Used Poreba Lathe For Gas And Oil Pipes for sale (23,707)

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm Chedpfx Asy Sf Azji Noa • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Year of production: 1991 Chedpfx Aoyuu Scei Noa Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: used, Cylinders, bottles used for gas transport 20/40/50 L, 200/300 bar T50 steel gas cylinder, bottle 50 L 200 bar 288 pieces T40 steel gas cylinder, bottle 40 L 200 bar 288 pieces Cjdpfx Aieyfpg Ne Neha T23 steel gas cylinder, bottle 20 L 300 bar 288 pieces All bottles are complete, empty and ready for export.

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Chjdpfsg Atrvjx Ai Nja

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Complete factory equipment for sale: weaving, embroidery, dyeing, finishing, and processing. Many more machines are available. Textile Department * Jacquard Weaving: 11 × Picanol looms, Model 2004, XC 870 (Belgian) * Air-Jet Jacquard Weaving: 8 × Picanol looms, Model 2004 XL * Air-Jet Jacquard Weaving: 6 × Picanol looms, Model 2004, 5400 Jacquard Bonas, Jumbo * Complete set of air compressors, dryers, and air tanks required for operating the weaving machines. * Dobby Weaving: 4 × Picanol Omni looms, Model 1999 * Air-Jet Dobby Weaving: 8 × 2004 looms, 2.5 m working width, suitable for producing linen, gabardine, and dress fabrics (Picanol Omni Plus) * Rapier Weaving Machines (Chinese): Model 2014 – 4 units * Modern Warping Machine: 720 / 11 cones – 1 unit * Karl Mayer Weaving Machines: Model 2021 – 4 units * Karl Mayer Weaving Machines: Model 2017 – 2 units * Sizing Machine: 3 units ⸻ Embroidery Department * Saurer Epoca Embroidery Machines: 4 machines, equipped with 5 special attachments * Spooling/Winding Machines: Belinda – 9 units * Spooling/Winding Machines: Barmag – 1 unit, Kaltema – 2 units * Complete set of air compressors, dryers, and air tanks required for operation. * Mouline Thread Production Line with all accessories (embroidery threads). ⸻ Finishing Department * Rams: 1 × Brückner, 6-chamber, with Mahlo, Model 2002 * Stenters: 3 Turkish Damson machines * Fabric Inspection Machine: 1 unit * Sewing Machines: 30 units * Fabric Pressing and Packaging Machine ⸻ General Factory Utilities * Industrial Chillers: 2 units * Steam Boiler: 6 tons, Riello burner, 2018 * Steam Boiler: 0.5 ton * Fabric Dyeing Jet Machine: 50 kg * Yarn Dyeing Machine (Hank): 600 kg * Yarn Dyeing Machine: 2 × 300 kg, complete with winding and unwinding system * Hydro Extractor: 1 for yarn + 1 for fabrics + 1 for hanks Cedpfjziz Dyex Ai Neha

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. Chsdpjzix Atjfx Ai Nsa The line includes: Decoiler Feeder Perforating press - 1,200 mm width 2 punching dies: Die 1: 3×300 (2 mm hole diameter) Die 2: 1×1,200 (3 mm hole diameter) Pull-through cutting table Recoiler

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Summa 1400 FME-p” production system Item for sale: 1 x Summa 1400 FME-p Chedpjzb Aktsfx Ai Noa Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re welcome to contact us directly.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: TCG 160 x 5M, turning diameter over cross slide: 1,280 mm, spindle bore: 105 mm, turning diameter: 1,600 mm, disc diameter: 1,600 mm, LATHE AVAILABLE FROM STOCK The heavy double-guide lathe TCG is a universal machine tool that allows roughing and finishing turning, drilling, threading, turning cones, boring, heavy and very heavy objects with one clamping. The TCG lathe is a lathe for machining objects with diameters of 1600 mm. The construction system and rigidity of the structure allow turning with large chip cross-sections and ensure high smoothness with minimal ovalization of the workpiece. The machine is located in our company ZAK in Poręba ul. Zakładowa 2 (Poland) Cedpfx Aevw Uu Ssi Njha We encourage you to submit inquiries.

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN EU registration. Year: 2011 Volume: 50,25 м3 Vacuum certificate We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen Codpjtulh Iefx Ai Neha We will be glad to answer your questions via Phone and E-mail

Condition: excellent (used), Year of construction: 1986, Cryolor gas tank semi trailer for oxygen, nitrogen, argon cryogenic, carbon dioxide, LIN, LOX, LAR,CO2 Manufacturer: Cryolor, France Csdpfx Ajwmmakji Nsha Year of Manufacture: 1986 Type: EFM 17000 Total Capacity: 17,410 liters Tare Weight: 10,050 kg Gross Weight: 22,000 kg Working Pressure: 20 bar Test Pressure: 27.32 bar Tank Code: R 27.3BN Insulation: Vacuum insulated The tank is for the transport and storage of deep-cooled liquid gases such as nitrogen, oxygen, argon, or CO₂. Contact us for more information or to arrange a viewing.

Condition: excellent (used), Year of construction: 1990, Aurepa gas tank semi trailer for oxygen, nitrogen, argon cryogenic Technical Information: Cjdpjittfnefx Ai Njha Working pressure: 3 bar Pump: yes Flowmeter: yes We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us via e-mail.

