Used Pall Gmbh Cold Sterile Filtration for sale (70,846)

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Gedpfx Akevcqx Djyekc Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Year of construction: 1995, condition: used, This filter system may only be used to filter preclarified products that have normal filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Gsdpfxovcqv Ne Akyskc Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: used, Without plug Godpfxoz Sdrlj Akyekc

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning Gjdsz Ikzpjpfx Akyekc - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Condition: used, This listing is for a Pall Scientific lm50NCN-B4N Laboratory Filtration System The unit is in full working condition and ready for immediate use This laboratory filtration system is a high-quality lab instrument manufactured by Pall / Pacific Scientific (Model: lm50NCN-B4N). An industrial-grade filtration housing/system designed to provide reliable contaminant removal in bioprocessing or research applications. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Gedpfszuf Uysx Akyekc Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for a Pall Allegro 1/2" Single Use TFF System. The unit is in full working condition and is ready for immediate release. This Unit is fitted with a Ismatec Flowmaster FMT 300 peristaltic pump. This unit is supplied with Trolley and containers. The Pall Allegro 1/2" Single Use TFF System is a cutting-edge solution designed specifically for tangential flow filtration (TFF) in bioprocessing applications, combining innovative single-use technology with user-friendly design. Unlike traditional TFF systems, the Allegro system incorporates new concepts that enhance ease of use and efficiency, featuring a carefully considered layout that allows full access to components from one side. Key Features: Single-Use Design: Eliminates cross-contamination and cleaning requirements, enhancing system flexibility and ensuring a sterile environment. Gsdpfx Aoxxyfzekyokc Integrated Sensors: Equipped with single-use sensors that track key process parameters, provide notifications for out-of-spec conditions, and enable automated control for optimal processing. Easy Setup: Comes with five pre-irradiated manifold sets (feed, retentate, permeate, bio container, recovery) that are ready for installation, typically taking just 20 minutes. Automated Operation: Fully automated for monitoring and controlling critical parameters, ensuring consistent performance throughout ultrafiltration and diafiltration processes. Technical Specifications: Capacity: Features a recirculation pump with a capacity of 1,000 L/hour, designed to accommodate 0.5 - 2.5 m² cassettes running at a crossflow of 5 L/min/m². Versatile Connections: Easily connects to Allegro 2D and 3D bio containers for WFI, diafiltration buffer, and process fluid in fed batch operations. Temperature Control: Includes a heat exchange plate under the retentate bio container to manage product temperature, either cooling or heating as needed. Applications: Ideal for concentration and diafiltration of proteins, recombinant molecules, potent biological drugs, cytotoxic drugs, and vaccines, the Pall Allegro system stands out as a reliable and efficient choice for modern bioprocessing needs.

Year of construction: 2011, condition: used, Build volume including build platform: 250x250x325mm, laser type: Yb fiber laser (ytterbium), 1x 200W, 1x 400W, manufacturing process: metal powder bed fusion (DMLS/SLM), precision optics: F-theta lens, high-speed scanner, max. scanning speed: 7m/s, variable focal spot diameter: 100-500µm, power supply: 32A, connected load: 8.5kW, nitrogen generator: integrated, compressed air supply pressure: 7,000hPa, volume flow rate: 20m³/h, argon supply pressure: 4,000hPa, volume flow rate: 100l/min, length: 2,200mm, width: 1,070mm, height: 2,290mm, min. recommended installation space: 4,800x3,600x2,900mm, weight: 1.325t, operational hours counter: 1138h, both lasers must be configured or initialized before operation. On-site inspection is possible. Gedoz R Uxgepfx Akyjkc

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm Gjdpfxjz I Tkto Akyjkc • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: excellent (used), Huber & Ranner Air Handling Unit (AHU) For sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The unit was used as a recirculating air unit for a paint booth and is in excellent, clean, and professionally maintained overall condition. The system controls the complete air climate (filtration, cooling, humidification, and air supply) and is ideally suited for production halls, paint shops, wood or metal processing, and large-scale industrial projects. Technical data of the complete system: Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / Size: X-CASE 15 (System Reference: SPK ULA) Order Number: 19 0090 Z / P.010 Volume Flow / Air Capacity: 31,000 m³/h The modular components in detail: High-performance fan module: Motor power: 30 kW Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: 55 A Max. frequency: 49.7 (54.4) Hz Integrated cooling coil (cooler): Cooling capacity: 50 kW Material: CU / AL (copper/aluminum) Refrigerant: R134a Highly efficient filter stage: Filter class: F9 / Standard (fine dust filter for the highest air purity) Filter type: TM 9U635A10-1 (Quantity: 9 pieces) Recommended final pressure: 250 Pa Humidifier & droplet separator module: For precise regulation of humidity, including an integrated droplet separator to prevent moisture transfer into the air duct. Gjdpfxjzrmcts Akyekc "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Machine: Temperiertechnik GmbH SES Erhitzungsanlage Gkedpfx Asz Sdmcekysc

