Used Ofem Juliette 808-80 for sale (17,990)

Condition: good (used), Year of construction: 1997, functionality: fully functional, 8 colors 1 unwinder Dodpfszzpi Ujx Albowb 2 cranes for rollers and film/paper can print on paper and film cameras control operating panel

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Dsdpfjvakdzox Albowb Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: excellent (used), Year of construction: 2014, Offer for flexo press UTECO ONYX 808 gearless, 8 colors, year 2014 and 1280 mm width. Fully equipped. Dwsdpoxf T Hlefx Albob

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Dedpfx Aloy Evirebowb Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Djdpfxezbg Eze Albewb Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: excellent (used), Year of construction: 2012, Operating range V808 Min. / max. height 10 – 500 mm1 Min. / max. width 60 – 1.250 mm Max. positioning weight 13.200 kg Min. material length 1.200 mm Max. cutting width at the bottom 800 mm (only plasma marking and cutting) Plasma cutting unit* Hypertherm HPR260XD Virtually dross-free cutting max. 32 mm Marking lines Yes, marking and cutting with the same consumables Plasma gas mild steel O2 (99,9% pure clean, dry, oil-free) Shield gas mild steel O2/air (99,9% pure clean, dry, oil-free) Cutting speed 12 mm Approx. 3850 mm/min., 260A Cutting speed 20 mm Approx. 2170 mm/min., 260A Cutting speed 32 mm Approx. 1135 mm/min.; 260 A Fuse Additional 75 A slow is required Plasma Gas O2 (99,9% pure clean, dry, oil-free) Consumption 80l/min System pressure 10 bar * grounding, max. 6m of machine: AC power, PE, and service grounds must be connected to all equipment according to local and national codes. Oxy-Fuel cutting unit Gas supply Magnetic valve with back-fire protection Ignition Automatically Gas Acetylene Dwjdpfx Alszcfpzebsb Consumption 20l/ min System pressure 2 bar Cutting Gas O2 Consumption 450l/ min System pressure 10 bar Operational direction From right to left Profiles 1 Flat steel Angles European standard channels (UNP) European I-beams (IPE) European standard beams (IPN) European wide flange beams (HE) British universal beams (UB) British universal columns (UC) Square tubes 1 Small profiles have to be sufficient straight. General Voltage Stabilizer Not included Ambient temperature 0 - 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: good (used), Year of construction: 2004, Item: DP-18231-Pump-APV-W80-80-240 Brand: APV-SPX Djdpfxjtk Hyke Albowb Type: W+80/80 240 Brand: APV-SPX Serial number: 3013986 Year: 2004

Condition: used, Year of construction: 1978, Liter per hour: 7000 Dodpozx A Edjfx Albewb

Condition: used, Year of construction: 1993, operating hours: 48,000 h, Self-stacking spiral freezer belt, Frigoscandia FRIGoBELT - replaced in 2010 Link height: 80mm / max. product height: 65mm / Net belt width: 580mm / Belt width between infeed covers; 535mm / belt stack with 24 tiers / Belt mesh: M13-1.5 / 24 tiers (possible to put more tiers) Layout N-S CCR Dwedpfxsvf Iuzs Albob Evaporators SS/AL / number of coils: 1 / number of fans: 2 Standard -replaced in 2011 CIP belt cleaning system Enclosure: W/W (white inside and white outside) - replaced in 2010 Chain, balls and plastic guides replaced in 2017 Refrigerant: ammonia / refrigeration: R717 Max total heat removal 252 kW/h ProCare service till 2018 Documentation available Stop running in 2018 Possibility of dismantling and preparation for transport for an additional fee

