Used Oliver Fritz Gmbh & Co. Kg Sandblasting Unit Rental Container for sale (113,864)

Condition: ready for operation (used), 20-foot sandblasting rental container with pressure blasting equipment, filter system, and safety equipment Djdsxl Dq Ujpfx Albscl

Condition: new, Year of construction: 2025, Shot blasting booth DSK 20.10.09 with trolley and rotary table. Width: 2050mm, Depth: 935mm, Height: 955mm Lift-up door with pneumatic system, offering the advantage that the blasting media falls into the booth when the door is opened, rather than onto the floor. Dedpfx Alsfnh Rvjbscl If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. The machines are based on manufacturing at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts.

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening Dcsdpfxjw Ivk Te Albsl - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: new, Year of construction: 2026, functionality: fully functional, Blasting container, 40 ft, with 9 m blasting chamber, screw conveyor floor (very low maintenance), blasting media preparation, and filtration system. Chamber dimensions (internal): approx. length = 8850 mm, height = 2485 mm, width = 2250 mm. Option: width including widening = 3240 mm. Transport height: approx. 3000 mm. Floor height: approx. 440 mm. Options: Dsdpfxszbztas Albocl - Side container opening for 9 m and 3 m machine room - Side extension for widening the blasting chamber - Crane roof opening (not possible with side opening) - Crane track, 500 kg and much more upon request.

Condition: new, Year of construction: 2025, sandblasting containers allow flexible blasting in closed rooms at any location where it is required. 5,89 x 2,35 x 2,69 m A closed sandblasting grit circulation using an integrated flat conveyor or screw conveyor floor, or via side-mounted recirculation channels, with optimal preparation of each blasting grit, ensures effective exploitation of the grit.Depending on the container size and required area output, one or more free jet pressure blowers can be used. The blasting nozzles of our tried and tested free jet pressure blowers are manually guided. Our free jet pressure blowers can be fitted with an automatic Dsdpfx Alofin Iyobocl refilling system to ensure continuous operation without interruption for the blaster.

Condition: new, Year of construction: 2025, Container shot blasting system. 5.89 x 2.35 x 2.69 m Container shot blasting systems with integrated machine room. Flat conveyor bed, screw conveyor bed, bucket elevator, processing unit, pressure blasting pot (100 l), filter system, extraction bed, opening designed as a manual blasting booth. For questions regarding technical specifications, etc., please contact us in writing or by phone. The basis for these machines is manufacturing at the Grossenlüder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts. Images may include optional accessories. Dcedsdkbvcspfx Albjl

Condition: new, Year of construction: 2025, sandblasting containers allow flexible blasting in closed rooms at any location where it is required. 8,89 x 2,35 x 2,69 m A closed sandblasting grit circulation using an integrated flat conveyor or screw conveyor floor, or via side-mounted recirculation channels, with optimal preparation of each blasting grit, ensures effective exploitation of the grit.Depending on the container size and required area output, one Dcodpfefnh Rwjx Albjl or more free jet pressure blowers can be used. The blasting nozzles of our tried and tested free jet pressure blowers are manually guided. Our free jet pressure blowers can be fitted with an automatic refilling system to ensure continuous operation without interruption for the blaster.

Condition: new, Year of construction: 2025, Centrifugal wheel rotating table system D = 1500 mm, 2 x 7.5 kW centrifugal wheels If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. Dodpedtq Anjfx Albscl The machines are based on manufacturing at the Grossenlueder site, which has been in operation since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contact persons.

Condition: new, Year of construction: 2025, Centrifugal wheel system, suspended monorail type 1.15 2T Dcodpfx Aljdrr U Sjbol Dimensions: D=1000mm, H=1500mm, payload: 500kg, with 2 centrifugal wheels, 7.5kW each, including filter system and dust collection filter. For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contacts.

Condition: new, Year of construction: 2026, Four-axis controlled shot blasting booth for cleaning die-casting molds, steel rings, permanent molds in aluminum casting, tire molds, press dies, and more. The travel path of the blasting nozzles is freely programmable. 2 automatic nozzles and 1 manual blasting nozzle for subsequent cleaning of the parts. Hardox rotary table and conveying screw for long-lasting operation of the blasting system. For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts. Djdpfedrtanjx Albocl

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. The machine has been in use for 10 years. Technical data: Djdpfx Alszxcn Eobscl - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, operational. Reason for sale: replacement with a newer model. The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net.

Condition: new, Year of construction: 2026, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy. Dodpfx Aow Ivqmelbecl

Condition: used, Year of construction: 2011, machine/vehicle number: E1053A0497, overall weight: 850 kg, For sale is a TRUMPF TruDisk 4002 (4C) disc laser / laser source, including a separate KLH cooling unit RW 20/0 SK. Laser technical data: * Manufacturer: TRUMPF Laser GmbH + Co. KG * Type: TruDisk 4002 (4C) * Year of manufacture: 01/2011 * Laser power: 4,000 W * Equipment No.: E1053A0497 * Supply voltage: 380 V (-10%) to 460 V (+10%), 3 AC + PE * Frequency: 50–60 Hz * Connection power: 23 kW / 25 kVA * Rated current: 34 A at 400 V * Protection class: IP54 * Weight: approx. 850 kg Cooling unit: * Manufacturer: KLH Kältetechnik GmbH * Type: RW 20/0 SK * Year of manufacture: 2017 * Part No.: E123223000AA * Serial number: 17KLH00670 * Voltage: 400/460 V * Frequency: 50/60 Hz * Refrigerant: R134a * Refrigerant quantity: 3.7 kg The TruDisk 4002 is offered together with the KLH cooling unit shown in the picture. Inspection is possible by arrangement. Further technical information and images can be provided upon request. Dodpjzvqfyjfx Albjcl

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Dcsdpfx Alezw Ucxebel Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Dcjdpfx Aozw Ug Rjlbsl Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: new, Year of construction: 2025, sandblasting containers allow flexible blasting in closed with extension modules each 1m rooms at any location where it is required. 6,60 x 2,99 x 3,5 m A closed sandblasting grit circulation using an integrated flat conveyor or screw conveyor floor, or via side-mounted recirculation channels, with optimal preparation of each blasting grit, ensures effective exploitation of the grit.Depending on the container size and required area output, one or more free jet pressure blowers can be used. The blasting nozzles of our tried and tested free jet pressure blowers are manually guided. Dcsdpfx Alofnh Rzjbel Our free jet pressure blowers can be fitted with an automatic refilling system to ensure continuous operation without interruption for the blaster.

Condition: new, Year of construction: 2025, Shot blasting chamber, 12x5 m, with shot blasting carriage and flat conveying system. Dodpfjdhliksx Albscl Flat conveying system, screw conveyor, bucket elevator, magnetic separator, processing equipment, material hopper, shot media refilling system, free-jet pressure blasting unit, filter system with cleaning function. Walls lined with 4 mm woven rubber. For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contacts.

Condition: new, Year of construction: 2025, Blasting container with overhead crane, HC 20 ft. Includes screw conveyor base, bucket elevator, air separator, vibrating screen, blasting media hopper, blasting unit with accessories, extraction hood for blasting media recovery, filter system with pre-separation chamber, 4mm woven rubber lining, lighting, emergency lighting, door switch, viewing window, Siemens Logo electrical control system, 500kg overhead crane with structural calculations and initial inspection, CE marking with operating manual. Dcodpjiqnrvjfx Albol

Condition: new, Year of construction: 2025, Abrasive blasting cabinet DSK 1102 S with trolley and rotary table. Dedpfx Alsdhl Ngjbecl Width: 1500mm, Depth: 1235mm, Height: 995mm Lift-up door, pneumatic. If you have any questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contact persons.

