Used Mrp Ra13 for sale (37)

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D08L/8182, Offer Number: D08L/8182 Machinetype: straightening and cutting machine Make: MRP Type: RA13 Constr. year: 1981 diameter range: 5-13 mm cutting length: 2000 mm speed - meters/min: 21 - 90 Kdsdpfxjwi Tkhe Ahbju Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: D06L/7646, Offer Number: D06L/7646 Machinetype: wire and strip bending machine Make: MRP Type: UB4 Constr. year: dia. range: 1-4 mm width of band: 20 mm output pieces/min: 80-150 feeding length: 240 mm Location: In our warehouse Ksdewi S Ncjpfx Ahbedu

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics Kdodpfxjzwl Dmo Ahbsu - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Kodey U Naiopfx Ahbedu Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, machine/vehicle number: 008694, X axis working area: 4320 mm Y axis working area: 1287 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Kdedozqz Nxepfx Ahbou Total number of drilling spindles: 16 Total number of tool changer positions: 31

Year of construction: 2017, condition: used, Roll lifter (roll manipulator) for lifting and rotating rolls. Rotates rolls from a vertical to a horizontal position for easy assembly and allows for lateral movement, enabling effortless pallet handling. Kodpszzkcvjfx Ahbjdu Lifting capacity: 100 kg Lifting height: approx. 155 cm

Condition: excellent (used), Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C, A axes: available Swivel machining: 2 working areas for swivel machining Work table: ATS-HTS-EPS Automatic console positioning system EPS 10 automatically positionable consoles Kodpfx Ahjzxbhwsbedu 2 locating pins per console 5-axis milling spindle: Power: 9 kW / 11 kW at 60 Hz Speed: up to 24,000 rpm Tool holder: HSK-F63 Liquid-cooled Drilling head BH 26 16 vertical drilling spindles 4 horizontal drilling spindles in the X direction 2 grooving units for grooves in the X and Y directions Vertical drilling spindles 16, Horizontal drilling spindle X = Tool changer: Chain tool changer with 21 tool positions Clamping systems: Uniclamp clamping system - 6 pieces Control system: BIESSE XP 600 Chip removal: Motorized conveyor belts for the removal of chips and machining waste Vacuum pump BECKER: Motor power 5.5 kW Conveying capacity: 244/286 m³/h Additional equipment: Numerous vacuum suction cups; 6 UNICLAMP clamping systems; Numerous HSK 63 tool holders; 2 large saw blades in the tool magazine Compressed air: 7-7.5 bar Total power: 25.3 kW Weight: 4200 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: Kdodexraimepfx Ahbsu 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 Kdedsg N Nlvepfx Ahbeu • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: used, maximum load weight: 14,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2014, next inspection (TÜV): 08/2023, loading space length: 6,800 mm, loading space width: 2,300 mm, Equipment: ABS, * ABS * BPW ECO-Plus axles * 5-chamber taillights * Duomatik air connection ----Body: Doll short timber body with 4 pairs of Doll Mammut stanchions. For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS WITHOUT GUARANTEE. INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase agreements, invoices, proforma invoices, orders, and sales discussions. Ksdpfx Ahok Afi Rebedu

Condition: used, Year of construction: 2023, Equipment: compressed air brake, 2 dosing rollers 4 scraper floor chains Pick-up feeler roller Carriage center Loadsensing / control line BG2 Loadsensing BG4 2-stage scraper floor motor Working lights / 3 x LED Side swing-out blade frame Access door to the loading area ISO / BUS operation Kjdpfx Ahstlq E Sobsdu

Condition: used, Year of construction: 1996, Item: AL-010188-Alfa Laval Separator MRPX314HGV-74C Alfa Laval MRPX 314 HGV-74C Milk Clarifier Separator Pre-owned Alfa Laval MRPX 314 HGV-74C self-cleaning clarifier separator in stainless steel construction. Manufactured by Alfa Laval Separation A/S, Søborg, Denmark. Complete unit in good used condition – ideal for clarification of milk or other low-solids dairy liquids. Technical Details Type: MRPX 314 HGV-74C Manufacturing No.: 2969923 Product No.: 881007-01-00 Bowl speed: approx. 8,000 rpm Drive motor: approx. 11 kW Operation: self-cleaning (automatic sludge discharge) Material: acid-resistant stainless steel (AISI 316 L) Bowl volume: approx. 6 L Capacity: up to 10,000 L/h for milk clarification Design: hermetic bottom feed with paring-disc liquid outlet Features • Continuous separation of milk and whey with minimal product loss • Gentle, hermetic feed system – prevents air entrainment and foaming • Automatic solids discharge system • Includes complete bowl assembly: - Top Part No.: 538544-80 - Bowl No.: 537872-80 - Bottom Part No.: 537503-64 Condition Machine disassembled, cleaned, and stored indoors in Denmark. Available for inspection by appointment. Kdsdpfexqqqljx Ahbsu Price Price on request (EXW Denmark)

Condition: ready for operation (used), Further information will follow. Ksdpfeq Aax Iex Ahbodu Please contact us if you are interested.

Condition: used, Year of construction: 2023, Control unit E-LinkPro ISObus 13 Blind blade with holder Running axle 540 rpm / gearbox Additional net roller holder Wheel chocks Press roller bearing / (regreasable) Fixed drawbar eye 40 mm / Kjdpfx Ajtlqxqshbedu

Condition: used, ALFA LAVAL Separator Kodpfxjxqm Rns Ahbodu Type: MRPX 318 HGV-74C / 88-1005-01-00 Manufacturing No.: 2969862 Worm Wheel Shaft: 1420–1500 rpm Tachometer: 1420–1500 rpm Revolution Counter: 110–125 rpm Alfa Laval MRPX 318 HGV-74C self-cleaning hermetic separator, complete stainless steel unit in good condition (dismantled). Manufacturing No.: 2969862 Product No.: 88-1005-01-00 Technical Details: - Bowl diameter: approx. 318 mm - Speed: approx. 8,000 rpm - Motor: approx. 22 kW - Capacity: approx. 15,000 – 25,000 L/h (depending on product) - Worm wheel shaft: 1420–1500 rpm - Tachometer: 1420–1500 rpm - Revolution counter: 110–125 rpm - Self-discharging (HGV type) Ideal for milk, whey, juice, or other liquid-solid separation in the dairy or food industry. Clean, complete machine ready for operation or integration into a production line. Location: Denmark Condition: Used / tested Price: Upon request Inspection: Possible by prior arrangement

Condition: good (used), input voltage: 400 V, type of input current: three-phase, MRPX514 complete with control cxabinette, motor, cyclone, tools for bowl and vibration damping feet Kedoucq Srepfx Ahbjdu

Condition: new, mileage: 10 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Vehicle: * Peugeot Boxer 2.2 with a 132 kW engine (179 hp) * Electrically adjustable exterior mirrors * DAB radio * Multifunction steering wheel * Bluetooth * Full-size spare wheel * Daytime running lights * Halogen headlights * Rearview camera * Lane keeping assist * Emergency braking assist * Driver fatigue sensor and attention detection * Airbag, driver side * Multifunction steering wheel * Body/Superstructure: Platform body with tarpaulin, full aluminum * Engine 2.2 L - 132 kW * Start/Stop system * Low emissions according to Euro 6e emission standard * Seats in the cab: Double passenger seat * Driver's seat: Active * Superstructure: * Premium platform body with tarpaulin, full aluminum * Loading area lighting * Sliding tarpaulin on the right * Full-size sideboards, 400 mm * Underrun protection * Roof with daylight entry * Lockable toolbox If the vehicle is not in stock, short delivery times are possible! * Ask us about a customized leasing or financing offer. * Net export possible * Delivery from €199 Didn't find the right vehicle? Configure your own vehicle! Whether it's the equipment, the superstructure, or the engine variant. All at a fair price! You can also purchase only the superstructures for your existing vehicle from us! Don't hesitate to contact us! * Images may show optional equipment that is not included in the base price. ---- Kodpfjz D Rqvjx Ahbsdu *The information provided on the internet is a non-binding description. It does not constitute guaranteed properties. The seller is not liable for typing and data transmission errors / changes / input errors. Please check the accuracy of the equipment features directly on the vehicle before purchase. Errors and prior sale are subject to change. This advertisement is to be understood as an invitation to submit an offer.

