Used Peter Markl Gmbh Bottle Filler for sale (69,610)

Condition: used, functionality: fully functional, A used Holdefleiss bottle filling and capping machine, type 12/3. The machine has been set up for 0.5l Euro and 0.33l long-neck bottles, including HDE. The machine is supplied without a pre-evacuation system and features long-tube filling valves. The filling valves will be newly resealed. Both a leakage test and a pressure test will be performed. Djdpfx Aljyycude Ajku

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2016-08-30, total length: 2,100 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 2,500 kg, CONGDA 16/16/6 Counter-Pressure Filling Machine – up to 3,500 bottles/hour For sale: a CONGDA 16/16/6 bottle filling machine, manufactured in 2016. The machine underwent a complete overhaul in April 2026, which included replacing bearings, seals, springs, and other wear parts. In addition, the machine has been technically improved in several areas since it was put into operation. During this process, various original components were replaced with high-quality parts from European manufacturers. Dodpfez Nlcxjx Al Aoku Technical specifications - Manufacturer: CGET (China) - Year of manufacture: 2016 - Configuration: 16/16/6 (rinsing / filling / capping) - Filling system: Counter-pressure filler - Filling capacity: Up to 3,500 bottles per hour, depending on factors such as carbon dioxide content and temperature - Bottle format: Set for 33 cl Longneck bottles - Weight: Approximately 2,500 kg - Documentation: Technical documentation available Complete overhaul in April 2026 In April 2026, the machine underwent an extensive technical overhaul. During this overhaul, the following parts, among others, were replaced: - Bearings - Seals - Springs - Various other wear parts Additional technical improvements Since it was put into operation, the machine has been further optimized in several areas. Various original components have been replaced with parts from European manufacturers. The most important improvements are: - Replacement of the vacuum pump - Replacement of all sensors - Installation of a digital pressure gauge on the filling bowl - Replacement of various parts of the rinser - Replacement of the capping dies - Various other technical improvements As a result of these modifications, the machine has been technically improved in several key areas compared to its original configuration. Additional items included The machine comes with a comprehensive package of extra parts, including: - Various chain conveyor parts - Large quantity of spare parts - Extra seals - Springs - Filling tubes - Various other technical parts and wear parts Asking price: €34,900,- excluding VAT Location: Breda More information, photos, and videos are available upon request.

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  - Type: Isobarometric filler for bottles and cans - Capacity: 8,000 bottles / hour (depending on format) - Number of filling valves: 20 - Formats:  - Bottles: 0.33 L Longneck and 0.75 L Cava - Cans: Standard 0.33 L and 0.44 L - Counter-pressure filler - Running direction: left - right - Dimensions (L x W x H): 2.0 m x 1.8 m x 2.5 m - Operating History: Djdpfx Alot Rmhmj Aeku - In operation: June 2021 – June 2024 - Last production run: June 2024 - Dismantled: February 2025 - Estimated total working hours: approx. 625 hours (~500,000 liters filled at 2,500 units/hour) - Good condition, ready for reinstallation.

Condition: used, Year of construction: 2021, AVE UNIBLOCK 16/16/4 Bottle fillers." However, I can suggest common features found in similar bottle filling machines, which may include: - Filling Type: Gravity, Pump, or Gravity/Pump combination. - Production Rate: Typically measured in bottles per hour or minute. - Number of Filling Heads: In this case, it could refer to a 16-head system, meaning it can fill 16 bottles simultaneously. - Bottle Size Range: Specifications may include the range of bottle sizes the machine can handle. - Control System: May involve PLC (Programmable Logic Controller) for operations. Dedpjz Hrnhefx Al Ajku - Material Construction: Stainless steel or food-grade materials suitable for hygienic applications. - Dimensions and Weight: Overall dimensions and weight for installation considerations. - Power Requirements: Voltage and power consumption details. Bottle Sizes: 250 ml, 500 ml, 1 Litre , 2 Litre Cap Size: 38 mm Capacity: 6000 bottles per hour on 1 L Stations: Rinser , Filler and Caper Condition: Excellent

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs Djdpfx Aou I N Npsl Aoku - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Condition: used, Year of construction: 2006, operating hours: 4,000 h, functionality: fully functional, Used wine bottling line. Djdpfx Aley Uiido Aeku Complete wine bottling line comprising the following machines, all manufactured in 2006: - Filling monoblock for the used wine bottling line: * AVE brand filler, Model: OCEANIC G 24/24/6 * Filling volume: 0.75L - 2L, with a filling rate of 5000 bottles/hour * AROL type 6-head corking machine * AROL type 3-head PET capping machine - Used capsule applicator: * AVE type, 4 heads, maximum speed 6000 bottles/hour. Formats: 0.75L - 1.5L - Used labeling machine: * AVE type, 3 stations. Formats handled: 0.75L - 2L - Used glass unloader, AVE type * 16 units - Furthermore, the line includes: * Nordson type case erector, case filler, and case closer machines * S.G.E. type palletizer, manufactured in 2002/06 - AVE type 16-track bottle washing machine - Conveyor belt, approximately 60 meters long.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar. Dodpfox Dbkcjx Al Ajku

Condition: used, Manufacturer: Krones Model: VK2V 050-113-KK10 Capacity: 19,000 bottles/hour Equipment: Beer in 0.5 l glass bottle Year of manufacture: 1991 Feeding system: Bloc Direction of operation: right to left Filler: VK2V 050-113 Filler pitch: 113 mm Filling stations: 50 units Execution: Height adjustment of filling bowl, automatic bottle shards rinsing, mechanical filling system, bottle shower, HDE Capper: Crown capper 10-113 Execution: Height adjustment of capper head Dedpfxeyzhkye Al Ajku

Condition: used, Year of construction: 1994, Combined bottle filler with labeller ‘Krones Bloc’ Additional title: Monobloc arrangement Capacity: 7000 bo/h Power: 38,1 KVA Current: 55 A Voltage: 230/400 V Frequency: 50 Hz Formats: 0.5 litre NRW (belly/neck/back), 0.33 litre Steinie (belly/back), 0.33 litre Longneck (belly/neck/back) Running direction: left -> right Operation / Control: Siemens S 5 Position: free standing Features: Labeller Universella Periphery: miho inspection device Dedpfx Alexb Ahwo Ajku

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces Dkedoz I Tktjpfx Al Aeu • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 Dedpfx Aon D Hm Sol Ajku L: 4.000 mm, W: 2.700 mm, H: 2.800 mm

Condition: used, Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown Dkjdpferxuwkjx Al Aeu capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRWbottles, direction: left->right.

Condition: used, Year of construction: 2021, Gravimetric short-tube glass bottle filler with 16 filling valvesand crown cork capper. Controlled via Eaton PLC. Additional title: gravity filling and crown cork capping Capacity: 2800 bo/h max. filling volume capacity 2,200 l/h Power: 4,5 kW Voltage: 380 V Frequency: 50 Hz Dksdpfxsxbpchj Al Aju Compressed air: 14,4 Nm³/h, 5 - 6 bar, 8 mm connection Length: 2,30 m Width: 1,42 m Height: 2,50 m Weight: 1800 kg Formats: Longneck 0,33 l, Vichy 0,33 l, Steinie 0,33 l, Belge 0,75 l - crown corks 26 mm Operation / Control: SPS Eeton Features: 16 filling valves, 1 capping head, beer connection clamp DN32

Condition: used, Year of construction: 1990, Bottle filler for approx. 8000 bottles/h Additional title: Filling and capping machine Capacity approx.: 8000 bottles/h Formats: 0.5 l Euro bottle, 0.33 l longneck bottle, 0.5 l goiter neck bottle Position: free standing Dsdpfx Aew S T H Tol Aeku Features: 1 pre-evacuation, short tube filling, crown cork capper

Condition: used, Bottle filler for mineral water, manufacturer KHS / SEN, model: VVF-90-KK16-SV16, equipped with 90 filling valves, 16-head crown corker, and 16-head screw capper, capacity: 35,000 bottles/h, for 0.7 l GDB / 0.25 – 0.75 l Gastro / + 0.5 l NRW bottles. Dedpoyzhicjfx Al Aeku

Condition: excellent (used), functionality: fully functional, REF: MM5465 1 x Seitz-Werke GmbH filling machine for bottles. Fed by counter-pressure tank. Manufacturer - Seitz-Werke GmbH Model - SF 12. Date of manufacture - 1961 (has been refurbished since). Speed - up to 1200 bph (depending on filling volume). Capacity - variable filling range (whatever bottle size fits into holders). Dedpfx Alsx A A I He Ajku Overall dimensions - 1100mm diameter x 2350mm H. Last used in March 2023.

Year of construction: 2022, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21-120004/A, These are two silos with ATEX certification and a volume of 15 m³, designed for handling difficult, lightweight bulk materials with a density of up to 300 kg/m³, or for lower filling levels with higher densities. The silos are fully equipped with a filter at the silo head and a discharge screw at the outlet, also equipped with a filter and a rotary valve. The special feature lies within – a screw conveyor running along the bottom, rotating slowly to keep the material moving. Filter cartridges are included in the scope of supply. Dedpfxez Nkt Ns Al Ajku Interfaces: Filling – Flange at the silo Discharge – Conveyor screw with filter and rotary valve These are two silos – the package price is 15% lower than the stated individual price of a single silo.

Condition: used, Year of construction: 1984, with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply to the filling vessel by vacuum blower. For filling, the bottles are first lifted via a hydraulically controlled bottle carrier and pressed against the sealing cone on the filling valve. The valve sleeve moves as far as it will go in the valve body, opening the product outlet. The air inside the bottles is discharged through an air tube, creating a vacuum in the bottle equivalent to the vacuum above the product level in the container. The product flows into the bottles by gravity until the fill level reaches the air tube. The bottle is then lowered and the product outlet is closed. Additional title: hot filling Capacity of filling line: 5000 bo/h Number of filling valves: 24 pcs Length: 1,64 m Width: 1,20 m Height: 2,10 m Formats: Round bottles, diameter 60 - 92 mm, height 100 - 265 mm Running direction: left -> right Dkodew Tmmvspfx Al Aeu Features: 24 filling valves from stainless steel, height adjustment, vacuum blower

Condition: used, Filler, manufacturer: KHS / H+K, type: Delta VVF 90/16, rated output up to 38,000 bph, operated at 24,000 bph, with 90 filling valves, with double pre-evacuation, vacuum pump, high-pressure injection, motorized height adjustment, with CIP caps, residual liquid control before filler infeed, with 16-head crowner including crown cap feeder, running direction: left to right, year of manufacture: 1982, retrofitted with new S7 control system in 2004. Dodpjyzhqtofx Al Aeku

Condition: used, Year of construction: 1991, Bottle filler, manufacturer SEN, type Combi-RE H2, with 30 filling stations and 6-digit crowner, set up for 0.5 l + 0.33 l NRW Longneck + 0.5 l EURO bottles, running direction: left to right, discharge table, various spare parts, S5 control, incl. operating manual, year of manufacture 1991, already dismantled. Djdpfxoyzhmuj Al Ajku

Year of construction: 2026, condition: new, The filler is made of stainless steel (AISI 304). The storage tank is located on top of the filler and can be connected directly to a pasteurizer using the DIN 25 connection. The electrical control unit is mounted on the side for easier operation. The bottle filler and the bag-in-box filler are connected to each other via two separate valves and can be used together or separately. Bag-in-box filler: semi-automatic model IBB 200, with stainless steel induction liter counter. Filling system without gravity. Volumetric pump 1.1 KW with flexible EPDM impeller. Touch screen operation for cycle setting, parameters and cleaning. Vacuum and nitrogen injections are freely adjustable in the cycle. The built-in air compressor ensures continuous operation. Technical data: Bag in Box Electrical requirement: 1.1 220V 50-60 Hz Suitable for: Ø 20 - 25 mm Capacity: 5 L/h 240 pcs. Capacity: 10 L/h 180 pcs. Capacity: 20 L/h 130 pcs. Collection tank capacity: 1500-1800 kg/h Dimensions: 600x820x1600 mm Dkedpfx Ajtpxuvol Aeu Weight: 120 kg Filling system without gravity Capacity of the collection tank: 45 L Capacity: 670 L/h Dimensions: 580x1800x1500mm Weight: 45 kg Take a look at our website!

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s Dodpfez Iww Rex Al Aeku • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, Year of construction: 2002, A counter-pressure filler for glass bottles, featuring a total of 40 short-tube filling valves and a capping machine for crown caps. The bottles undergo a double pre-evacuation prior to the filling process. Additional title: Counter-pressure fillers with short-tube filling valves Capacity: 12000 bo/h referring to 0.5 litre bottles Power: 13 kW Current: 18,75 A Voltage: 230 / 400 V Frequency: 50 Hz Dedpozg I H Aefx Al Asku Machine partitioning: 125 mm Running direction: left -> right Operation / Control: Simatic S7-300 Position: in auf Füßen stehendem Edelstahlgehäuse Base construction: Carousel-type machine Features: 40 short-tube filling valves, 10 capping heads for crown corks, protective enclosures with doors, control cabinet

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning, rotary valve airlock, silencer, frequency inverter, control cabinet/controller, and extensive ductwork. Dsdpfxsz Ikzpo Al Aeku The dust extraction system was operated inside the production hall, and the cleaned return air was fed back into the production area. The filter system is labeled with H1 and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial No.: 000909 Airflow rate: 10,500 m³/h Filter area: 62.5 m² Weight of the filter system: approx. 1,600 kg Filtration: surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter unit: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is separately rated with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency inverter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary valve airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of blades: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Capacity: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: The system includes: - Silencer, connection Ø 400 mm - Return air duct to the production hall - Complete system control - Danfoss frequency inverter - Automatic pneumatic filter cleaning - Rotary valve airlock - Extensive galvanized dust extraction and return air ductwork Large parts of the existing pipelines can be taken over after consultation. The system is still in its assembled condition. This allows the installation, duct routing and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Removal by: July 31, 2027 at the latest The system is sold in its current assembled condition. Dismantling, removal, loading and transport are entirely the responsibility of the buyer and at their own expense. If sold abroad, transport, export/import and customs duties will also be borne by the buyer. Inspection possible by appointment. Sale as is, without warranty. Selling price: 15,500.00 EUR Price net, any applicable taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Djdpfx Aljz Ixc Is Aoku