Used Novus Filter Ventilation, Novus Smoke Extraction Unit for sale (36,140)

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Hsdpsxxalnsfx Ag Usn Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Hsdpsxg Ickjfx Ag Uen Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Filtration area: 16.5 m2 Inlet diameter: 180 mm Stock number: 1140 Hsdpfxoy Sz Dns Ag Uen

Condition: good (used), Year of construction: 2018, AMBITOWER 10 series filter ventilation (filter tower) is used for welding fume extraction in production halls. Efficient compact hall ventilation systems are used wherever selective smoke detection alone is not sufficient or direct detection during welding work on large or complex metal parts seems unfeasible. Filter towers not only provide effective separation of contaminants, but also contribute to significant savings in hall heating costs in winter. Depending on the application, energy costs can be reduced by up to 70%. This is ensured, among other things, by highly efficient M-class fixed filter cartridges, which guarantee 99% separation efficiency, so that warm, purified air can return to the hall and there is no need to bring in outside air. Hsdpfei Atb Tsx Ag Usn Areas of application for Keller Ambitower 10 stationary welding fume filtration systems : Welding fume extraction in production halls (hall ventilation system) Ideal for all work areas where local extraction is not practical or not possible, metal industry Mechanical engineering Automotive industry Vehicle construction aircraft construction, etc. Parameters : Engine power - 7.5 Kw. Built-in inverter Capacity - 10000 m3/h Filtration area - 90 m2 Antistatic filter cartridges Noise level - ≤ 75 Year of manufacture: 2018 Technical documentation included dimensions: width - 2.35m x 1.35m height - 3.50 m Weight - 1800 kg

Condition: good (used), Camfil Filter Unit CS 610 for Industrial Extraction Systems Manufacturer: Camfil KG Hsdpoyrnfwsfx Ag Usn Model: CS 610 painted Type: Filter unit for industrial extraction systems Article number: 518110 Serial number: 000442739182 Quantity: 2

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer Hjdpoyq Nl Nsfx Ag Ujn - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Year of construction: 2012, condition: good (used), Offered from a bankruptcy is a ready extraction and filter unit by ULT Model ACD VF 1000 Year 2012 230 Volt Suction connection 150 mm Extraction unit 200 mm Dimensions in mm approx. 1250 x 680 x 800 Weight 125kg Hsdpfx Agoducl No Usn Nominal power 1000 m³/h The Absauganalge is suitable for vacuuming and filtering of vapours and odours. Chemical gases and vapors dry, non-explosive She can be used with folding arms directly as machine extraction and extraction.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Hsdjw Ivqgopfx Ag Uon Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Hsdpew Ivr Djfx Ag Ujn Maintenance doors as swing doors Maintenance easy.

Condition: used, Filter housing, dust extractor, extraction installation, filter unit, dust filter Dimensions: 680mm x 680mm x 2800mm Outlet diameter: 200mm Capacity: 1500 m3/h New top filter 3 round filter cartridges need replacement Complete with control cabinet and pneumatically cleaned filter cartridges Hsdpjwyf T Ajfx Ag Usn

Condition: good (used), Filtration system extraction unit filter unit dust filter filter cabinet Infastaub Filter surface area 22.5 m² 900–1080 m³/h Includes new holders and filter bags All stainless steel Diameter 800 mm Height 860 mm Equipped with compressed air-cleaned filter Hsdpewyf Tpsfx Ag Usn Equipped with control cabinet See our other advertisements

Condition: used, Year of construction: 2009, Extraction unit filter cabinet Brand/Type: FAPP AE 12/3J Hedpsxc Erhefx Ag Usn Equipped with 1 used filter cartridge See our other advertisements VMA Wekerom

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Storage location: Nattheim Hjdpfx Agjvxk Ano Uon

Condition: used, ALKO clean air extraction unit, Power Unit 200P - used Air filtration using filter hoses, Cleaning performed pneumatically, Dust-tested, Hedpfx Agsy T Ebge Uen Mobile collection container ----- Technical data ----- Extraction nozzle diameter: 200 mm, Nominal air flow rate: 2,261 m³/h, Maximum negative pressure: 2,174 Pa, Number of bags: 2, Motor: 3 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,300 x 850 x 2,050 mm, Weight: 470 kg

