Used Mulag Mulag Mkf 600 for sale (11,156)

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog Hedpfsx R Uw Sox Aahsp * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2010, Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. Hjdpjzcfzksfx Aahsp - .

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2019, Additional features: * Adapter group for mounting plate, size 3 * Drive for cutting head via PTO pump * Front-mounted mower for right and left-hand operation * Rear weight, parking frame, and hydraulic torsion frame Hjdpfx Aaoymmv Dshop * Hydraulic lateral displacement of the boom arm * Max. lateral reach 7,200 mm * Mulching blades, heavy-duty version * Mulching blade cutting head MK 1200 - working width 1,200 mm with Mähtronic * Proportional control with single-hand control panel Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Year of construction: 2018, condition: like new (used), PlateExakt 600 - Cliché mounting device/die-cutting cylinder  Age: 1992  Mounting device Hedpfxjl Ax Uwj Aahjp  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227”  Min. diam.: 60”  Width: 620mm

Condition: good (used), Heidelberg Eurobind 600 Perfect Binder Machine in perfect condition, with no signs of use. Ready to operate. Very low mileage. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Heidelberg Eurobind 600 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum production rate of up to 500 books per hour. Factory-installed cutter with additional scoring knives and cleaning brushes. Hsdpszgc Tkjfx Aahep Automatic cover feeding and creasing. The set includes documentation, waste extraction, fume extraction from the glue gun, and an Abac compressor.

Condition: excellent (used), Assortment of SK50 tool holders/tools (approx. 600 pieces). Hodpey U Ithjfx Aahop Item Condition: Good used condition.

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 Hsdjyc Nzuspfx Aahop • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: BRP2014C04, type of input current: three-phase, input voltage: 400 V, input current: 24 A, compressed air connection: 6 bar, We offer this used Meevo MKF MKF BR 320 fabric cutting machine, year of construction 2014. Machine type: Textile Cutting Machine Year of manufacture: 2014 Voltage: 400 V Current: 24 A Pressure: 6 bar Frequency: 50 Hz Short-circuit current: 10 kA Hodpfx Aezg Tu Seahep Weight: 1500 kg Number of phases: 3 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Hsdpfszc Rwwex Aahep Pallet/sheet dimensions: 760 x 1090 mm

Condition: used, axle configuration: 2 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 3.790 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left mm right mm Hsdpfx Aew N Nz Ioahjp We have the possibility to stack trailers!

Condition: used, axle configuration: 2 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 2.450 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left mm right mm We have the possibility to stack trailers! Hjdpfx Aaszb Eqpshjp

Condition: used, axle configuration: 2 axles, first registration: 11/2006, color: other, Year of construction: 2006, Empty weight: 2.450 kg Hodpfxezb Ekpe Aahop Axle 1: left 8 mm right 8 mm Axle 2: left 12 mm right 12mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: used, axle configuration: 2 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 2.450 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left mm right mm Hedjzb Enuspfx Aahop We have the possibility to stack trailers!

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 25,500 mm Number of bays / racking row: 09 units, each 2,700 mm Number of levels including base level: 02 units Technical data for capacity: Pallet spaces per bay: 06 units Pallet spaces per racking row: 54 units Total pallet spaces: 54 units Based on: Load carrier: Euro pallet EN 13698-1 Hedpfxezb U S Ao Aahjp Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.a. Weight per pallet (max.): 500 kg Included in the scope of supply: 10x Pallet racking uprights, used Material color: Sendzimir galvanized Frame type: P215 Profile dimensions: 120 x 100 x 2.50 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep 36x Pallet racking beams, used Material color: yellow Box profile: 80 x 50 mm Beam type: TRV1-270-085-30 CE Clear span: 2,700 mm Agraffe: 5 hooks Max. load per pair of beams 1,500 kg, with evenly distributed load 72x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 40x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 20x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2014, We are selling one used Mulag combination mower MKM 700. Year of manufacture: 2014. Serial number: 14S034642. Operating hours: approx. 3200 hours. Included: Hodpfx Aaszdm A Dohop - Verge mower MRK 300, serial number: 14S034643, operating hours approx. 424 hours. - Verge mowing head RMK 1200, serial number: 14A034644. - Flail mowing head MK1200Plus, serial number: 15A037354. WITHOUT REAR WEIGHT!! Further details are available upon request. Location: 07806 Neustadt/Orla.

Condition: new, Welding turntable KT 500, with 100mm pass-through hole Load capacity, horizontal: 600 kg, tilted: 300 kg Power consumption: AC 380V, 50 Hz Turning motor: AC 400W Table diameter: 700mm Hodpocat H Nofx Aahjp Height: 700mm, width: 800mm, length: 800mm Weight: 155 kg Tilting range, stepless, electrically adjustable: 0 – 90° Speed: 0.3 – 2.5 RPM Welding current transfer, max.: 500 A Includes: hand-held remote control, foot-operated remote control Optional extra: Quick-change chuck Diameter: 400mm, €550.00 CE marking/approval

Condition: used, Welding rotary table, 600 kg load capacity, electrically tiltable. Immediately available. Model KT 600 / 380 V. Connection: AC 380V, frequency control. Load capacity (horizontal/vertical): 600 kg / 300 kg. Rated center of gravity: 250 mm. Hsdpfx Aae Tic Rohjp Rated eccentricity: 150 mm. Table diameter: 1000 mm. Speed: 0.1 to 1.2 rpm. Rotation motor: 370 W. Tilt motor: 550 W. Dimensions: 1200 x 1100 x 850 mm.

Condition: excellent (used), Catalogue number 7268 TECHNICAL DATA - Loading hopper dimensions (top) L/W: 1000x600mm - Loading hopper dimensions (bottom) L/W: 650x600mm - Rotor width: 570mm - Motor: 15kW - Screen: 16x12mm - Knife size: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions L/W/H: 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German production – Not repainted – Very good condition – Used shredder Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Hodpoza Eabjfx Aahjp Net price: 29,900 PLN Net price: 7,120 EUR (based on rate 4.2 PLN/EUR) (Prices may vary with currency fluctuations)

Condition: excellent (used), The scope of delivery includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x workbench crossbeams, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbeam type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 600 mm Surface: possibly coated (possibly in two parts) 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Chipboard depth: 600 mm Surface: possibly coated Hedpfx Aji Ewqkeahop (possibly in two parts) 16x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes of the material. The material color may vary. The chipboards can be either coated or uncoated. - The workbenches are supplied unassembled; - The workbench stands are pre-assembled; - The production time is generally approximately 5 working days.

Condition: good (used), Technical data for pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Hodpfsww Im Hjx Aahep Material colour: blue Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Height: approx. 265 mm Pull-out: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, extra costs will apply, which can be provided upon request based on delivery location and order scope.

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Setup technical data: Number of rack rows: 01 pcs Length per rack row: 27,990 mm Number of compartments per rack row: 10 pcs Number of levels plus floor level: 03 pcs Volume technical data: Pallet locations per compartment: 12 pcs Pallet locations per rack row: 120 pcs Total pallet locations: 120 pcs Assumed configuration: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack frames, used Material colour: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, frame guards, and baseplates Frames are pre-assembled (bolted truss design) Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Material colour: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg (evenly distributed load) Note: The functionality of the beams is not affected by the holes; SSI project with heat-dust plates that were bolted on as per manufacturer’s instructions! 120x safety pins, used Material colour: Sendzimir galvanized To secure the crossbeams against unintentional lifting 44x anchor bolts, new Manufacturer: Hilti Model designation: HST2 V3 M12x105 5-25 Version: carbon steel, galvanized Approved for: cracked concrete 44x shims, used Version: completely galvanized For leveling the rack frames standing on uneven ground 01x load capacity sign With specifications for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be requested from us separately depending on the delivery location and scope. Hedpfxjyay D Io Aahep

Year of construction: 2018, condition: new, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Here, we offer you a new post protector from the manufacturer Mecalux for purchase. Hodpfod Rxyrox Aahop The post protector is suitable for frame profile widths of up to a maximum of 120 mm. The scope of delivery includes: 01x Post protector, new Material color: orange For stand profile width: approx. 120 mm Overall height: approx. 600 mm Overall width: approx. 132 mm Internal width: approx. 126 mm Overall depth: approx. 70 mm Deflector: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (center-to-center): approx. 400 mm Weight/piece: approx. 4.298 kg 04x Hex head screw: M8 x 25 mm 04x Lock nut: M8 04x Washers: M8 Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply. Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234 – visual inspection for all racking systems. Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), We offer you a used workbench frame for sale here. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x Workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled Hjdehvmmtepfx Aahsp (bolted frame) 04x Workbench crossbars, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x Locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbenches are supplied disassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), We are offering a used workbench frame for sale here. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 02x workbench crossbeams, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x locking pins, used Design: fully galvanized Hedpfx Aehvmnboahop The images serve to illustrate the material. The material color may vary. - The workbenches are delivered unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Your contacts within our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used post protector from the manufacturer Gemac for sale here. The post protector is suitable for a frame profile width of up to 90 mm. The scope of delivery includes: 01x Post protector, used Material color: cream white Design: V For stand profile width: approx. 90 mm Overall height: approx. 600 mm Overall width: approx. 113 mm Deflector height: approx. 60 mm Material thickness: approx. 4 mm Hole diameter: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight / piece: approx. 4.888 kg 02x Mounting plates, used Material color: cream white Dimensions: 130 x 91 mm (W x D) Material thickness: approx. 7 mm 04x Hex head screws: M10 x 35 mm 04x Serrated nuts: M10 04x Washers: M10 Our services at a glance: Hsdpfofdqkajx Aahop (Prices upon request) Assembly, installation Please note our general assembly conditions Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet (without unloading)