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, working width: 300 mm, working length: 3,000 mm, Block press / Stationary press for multi-layer parquet Manufacturer: Soest Djdpfx Alszzmv Eebjwb Type: T 80 Hydraulic cold press, previously used for pressing multi-layer parquet (top layer, core layer, and counter layer) Year of manufacture: 2017 (CE marking) Press width: approx. 300 mm Press length: approx. 3000 mm 4 press cylinders, diameter approx. 80 mm Pressing force: 80 t, equivalent to approx. 9.2 kg/m2 Total connected load: approx. 3.5 kW Dimensions: approx. 4200 x 980 x 2150 mm (L x W x H) Weight: approx. 3300 kg

Condition: used, Year of construction: 2005, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 8031-010, overall weight: 1,500 kg, rotor diameter: 250 mm, number of blades: 20, total length: 2,150 mm, total height: 1,315 mm, total width: 1,515 mm, rotor width: 800 mm, power: 11 kW (14.96 HP), type of input current: three-phase, feed length X-axis: 800 mm, warranty duration: 1 months, input voltage: 400 V, This VECOPLAN VAZ 100/80 U was built in 2005 and is in very good technical condition. Currently disconnected but fully functional. Dwjdpfszzcfcsx Albjb Plug & Play with a 32-ampere plug. Ideal for shredding wood. Various wear parts are available. Please contact us for more information.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, I sell the horizontal foil wrapping packing machine Producer: SCM GROUP, Italy Model: PACK 8080 Year: 2012 / like NEW, almost not used before Dsdpfxjr Alx Uo Albswb Working circle diameter 1300mm. Working tables width 900mm. Feeding manual with tables total length 2,60m Assembled, ready for work. Avialable immediately. On stock.

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm Dwedpfxewy Raze Albeb -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: 88 Z -Number: 15x saw blades available -Price: per piece -Weight: 10.5 kg/piece

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, BLM Group ADIGE-SYS EM 80 – Fully automatic circular saw for tubes and profiles, year 2015. We offer for sale a fully automatic circular saw, the BLM Group ADIGE-SYS EM 80, designed for precise and highly productive cutting of tubes and profiles in serial production. The machine is equipped with a Siemens SINUMERIK CNC control system and an automatic material feeding system, which enables efficient and repeatable production of larger series. Technical data: Manufacturer: BLM Group / ADIGE-SYS Model: EM 80 Year of manufacture: 05/2015 Control system: Siemens SINUMERIK Operating hours: approx. 26,400 h Tube cutting range: Ø 10–80 mm Max. length of finished part: 600 mm Total installed power: 38 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: approx. 8,500 kg Equipment: automatic material feeding system fully automatic working cycle multiple tool/working positions complete enclosure of the working area extensive set of interchangeable clamping jaws for various diameters – see photos Dodpfx Aozyny Njlbjwb supply and feeding section of the line Siemens SINUMERIK CNC control The machine is particularly suitable for serial production of shorter parts made of tubes and profiles, where high productivity, repeatability, and cutting accuracy are required. Condition and history: The machine was purchased by the current owner approximately 2 years ago for a planned production project, which was ultimately not carried out. Therefore, it has not been used in production since then. The machine has undergone a refurbishment of the hydraulic brake seals on the bed. Technical documentation in German is available, including complete electrical documentation. The offer also includes accessories and a set of clamping jaws shown in the photos.

Condition: good (used), Year of construction: 1996, GALLUS Arsoma EM 280-8 Colour Flexo Printing Press Model: EM280 Year of manufacture: 1996 Configuration: • 8 flexo printing units • 8 hot air dryers • GEW UV curing system (1x) • Turn bar (web turning device) • Sheet delivery (stream delivery) • BST Powerscope 4000 web inspection system Technical Data (approx.): • Max. web width: 280 mm • Print width: approx. 260–270 mm • Repeat length: approx. 250 – 520 mm Dsdpoy A Nhisfx Albowb • Unwinder: max. roll diameter approx. 800–1000 mm • Rewinder: max. roll diameter approx. 800–1000 mm • Mechanical speed: up to approx. 120 m/min • Substrate range: self-adhesive labels, paper, film and flexible packaging materials The machine offers a robust and proven solution for label production, providing high flexibility due to the combination of conventional drying and UV curing systems. This enables the processing of a wide range of materials and applications. A key advantage of this press is the included tooling package, which significantly reduces the need for additional investment and allows for immediate production start-up. Scope of delivery includes: • Printing cylinders • Anilox rollers • Magnetic cylinders This added value ensures high versatility and cost-efficiency for future production needs.