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 Hjdpfsu R Szyox Ag Uon - new exhibition machine -

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 11 kW (14.96 HP), volume flow: 8,000 m³/h, nominal flow rate: 6,950 m³/h, negative pressure: 2,630 Pa, H 3 "GS dust-tested" Hsdpfx Agowty Uze Usn Extraction connection 350 mm Ø Pneumatic JET filter cleaning Extinguishing system with powder extinguisher With rotary air lock

Condition: used, Year of construction: 2022, Volume flow rate: 18,000 m³/h, active filter area 237.6 m², condensate drain, designed for 10 machining centers, mounted on a custom-built steel frame above the hall entrance gate, complete with piping, manufactured to the dimensions of the hall, and intended as a supply line to the individual CNC machining centers. Subject to prior sale. Hodpfxjy T Nxve Ag Uen

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.350+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Hsdpfx Aofiulfjg Uen

Condition: used, filter area: 252 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Parameters: Efficiency - 12000 m3/h Filtration area 252 m2 Cartridge filter inserts - 12 pcs. 15 kW engine inlet diameter - 500 mm Hodpjvzy Irsfx Ag Ujn Dimensions: height - 3.65 m width - 2.10 m depth - 2.10 m fan: 1.75 m x 1.50 m height 1.45 m stock no.: 0948

Condition: good (used), Available quantity: 3 Hsdpjy Uizysfx Ag Uon

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: SMC, Maintenance unit filter control valve -Soft start valve: AV4000-F04-5Y0-X260-Q -Pressure switch: I SE30A-01-P Hodpfsx Ryhcex Ag Ujn -Filter control: AW40-F04H-A -Switching valve: VHS40-F04A -Individual components: see photos -Price/Fee: complete -Dimensions: 340/120/H250 mm -Weight: 2.3 kg

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Hjdpfer R Ewlsx Ag Uen Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: good (used), Storage location: 3108 Manufacturer: TEKA Year of manufacture: 2012 Operating hours: 5,618 h Type: Strongmaster IFA Serial number: 6907210061062 Airflow rate: 3,000 m³/h Outrigger length (approx.): 3,000 mm Features: mobile Accessories: new filter insert Connection: 1.1 kW, 400 V Weight: 160 kg Hsdpfsy T Uxnex Ag Uen Dimensions: 800 x 800 x 1,500 mm (without hose) Hose length: approx. 4,000 mm

Condition: used, Compact self-cleaning industrial filtration unit designed for the extraction and filtration of dry dusts and fume particles in continuous operation. Suitable for industrial applications such as grinding, sandblasting, welding, laser engraving, and machine processing. Condition: used. Manufacturer: HFILTRATION S.r.l. Model: PC MINI Machine Type: Industrial Cartridge Filter Unit Condition: used Filter Type: Self-cleaning Cartridge Filter Application Area: Dry Dust Filtration Filter Cleaning: Pulse-jet compressed air cleaning Filtration Efficiency: below 5 mg/Nm³ Cartridge System: BGIA-certified filter cartridge Cartridge Height: 600 mm Dust Collection Container: 15 liters Compressed Air Connection: 3/4" F GAS Required Compressed Air Pressure: 5 to 6 bar Maximum Compressed Air Pressure: 6 bar Compressed Air Consumption: approx. 40 Nm³/h Electrical Configuration: with fan and motor protection switch Motor Protection: magnetothermal circuit breaker Voltage: 400 V ±10% Electrical Protection Class: minimum IP54 Operating Temperature: -10 °C to +40 °C HEPA Filter: optional H13 or H14 Applications: grinding, blasting, cleaning, welding fumes, laser engraving, machine processing CE marking: present Hjdpfx Ajy Sbrxsg Uen Machinery Directive: 2006/42/EC EMC Directive: 2014/30/EU Low Voltage Directive: 2014/35/EU

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning Hedpfx Agjy R S E Ho Uon -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Quantity: 1 piece available -Price: per piece -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg