Used Nexa3D 3D Printer for sale (3,725)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, printer was rarely used at university which does not use it any more Cgjdpfxow Inrce Airju

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Cgjdpfsw Inpnex Airou

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 28.22.0079, Year of construction: 2022, operating hours: 6,700 h, overall weight: 1,870 kg, laser power: 700 W, operating pressure: 8 bar, inner dimension height: 365 mm, inner dimension length: 280 mm, No minimum price – guaranteed sale to the highest bidder! The system has been serviced annually by SLM Solutions. Service reports and machine assessment are available upon request. The system includes the “SLM280 2.0 complete material change kit incl. PSM100” and a second set of filter housings, minimizing the effort required to switch between two materials. TECHNICAL DETAILS Laser power: up to 700 W Materials: suitable for all common materials in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor unevenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, impermeable to liquids, smooth Processing area and process data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Variable layer thickness: 20–90 µm Minimum feature size: 150 µm Beam focus diameter: 80–115 µm Scanning speed: max. 10 m/s Laser type: IPG fiber laser Single laser 700 watts Media supply Operating pressure argon: 7–8 bar Operating pressure nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Volume flow rate primary circuit: 1.4 m³/h Cooling water inlet temperature min.: 18 °C Cooling water inlet temperature max.: 20 °C Cooling medium: Coolflux MACHINE DETAILS Control system: SLM MCS Electrical connection values Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current draw: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling power: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Shipping weight: 1,870 kg Operating hours: approx. 6,700 h Csdpfxoy Rn A Ie Airjgu EQUIPMENT Cooling is provided by “Cooling unit HRS050 L/W” Sieving station PSM100 V3 Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of substrate plates after printing) SLM280 2.0 complete material change kit incl. PSM100 Powder containers Substrate plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements The system is currently still in operation and can be inspected by appointment. After the auction, the system will be disassembled by the machine manufacturer, loaded onto the company premises, and handed over to the buyer.

Condition: used, SLM Solutions Type: SLM 500 Build space (L x W x H): 500 x 280 x 365 mm (minus substrate plate height) 3D optics configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm, Min. structure size 150 µm Focus diameter 80 µm - 115 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 16 l/min (argon) Average protective gas consumption in the flooding process: 250 l/min (argon) Cgodjv Iff Nspfx Airsu Powder supply with 90 kg Electrical connection / power consumption: 400 volts 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Was operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), EOS GmbH EOS P 396 Laser Sintering System Professional SLS system for additive manufacturing and industrial plastic 3D printing For sale is a professional industrial laser sintering system of the type EOS P 396 from the manufacturer EOS GmbH. The system comes from commercial industrial use and is offered including control panel, powder handling system, docking station, multi-boxes, documentation, service records and accessories. The system uses the process of Selective Laser Sintering (SLS) and is suitable for additive manufacturing, rapid prototyping, small series production and industrial applications. Suitable for research & development, automotive, mechanical engineering, aerospace, medical technology and industrial plastic processing. Technology: Selective Laser Sintering (SLS) Usable build volume: 340 x 340 x 600 mm Build rate: up to 48 mm/h (material-dependent) Layer thicknesses: 0.06 mm / 0.10 mm / 0.12 mm 0.15 mm / 0.18 mm Laser system: CO₂ laser 70 W laser power F-Theta precision optics Scanning speed up to 6 m/s Laser Class 1 Electrical data: Voltage: 400 V 3~ / N / PE Frequency: 50 / 60 Hz Rated power: 10 kW Current consumption: 16 A Mains fuse: 32 A Supply: Integrated nitrogen generator External nitrogen connection available Compressed air supply required: min. 10 m³/h at 5,000 hPa Software: EOS PSW EOS RP Tools EOSTATE Interfaces: STL Ethernet Certifications: CE NFPA EN 60825-1:2007 Maintenance condition: Current service and maintenance records available. According to the available service reports, the following have been renewed, among other things: heating elements, roller band replaced, X-axis and carriage cleaned, laser window and mirrors cleaned, seals renewed and safety circuits tested. Additionally included: Docking station for powder supply with pneumatic conveying system The docking station is used for the automated supply of the laser sintering system with powder material and supports an efficient material flow. Manufacturer: HYDAC Cooling GmbH Type: FWKS-G2-001500-W-W-R25-2-IW-UL Electrical data docking station: 230 V ±10 % 1 PH / 50-60 Hz Max. current consumption 8.0 A ICC / SCCR 10 kA CE / RoHS 2x EOS Multibox For closed storage, for transport and for collecting refreshed and used powder. Capacity per multi-box: approx. 230 liters Dimensions according to documentation: System incl. control cabinet: approx. 1840 x 1175 x 2100 mm Control panel: approx. 950 x 700 x 1550 mm Cedpfezarg Usx Airjgu Total weight laser sintering system: approx. 1400 kg Recommended installation space: at least 4.3 x 3.9 x 3.0 m Dimensions and weight data are based on the best of our knowledge according to nameplates and manufacturer's documentation. Scope of delivery: EOS P 396 Laser Sintering System Control panel Docking station 2x EOS Multibox Available documentation Service reports Accessories and components according to the pictures Condition: used Optical condition see pictures Scope of delivery as shown in the pictures Inspection and testing on site is possible after prior agreement and is expressly desired. Loading and transport organization can be supported after consultation. Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates, available documents and manufacturer information. (Changes and errors in technical data are reserved!) We will be happy to answer any further questions by telephone.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location. Cedpfoibikwex Airogu