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 315 mm, feed length Z-axis: 175 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 50 rpm, quill travel distance: 175 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 9 m/min, rapid traverse Z-axis: 4 m/min, total width: 2,480 mm, total length: 1,620 mm, table width: 1,230 mm, table length: 410 mm, position of the milling head: vertikal, type of input current: AC, rotational speed (max.): 9,000 rpm, rotational speed (min.): 50 rpm, overall weight: 3,200 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, space requirement width: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 2,450 mm, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Due to restructuring measures, we are selling our CNC milling machine – Fehlmann Picomax 80 CNC 2/3 - robust Swiss precision machine - year of manufacture 1995 - low operating hours - very good condition considering its age - Heidenhain 315B control system - 4 axes (X, Y, Z + A [rotary axis]) - axes can be moved in parallel Dodpfxozzd Hho Albowb - travel distances X700 x Y315 x Z170 (+W495) mm - table 1,320 x 410 mm - 4th axis (rotary axis) AT100 original Fehlmann with 140mm three-jaw chuck and collet chuck - manual control panel - spindle 50 – 9,000 rpm - complete steel sheet enclosure with safety glass - fully functional - complete operating and programming manual - spare parts and service available from Fehlmann - machine can be inspected while powered on Depending on the price, a wired measuring probe (Renishaw), an electric fine milling and grinding spindle from RAY (Switzerland) 10,000 - 40,000 rpm, and various tool holders can be included. This offer is subject to change. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made with the exclusion of any warranty. Pick-up only (EXW) - no shipping.

Condition: used, This listing is for the Biotek ELx808 Plate reader The unit is in full working condition and is ready for immediate use Djdpexhftvefx Albewb The BioTek ELx808 is a multi-channel absorbance microplate reader designed for high-precision optical density measurements in 96-well format microplates. Functioning essentially as a microplate-format spectrophotometer, the ELx808 measures light intensity as a function of wavelength—allowing for precise quantification in applications such as ELISA, endotoxin testing, enzyme kinetics, and microbial growth. This model is suitable for both research and development as well as diagnostic use, and is frequently employed across multiple disciplines including biology, chemistry, and nanotechnology. However, unlike some other microplate readers on the market, the ELx808 is specifically engineered for 96-well plates only and does not accommodate a broad range of labware.

Year of construction: 2016, condition: excellent (used), Voortman V808 CNC Beam Coping Line – Year 2016 (REF: STK‐1549) Coping Robot | Automatic in‐feed & out‐feed | 1.25m Sections | Roller Feed Djdpfolff H Eex Albswb Kjellberg SmartFocus 300A Plasma Unit | Donaldson Extraction System

Condition: used, Year of construction: 1983, functionality: fully functional, Atlas Copco Industrial Screw Compressor – 75 kW – 7.5 m³/min – 8 bar Available: Atlas Copco GA Series industrial screw compressor, a professional machine designed for continuous operation in demanding industrial environments. The compressor is mounted in a soundproofed enclosure with hinged access panels for easy maintenance and inspection. A robust and reliable unit, true to Atlas Copco’s industrial standards, ideal for manufacturing plants, workshops, and compressed air stations. Technical specifications: - Manufacturer: Atlas Copco - Model: Oil-lubricated rotary screw compressor - Motor power: 75 kW - Voltage: 400 V - Current: 157 A - Motor speed: 1460 rpm - Operating pressure: 8 bar - Air delivery: 7,500 l/min (7.5 m³/min) - Year of manufacture: 1983 Features and equipment: - Integrated air/oil separator - Air receiver and auxiliary components included Dsdpsytgrfefx Albowb - Soundproofed cabinet - Complete turn-key compressed air unit

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 5.5 kW (7.48 HP), pressing force: 80 t, stroke length: 150 mm, total length: 3,180 mm, total width: 1,250 mm, total height: 2,450 mm, overall weight: 6,000 kg, Equipment: documentation/manual, Accessories: 3 x bending prism, 3 x top beam, several bending segments, backstop, stroke counter, manual night operation. Technical parameters: Rated force 800 kN, Working table length 2500 mm, Table width 160 mm, Ram speed: downward 50 mm/s, pressing 10 mm/s, upward 100 mm/s, Maximum ram stroke Z 150 mm, Distance between side frames B 2050 mm, Overhang A 250 mm, Maximum opening height H 380 mm, Parallel ram stroke accuracy 0.1/1000 mm, Working fluid pressure 24 MPa, Electric motor power: main 5.5 kW, Machine dimensions: length (with cabinet) 3180 mm, width 1250 mm, height 2450 mm, Machine weight 6000 kg. The machine can be tested in our warehouse in Přerov by arrangement. Djdpfx Aszzffrelbowb

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm Dwodsx D Nluopfx Albsb • Max: 790 mm

Condition: used, Year of construction: 1992, machine/vehicle number: 800 068, Machine completely in stainless steel Stainless steel frame with plexiglass doors with safety sensors whereby the machine stops automatically when the doors are open. Safety switches on the stars, worms and all moving parts whereby the machine stops Automatic magazine for the capsules Very well maintained Dwodpfszzpizex Albjb All documentation available Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 6000 working direction: left-right Working type: fullautomatic amount of capping heads: 8

Condition: used, Year of construction: 1992, machine/vehicle number: 120 4687, Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Dwsdpfeuqc I Ajx Albjb Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5 Standard configuration Roll feeder Type WAV - RDS 2E 1125Material width max. 310 mmMaterial thickness 0,3 - 3 mmMaterial cross section 630 mm2Feeding speed 80 m/minFeeding roll diameter 125 mm 

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 533143283, travel distance X-axis: 2,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller manufacturer: MAZATROL, workpiece height (max.): 750 mm, workpiece weight (max.): 3,000 kg, table width: 800 mm, table length: 2,240 mm, overall weight: 14,000 kg, Mazak MTV-815/80 • Table size: 2,240 mm × 810 mm • Maximum table/workpiece load: 3,000 kg evenly distributed • Maximum spindle speed: 40 - 6,000 rpm • Spindle taper: SK 50 • Spindle power/torque (standard): e.g. 18.5 kW and 759 N·m at 40% duty cycle / 30 min rating; for high-power version: 26 kW and 1,067 N·m. Dodpfx Aljx E Twasbewb Inkluded loading on truck All information provided without guarantee

Condition: used, mileage: 633,842 km, power: 353 kW (479.95 HP), first registration: 06/2008, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 4,100 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro4, suspension: other, total length: 8,000 mm, total width: 2,550 mm, Year of construction: 2008, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking heater, traction control, = Additional Options and Accessories = - Remote-controlled central locking - Lifting axle - Power take-off (PTO) - Radio - Disc brakes - Sun visor - Auxiliary heater - Toolbox = Notes = Hiab 1055 E-8 HIPRO 6 x outriggers. 8 x hydraulic extension. 1 x manual extension. Djdpfx Aeyy Ra Ujlbjwb = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/60R22.5; Double tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/60R22.5; Double tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Suspension: Leaf spring suspension Weights Unladen weight: 23,680 kg Payload: 13,320 kg GVW (Gross Vehicle Weight): 37,000 kg Functional Crane: Hiab Financial Information Price: Upon request Identification Model number: R480 8x2 / HIAB 105 tm CRANE / K = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT). We speak Russian. We make every effort to provide accurate information, but no rights can be derived from the information provided.