Used Mulag Kombinationmähgerät Mkm 700 for sale (5,898)

Condition: used, Year of construction: 2014, We are selling one used Mulag combination mower MKM 700. Year of manufacture: 2014. Serial number: 14S034642. Operating hours: approx. 3200 hours. Included: - Verge mower MRK 300, serial number: 14S034643, operating hours approx. 424 hours. Lrodpfxozdm A Dj Aiien - Verge mowing head RMK 1200, serial number: 14A034644. - Flail mowing head MK1200Plus, serial number: 15A037354. WITHOUT REAR WEIGHT!! Further details are available upon request. Location: 07806 Neustadt/Orla.

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Ljdpfx Asx R Uw Seiiorn Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Loded H Hmhopfx Aiijrn Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used upright frame for roller conveyors for sale here. When placing an order, please specify the required upright heights and upright depths! The scope of delivery includes: 1x Upright frame, used Material color: completely galvanized Upright height: 250 to 700 mm (freely selectable by you) Upright depth: 300 to 700 mm (freely selectable by you) Other heights and depths can be manufactured upon request. Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions. Lrsdpfx Aodf S Eysiisn - Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems. - Delivery with our own fleet (without unloading) Shipping costs upon request!

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2023, * 24V electrical system Lodpfx Aijzcf Ahjiorn * Front mounting plate, size 3 * Implement drive via front-mounted PTO, 1 ¾ inches * Base unit for single-person or two-person operation, designed for front mounting * Boom swivel range 190 degrees * Hydraulically actuated travel safety device * Hydraulic lateral displacement of the boom by 180 mm * Quick-change device for implements * Safety stop for electric cutter bar * Proportional control with mlcontrol permanent hydraulic system * CAN-bus technology * Multifunction lever mlbasic * Oil cooling system * Oil type HLP 46 * Boom system, basic version, 6.00 m from the center of the vehicle * Mechanical swivel device (swivel range 360°) * Paint: Orange RAL 2011 * Mowing head MK 1200 * Drive on the left * Cutter bar set MS * Ballast weight 1,050 kg Other: * Trade-in and purchase of vehicles and machines possible. * Selling price excludes transport and delivery. * No liability for printing and typographical errors. * Errors, changes and prior sale reserved. * Offer is non-binding. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2010, Other: Lredjzcfzkspfx Aiisn * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2016, Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. Lredpfx Aiozcfx Aoisn * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2019, Additional features: * Adapter group for mounting plate, size 3 * Drive for cutting head via PTO pump * Front-mounted mower for right and left-hand operation * Rear weight, parking frame, and hydraulic torsion frame * Hydraulic lateral displacement of the boom arm * Max. lateral reach 7,200 mm * Mulching blades, heavy-duty version * Mulching blade cutting head MK 1200 - working width 1,200 mm with Mähtronic * Proportional control with single-hand control panel Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee. Ledpfxeymmv Do Aiijrn

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg. Lsdpsy Tu Rqsfx Aiijrn

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C ° Lrsdpfx Aijd Sm Disijn

Condition: good (used), Renz Punch 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Side tables are also included. Manufacturer’s description: Perforating machine with a working width of up to 700 mm. Lrodpfx Aioy N Dwloion Designed for continuous operation and heavy loads. Foot pedal-activated operation. Perforation of up to 40 sheets (4.5 mm) in a single cycle. Quick and easy replacement of perforation strips. Available with or without a hanger cutout. Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. The machine operates on a 3-phase, 380V power supply. Weight: 325 kg. Made in Germany.

Condition: like new (used), Packaging line for shrink bags The line consists of: Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxWxH): 1060x440x200 mm Machine dimensions (LxWxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Ljdpfx Ajy Iv Iasiiern Power: 7.0 kW; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel housing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption: 50 l/min at 6 bar Automatic water supply control Water drainage Automatic water level control Integrated scale protection Timer for preheating water

Condition: good (used), Year of construction: 2007, DADAUX SLICO 700 Cutlet Slicer • Control panel protected with a cover against water ingress. • Textured loading surface prevents excessive friction of products intended for cutting. • Fully constructed from INOX 1810 • Hinged doors • 1 speed: 160 cuts/min Lodpfexx Tbpox Aiisrn • Adjustable cutting thickness from 0 to 40 mm • Electric feed system • Stepwise feed system • Cutting thickness adjustable during operation • Automatic pusher return • Suitable for high-pressure washing • CE compliant

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,808 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, New auction due to buyer's payment default! TECHNICAL DETAILS Working Area Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Arbor cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Lodpfjzck Txsx Aiiorn Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15600600437, cutting height (max.): 130 mm, cutting width (max.): 470 mm, saw blade diameter: 550 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 130 mm Max. cutting width at 90°: 470 mm Max. saw blade diameter: 550 mm Saw blade tiltable up to: 45° MACHINE DETAILS Ledpszdzmqsfx Aiisrn Main motor power: 5.5 kW Voltage: 400 V Current consumption: 12 A Fuse: 16 A Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,600 x 1,700 mm Weight: 500 kg Transport packages: 1

Condition: good (used), Year of construction: 2017, Pallet racking system, Jungheinrich, frame height min. 9.55m, 700kg / pallet location, approx. 6,175 locations, incl. existing support grates, etc. - used -: Lrsdpfx Aiszg Eaajijn Price ex works: €75,000 (net), disassembled, packed, and loaded! Price for larger quantities: upon request! Manufacturer: Jungheinrich Type: MPB Year of manufacture: 2017 Number of frames: approx. 288 units Upright profile: B18PS Frame depth: approx. 1.10m Racking height: min. 9.55m (according to nameplate, colleague measured 10.20m) Crossbeams: Length: 3.60m = approx. 2,520 units (profile E0414/15) Length: 2.70m = approx. 10 units Crossbeam height: approx. 15cm Load capacity per level / shelf load: 2,800kg = 700kg per pallet Field load: 14,000kg with 1st support at 2.05m Support grates: approx. 2,520 units for approx. 840 levels Dimensions of support grates: approx. Depth: approx. 1.12m x Width approx. 1.18m (= 3 units per 3.60m crossbeam level) In case of complete purchase, including existing end protection / side protection, spacers, and 2,520 support grates, etc. Condition: good Available: from approx. end of August 2026 Location: Euskirchen

Condition: new, Type: ST-700 Sealing length: 4 * 620 mm Vacuum pump: 40 m3/h Machine cycle: 20 - 40 sec. Voltage: 380 V, 50 Hz Electric power: 3.3 kW Machine dimension in cm: Width: 145 Lenght: 65 Height: 98 Delivery time: after advanced payment, 1 working day Lrodpfxeh Dp Nro Aiion

Condition: new, Machine type: Vacuum dough divider Lrsdpfeuuclpox Aiisn Model: VD 100-700 The dough dividing machine is the latest system of dough processing technology Cut the dough to the required weight without pressing and damaging it All surfaces that come in contact with the test are made of stainless steel Weight range: from 100gr to 700gr Capacity: 1800 - 2400 pieces per hour Dimensions: 1370/1780 x 650 x 1600 mm Weight: 420kg Electrical power: 1.75kW

Condition: used, Dicing machine Lodjwi Nmfspfx Aiiern DKS 700 DMS Stainless steel Electric power: 1,5kW Voltage: 380V / 50Hz Cutting chamber size: 700 x 200 x 220 mm

Condition: good (used), Disinfectant wash basin, hand wash basin, wash basin -Premo Aquadator: -Multifunctional: cleaning station -With MISCEA sensor fitting: with integrated soap and disinfection dispenser -With hygiene unit: -Stainless steel: sink Lrsdpfx Asb Uhnwoiijn -Basin height: 920 mm -Dimensions: 700/670/H1565 mm -Weight: 98 kg

Condition: used, Year of construction: 2021, machine/vehicle number: 7007490, Net weight: 14,300 kg, dimensions: length: 6.9 m, width: 2.5 m, height: 2.55 m, container size: 6.5 m, crusher number: 103334 Lrsdpfx Aioy Rvlqoijn

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Lrodpfszgwbcsx Aiion Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: Lredpfx Aezb Sadsiien - Milling unit, spindle height adjustable with handwheel, 0 - 125 mm - Milling spindle swivel up to 45° via handwheel - Degree indicator for swivel with digital display - Dovetail and T-slot table Z - Anodized table, length 1000 mm - Milling stop 240 - Milling stop rails 450, anodized aluminum - with 3-roller feed mechanism Availability: short notice Location: 63934 Flörsheim

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved. Lredpszgghfjfx Aiijn

Condition: used, Year of construction: 2011, cutting height (max.): 430 mm, No minimum price – guaranteed sale to the highest bidder! Lrjdpfx Aijzf H Szeijn TECHNICAL DETAILS Max. cutting height: 430 mm EQUIPMENT CE marking 1 saw blade unit (tilting) The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8580