Condition: used, Year of construction: 2023, 3 dosing rollers Scraper floor gearbox protection 4 scraper floor chains Pick-up feeler roller / in the middle of the wagon Loadsensing control cable BG2 Loadsensing BG4 Working lights / 3 x LED Swing-out blade frame on the side Access door to the loading area ISO BUS / operating system Kedet Dxm Uepfx Ahbjdu

Condition: good (used), mileage: 77,580 km, power: 96 kW (130.52 HP), first registration: 08/2022, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,480 mm, total width: 1,960 mm, total height: 1,940 mm, loading space length: 2,720 mm, loading space width: 1,650 mm, loading space height: 1,400 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - None - LED lamp - Manual - Radio/cassette - Reversing camera - Fabric - Blind spot sensor - Partition = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 1899 kg, Gross vehicle weight: 3070 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 6, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Maintenance manual, Heated mirrors, Reversing camera, Lighting type: LED lamp, Seat heating, Bluetooth, Blind spot sensor, Engine power: 96 kW (129 Hp), Engine displacement: 1997 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: extended, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, L2H1 | Air conditioning | 3 seats | Multifunction steering wheel | Cruise control Euro 6!, Tire type: All-season tires = Additional Information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 215/65R16 Brakes: Drum brakes Kedpfx Ahsz Rmlkobjdu Axle 1: Tire tread left: 3 mm; Tire tread right: 6 mm; Suspension: Coil spring suspension Axle 2: Tire tread left: 4 mm; Tire tread right: 4 mm; Suspension: Leaf spring suspension Weights Unladen weight: 1,899 kg Payload: 1,171 kg GVW: 3,070 kg Functional Loading area height: 56 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 292 € per month (delivery van, 72 months); Ask for further information and conditions.

Condition: new, Ostas Beading Machine KMRP 2.5 Includes 4 Tool Sets Features • Main body made of steel • Main motor with reduction gearbox • Shafts with bronze bearings • Adjustable lower shaft • Specially hardened shafts • Forward and reverse movement of the lower shaft • Movable electric foot pedal • Supplied with 4 sets of rollers Technical Specifications: • Shaft length: 250 mm • Bending capacity: 2.5 mm • Roller diameter Ø: 98 mm • Throat depth: 160 mm • Motor speed: 5 m/min Kdjdpfxeytb I Uo Ahbsu • Motor: 1.5 kW • Dimensions (L-W-H): 1400 x 550 x 1120 mm • Weight: 350 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2900x1800x1100 mm Total power requirement 0 kW Weight 550 kg Kdodpfxov Uchze Ahbsu

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2900x1800x1100 mm Kodpjv Uchuofx Ahbjdu Total power requirement 1,5 kW Weight 550 kg

Condition: good (used), Year of construction: 2008, DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: amer, DC gear motor type MRP6 -Voltage: 36 V -Power: 500 watts -Speed: 170 rpm / i = 10 : 1 -Shaft: Ø 18 x 40 mm -Number: 5x engines available -Price: per piece -Dimensions: 310/130/H185 mm Kodevbzi Depfx Ahbodu -Weight: 9.8 kg/piece

Condition: new, plate thickness 1,2 mm roll diameter 62 mm Kdedpfx Ahjfv H Edobju throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Year of construction: 1998, condition: used, Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 Kjdpfsk D Nupsx Ahbodu -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg