Used Peddinghaus Tool for sale (36,834)

Condition: good (used), Punch, punching machine, hole punch, eccentric punch Bodpsk D Nt Dofx Anmowr -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm -Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Bedpfx Anozqbmdjmswr Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: ready for operation (used), Offered is a combined Peddinghaus section shear with punch unit for punching, shearing and notching flat bar, sections and bar stock. Punching force: approx. 80t, punching capacity: 31mm in 20mm steel, throat depth: 510mm, max. round bar diameter: 50mm, max. square bar size: 45mm, max. angle iron dimensions X/Y/Z: 140mm/140mm/13mm, weight: approx. 3400kg. An on-site inspection is possible. Bsdpfxszrhhdj Anmjwr

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Bwjdpfezrby Tex Anmor Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: good (used), Stop, depth stop, length stop for press brake, bending machine, guillotine shear..., electric stop for profile steel shear, contact length stop -Manufacturer: Peddinghaus, electric stop contact length stop for profile steel shears flat steel shears -Stop head, tiltable, swiveling -Hole: Ø 50 mm Bwodpfx Anjznkr Demsr -Transport dimensions: 440/270/H155 mm -Weight: 6.4 kg

Condition: good (used), Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press, quick-change punch holder -Stamp holder: Stamp holder -Hole: Ø 30 mm -Hole spacing: 94x63 mm / Ø13 mm, see photos Bwodjznkldspfx Anmjr -Dimensions: 120/90/H135 mm -Weight: 4.2 kg

Condition: good (used), Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg Bjdpfxezniqxj Anmjwr

Condition: used, PEDDINGAUS Type: 210/20 EXCELLENT CONDITION Bwedpfx Ans Dv Nnomsr

Condition: like new (used), TOOL FOR ROAD BARRIERS Bwsdshylzrepfx Anmor LENGHT 6000mm

Condition: used, Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø30 x 258 mm -Dimensions: 310/100/H125 mm Bsdpfx Anozm I A Djmowr -Weight: 4.6 kg

Condition: used, Punching tool, punch, stripper, hold-down Bwjdpszm Iy Njfx Anmsr -Scraper: Hold-down device for dies -Hole: Ø27/33 x 257 mm -Dimensions: 360/105/H135 mm -Weight: 5.0 kg

Condition: used, Machinetype: Shear / Bar shear Manufacturer: Peddinghaus YOM: 2001 - Rebuild 2011 by Schubert Controls: Siemens S7-300 PLC with 8" MP277 touch panel Bwodpfx Anszp Nuyomor Shearing force: 2000kN Strokes per minute: 48 Max. Diameter: 63mm Automatic length adjustment Driven material feed table - 7m long Main drive: 30kW Total weight: aprox. 9tons Includes large collection of knives

Condition: used, Manufacturer: TOOL TEMP Bwsdpfx Anoylaatomer

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Tool-temp TT-137 Tool Tempering Unit, 2018, heating: 12 kW, temperature: 140°C Bwsdpfxezab S Hj Anmjr Stock: 3 units

Condition: used, Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Bwjdjzmwnpjpfx Anmjr Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T

Condition: good (used), punching pressure 60.0 t punching cross-cut in cmm 31 in 15 mm square edge steel 40.0 mm L-beam 160 x 80 mm flat steel 400 x 16 mm throat 400 mm round bar steel 40.0 mm total power requirement 5.5 kW Bwedpfx Aszkbnnsnmor weight of the machine ca. 1.950 kg dimensions of the machine ca. 1700 x 1050 x 1980 mm good / well-maintained condition (!!) Features: - Stop / support table at the punching station - Support table at the notching station - Flat steel blade, 375 mm long, with four cutting edges, - also for cutting angle iron at 45° - Material support table with stop bar on the flat steel shears - Section steel blade for cutting 90° angle steel as well as round and square steel - Scraper, swiveling - Square notching device with stop table - 2 foot switches and electrical controls - Connector for external engagement - Integrated hydraulic power unit - Three-phase motor, 400 volts, 50 Hz - Various insert tools such as punches and dies

Condition: used, Triangular notching tool, notching side knife, die holder, parting tool, punching tool, punch, punching die, punching die Bwsdocwn Eyepfx Anmor -Punching Tool: Angle Notching Tool -Remark: only counter knife, without release unit -Dimensions: 185/172/H95 mm -Weight: 9.3kg

Condition: used, Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 97 mm -Dimensions: 220/335/H115 mm -Weight: 32 kg Bjdpfx Anoc Nlyxjmowr

Condition: good (used), Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, Lever shear, sheet metal and round steel shear type 3R 4 -Steel sheet: up to 4 mm -Round steel: up to 11 mm -Lift-down device: -Overall dimensions: 295/125/H865 mm -Transport dimensions: 690/125/H310 mm Bwsdpsibirzsfx Anmjr -Weight: 11 kg

Condition: good (used), Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, lever shears, sheet metal and round steel shears -Steel sheet: up to 7 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -Lift-down device: -Overall dimensions: 480/210/H1360 mm Bwodpfx Aeibriionmor -Transport dimensions: 1070/210/H470 mm -Weight: 41 kg

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm Bjdpjddfh Eefx Anmswr -Wingspan: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: used, Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: Long hole type S27-40 -Hole: Ø 40 mm -Dimensions: 300/150/H250 mm -Weight: 12.4 kg Bedpfx Askx Sr Hjnmewr

Condition: good (used), Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press -Stamp holder: with slotted punch tool, without die -Socket: Ø 51 mm / Bolt circle Ø 110x18 mm see photos Bsdpex Idm Refx Anmewr -Punch tool: Slotted hole 22.5x50 -Dimensions: Ø 135 x 180 mm -Weight: 6.7 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 Bwodpfex Nnnbox Anmor -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, sheet metal shears -Manufacturer: Peddinghaus sheet metal and round steel shear type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Blade length: 150 mm -Lever arm with: safety spring -Quantity: 1x lever scissors available -Price: per piece -Dimensions: 275/100/H1180 mm Bedsfgi Nqjpfx Anmswr -Weight: 11 kg/pc.