Used P&D 4P-Tcf for sale (69,010)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Tjdoyhcabopfx Amrsc Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2001, operating hours: 126,000,000 h, condition: good (used), machine/vehicle number: 204750, Perfecting 2/2 - 4/0 CPC 1-04: Off Press Ink & Register Control Alcolor Dampening Semi Automatic Plate Change Todpfx Amolml Nhjroc Grafix Alphatronic 200: Powder Sprayer Technotrans Cooling Device Automatic Ink Roller Washing Device Blanket Washing Device Staticstar Compact: Antistatic Device Impression Account: 126 Mio.

Condition: used, Year of construction: 2017, Blast Cabinet with Extraction System Blast Cabinet: Manufacturer: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Extraction System: Manufacturer: Gläsner Plant No.: 5V 3028 055 Tjdpfeyddufox Amrec Voltage: 400 V Frequency: 50 Hz Power: 2.2 kW The blast cabinet is sold together with the extraction system. Purchasing individual components separately is not possible. Inspection is available by appointment.

Condition: used, Year of construction: 2010, functionality: fully functional, cooling capacity: 172.5 kW (234.53 HP), type of input current: three-phase, overall weight: 481 kg, input voltage: 400 V, Equipment: type plate available, Güntner table-top recooler with two fans. Description as per the attached data sheet. Multiple units available! Todpfx Ajy Dipcemrjc

Condition: good (used), Year of construction: 2011, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 P duoBlock Year of construction: 2011 Control system: Heidenhain iTNC 530 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 800 mm Main spindle: Max. spindle speed: 18,000 rpm Rotary table: Table diameter: d 900 x 700 mm Tedpoz Ebzuofx Amrsc Tool changer: Tool holder: HSK-A63 Number of tool positions: 60 Operating hours: approx. 49,285 h Spindle hours: approx. 15,380 h Technical features & accessories: - Universal milling head with controlled B-axis - Coolant tank 500 l - Internal coolant supply 40 bar - Chip conveyor with integrated fabric band filter - Rotating viewing window - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Signal tower, 4 colors - Flushing gun - Cooling system with compressed air through the spindle center - Electronic handwheel (if available) - Operating mode 4 Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 540029, Heidelberg Speedmaster 70 x 100 cm - 4 colors - Format: 70 x 100 cm - Approximately 400 million impressions - Serial number: 540029 - CP Tronic - CPC 1.04 Tsdpfx Amozd R Hyoroc - Alcolor dampening system - Autoplate - Preset - Cocking - Fully automatic washing systems - 2/2 reversal (perfector) - Decurler - Powder spray unit

Condition: repair required (used), Year of construction: 2002, operating hours: 20,300 h, For sale: Manufacturer/Type: Deckel Maho, DMU 60 P hi-dyn, 5-axis machining center Year of manufacture: 2002 Information: Tool changer for 60 SK 40 tool holders, Mill Plus control system Current condition: The Y-axis travels out of round by 0.03 mm; the machine is currently not functioning because the hard drive needs to be replaced. Availability: Immediate Tjdpfjz E Hwbex Amrsc Accessories: 3D measuring probe, machine manual

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 1044, Diosna SP 120 D spiral mixer/kneading machine Todpjdc Eh Ajfx Amroc 32 Ah connection with 2-hour timer, 2 speeds on castors In excellent condition, operates quietly If you have any further questions, please contact us. Thank you in advance.

Year of construction: 1999, condition: ready for operation (used), Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible. Tjdpfxjuui Eco Amrjc

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Tjdpfx Aozx D I Tsmrec Output: max. 30 pcs./min. Size – Cartons (55 x 30 mm and 95 x 120 mm). Label specifications: Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Label specifications: K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm L: Label length max. 800 mm Label winding outside.

Condition: used, Year of construction: 2001, pressing force: 60 t, 60-ton eccentric press with lower die clamp Additional safety fuse Tsdpfx Amez Hlf Tsrec Non-material barrier to be checked.

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Tedpfxot Ty A Ao Amrec Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Tjdpfx Aez Etacemrec Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Condition: good (used), Year of construction: 2020, Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, rotary indicator, resolver, incremental encoder -Manufacturer: Sick, Incremental rotary encoder, programmable -Type: DFS60B-S4PC10000 -Item No.: 1036721 -Voltage: 4.5-32 V -Shaft: Ø 10 x 19 mm -Quantity: 1 encoder available Tedpfx Ajxv T Rxjmrec -Dimensions: 75/60/H60 mm -Weight: 0.2 kg

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Tjdpfxjz Dttge Amrec Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Tedpfxowbp Nws Amrsc N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: new, Year of construction: 2019, functionality: fully functional, Sold as a lot. Schneider Electric ComPacT devices, unused, in original packing. Price on request. ComPacT NSX160F — 3 pcs. 4-pole moulded-case circuit breaker, terminals N, L1, L2, L3. Thermal-magnetic trip unit TM 160 D, 160 A at 40 °C, 50/60 Hz. Ui 800 V, Uimp 8 kV, Ue 690 V. Performance level F, Icu 36 kA at 380/415 V AC 50/60 Hz to IEC 60947-2; 85 kA at 220/240 V, 35 kA at 440 V, 30 kA at 500 V, 22 kA at 525 V, 8 kA at 660/690 V. Utilisation category A, suitable for isolation. Terminal shields and cable lugs included. Todpfew I Twqox Amroc ComPacT NS800NA — 16 pcs. Switch-disconnector, type NA, 3-pole, fixed, manual operation, front connection. Type NS800NA3PMF. Ui 800 V, Uimp 8 kV, Ue 690 V, Icw 25 kA for 0.5 s, Icm 52 kA peak, Ith 800 A at 60 °C, AC-23A 690 V / 800 A, 50/60 Hz, IEC 60947-3. Front connection kit supplied: copper links, phase barriers, bolts and terminal covers.

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm Tsdszf Nn Ejpfx Amroc number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: used, Inductive sensor, electronic sensor, sensor cable, connection cable, connection cable Tedpsir Nttofx Amrec -Manufacturer: Leuze electronic, connection cable sensor cable Ovp -Type: KD M12A-4P-5m-PVC -Part No.: 50104544 -Number: 2x cables available -Price per piece -Dimensions packaging: Ø 200 x 30 mm -Weight: 0.2 kg/pc.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Todpfxefi Tg Hs Amrec No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: used, mileage: 492,210 km, power: 115 kW (156.36 HP), first registration: 09/2010, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 4,120 mm, loading space width: 2,265 mm, loading space height: 2,230 mm, Equipment: tail-lift, Mercedes-Benz Vario 816 D, flatbed truck with tarpaulin and tail lift * Euro 5 * Leaf spring suspension * Manual transmission * Engine brake * Radio * Digital tachograph * Electric windows * 3 seats * Flatbed truck with tarpaulin and tail lift * Flatbed dimensions (L/W/H): 4,120 mm, 2,265 mm, 2,230 mm * Dautel tail lift, 1,500 kg * Automatic roller * Sideboards on the right and left * 11 pairs of lashing eyes on the loading area * Roof hatch * Luxury driver's seat Todpfx Amoza Rcujrec Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of § 145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: good (used), Equipment: type plate available, Ystral Type X 11,000 S/LDT-4-154P Disperser based on the rotor-stator principle on a stand, without control unit Tedpfjzp Nvwsx Amrec The YSTRAL disperser is designed for the production of emulsions and suspensions in the medium-viscosity range. It meets high requirements for fine dispersion, even in the medium-viscosity range, and is used for batches up to 2,000 liters. Drive: 2,910 RPM / 11.0 kW

Condition: used, Year of construction: 2011, Three knife trimmer Kolbus HD 143.P Year: 2011 Tsdpsz Eaq Ijfx Amrec For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Counter: 12.560.000 books Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: 7.500 single products/hour or 4,200 single products/hour from 40 mm product thickness on Maximum size (cutted): 305 x 420 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 320 x 450 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), functionality: fully functional, nominal power at 50% duty cycle: 14 kVA, input voltage: 380 V, type of cooling: water, overall weight: 300 kg, welding power (max.): 40 kVA, arm spacing: 450 mm, total width: 450 mm, total height: 1,450 mm, total length: 1,100 mm, stroke length: 110 mm, input frequency: 50 Hz, Spot welding machine Soudometal SP14P maximum welding current at 50 ED: 14 ​​kVA max. welding power 42 kVA Electrode force: 30-200 DAN Electrode stroke = 30-110 mm Projection: 450 mm Mains connection 380V / 42A secondary current continuous current 1.85 kA; kA short-circuit current 12.5 kV; Electrode force: 30-200 DAN foot control Cooling water volume: 3 l/min Electrode arm Ø: 45 mm Electrode holder Ø: 25 mm Machine weight: 300 kb kg Dimensions: 1250x1100x450 mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Todpfx Ajwkr Inomrsc Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), ELIN EBG 3-phase motor, water-cooled electric motor, 75 kW Tedpfx Aox Uqu Ismrec