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 2,128 mm, total width: 1,294 mm, input voltage: 400 V, warranty duration: 6 months, input current: 32 A, laser power: 100 W, tank capacity: 32 l, volume flow: 20 m³/h, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Cgjdpoqwkypjfx Airou

Condition: used, functionality: fully functional, Year of construction: 2019, type of input current: AC, input voltage: 240 V, input current: 13 A, input frequency: 60 Hz, We are offering this used 3D printer Stratasys Objet350 Connex3, year of manufacture 2019. Cgedpjyzq Nlsfx Airou Model: Objet350 Connex3 Serial Number: 370192 Year of Manufacture: 2019 Supply Voltage: 100–120 V Supply Voltage: 200–240 V Rated Current: 13.5 A Rated Current: 7 A Frequency: 50–60 Hz Number of Phases: 1 Short-term Peak Current: 1000 A If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: used, functionality: fully functional, total length: 140 mm, total height: 1,300 mm, overall weight: 1 kg, Artec Space Spider professional 3D scanner, tested and fully functional. High-resolution handheld scanner with blue structured-light technology, ideal for reverse engineering, quality control, medical applications, and precision digitization. Csdpsy U H Rxofx Airsgu KEY FEATURES: - 3D resolution: up to 0.1 mm - Accuracy: up to 0.05 mm - Technology: blue structured light (safe for scanning people) - Color scanning - Weight: 0.85 kg (portable, handheld) - Includes original carrying case and cabling APPLICATIONS: reverse engineering, dimensional quality control, dental and medical (custom prosthetics/orthotics), heritage and art, jewelry, industrial design. Unit from a professional service bureau. Available for demonstration prior to purchase. Location: Spain. Easy shipping throughout Europe. Please inquire about the Artec Studio software license type and included accessories.

Condition: used, functionality: fully functional, Year of construction: 2017, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, HP Multi Jet Fusion 4200 additive manufacturing system, tested and fully functional. An industrial solution for the series production of end-use parts in PA12 nylon. THE SYSTEM INCLUDES: - HP Jet Fusion 4200 printer - HP Processing Station (powder processing station) - Build Unit(s) MAIN FEATURES: - Technology: Multi Jet Fusion (MJF) - Build volume: 380 × 284 × 380 mm - Material: PA12 (nylon 12) - Production of short and medium series of functional end-use parts - Year of manufacture: 2017 Cgjdpfxjy U H Idj Airju - Three-phase power supply APPLICATIONS: industrial, automotive, medical (prosthetics and orthotics), consumer goods, on-demand spare parts. Equipment from a professional service bureau. Available for pre-purchase inspection. Location: Spain. Loading and transport can be arranged. Please inquire about the detailed inventory of Build Units, consumables, and the included powder stock.

Condition: used, functionality: fully functional, machine/vehicle number: 155-10000, Year of construction: 2014, total length: 1,281 mm, total height: 1,962 mm, total width: 895 mm, type of input current: three-phase, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, Stratasys Fortus 450mc industrial 3D printer in excellent condition, tested and fully functional. Professional-grade FDM technology for the production of parts in high-performance engineering thermoplastics. KEY FEATURES: - Build volume: 406 × 355 × 406 mm - Technology: FDM (Fused Deposition Modeling) with dual extruder - Materials: ULTEM 9085, ULTEM 1010, Nylon 12, Nylon 12CF (carbon fiber), PC, ABS-M30, ASA, Antero 800NA (PEKK) - Heated build chamber - Soluble support material - Year of manufacture: 2014 - Three-phase power supply APPLICATIONS: aerospace, defense, automotive, medical, industrial tooling, and functional prototyping. Particularly valued for its ability to print certifiable ULTEM. Cgedey U H Hmjpfx Aireu Equipment from a professional service bureau, maintained under controlled conditions. Available for inspection and operational testing prior to purchase. Location: Spain. Loading and transport can be arranged. Please inquire about the availability of consumables, accessories, and software licenses.

Condition: good (used), functionality: fully functional, Year of construction: 2014, overall weight: 41 kg, Technical Specifications: Build Volume: 30.5 L x 30.5 W x 45.7 H cm [12.0 L x 12.0 W x 18.0 H in] Layer Resolution: 100 microns [0.0039 in] Filament Diameter: 1.75 mm [0.069 in] Print Chamber: Enclosed and heated build chamber Connectivity: USB, Ethernet, Wi-Fi Cjdpfjqy E N Sjx Airsgu Condition Details: Usage Details: Used for small parts and prototypes. Printer's extruded filament readings may show inaccuracies. Overall Condition: Expected wear from use, few scratches, and dust due to infrequent use. Well-maintained. Included in the Kit: MakerBot Replicator Z18 3D Printer On-board Camera for Print Monitoring Swappable MakerBot Smart Extruder+ MakerBot Large PLA Filament (Various Sizes) Intuitive Display, Dial, Assisted Leveling Condition Note: Company-used printer, always stored in optimal conditions.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Fabr. / Serien Nr. 12.16.0072, Year of construction: 2016, operating hours: 6,250 h, total length: 2,000 mm, total height: 1,400 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, input current: 32 A, shaft length: 1,070 mm, temperature: 200 °C, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 10 °C, ambient temperature (max.): 35 °C, electrical fuse: 32 A, table width: 125 mm, tank capacity: 25 l, table length: 125 mm, repeat accuracy: 0.001 mm, Equipment: cooling unit, Manufacturer: SLM Solutions GmbH Type: SLM 125 HL Manufactured / Serial No.: 12.16.0072 Year of manufacture: 2016 Cjdpsy Uzcisfx Airsgu Weight: 800 kg Dimensions: Length x Width x Depth in mm (2,000x1,400x1,100) Documentation: yes Accessories: Spare parts such as flanges, pipe sections, substrate plates, coating lips, powder containers or bottles (photos available upon request) Special features: Compressed air 7-8 bar, inert gas (argon or nitrogen) 5 bar and cooling water are required for operation. Used SLM Solutions SLM 125 HL system for processing reactive and non-reactive powder materials. Stainless steel and aluminum (other materials possible) have been processed on this system. Design of process chamber, handling station, and powder extraction system in accordance with ATEX Directive II for flammable materials. Build volume (L x W x H): 125 x 125 x 125 mm (less substrate plate height) Build volume reduction (L x W x H): 50 x 50 x 50 mm (less substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 μm - 75 μm, 1 μm increments Min. feature size: 140 μm Focus diameter: 70 μm - 100 μm Max. scanning speed: 10 m/s Average protective gas consumption during build process: 0.6 l/min (argon) Average protective gas consumption during flood process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 570115, Year of construction: 2013, operating hours: 928 h, total length: 1,400 mm, total height: 1,260 mm, total width: 1,100 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, For sale is a Stratasys Objet500 PolyJet 3D printer. The machine is explicitly offered as defective/in need of repair, as several print heads need to be replaced. The Stratasys Objet500 series is a professional industrial 3D printing system based on PolyJet technology. PolyJet works with liquid photopolymer, which is applied layer by layer via print heads and cured by UV light. The Objet500 models are designed for high-resolution prototypes, design models, functional prototypes, molds, fixtures, and components with fine surface quality. After repair, the machine is suitable for professional applications in the field of rapid prototyping, product development, model making, design, medical technology, engineering, and small-series production. Depending on the version of the Objet500 series, multi-material or digital material applications are also possible. Stratasys describes the Objet500-Connex family as a triple-jetting platform with multiple material/color or material combination options. Condition: Defective / in need of repair. Based on current knowledge, some print heads need to be replaced. Therefore, the machine is explicitly sold without any functional guarantee. Commissioning or repair should be carried out by qualified personnel or an authorized Stratasys service partner. On-site inspection is possible by arrangement. The machine may be of interest as a repair project, a source of spare parts, or for reconditioning by a specialist company. Technical data according to the manufacturer's specifications for the Objet500 series: Manufacturer: Stratasys Model: Objet500 / Objet500 Connex series Process: PolyJet 3D printing Build volume: approx. 490 × 390 × 200 mm Layer thickness: up to 16 micrometers Resolution: 600 dpi X-axis / 600 dpi Y-axis / 1600 dpi Z-axis Machine dimensions: approx. 1,400 × 1,260 × 1,100 mm Machine weight: approx. 430 kg Material cabinet: approx. 330 × 1,170 × 640 mm Weight of material cabinet: approx. 76 kg Power supply, depending on the version: 100–120 V or 220–240 V, 50/60 Hz, 1-phase Support material, depending on the system: SUP705 / SUP706B, depending on version and material approval Cjdpfxsy Uwlaj Airsgu The technical specifications refer to publicly available manufacturer/support data for the Stratasys Objet500 series. Stratasys specifies the build volume for the Objet500 Connex 1-2-3 as 490 × 390 × 200 mm; weight and system size are stated in data sheets as approx. 430 kg and 1,400 × 1,260 × 1,100 mm. Note regarding the defect: The machine is not sold as operational. Known defect: print heads need to be replaced. Other defects cannot be ruled out. Therefore, the machine is explicitly sold as a defective used machine/repair device/source of spare parts. Terms of sale: Sale exclusively to commercial enterprises/businesses. The machine is sold as a used machine, as described or as inspected, excluding any liability for defects/warranty. No guarantee is provided. Errors and prior sale are subject to change. Inspection possible by arrangement. Sale takes place at the location.

Condition: used, functionality: fully functional, machine/vehicle number: ZanyTapir, Year of construction: 2025, operating hours: 251 h, total length: 700 mm, total height: 1,600 mm, total width: 700 mm, type of input current: AC, overall weight: 120 kg, input voltage: 230 V, Complete set consisting of Fuse 1, Fuse Blast, Fuse Sift, Mini 5-5 RG40104, and IVR 35/20-2 Sc Me For sale is a complete machine/system set in like-new condition, consisting of several coordinated components. Cjdpfxjy Uvikj Airogu Scope of delivery / set consists of: Fuse 1 Fuse Blast Fuse Sift Mini 5-5 RG40104 IVR 35/20-2 Sc Me This set is ideal for use in production, workshop, or industrial environments. The components are offered together as a complete set and are in very good, like-new condition. For operation or printing with white powder, the nitrogen generator Mini 5-5 RG40104 is required. A suitable compressor is offered separately in another listing, if required. Condition: like-new Availability: immediately / by arrangement Collection / shipping: by arrangement All information is provided to the best of our knowledge and belief. Subject to prior sale and errors. If you are interested or have any questions, please do not hesitate to contact us. We will gladly provide further pictures or information. Terms of sale: Sale exclusively to businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with exclusion of any warranty/liability for defects. No guarantee is given. Subject to errors and prior sale. Inspection possible by arrangement. Sale is ex-works.

Condition: good (used), functionality: fully functional, machine/vehicle number: G1850438, operating hours: 675 h, total length: 1,400 mm, total height: 1,100 mm, total width: 1,260 mm, type of input current: AC, overall weight: 430 kg, input voltage: 220 V, input current: 7 A, table width: 390 mm, table length: 490 mm, Stratasys J850 Digital Anatomy – professional PolyJet 3D printer for medical and anatomical models For sale is a Stratasys J850 Digital Anatomy, a high-quality industrial PolyJet 3D printer for realistic medical, anatomical, and functional models. This machine is ideally suited for clinics, medical device companies, research institutions, universities, dental/medical laboratories, and service providers in the field of 3D printing and prototyping. The J850 Digital Anatomy enables the printing of complex models with multiple materials, colors, and Shore hardness values in a single print job. This makes it possible to represent anatomical structures such as bones, vessels, tissues, organs, and transparent areas in a particularly realistic manner. Typical applications include surgical planning, training, demonstration models, product development in the medical technology sector, and patient-specific models. Technical specifications / Additional information: Total printing time: 675 hours Technology: PolyJet / Multi-material 3D printing Layer thickness: up to 14 µm Multi-material printing with up to 7 base materials Full-color and transparent printing possible Software: GrabCAD Print / GrabCAD Voxel Print Network connection: LAN / TCP-IP Cedpfx Aijy Urwwsregu Suitable for Digital Anatomy materials such as TissueMatrix, BoneMatrix, GelMatrix, and other PolyJet materials Condition / Storage notes: The machine is currently disassembled. Before disassembly, it was professionally flushed by Stratasys to prevent clogging or drying out of the print heads. As a result, the machine is properly prepared for transport or storage. Special features: Realistic haptics and appearance of anatomical models Very high level of detail and fine surface quality Printing of flexible, rigid, transparent, and colored areas in a single model Ideal for medical training, surgical preparation, and product development Industrial Stratasys quality Large build volume for complex models and small production runs Professionally flushed and prepared for transport/storage This machine is particularly interesting for users who want to produce high-quality medical models, demonstrators, implant/instrument prototypes, or realistic training models. Terms of sale: Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with the exclusion of any liability for defects/warranty. No guarantee is provided. Errors and prior sale excepted. Inspection possible by appointment. Sale is ex-works.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, total length: 1,290 mm, total height: 1,980 mm, total width: 900 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 240 V, input current: 40 A, temperature: 160 °C, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, positioning accuracy: 0.127 mm, electrical fuse: 40 A, repeat accuracy: 0.05 mm, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, space requirement length: 2,000 mm, space requirement height: 2,200 mm, noise level: 65 dB, space requirement width: 1,500 mm, High-performance industrial 3D printer based on FDM technology, designed for functional prototyping and low-volume production using certified engineering thermoplastics. The Stratasys Fortus 450mc is a proven platform for companies requiring repeatability, dimensional stability, and material traceability, making it suitable for automotive, aerospace, industrial equipment, and advanced R&D environments. The system is configured with dual extrusion heads in open material mode, enabling advanced process flexibility and compatibility with a broader range of FDM-grade thermoplastics, subject to parameter optimization and the thermal constraints of the platform. Key Features: - Heated build chamber (up to ~180°C) for superior layer adhesion and reduced warping - Industrial-grade repeatability for functional and end-use parts - Large build volume: 406 × 355 × 406 mm - Dual extrusion system (model + soluble support) - Closed material system for process stability and consistency - Compatible with Insight software for advanced process control Supported Materials: 🔹 Standard & Functional Polymers ABS-M30 → robust functional prototyping ASA → UV-resistant outdoor applications ABS-ESD7 → electrostatic dissipative components 🔹 High-Performance Polymers PC (Polycarbonate) → high impact resistance PC-ABS → balance between toughness and processability 🔹 Advanced Engineering Materials Nylon 12 (PA12) → wear resistance and fatigue durability Nylon 12CF (carbon fiber reinforced) → increased stiffness and dimensional stability 🔹 Aerospace-Grade Thermoplastics ULTEM 9085 → FST compliant (flame, smoke, toxicity) Cgedpfjy Ug Ecjx Airju ULTEM 1010 → maximum thermal resistance and mechanical strength

Condition: used, Year of construction: 2014, Ask for additional information! EU version. Cgedpfey Ud Ihox Airou

Condition: used, DWS DigitalWax 029X Cjdpfx Aijy Ud Hwerogu Vintage: 07/2020 Laser: Class 3 Voltage: 110–230V, 50–60 Hz Power: 400W

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 140L-C, Year of construction: 2022, operating hours: 5,854 h, total length: 1,450 mm, total height: 1,040 mm, total width: 1,250 mm, type of input current: AC, overall weight: 380 kg, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, electrical fuse: 16 A, table width: 500 mm, tank capacity: 140 l, table length: 700 mm, power: 8.3 kW (11.28 HP), travel speed (max.): 24,000 mm/min, number of print heads: 2, Refurbished Industrial Fused Filament Fabrication (FFF) Printer Includes: - 140L-C printer - Vibration-damped platform Cgsdpfxsxuh Nyo Airju - License for slicing software (Simplify3D) Original price €73,800 General Technical Data: Model: HAGE 3D-140L-C Year of manufacture: 2022 Operating hours: 5,854 h Printing technology: FFF (Fused Filament Fabrication) Filament diameter: 1.75 mm; open material system (not limited to specific manufacturers) Build area (L x W): 700 mm x 500 mm Maximum print height: 400 mm Maximum build volume: 140,000 cm³ Dimensions and Weight: Length: 1,450 mm Width: 1,250 mm Height: approx. 1,040 mm Weight: approx. 380 kg Temperature: Maximum printhead surface temperature: 300°C (optionally 450°C) Maximum build plate surface temperature: 180°C Maximum chamber temperature: 85°C Minimum operating temperature: +10°C Maximum operating temperature (ambient): +40°C Electrical Data: AC input: 400 V / 50 Hz Power supply: 24 V DC Connection: USB 3.0 / Ethernet Print Specifications: X-axis speed: up to 400 mm/s Y-axis speed: up to 400 mm/s Z-axis speed: up to 300 mm/min XY-plane print accuracy: < 0.1 mm Printer Control: Industrial controller (Sigmatek) Software: HAGE3D All documentation available Platform: 1,450 x 1,250 x 600 mm (LxWxH) Including storage compartments Including machine feet with vibration damping

Condition: new, SLS Materials for Industrial & Compact SLS 3D Printers High-performance SLS powders for professional additive manufacturing – compatible with a wide range of industrial and compact SLS 3D printers, including EOS, Formlabs, Sinterit, Sintratec, Nexa3D, and Raise3D systems. Our SLS powders undergo extensive in-house testing to ensure reliable processing, excellent mechanical properties, and consistent print quality across multiple machine platforms. Designed for both industrial production and compact SLS systems, IM3D materials deliver professional performance without restricting you to a specific ecosystem. Available Materials PA12 Balance – €45/kg Cost-effective, all-purpose PA12 powder with excellent refresh behavior and reliable mechanical properties. PA12 Performance – €49/kg Enhanced PA12 material with improved elongation at break and increased impact resistance for demanding functional applications. PA12 Glass Filled (PA12-GF) – €44/kg Stiff, dimensionally stable PA12 material reinforced for tooling and engineering parts. TPU88A – €45/kg Flexible SLS material with excellent elasticity, durability, and impact resistance. Machine Compatibility Compatible with a broad range of SLS systems, including: EOS / EOSINT: P100, P110, P350, P360, P380, P385, P390, P395, P396, P450, P500, P700, P730, P760, P770 Formlabs: Fuse 1, Fuse 1+ Sinterit: Lisa, Lisa Pro, Lisa X, Suzy Sintratec: Kit, S1, S2, S3 Nexa3D: QLS230, QLS236, QLS260 XYZ Systems: MfgPro230 xS, MfgPro236 xS Raise3D: RMS220 SLS4All Innova MK1 Loopzizo K-100 More compatibility information: im3d.shop/printer-compatibility OEM Material Alternatives We offer alternatives and/or drop-in replacements for materials from Formlabs, Sinterit, Sintratec, and Raise3D, including: Formlabs PA11, PA12, PA12 Tough, PA12-GF, TPU90A Sinterit Flexa Performance, PA11 Onyx, PA11.5, PA12 Eco, PA12 Industrial, PA12 Smooth Sintratec PA12, PA12-GF, TPU88A Raise3D PA Next, PA Next GB, PA11, PA12, PA12 GB, TPU86A, TPU90A OEM comparison overview: im3d.shop/compare/oem Why Choose IM3D SLS Materials? Broad compatibility across industrial and compact SLS systems Excellent refresh rates and low cost per part Stable processing and consistent print quality Industrial-grade performance without vendor lock-in In-house tested and production validated Technical onboarding and support available Csdpfx Aey Til Asiregu Fast shipping from the Netherlands

