Used Mts Max 20 Bar for sale (54,338)

Condition: good (used), Pressure testing device, measuring device -with trailing-pointer -Max. pressure: 20 bar Lrodpfxob A Rlye Ab Aeu -High-pressure hose -Dimensions: 400/160/H200 mm -Weight: 4 kg

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: L705226, functionality: fully functional, TECHNICAL DATA Manufacturer: Baron Max Model: KL-2680 Year: 2007 Serial Number: L705226 Control Unit: Fagor 8055TC WORKING CAPACITY Swing over bed: 670 mm. Center height to bed: 335 mm. Center height to top cross slide: 205 mm. Swing over cross slide: 400 mm. Dis. Between centers: 2100 mm. Width of bed: 450 mm. HEADSTOCK Spindle nose: A1-11 Spindle bore: 305 mm. Bar capacity: Ø 105 mm. Range of spindle speeds: 3 rang Gears Auto Shifting Spindle speeds range: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Taper in spindle: MT#6 SADDLE Longitudinal travel (Z-axis): 2000 mm. Cross-slider travel: 450 mm. Size of tool holder: Boring Tool: Ø 40 mm. O.D. Tool & Facing Tool: 25 mm. Ball screw (Dia x pitch): X-Axis: Ø25 mm. x P 5 mm. Z-Axis: Ø50 mm. x P 10 mm. TAIL STOCK Quill diameter: Ø105 mm. Quill travel: 220 mm. Quill taper: MT#5 ENGINE Spindle motor: 20HP Z-axis drive motor: 12 Nm. (FKM 44.3) X-axis drive motor: 6.3 Nm (FKM 42.3) Coolant pump motor: 1/4 HP X, Z-AXES FEED X axis rapid travel: 6 M/min. Z axis rapid travel: 8 M/min. GENERAL Power Required: 20 KVA. Lrodpfx Abovai Swe Aju Floor space (L x M x H): 4090x1950x1820 mm. Approx, machine weight: 4700 Kgs. EQUIPMENT Coolant system Manual 4-way tool post 4 Jaws Self-centering scrolling chuck Ø 12". Steady rest

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-C cold water trailer, similar but without ROM, Rioned, Karo, etc. Lrsdpofdvkrofx Ab Aju - Single-axle trailer with hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, rear lights and reflectors, tow hitch for 50 mm coupling, 13" tires and ABS. The following cold water models are available: CTR-C 43/180 | 43 l/min at 180 bar | Petrol engine: Honda GX690 17.7 kW CTR-C 55/160 | 55 l/min at 160 bar | Petrol engine: Honda GX690 17.7 kW CTR-C 60/150 | 60 l/min at 150 bar | Diesel engine: Kohler KDW 1003 19 kW CTR-C 20/350 | 20 l/min at 350 bar | Diesel engine: Kohler KDW 1003 19 kW - Dimensions: 3,045 x 1,390 x 1,190 - Unladen weight: approx. 350 kg - High-pressure pump: Comet TW Premium with integrated gearbox - HD hose reel: manual, with max. 60 m of 1/2" hose (included). Model CTR-C 55/160 OPTIONAL with electric HD hose reel. - Water supply hose reel: manual, with 35 m of 3/4" hose - Water tank: 400 l - Options such as remote control, booster pump, warning light, work light, aluminum hose cover, and accessories available upon request.

Condition: used, Year of construction: 1998, turning diameter 850 mm turning length 2000 mm turning diameter over slide rest 690 mm Lsdpeyqv Ansfx Ab Aeru control Siemens type 840 C Cooling through the spindle 23 bar centre height 450 mm spindle diameter in front bearing 200 mm spindle hollow 128 mm power capacity 60 kW turning speeds 7-1800 U/min Torque 7908 Nm workpiece weight 4000 kg tailstock quill diameter 160 mm tailstock quill taper MT 5 3 jaw chuck Forckrath 600 mm Tool changer 60 work piece power 30 kW turning speeds 56-3000 U/min weight of the machine ca. 18 t dimensions of the machine ca. 6,3x2,4x3,3 m The machine has been completely overhauled. Capto C6 milling chuck Double prism lathe chuck The machine has many optional accessories that can be purchased separately. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Rexroth SR 8 3842998020 swivel arm robot SN: 4810354, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lredpfxsqb Tdbo Ab Aju

Condition: ready for operation (used), Year of construction: 2017, Brand: HSM Model: V-Press 1160 max Year of construction: 2017 Press force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Lsdpfxo Aa Nxwj Ab Aoru Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of the workpiece 200mm - max. height of the workpiece 150mm - number of spindles 4: 1) horizontal, lower 200mm, 5.5kW 2) vertical, right 150mm, 4kW 3) vertical, left 150mm, 4kW 4) horizontal, upper 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm - spindle speed 6000 rpm From above: - 6 feeding rollers, toothed, including 2 double rollers - 1 feeding roller, rubber From below: - 1 feeding roller, toothed, twisted in the lower table - 3 side pressure rollers - 1 discharge roller, metal, smooth - all rollers are pneumatically pressed - length of the feeding table 2130mm - table adjustable up/down - central lubrication - electric setting of planing thickness - lifting motor 1.1kW - stepless feed speed adjustment on a frequency inverter Lrodpfxezu R N Ne Ab Asu - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 4x130mm - dimensions L/W/H 3550x1750x1800mm - weight approximately 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 49900 PLN Net price: 11605 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (the price may change in case of larger exchange rate fluctuations)

Condition: like new (used), Year of construction: 2008, operating hours: 125 h, functionality: fully functional, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning applications, including both small and very large projects. A key advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine – Complete with the following equipment: Lreds Ad U Acjpfx Ab Aju COLD JET AERO 75 DX DRY ICE (125 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator 2 x Nozzles – NEW One of the best machines in the world, with no electronics. This is what makes it reliable, and also keeps maintenance costs down. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us for more information. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Q 33.0 m³/h P 15,0 kW max. 20 bar Lsdpoikwapsfx Ab Aoru max. 110 C° H 90.0 m Nr. 4932869340 232 kg

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax - working table 3656 mm x 1956 mm - X - Y axis travel 3200 mm x 1575 mm - air cushion (allows material to be cut while submerged) - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software Ledpfjtmp T Dex Ab Aoru - integrated diamond orifice head - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Possibility to equip the machine with additional accessories for an extra charge.

Condition: new, functionality: fully functional, mileage: 100 km, power: 368 kW (500.34 HP), gearing type: automatic, fuel type: diesel, color: white, axle configuration: 8x4, first registration: 01/2027, Year of construction: 2026, operating hours: 10 h, Equipment: ABS, air conditioning, parking heater, traction control, New vehicle SB 2005 - Available from January 15, 2027 Standard superstructure DINO Vario 12m³ Volvo FH500 8x4-4 NLA MTS suction excavator DINO Vario 12m³ Standard equipment: MTS suction superstructure MTS double fan (patented) MTS material separation system (patented) Automatic filter cleaning Compressed air compressor 4.5m³/min, 8 bar POWERARM articulated arm with 7m suction hose 3 stabilizing supports PLC control with remote diagnostics Wireless remote control Set of demolition and air release tools Documentation TÜV inspection Optional extras: Container with stainless steel lining MEGAARM articulated arm Rotating suction pipe system IKE/PERFOR Suction & Drive & Steer HYDROSTAT Full fairing DESIGN High-pressure water system 30 l/min, 160 bar, 500 l tank Full fairing DESIGN Electric steering Storage box made of stainless steel (max. 1,200mm wide) Step ladder with 3 steps under the hose rack Step ladder with 3 steps (on both sides of the machine housing) Industrial equipment: Infinitely variable speed control for special models HBC wireless remote control with display (2x wireless with cable function) Accessories - Lighting: Lighting package I: 3 LED lights on the vehicle frame Lighting package II: 2 LED lights on the center joint of the articulated arm Lighting package III: LED light strips in the tool box Lighting package V: LED lights next to the articulated arm shaft Lighting package VIII: Light bar on the cover (rear) The general terms and conditions of MTS GmbH apply, which can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen Lredjz Ixf Aopfx Ab Aeu New vehicle Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment and other details at any time. This information is not binding and does not create any contractual obligations.

Year of construction: 2014, condition: good (used), Edge banding machine, edge bander, finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, sanding unit, edge banding unit -Handover: in its current condition as inspected -Accessories: see pictures Lredpfxsz Rxb Re Ab Aeu -Manufacturer: SCM HOLZKRAFT, Edge banding machine type Minimax ME 20 -Minimum workpiece length: 180 mm -Minimum workpiece width: 65 mm -Workpiece thickness: approx. 12 to 50 mm -Edge thickness (rolled edges / strip edges): 0.4 to 2 mm -Feed rate: max. 5 m/min -Adhesive system: Hot melt adhesive granules in the glue pot below -Dimensions: 2000/720/H1235 mm -Weight: 300 kg

Condition: used, Year of construction: 2008, Technical details: x-travel: 3002 mm y-travel: 2002 mm z-travel: 200 mm total power requirement: 9 kW cutting speed: 40 m/min high-pressure pump: max. 4.000 bar weight: ca. 5.800 kg dimensions: 3800 x 2900 x 2200 mm mm waterjet cutter, for cutting of miscellaneous materials, like f.e. Aluminium, Stainless steel, plastic ... accuracy: repeat accuracy (new machine) +/- 0.1 mm Lrjdpo Adr Ayefx Ab Aju accessories: Sand (several pallets) *

Condition: excellent (used), Year of construction: 2022, Make: HSM Model: V-Press 1160 max Year of manufacture: 2022 Pressing force: 594 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feeding opening dimensions: 119.5 cm x 65 cm Lodpfx Asz Snzieb Aoru

Condition: excellent (used), Year of construction: 2013, volume flow: 2.05 m³/h, operating pressure: 10 bar, pressure: 10 bar, Equipment: refrigerant dryer, FINI K-MAX 20-10 Screw Compressor The compressor is completely new. Motor: 15 kW Capacity: 2.05 m3/min Pressure: 10 bar Lrjdpfeyui Aiex Ab Aeu Year of manufacture: 2013 Operating hours: 2 h The compressor is fully operational.

Condition: used, Year of construction: 2025, operating hours: 400 h, functionality: fully functional, operating pressure: 1,000 bar, empty load weight: 3,500 kg, fuel: diesel, overall weight: 3,500 kg, HAMMELMANN AQUAJET 20 200 KW ENGINE 1000 BAR / 110 LITERS Ledjx Exmajpfx Ab Aoru OR CONVERSION TO 2800 BAR / 40 LITERS YEAR 2024 Tel. 6 E-mail: m z ol m a r @ o p . p l

Condition: used, mileage: 66,853 km, power: 96 kW (130.52 HP), first registration: 05/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, CO₂ emissions: 276 g/km, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, loading space length: 3,360 mm, loading space width: 2,100 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, onboard computer, power mirror, start-stop system, trailer coupling, = Additional Options and Accessories = - Automatic low beam headlights - Heated exterior mirrors - Electric front windows - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Remote central locking - Height-adjustable steering wheel - Leather steering wheel - Lumbar support - Front center armrest - Multifunctional steering wheel - Multimedia compatible - Fog lights - Radio - Rain sensor - Immobilizer - Tool kit - Windshield heating - Twin tires = Additional Information = General Information Ljdpfxjy Txz Tj Ab Aeru Number of doors: 2 Model range: August 2019 - July 2023 Cab: Single cab Technical Information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Top speed: 157 km/h Dimensions Length/Height: L2H1 Weights Unladen weight: 2,145 kg Payload: 1,355 kg GVWR: 3,500 kg Functional Crane: Maxilift DC.0.261, behind the cab Interior Interior: Black Consumption Average fuel consumption: 8.7 l/100km Maintenance, History, and Condition Number of owners: 1 APK (Technical Inspection): Valid until 06/2027 Number of keys: 1 (1 remote) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: excellent (used), Year of construction: 2010, MaXXturn 65 SMY (Siemens) CNC TURNING CENTER FOR COMPLETE MACHINING WITH POWERED TOOLS, C-AXIS, AND Y-AXIS Linear guide system, digital drive system. Spindle motor (ISM) on the main and counter spindle with thermal compensation system (liquid-cooled). State-of-the-art control technology SINUMERIK 840D with ShopTurn dialog programming. Main spindle: A2-6" connection (DIN 55026) * Drive power: 29 kW * Speed range: 0-5000 rpm Counter spindle: A2-6" connection (DIN 55026) * Drive power: 22 kW * Speed range: 0-7000 rpm Tool system: * 12-position tool turret VDI 30 radial, with direction logic for up to 12 powered tools * Power: max. 6.7 kW * Torque: max. 25 Nm * Speed range: 0-5000 rpm * C-axis on the main and counter spindle Y-axis: * Travel range: +/- 40 mm * Rapid traverse speed: 12 m/min Includes: * Coolant unit for spindle head * Hollow chuck incl. draw rod * Sinumerika 840D/PCU20 control * SHOPTURN dialog programming * RS 232 interface * Machine light * Coolant system incl. coolant pump 3.5 bar * Chuck flushing (additional pump (3.5 bar)) * Part ejector and flushing through the counter spindle * Control cabinet air conditioning * Hydraulic unit * Interface for chip conveyor * Documentation * CE certificate Lsdpfx Abjz Sq Sds Asru Machine no. S6AY1202 Year of manufacture: 2010

Condition: used, maximum load weight: 15,000 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 05/2005, loading space length: 11,050 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, total length: 11,190 mm, total width: 2,600 mm, total height: 3,870 mm, Equipment: ABS, Schmitz refrigerated box body for fresh produce transport 27 pallet spaces Aluminum ribbed floor Carrier Maxima 1300 refrigeration unit Lsdpfx Abez Ifizs Ajru SAF 10-ton forced steering axle LBW Bär 2000 kg, type BC2000S, approx. leaf spring dimensions 2250 x 2500 mm Tires 4 x 295/80R22.5, approx. 90% tread remaining Immediately available!

Condition: excellent (used), Year of construction: 2019, MAXXMILL 750 5-SIDE UNIVERSAL MACHINING CENTER SIEMENS 840D SL, 15,000 RPM 5-Side Universal Machining Center with integrated tool magazine, 30 positions Control: Sinumerik 840D-sl / OPERATE o SHOPMILL dialog programming o USB interface o Network drive / Ethernet o 22" TFT color touch monitor o 3D simulation o EMCONNECT Spindle: Motor spindle, water-cooled Spindle power: max. 20 kW Speed: 50 - 15000 RPM Torque: max. 100 Nm Tool holder: ISO 40 DIN 69871 Drawbar: ISO7388/2 Type B (not included in the basic machine) Travel: X=750+50mm, Y=610mm, Z=500mm Spindle nose – table distance: 150–650 mm Rapid traverse X-Y-Z: 30 m/min B-,C: 25 RPM Table: driven by worm gear Cast table, ground with T-slots Number – Width – Spacing: 5 – 14 – 100 Clamping area: 750 x 600 mm Table load maximum: 300 kg Tool changer: Drum magazine with 30 tool positions. Tool change time (chip to chip): 4.9s (VDI2852) Standard equipment: o Advanced Surface (Siemens option) o LED work area lighting o Spindle air blow-out device for cleaning the tool holder during tool change o Central lubrication o Coolant pump 2 bar o Coolant tank 250 liters o Leveling elements (5 pieces) o Tool magazine door for maintenance o Direct measuring system B-axis Year of manufacture: 2019 Machine no.: M-007.038.19 includes: 8AO-PRESET750SIE LASER DEVICE MARPOSS 8AO-VOLREMSIE630 ELECTRONIC HANDWHEEL 8AO-ADDREFMM750EI AIR - LIQUID COOLING 8AO-TRASPMM750 HINGED BAND CHIP CONVEYOR MM750 8AO-IMPLAVXX50 SPRAY GUN 8AO-COMM750XX01 STANDARD PACKAGING 8AO-MAGUT750XX05 TOOL MAGAZINE FOR 40 TOOLS MM750 8AO-CICMI750SIE AUTOMATIC WORKPIECE MEASUREMENT WIRELESS 8AO-SUPTAVOLAMM750 FRONT SUPPORT TABLE 8AO-APPLGRMM751 ROTARY TABLE THROUGH SPINDLE 8AO-PLU08S00119A AUTOMATIC LOADING DOOR RIGHT MM750 8AO-ILU08X00119A MACHINE ROOM FLUSHING Lrodpjz Anw Hjfx Ab Aju 8AO-ROTTSIE750 GLASS SCALE 3 AXES X-Y-Z SIEMENS 8AO-TRASFUM750MM 40-POSITION MAGAZINE ISO40 ACCORDING TO DIN69872 8AO-COPSUPXX750 UPPER MACHINE COVER MAXXMILL 750 8AO-INTROB012 STANDARD HANDLING INTERFACE PROFINET 8AO-CIN250LMSIE KINEMATIC MEASURING CYCLE 8AO-APPLEN750SIE DIRECT MEASURING SYSTEM B AND C 8AO-MM7503D 3D DATA MODEL MaXXmill 750

Condition: new, Bosch Aventics, R 412 000 393, R412000393, Rotary Module, Pemax: 8 bar Item condition: unused, from stock The goods originate from a company liquidation in the automotive industry and were temporarily stored in carousels. Minor storage marks may be present. H1R6A13K33-12_CK Lrodpfx Abslkbbbe Aou 2 kg You can find more rotary modules – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), mileage: 136,037 km, power: 125 kW (169.95 HP), first registration: 08/2023, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,140 mm, total width: 2,020 mm, total height: 2,670 mm, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,910 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - None - LED lamp - Manual - Radio/cassette - Reversing camera - Blind spot sensor - Partition = Notes = Configuration: 4x2, Unladen weight: 2430 kg, Gross vehicle weight: 3500 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Blue, Reversing camera, Lighting type: LED lamp, Air conditioning, Bluetooth, Blind spot sensor, Engine power: 125 kW (168 hp), Engine displacement: 1950 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Side paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Leather, Seat adjustment: Manual, L3H2 Maxi Mbux LED Camera Tow Hitch Carplay 3-seater/Empty!, Spare wheel, Tire type: Summer tires = Further Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 2,430 kg Payload: 1,070 kg GVW: 3,500 kg Functional Loading platform height: 68 cm Ledpoz I Nz Usfx Ab Aeru Interior Upholstery: Leather Maintenance APK (Technical Inspection): valid until 07.2028 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 512 € per month (delivery van, 72 months); Please inquire for further information and conditions.

Condition: used, Year of construction: 2000, functionality: not functional, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST Lrjdpfoy Splgox Ab Aou BARMAG EXTRUSION SPINNING LINE WITH 12 POSITION , 72 SPINNING ENDS FOR PET POY MICROFILAMENT YARN , evospeed • MANUFACTURER : BARMAG , GERMANY • AGE : INSTALLED IN 1998/ 9, STARTED UP IN 2000 ! BUT ONLY USED FOR 3-4 YEARS, THEREAFTER MAINTAINED & KEPT MOTHBALLED - 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK 1 EXTRUDER BARMAG 12 E 8 • SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS 3,5 CC/U • SPINNERETTES 100MM DIA, BOTTOM LOADED, DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO • POLYMER MANIFOLD EXTRUDER TO SPIN BEAM • DOWTHERM MANIFOLD FOR SPINBEAM AND POLYMER MANIFOLD • QUENCH SYSTEM INCLUDING FINISH SYSTEM, SPINFINISH JETS BY 'KYOCERA' • WITH CONVENTIONAL QUENCHING CABINETS + EVOSEPEED & RADIAL TYPE • TAKE UP UNITS, INCLUDING: • TAKE UP SECTIONS / PLATFORMS / LADDERS • COLD GODETS, ONE PAIR PER POSITION • INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS • YARN SUCTION SYSTEM • 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK • + ONE SPARE WINDER

Condition: used, Year of construction: 2011, operating hours: 66,800 h, clamping force: 100 kN, displacement volume: 85 cm³, injection pressure: 2,000 bar, overall weight: 4,500 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Lrjdpfezx Hkksx Ab Asu terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2025, L-Sealer for shrink wrap packaging, PRO version with strong sealing bar for continously precise packaging results. For middle sized product sizes, semi-automatic (manual infeed of product, automatic outfeed). Suitable to be combined with AMTEC SHRINKtunnel-POF-L PRO-Version - Technical specifications: 220V, 4kW; compressed air not necessary; max. speed of the machine in neutral: 20 cycles/minute; max. product dimensions (mm): L(100-500)xW(100-400)xH(2-280); max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions (mm): L1765xW810xH975; weight (net/gross): 150-200kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Ledpfxov Nlzyj Ab Asru Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.