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Dodpfxew Uab Aj Albjcl Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling • Machining of metal components • Single-part and batch production

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Djdpsw Ivqgofx Albjcl essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Extraction floor, waffle floor for mineral blasting media, approx. 7000x4200mm, without grating cover, with suction nozzle and collection boxes. For questions regarding technical specifications, etc., please contact us in writing or by telephone. Dcjdpfjdz Ayvox Albjl The machines are based on production at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contact persons.

Condition: used, Linear unit, linear axis, gantry axis with magnetic drive, linear guide for magnetic linear motor, electric slide Manufacturer: GEIGER Handling GmbH & Co. KG Type: Motion Liner 20.0 Serial No.: 228773 2207 02659 Year of manufacture: 2022 with 2x linear guide REXROTH N R160 520 431 PTS / FD274 / RO10 Dcjdpfx Alszinxqebel Length of the guide rail: 3790 mm Length of the base body - overall length: 3980 mm - Standard linear guide BOSCH REXROTH series R1605 - guide rail 15 mm - Base body profile made of steel 200 x 95 mm - Measuring system with metal tape RSF MS 40.x6 MK (measuring length 3440 mm) - Base body with permanent magnet bed for linear motor Overall dimensions L x W x H: 3790 x 200 x approx. 140 mm Weight: 162 kg (weighed) very good condition - like new, unused from stock

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG High-Resolution Continuum Source Atomic Absorption Spectrometer with PC, AAS ContrAA 700 Model: AASContrAA700 Condition: Used Technical Data: 230V AC 50/60Hz 2100VA General: Optical System Reflection optics with protective coating and optical system with light-tight encapsulation Monochromator Echelle grating double monochromator with F=380 mm focal length and variable intermediate slit; pre-monochromator with quartz prism. Wavelength selection via mirrored neon auxiliary lamp Wavelength range 185-900 nm Spectral bandwidth 2 pm at 200 nm Accessories: Documentation/Manual PC (Windows 7), Monitor, Mouse, Keyboard, Connection cables 5x IC standard tube 407-A81.011 3x Graphite pipetting inserts 407-A81.020 Dcsdezh Iqwepfx Albel contrAA fuse set Grease for O-rings 2x Grommet 702-A81.233 1x Grommet 702-A81.234 1x Collection tray 407-110.499 4x Carrying handles

Year of construction: 2021, condition: new, The container scale from WeDi GmbH is used to determine the fill level of roll-off containers. It consists of 2 drive-on ramps, each measuring 1000 mm x 400 mm x 160 mm, made of 10 mm thick steel plates, including end stops with reinforcing plates and struts, as well as a lateral centering rail and mounting holes. 1 weighing beam, 100 mm x 100 mm, length 2,300 mm, designed as a U-profile, 10 mm thick, with holes for mounting the load cells. 1 weighing beam, 100 mm x 100 mm x 1,400 mm long, designed as a U-profile, 10 mm thick, with holes for mounting the load cells, including a support plate made of 10 mm steel, reinforcing plates made of 10 mm steel plates, and 20 mm x 20 mm square steel for lateral guidance of the weighing beam. Dcsdpjgyph Aefx Albol For weight measurement, 1 load cell kit BKSB 15000 with a weighing range of 15,000 kg and a readability of 2 kg is used, consisting of 4 x K30S 5000 load cells with spacer plates, 4 load feet, 1 JBB-04 junction and trimming box, and 10 m weighing cable for the display electronics. A BWI weighing electronics unit serves as the weighing electronics, featuring an illuminated 50 mm large display, dimensions 250 x 160 x 60 mm. It is housed in a high-quality, flat plastic case and offers user-friendly operation. Basic functions: tare, zero, gross/net. After assembly, the container scale is programmed to zero = empty Kat 3 container tare weight. The power supply is 220 volts. Price: 5,620 € plus VAT.