Condition: used, functionality: fully functional, machine/vehicle number: 570150, Year of construction: 2015, operating hours: 10,018 h, Stratasys Objet Connex 500 3D Printer (Purchased April 2015) A complete set of instruction manuals and safety data sheets for printing and cleaning materials is included. Spare Components: 2 x polyjet print head spares (new) 2 x thermistors (bagged) 1 x new bulb 1 x used bulb (left) – 3610 hours of use 1 x used bulb (right) – 4539 hours of use 2 x Assy Wiper Leaf (used) 2 x Roller Bath Blades Kit, Filter & Accessories – several items bagged together 1 x Eden MCB – in good condition Cgsdpey S Rp Hefx Aireu 4 x Support Cleaning Fluid (1 x OBJ-03216, 3 x OBJ-03214, all expire in February 2026) The unit was decommissioned by the authorized service contract team in July 2023 and no longer has a current service contract.

Condition: good (used), functionality: fully functional, machine/vehicle number: J5500144, Year of construction: 2020, operating hours: 5,336 h, Stratasys J55 Prime professional full-color PolyJet 3D printer available due to upgrade to a larger production system. The machine was professionally maintained during operation and is suitable for design studios, prototyping labs, universities, and research environments requiring high-quality multi-material and full-color models. Specifications Total printing hours: approx. 5,336 h Printheads recently replaced (approx. 250 h use) Professionally serviced during operational period Machine idle approx. 1 year so technical inspection recommended prior to use Original system value > €120,000 Stratasys ProAero Air Extractor (PolyJet air filtration unit) included Stratasys Scale / Scanner included Standard cables and connections included Codpfxeytg Rzj Airsgu Available service history documentation Typical applications Industrial design & product development Architecture and design prototypes Medical and educational models Multi-material and full-color prototyping Additive manufacturing research Machine available for inspection by appointment. Collection location: Belgium. Please contact us for additional information, photos, or inspection arrangements.

Condition: used, functionality: fully functional, Year of construction: 2016, total length: 100 mm, total height: 100 mm, total width: 95 mm, overall weight: 570 kg, input voltage: 230 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, power: 1.7 kW (2.31 HP), We are offering this used EOS M 100 dental 3D printer, manufactured in 2016, for sale. Serial number: SI 2764 Wiring diagram number: 250000543 Year of manufacture: 2016 Voltage (1~/N/PE): 230 V Voltage (2~/PE): 200–240 V Cgsdpfjy Szv Rex Airju Current consumption (1~/N/PE): 8 A Current consumption (2~/PE): 8 A Mains fuse rating (1~/N/PE): 16 A Mains fuse rating (2~/PE): 15 A Frequency (1~/N/PE): 50 Hz Frequency (2~/PE): 60 Hz Rated power: 1.7 kW Rated short-circuit current: 5 kA Total weight: 570 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 556 h, total length: 483 mm, total height: 914 mm, total width: 584 mm, type of input current: DC, overall weight: 48 kg, warranty duration: 16 months, feed length X-axis: 330 mm, feed length Y-axis: 270 mm, feed length Z-axis: 200 mm, For sale: Markforged X7 industrial 3D printer – in excellent/like-new condition We are offering a Markforged X7 industrial composite 3D printer for sale, purchased in 2024, with only 557 operating hours. This means the unit has seen very little use and is in outstanding condition. The machine comes with a valid manufacturer’s warranty. All consumables supplied at the time of purchase (in original drum packaging) are present, along with all original accessories, documentation, and packaging. Key features: Model: Markforged X7 Year of purchase: 2024 Operating hours: 557 hours Condition: used, excellent / like new Warranty: valid Accessories: full, factory Materials: complete set in packaging Cgjdpsydmnbefx Aireu Original drum packaging The Markforged X7 is an ideal solution for industrial prototyping, functional parts, tooling and fixtures, where high strength, precision, and reliability are essential. The machine can be inspected, tested, and is ready for immediate commissioning upon request.