Year of construction: 2022, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21-120004/A, These are two silos with ATEX certification and a volume of 15 m³, designed for handling difficult, lightweight bulk materials with a density of up to 300 kg/m³, or for lower filling levels with higher densities. The silos are fully equipped with a filter at the silo head and a discharge screw at the outlet, also equipped with a filter and a rotary valve. The special feature lies within – a screw conveyor running along the bottom, rotating slowly to keep the material moving. Filter cartridges are included in the scope of supply. Gjdpfxjz Nkt No Akyokc Interfaces: Filling – Flange at the silo Discharge – Conveyor screw with filter and rotary valve These are two silos – the package price is 15% lower than the stated individual price of a single silo.

Year of construction: 1990, condition: used, A Pall cartridge filter housing for beer filtration is available. Filter cartridge positions: 19, cartridge length: 30in or 40in, adaptor code: 7, permissible operating pressure: 10bar, permissible operating temperature: 140°C, vessel volume: 136L. Included are 10 stainless-steel blanking plugs for the filter cartridge sockets and three Kieselmann ball valves. An on-site inspection is possible. Godpfx Aoz A Anwjkyokc

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: Gsdpfx Akoz Iww Rjyekc 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN Godpoykrtpofx Akyskc The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 16274986/1, functionality: fully functional, Multiripsaw for edging boards, max cutting height 125 mm, max passage 950 mm, el.power 75 kW Gsdoz N Tfuopfx Akyskc operating panel, conveyors

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. The pipes remain almost completely dry and free of coarse contamination. Godpfx Akjzw Ukcsyskc The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest changeover times in non-cutting separation Material-saving and free of contaminants Chip-free Easy to maintain No cooling and lubricating agents required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and custom engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Sturdy machine table with T-slots for workpiece clamping Matching base frame Wired hand control unit Extraction system on the machining head Spraying device 750 W high-frequency spindle kit for the IQ series according to the order confirmation from November 2017 The machine was purchased in December 2016. Its excellent condition and low usage with only approx. 500 operating hours are particularly noteworthy. Godpfx Ajz D Htgskyokc Price: net 12,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Gksdpoz Rn Dnefx Akyec

Condition: used, Year of construction: 1988, machine/vehicle number: 112 009 00, Na sprzedaż sprawna maszyna przemysłowa renomowanej niemieckiej marki Ramisch Kleinewefers GmbH (rok prod. 1988, nr fabryczny: 112 009 00). Gkjdpfxszz Iz Ns Akyjc W zestawie znajdują się dwa dodatkowe, duże wałki (cylindry) na zmianę/wymianę, co pozwala na dostosowanie maszyny do różnych procesów i materiałów. Stan techniczny: Maszyna w pełni sprawna, w dobrym stanie, gotowa do pracy. W zestawie: Kalander + 2 kompletne wałki wymienne (np. o innej twardości, strukturze lub powłoce). Zastosowanie: Przemysł tekstylny, wykończalnictwo tkanin, obróbka włóknin, gładzenie, prasowanie, embossing/tłoczenie lub przetwórstwo tworzyw sztucznych. Jakość: Solidna, ciężka, zachodnioniemiecka konstrukcja (Made in Western Germany).

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Gedpez Ixc Iofx Akyskc

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD Year of manufacture: 2001 Completely refurbished optically in 2024 and 2026 Gedpfx Aezkhzhjkyokc Last calibration: 11/2023 Measuring range: X = 900 mm, Y = 1800 mm, Z = 700 mm In excellent technical and optical condition Device features, equipment: C99 control unit with operating panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine, 17-position Probe changing plate, 20x Probe accessories Calibration sphere Reference probe HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software QS-Stat option Calypso upgrade and other options possible Further accessories and options possible Available on short notice

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Godezilz Nepfx Akyskc Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Year of construction: 2025, condition: used, Pall Emflon PFR 30” Filter - 1 of 19 available Unused and in Original Packaging Godpfx Aoxv Azyokyjkc Expiry date 23rd Feb 2026 hence the price Overview & Purpose - The Emflon® PFR / PFRW filter cartridges from Pall are sterilizing‑grade hydrophobic PTFE membrane filters designed for air and gas (vent & compressed gas) sterilization applications. +2 - They are used to provide a sterile barrier by removing microorganisms (bacteria, phages) and particulates from gas streams that contact sensitive process equipment or product. +2 - The filters are designed for repeated use, in situ steam sterilization, and validation / integrity testing

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Gksdpjziaqfsfx Akyec

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Gsdpfx Aoznz Ezekyekc Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.