Condition: excellent (used), Year of construction: 2004, Gofa semi-trailer cryogenic for nitrogen, argon, oxygen, LIN, LOX, LAR. Year: 2004 Working pressure: 3 bar Volume: 12000 L We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide. Cjdpfork Na Aox Ai Neha We will be glad to answer your questions via phone and e-mail

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Chjdpoq Nx Alofx Ai Nsa Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: new, Press brake tool/upper punch for Weibrenner press brake Codpfx Aji Hbbyoi Njha

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Cedpfx Aioya I Iue Njha Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: used, Cryogenic gas tank semi-trailer CRYOBASE used for liquid oxygen, nitrogen and argon Capacity: 24 m³ Date of first registration: 29.09.2025 Pump, flow meter, vaporizer, vacuum insulation. New technical inspection (HU), vacuum and leak test. Chjdpfoznb Nyex Ai Noa We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: excellent (used), tank capacity: 600 l, We can offer you an argon, nitrogen, oxygen, carbon dioxide and nitrous oxide tank: O2,N2,CO2,N2O pallet tank Manufacture: AGA CRYO Volume: 600 litres; Working pressure: 17,5 bar We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane Csdpfsvdb A Nex Ai Nsha We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 150 kg, Equipment: type plate available, Weishaupt WM-GL 10/3-A ZM-T, power output 110-1000 kW. 3 units available. Chsdpfx Aozcg Hzsi Nsa Year of manufacture: 2010 Burner power regulation: gas – modulated oil – 3-stage Gas path of the burner: maximum supply pressure 500 mbar (gas paths for other supply pressures available upon request) The burner is equipped with a DMV 525 gas valve, an FRS 520 stabilizer, and a 520/1 filter. Flame tube extended by 100 mm (we also have WM-GL 10/3 burners without extension). Fuel type: natural gas, LPG, light fuel oil. Burner power output in the range of 110-1000 kW. Burner control unit: WFM 54 + AGM module Electric motor 1.5 kW / 380V. CE certificate + complete burner documentation (manual + burner electrical diagram). QRA 2 photocell. The burner is in good working order and complete, having undergone a comprehensive inspection. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee 100% functionality of the burners we sell. We also have other burners and spare parts for all Weishaupt burner models available for sale.

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Chedpfsh Uyg Njx Ai Noa

Condition: used, - Type: Professional deck oven - 5 decks × 3 chambers - 15 openings - Energy source: Triple fuel – gas/wood/diesel - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm - Condition: Almost new, used only for commissioning and ignition tests - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth Cjdpfozhk Rmsx Ai Neha - Controls: Manual adjustment - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Condition: good (used), Year of construction: 1970, spindle bore: 105 mm, turning diameter over bed slide: 1,600 mm, turning length: 8,000 mm, total length: 13,210 mm, total width: 2,420 mm, total height: 2,400 mm, bed width: 1,100 mm, rotational speed (max.): 224 rpm, overall weight: 33,000 kg, workpiece weight (max.): 25,000 kg, Centre lathe POREBA - TCC160 MACH-ID 8822 Make: POREBA Type: TCC160 Year: 1970 Work load supported 2 steady 25.000 Kg Work load not supported 16000 Kg incl. 4 Chuck 1600 mm incl. 2 x Steady rest Csdpfjzcm Rmsx Ai Noha incl. internal grinding attachment incl. external grinding attachment incl. milling saddle support DBC Turning Length: 8000mm Swing over bed Ø: 1600mm Swing over cross slide Ø:1250mm Spindle bore: 105mm Spindle power: 55kW Bed width: 1100mm Tailstock spindle Ø: 220Ø Stroke pinole: 600mm Spindle taper: Metric 80Mk Speeds / ranges: 224Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 5000mm/min. Workpiece load: 25000 Length: 13210mm Width: 2420mm Height: 2400mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Tank gas truck cryogenic used for oxygen, nitrogen, argon, LIN, LOX, LAR Truck BDF/ADR MAN year 2018 410.000 km Tara 8913 kg Generator Tank container AGA 11 m3 3 bar Tara ca 5000 kg High pressure Sefco pump Flow-metter + printer New vacuum test Codexu D Sqopfx Ai Noha New tank test New technical inspection New ADR We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: excellent (used), Cryogenic gas tank truck, suitable for liquid oxygen, nitrogen and argon (LIN, LOX, LAR). Vehicle Truck: MAN, BDF / ADR configuration Year of manufacture: 2013 Mileage: 241,751 km Tare weight: 9,128 kg Tank / Body: Tank container: AGA Cryo, vacuum insulated Capacity: 10 m³ Cjdjypi Hkspfx Ai Neha Working pressure: 2 bar Product compatibility: liquid oxygen (LOX), liquid nitrogen (LIN), liquid argon (LAR) Equipment: Sefco pump Flow meter with printer Condition / Approvals: New technical inspection New ADR inspection We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: excellent (used), Year of construction: 2013, MAN gas tank ADR truck used for carbon dioxide CO2 Truck BDF/ADR MAN year 2013 606.000 km Tara 8705 kg Cedpfx Aisyanhzj Njha Tank for CO2 Pump Flow-meter Only for export from EU We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail.

Condition: new, empty load weight: 9,600 kg, Year of construction: 2026, Gas tank semi-trailer for CO2 Carbon dioxide New gas tank semi-trailer for CO2 Carbon dioxide Manufacturer: CRYOBASE GmbH Chsdpfxjymza De Ai Nja Volume 23 m3 Working pressure 22 bar Pump Tare weight 9600 kg First registration: year 2026 We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail