Used Pcr Pcr Max Alpha for sale (24,760)

Condition: used, This listing is for PCR Max Alpha Thermal Cycler The unit is in full working condition and ready for immediate use Compact and efficient thermal cycler designed for accurate DNA amplification. Features intuitive controls, uniform temperature distribution, and dependable cycling performance suitable for molecular biology workflows. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Crodpfxey Hw Sks Ailod Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Codpfoxzgw Aox Ailsrd Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Dimensions: Weight 250 lb. Depth 28.5 in. Height 37 in. Width 29.7 in.

Year of construction: 2008, operating hours: 30,000 h, condition: ready for operation (used), Automation equipment manufactured in 2008. This KOMAX Alpha 433 L system is designed for the automatic processing of cables, including cutting, stripping, crimping, and welding. It includes a Komax ADS 123 wire storage unit, safety enclosure, extraction system, and various crimping and processing modules. If you are looking to get high-quality cable processing capabilities, consider the KOMAX Alpha 433 L machine we have for sale. Contact us for further details. Komax ADS 123 (Wire Storage Unit) • Manufacturer: Komax France • Power Supply: 3 × 400 V (3P+N) • Frequency: 50–60 Hz • Maximum Power Consumption: 5,500 VA • Air Pressure: 4–6 bar Cosmotec Cooling Unit • Manufacturer: Cosmotec • Model: XVA36 03 320 • Frequency: 50/60 Hz • Current: 0.51 A Schunk KM-CFK-564MF (Welding Module 1) • Manufacturer: Schunk • Model: KM-CFK-564MF • Year of Construction: 2012 • Rated Power (50% Duty Cycle): 120 kVA • Rated Primary Voltage: 500 V • Rated Frequency: 1000 Hz • Supply Power: 43 kVA • Secondary Working Current (50% Duty Cycle): 15.6 kA • Secondary Short-Circuit Current: 120 kA • Secondary Open-Circuit Voltage: Up to 8 V • Electrode Force: 31–187 daN • Weight: 180 kg Schunk KM-CFK-564MF (Welding Module 2) • Manufacturer: Schunk • Model: KM-CFK-564MF • Year of Construction: 2012 • Rated Power (50% Duty Cycle): 120 kVA • Rated Primary Voltage: 500 V • Rated Frequency: 1000 Hz • Supply Power: 43 kVA • Secondary Working Current (50% Duty Cycle): 15.6 kA • Secondary Short-Circuit Current: 120 kA • Secondary Open-Circuit Voltage: Up to 8 V • Electrode Force: 31–187 daN • Weight: 180 kg Scope of the system: • Komax Alpha 433 L fully automatic machine • Komax ADS 123 wire storage unit • Safety enclosure • Extraction system (AAT 260) • Operating computer and control unit • Various crimping and processing modules, optional • Further optional accessories available upon request Cedszg Hm Uepfx Ailerd Used for: • The system is in working order and has been used for the automatic processing of cables, including cutting, stripping, crimping and welding • All systems are currently still powered and fully functional • Approximately 30,000 machine hours

Year of construction: 2007, condition: ready for operation (used), A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only. Csdpfx Aszi Eimsilerd

Condition: used, functionality: fully functional, power: 3 kW (4.08 HP), grinding belt width: 120 mm, grinding belt length: 6,900 mm, grinding height: 1,100 mm, height adjustment type: electric, grinding belt speed: 20,000 mm/s, total height: 1,460 mm, total length: 3,560 mm, total width: 1,270 mm, overall weight: 464 kg, Equipment: documentation/manual, Mini Max NK-L 55-CH long belt sanding machine Crsdezik Sajpfx Ailod Very space-saving, used long belt sanding machine / universal belt sanding machine from Mini Max, model NK-L 55-CH. The table can be folded down and is motor-adjustable in height. This allows even larger furniture parts to be sanded directly. Unlimited sanding is possible in terms of length, as the table is movable. The machine features a special sanding shoe worth approximately CHF 800. In addition, a total of 15 new sanding belts with grit sizes from 80 to 220 are included in the scope of delivery. The machine is still in operation and can be inspected by appointment.

Condition: used, axle configuration: 3 axles, Year of construction: 2020, Year of manufacture: 2020 Rear axle 1: Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 30% Credszhxa Aopfx Ailjd Rear axle 3: Steering; Tyre profile left: 50%; Tyre profile right: 50% Empty weight: 11.900 kg Carrying capacity: 36.100 kg GVW: 48.000 kg

Year of construction: 2019, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm Codpfx Aiezf A Ifolsrd • Operating mode: Pulsed • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms • Pulse frequency: Single pulse up to 100 Hz • Welding spot diameter: 0.2–2.0 mm • Focusing objective: 150 mm (further lenses per lens data sheet) • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm • Lowest working point: 530 mm • Highest working point: 1590 mm • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition

Condition: used, Year of construction: 1998, turning diameter 850 mm turning length 2000 mm turning diameter over slide rest 690 mm control Siemens type 840 C Cooling through the spindle 23 bar centre height 450 mm spindle diameter in front bearing 200 mm spindle hollow 128 mm power capacity 60 kW turning speeds 7-1800 U/min Torque 7908 Nm workpiece weight 4000 kg tailstock quill diameter 160 mm tailstock quill taper MT 5 3 jaw chuck Forckrath 600 mm Tool changer 60 work piece power 30 kW turning speeds 56-3000 U/min weight of the machine ca. 18 t dimensions of the machine ca. 6,3x2,4x3,3 m The machine has been completely overhauled. Capto C6 milling chuck Double prism lathe chuck The machine has many optional accessories that can be purchased separately. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Codpfeyqv Anjx Ailord apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Wittenstein alpha SP 180X-MC1-7-0M1-2K planetary gearbox, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Crjdpfey S Nmkjx Ailsd

Condition: ready for operation (used), Alpha SPG 060-MF1-7-00/060S02 gearbox 20009454, serial number: 1159634, used, in good overall condition, 100% functional, scope of delivery as per photos. Credpfx Aiox Dtxfslod

Condition: ready for operation (used), Alpha SPG 75-MF1-7 gearbox SN: 203771 - 6000 rpm, used, in good condition, fully functional, delivery scope as per photos. Crsdpfx Aisy Nn Hkoljd

Condition: ready for operation (used), Wittenstein alpha SP 100S-MF1 gearbox, 36.9 Nm, 600 rpm, 29A, used, minor signs of wear, fully functional, delivery as shown in photos. Cedpfx Aiox Dwi Isljrd

Condition: new, Catalogue No.: HZ014 – Pre-milling – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Codpfxoza Emhs Ailjrd Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 Csdpfxey D I I Rj Ailjrd 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,540 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,160 mm, color: red, Year of construction: 2019, Equipment: ABS, 1 x lift axle 3 x steering axles. Radio remote steering. Hydraulic ramp. Camera. = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Tire tread depth left inside: 50%; Tire tread depth left outside: 50%; Tire tread depth right inside: 50%; Tire tread depth right outside: 50% Rear axle 2: Dual tires; Steered; Tire tread depth left inside: 30%; Tire tread depth left outside: 30%; Tire tread depth right inside: 30%; Tire tread depth right outside: 30% Rear axle 3: Dual tires; Steered; Tire tread depth left inside: 40%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40% Rear axle 4: Dual tires; Steered; Tire tread depth left inside: 60%; Tire tread depth left outside: 60%; Tire tread depth right inside: 60%; Tire tread depth right outside: 60% Weights Unladen weight: 11,344 kg Payload: 54,656 kg GVW: 66,000 kg Maintenance APK (technical inspection): valid until 02/2027 Financial information Price: Upon request Identification Credpozcuxrefx Ailjd Model number: N/A F-S44 / STEERING AXLE - LIFT = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki We make every effort to provide accurate information; however, no rights can be derived from the information provided.

Condition: new, For sale: Robust, precision industrial coupling from the renowned Japanese brand C-max / Fuji Seiko Co., Ltd. Model: 51288015900 Production date: 17.01.2006 The coupling is intended for use in CNC machinery, drive systems, industrial automation, spindles, and rotary axes. Equipped with a four-point mounting flange and sleeve mounting with locating balls. ⸻ Technical data: • Outer diameter: 81.03 mm • Flange diameter (bolt hole spacing): 63.04 mm • Total length: 52.96 mm • Inner sleeve diameter: 31.46 mm • Locating element with groove: 50.75 mm ⸻ Manufactured from high-grade steel, stored as warehouse stock – condition very good, minimal storage marks. Original manufacturer's packaging with Japanese label. Crodpfxow Rdvij Ailod /////Price per piece/////

Year of construction: 2025, condition: used, functionality: fully functional, Max Rebar Tying Machine RB 443T — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Cjdpfxsy A Hais Ailjrd Price EUR 1,850 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2024, condition: used, Max Akku-Baustahl-Bindegerät RB 611 T — Year of manufacture 2024 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Cjdpfx Asyz Uqtjilsrd Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - The product image shows a comparable unit in new condition — the actual condition varies depending on duration of use - On-site inspection in 37574 Einbeck available by appointment Price EUR 1.990 plus VAT | EXW Einbeck | Delivery on request

Condition: used, axle configuration: 3 axles, first registration: 07/2023, total width: 2,550 mm, total height: 900 mm, Year of construction: 2023, Rear axle 1: Double wheels; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 2: Double wheels; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 3: Double wheels; Steering; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Empty weight: 9.728 kg Crjdozbaq Repfx Ailjd Carrying capacity: 39.772 kg GVW: 45.000 kg Registration number: 018502 Total length 1260 cm long Bed 840 cm Extendable 450 cm

Year of construction: 1982, condition: excellent (used), Manufacturer: STRIFFLER Model: 2766 Year of manufacture: 1982 Dimensions: approx. 0.8 x 0.8 x 1.2 m Csdpofdxd Eofx Ailjrd All information is provided without guarantee. A demonstration can be arranged in our showroom at any time.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete bottle sorting, filling and capping system, previously used for 1L bottles. This system comprises of: 1 x Elevator for caps. Discharge height - 2020mm H. Overall dimensions - 2150mm L x 1120mm W x 23500mm H. 1 x Lazy Susan bottle sorter on height adjustable feet. 1 m diameter. Overall dimensions - 1700mm L x 1250mm W. Credpfoy Upbtsx Ailjd 1 x Alpha Pack Europe srl / Intamac filling and capping system with cap sorting bowl, used for up to 1L bottles. Model - 9888L-2. Serial no. - 20210115. Date of manufacture - 2021. Was filling 1L wine bottle shaped PET bottle. Caps - applying 39mm diameter cap. Belt - 190mm wide. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 3.5 kW. Air pressure - 6 bar. Overall dimensions - 2750mm L x 1900mm W x 2000mm H.

Condition: used, Cut Max Guillotine Type: GM-1 Efficiency: 1500 kg/h Operating temperature: up to -20°C Machine dimensions: 2100 x 900 x 1850 mm Cedpfx Asy Ega Ujiljrd Made of stainless steel Power supply: 3x400V 50 Hz Weight: 550 kg Condition: used/overhauled/ready to work

Condition: used, Year of construction: 2002, Additional title: crate packer Capacity for plastic crates: 500 cycles/h Power: 11 kW active power/ 15 kVA apparent power Cedovcq Acjpfx Ailord Voltage: 230/400 V ± 5 % Frequency: 50 Hz ± 2 % Length: 4170 mm Width: 2550 mm Height: 2650 mm Weight: 4300 kg Formats: Max. height: product: 360 mmm, plastic crate: 380 mm, cardbord box: 500 mm Features: 2 heads à 20/24 bottles, construction with T-flange table quick hitch, only work with glas bottles, incl. filled crate inspector, Krones Checkmat

Condition: excellent (used), Year of construction: 2014, operating hours: 11,065 h, functionality: fully functional, machine/vehicle number: 03001212-03.14, The ALPHA LASER ALM 200 laser welding machine was manufactured in Germany by Alpha Laser GmbH in 2014, but it has been in operation since 2017. This mobile laser welding machine is equipped with a 200 W laser source (9kW laser beam power), enabling the repair and modification of various components such as dies, molds, injection molds, tools, and machine parts in any selected location. Welding is performed in a semi-automatic mode. The mobile laser welding system features a narrow laser head, allowing access to the interior of the welded component. It is controlled via a computer, joystick, and foot switch. The machine is in very good technical and visual condition and has been regularly serviced. The machine comes with a table. Price: 170,000 PLN net (VAT invoice provided). Technical parameters of the ALPHA LASER ALM 200 laser welding machine: Cjdpfotqtrfjx Ailjrd – Power: 200 W – Wavelength: 1064 nm – Travel speed (X, Y, Z): 0-25 mm/s – Travel range (X, Y, Z): 140 x 120 x 1300 mm – Pulse energy: 90 J – Pulse duration: 0.5-20 ms – Pulse frequency: 100 Hz – Laser beam power: 9 kW – Laser beam diameter: 0.2-2.0 mm – Operating mode: Pulsed – Focal length: 150 mm – Power consumption: 380 V/ 50-60 Hz / 16 A/8kW – External dimensions: W-1410 x D-730 x H-1585 mm – Machine weight: approx. 320 kg – Operating hours: 11065 – Serial number: 03001212-03.14 Additional parameters and equipment of the ALPHA LASER ALM 200 laser: – Optics: LEICA microscope mount, 10x magnification, optionally 16x – Display with keyboard – Multifunctional foot switch – Joystick – Adjustable laser arm – Complete workstation with table – Option to purchase spare parts for the machine and accessories at a good price, e.g., lamps, hoses, wire guide holders, spheres/bases for parts, magnets, etc. – Option to purchase various types of welding wires at good prices – Option to purchase a fume extraction system

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: L705226, functionality: fully functional, TECHNICAL DATA Manufacturer: Baron Max Model: KL-2680 Year: 2007 Serial Number: L705226 Control Unit: Fagor 8055TC WORKING CAPACITY Swing over bed: 670 mm. Center height to bed: 335 mm. Center height to top cross slide: 205 mm. Swing over cross slide: 400 mm. Dis. Between centers: 2100 mm. Width of bed: 450 mm. HEADSTOCK Spindle nose: A1-11 Spindle bore: 305 mm. Bar capacity: Ø 105 mm. Range of spindle speeds: 3 rang Gears Auto Shifting Spindle speeds range: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Taper in spindle: MT#6 SADDLE Longitudinal travel (Z-axis): 2000 mm. Cross-slider travel: 450 mm. Size of tool holder: Boring Tool: Ø 40 mm. O.D. Tool & Facing Tool: 25 mm. Ball screw (Dia x pitch): X-Axis: Ø25 mm. x P 5 mm. Z-Axis: Ø50 mm. x P 10 mm. Credpfxovai Swo Ailed TAIL STOCK Quill diameter: Ø105 mm. Quill travel: 220 mm. Quill taper: MT#5 ENGINE Spindle motor: 20HP Z-axis drive motor: 12 Nm. (FKM 44.3) X-axis drive motor: 6.3 Nm (FKM 42.3) Coolant pump motor: 1/4 HP X, Z-AXES FEED X axis rapid travel: 6 M/min. Z axis rapid travel: 8 M/min. GENERAL Power Required: 20 KVA. Floor space (L x M x H): 4090x1950x1820 mm. Approx, machine weight: 4700 Kgs. EQUIPMENT Coolant system Manual 4-way tool post 4 Jaws Self-centering scrolling chuck Ø 12". Steady rest