, or extensions – we offer professional advice for your racking configuration. SHOWROOM: You are very welcome to visit our showroom! On site you can get a comprehensive impression of our pallet racking systems, storage racks, and other solutions. Many systems are assembled and can be experienced directly. Our specialists are available to answer your questions and provide personalized consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 8:00 am to 4:00 pm. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), Door glass present Interior dimensions: Width: 340 mm Tjdjyk Et Nopfx Acnsb Height: 355 mm Depth: 360 mm Rated temperature: 500° C

Condition: new, High-temperature resistant corrosion protection and temperature-resistant special electrode Manufacturer: Capilla Type: 521 E HL Diameter: 2.5 mm Tedpjhhykiefx Acneb Length: 350 mm Weight: 5 kg

Condition: used, Year of construction: 2018, Manufacturer: ONI, Model: TCW90 Plus, Year of manufacture: 2018, Serial No. 18026, Heating capacity: 18 kW, Cooling capacity: 164 kW, MC control system +++ Attention: This unit is part of an online auction! +++ Tjdpfxezn Anqo Acnsb

Condition: ready for operation (used), Brand: HERAEUS Tsdpfx Aey Nlfdocnjb Maximum temperature: 1200 °C Internal furnace dimensions: 390 x 200 mm, depth: 650 mm

Condition: like new (used), Year of construction: 2021, High-performance industrial imager Manufacturer: DATALOGIC Model: AV500-258W Year of manufacture: 2021 Condition: used (lightly used) FEATURES • 5 MP image sensor, 32 FPS • Patented dynamic or adjustable focus system for extended depth of field • Continuous, blink-free white illumination • Region-of-interest windowing for higher frame rates • Next-generation decoding algorithm for outstanding decoding performance with 1D, 2D, stacked, and postal symbologies • Gigabyte Ethernet and SyncNet high-speed connectivity • PackTrack feature for closer item spacing • Image storage in various formats from full resolution to highly compressed JPG • Datalogic's patented "Green Spot" technology for visual good confirmation • Dual laser targeting for easy installation • Browser-based e-GENIUS interface compatible with all operating systems and hardware platforms, including PCs and Tablets • Extremely industrial-grade: IP65 for harsh environments with operating temperatures from 0 to 50°C Todpfx Aswbg Drjcneb Communication Interfaces: 2 Ethernet TCP/IP, 2 serial ports, Internal communication interfaces System SyncNet technology Connection modes: Master/Slave, Ethernet point-to-point Programming method: e-GENIUS multilingual, browser-based, integrated HTML web server interface The AV500 reader sets a new optical standard for unattended data capture solutions with an industry-leading 5-megapixel CMOS sensor, 32 frames per second image capture, dynamic or adjustable focus, and various lens options. With its wide field of view and excellent depth of field thanks to various dynamic focus options, the AV500 barcode reader is the ideal choice for smart track logistics solutions, baggage handling systems, and smart distribution applications in retail.

Condition: like new (used), Edwards Edwards iXH4545H – Industrial High Vacuum / Dry Pump For sale is an Edwards iXH4545H, version MK1 HV MM96 Black EMS. This unit originates from a technical company environment and is part of Edwards’ high-performance iXH series, which is used globally in industrial high vacuum and coating processes. Technical Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Specifications (iXH Series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas & configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typical 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Tsdpfx Acozixyfensb Description: The Edwards iXH4545H is an industrial high vacuum/dry pump from the 4500 series. It is typically used in: • PVD / CVD coating • Semiconductor industry • Process chambers / vacuum furnaces • Research & development • High gas load applications • Chemical/corrosive process gas environments The iXH series is renowned for its high reliability, robust construction, and 24/7 operational capability. Weight: approx. 890 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 070079A, total height: 4,500 mm, total length: 5,400 mm, total width: 5,500 mm, pressure: 6 bar, control cabinet height: 2,000 mm, control cabinet length: 2,500 mm, control cabinet width: 500 mm, operating temperature: 25 °C, working height: 950 mm, heating capacity: 107 kW (145.48 HP), number of seats: 66, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, emergency stop, Giardina high-bay dryer, manufactured in 2007 equipped with three different climate zones: evaporation zone – heating zone – drying zone Fitted with explosion-proof components, making it suitable for use with water-based and solvent-based paints Tedszcnu Hopfx Acneb Mobile pallets with conveyor belts, eliminating minimum size requirements for components Continuous vertical conveyor system

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Tjdpfxefy Txyo Acnob Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Todsfz Anpepfx Acnjb 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. Todpfx Acofz U Tqsnob It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: used, Year of manufacture 2007 Connection 400 V 16 A CEE 5.5 kW 630 m³/h Functional video available. Tjdpfxsy Ec T Ds Acneb

Year of construction: 2010, condition: refurbished (used), Vacuum furnace for heat treatment of metals with a molybdenum chamber. A high vacuum of 10^-6 mbar is achieved in the furnace. Maximum operating temperature 1300 C. Todpfjn Snx Hsx Acnsb Dimensions of the working chamber: 0.35 x 0.42 m diameter x height. Molybdenum heating chamber. Closed circuit cooling system with a buffer tank Pumping system with a mechanical and turbomolecular pump. Ability to perform processes: • Annealing in high vacuum • Stress relief • Vacuum brazing • Vacuum brazing • etc. The stove is 100% functional after modernization. Sales with installation and commissioning at the customer's place. The final price depends on the scope of modernization, agreed individually with the client. If you have any questions, please contact us.

Condition: as good as new (ex-display), Vacuum drying cabinet Internal dimensions: 700 x 700 x 600 mm (depth) Heating output: 3 kW Tjdpfxefbl T Nj Acnob Temperature range: 1-120°C External dimensions: 1280 x 950 x 1280 mm Pressure range: Atmospheric pressure - 0 bar (not suitable for overpressure) A suitable vacuum pump will be supplied depending on the application. Power supply: 3-phase, N, PE, 400V, 50Hz, CEE plug The internal components can of course be completely removed!

Condition: good (used), Nabertherm High-Temperature Furnace 1600 °C The HT 04/16 - HT 450/18 high-temperature furnaces have proven themselves in the laboratory and in production for many years. Tedpfx Acowxwa Eonsb Whether for quartz glass, glass-ceramics, the sintering of CIM components, or other processes up to a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction and compact, floor-standing design, these high-temperature furnaces are ideal for laboratory processes that require the highest precision. Excellent temperature uniformity and sophisticated details set unsurpassed quality standards. Tmax 1600°C Double-walled housing construction with fan cooling, resulting in low outer wall temperatures Heating from both sides via molybdenum disilicide heating elements High-quality fiber insulation with special backing insulation Side insulation, constructed from tongue-and-groove blocks, ensures low heat loss to the outside Durable ceiling insulation with special suspension Parallel swing door with chain guide for defined opening and closing of the door Labyrinth seal ensures minimal temperature loss in the door area Exhaust air vent in the furnace ceiling Heating element control via thyristors NTLog Basic for Nabertherm controller: Recording process data via USB stick Maximum temperature: 1600°C Internal dimensions (mm): 200x200x200 External dimensions (mm): 830x370x590 Volume (L): 4 Connected load (kW): 5.2 Electrical connection: 3-phase Weight (kg): 150 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, High-pressure industrial water pumps – 90 kW – 55 bar – 33 m³/h Available: No. 2 high-pressure multistage industrial pumps for water lifting, complete with three-phase asynchronous electric motor and installation base. The pumps are from a snowmaking plant and are in good overall condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical data Pump: Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multistage pump Mounted on skid with flexible coupling Electric motor: Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Equipment supplied: - Industrial mounting base - Motor-to-pump flexible coupling - Complete assembly ready for installation - Identification nameplates present Typical applications: - Industrial water pumping stations - Pressurization systems - Process plants - Fire-fighting systems - Artificial snowmaking plants - Industrial washing installations Tedpfx Aoytgvwecneb 2 identical units available.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 101 kW (137.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 796 kg, input voltage: 400 V, total width: 1,180 mm, total length: 2,760 mm, total height: 1,810 mm, warranty duration: 12 months, Aircooled chiller CLIVET WSAT XEE 402 101 KW Cooling capacity: 101 kW / 28.72 tons (12/7 — 35°C) Year of manufacture: 2025 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Сopeland ZP293KZE-TED-456 (scroll) + 1 pcs. Сopeland ZP182KCE-TFD-455 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.76x1.18x1.81 m. Weight: 796 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS Tedpfx Acezxqmconeb The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 493 kW (670.29 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,626 kg, input voltage: 400 V, total width: 2,200 mm, total length: 6,660 mm, total height: 2,450 mm, warranty duration: 6 months, Aircooled chiller CIAT LDH 1800V STD 493 KW Cooling capacity: 493 kW / 140.18 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Copeland ZP385KCE-TWD-522 (scroll) Type of refrigerant: R410а Number of fans: 8 pcs. Hydraulic module: 1 pcs. water pump (twin) WILO DL80\160-11\2, expansion vessel, buffer tank. Dimensions: 6.66x2.2x2.45 m. Weight: 6626 kg. Working hours: 20974/19470/19396/19427 h.h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Tedpjzxqk Ijfx Acneb The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2013, functionality: fully functional, cooling capacity: 642 kW (872.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 9,590 kg, input voltage: 400 V, total width: 2,400 mm, total length: 7,000 mm, total height: 2,400 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA FX FC NG SL T+ S 2702 642 KW Cooling capacity: 642 kW / 182.5 tons (12/7 — 35°C) Year of manufacture: 2013 Options: Hydraulic module. Freecooling. Heat exchanger for refrigerant subcooling with coolant. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer CSH8583-125CVY-40D (screw) Type of refrigerant: R134A Number of fans: 14 pcs. Hydraulic module: 1 pcs. water pump Grundfoss NB65-125 (Freecooling) + 1 pcs. Grundfoss TY50-120 (Freecooling) +Grundfoss TY50-120 (Heat exchanger for refrigerant subcooling with coolant) 2 pcs.. Expansion vessel. Dimensions: 7x2.4x2.4 m. Weight: 9590 kg. Working hours: 4904/9813 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; Todpfxozxqc Rs Acneb - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.