Used Mpa 180 Electric Pasteurizer for sale (36,494)

Year of construction: 2026, condition: new, This machine is an electric pasteurizer which suitable for filling of bottles and bag-in-boxes. - 100% stainless steel materials - optionally with a bottle or a bag-in-box filling with digital scale Specifications: - Performance: 180 L/h (From 20°C to 80°C) - Electric demands: 18 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel Bjdpjfdz A Defx Amrodh - Dimensions: 600x1000x1750 mm - Weight: 85 kg IP65 certified electronics Heat exchanger: soft water Connections: DN 25 Level indicators for water and juice Thermometers: 2 pcs Automatic heat control, very easy to clean. Manual, gravitational type. With 4pcs wheels. It requires minimal maintenance. Accessories: manual BiB filler with digital scale OR two head bottle filler module Available options: - BiB AND bottle filler modules - Stainless steel juice pump for refilling the upper tank

Year of construction: 2026, condition: new, Specifications: - Power: 500 L / h (when heated from 20 ° C to 80 ° C) - Electricity requirement: 48 kW, 400 V - Material quality: WNr. 1.4301, AISI 304 Stainless steel - Size: 750x1950x1170mm - Weight: 350 kg (without fuel) - Heating medium: water (soft) Bodpfxsfdz Dks Amredh - IP65 certified electronics - Connectors: DN25 Hollander - with level indicator Temperature control is done at 2 points in the heating medium and once at the outlet of the product. The machine automatically controls the heating medium temperature. It is fully automatic. If the temperature of the juice to be pasteurized falls below the desired temperature, the output side of the machine is disabled and the juice circulates in the by-pass system until the temperature reaches the set level. The machine then starts charging again. At the end of the work, the tube spiral can be cleaned very easily with the help of a sponge ball. It requires minimal maintenance.

Year of construction: 2026, condition: new, This machine is an electric pasteurizer which suitable for filling of bottles and bag-in-boxes. - 100% stainless steel materials - optionally with a bottle or a bag-in-box filling with digital scale Specifications: - Performance: 300 L/h (From 20°C to 80°C) Bodpfxefdz Dio Amrodh - Electric demands: 27 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 600x1000x1850 mm - Weight: 115 kg - IP65 certified electronics - Heat exchanger: soft water - Connections: DN 25 - Level indicators for water and juice - Thermometers: 2 pcs Automatic heat control, very easy to clean. Manual, gravitational type. With 4pcs wheels. It requires minimal maintenance. Accessories: manual BiB filler with digital scale OR two head bottle filler module. Available options: - BiB AND bottle filler modules - Stainless steel juice pump for refilling the upper tank

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100375, functionality: fully functional, operating hours: 5 h, pressing force: 22 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bdjdpfxez H Tyle Amroh Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 2 axis controlled X-R axes Bending tool holder: Type AMADA Promecam / A / R1 Light work area front 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Type: KM180-750 AX All Electric Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: 👉 Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts. Key features: * Solid and durable construction for long-term operation * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial use * Good availability of spare parts Bodpfx Aow E E Evjmredh The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times. Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production. The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.

Condition: new, The pasteurizer is available with bottle filler oder Bag-in-Box filler Bodpfxeb Nt Tks Amredh capacity 180 l/h electric power 18 kW electric outlet 400V 50Hz (3 phases) fuse 32 A dimensions: width 600 mm height 1 650 mm weight 49 kg material 1.4301 / AISI 304 water supply tank 100 l juice supply tank 65 l suitable for fruit and vegetable juices scope of delivery 2 bottle filling valves

Year of construction: 2026, condition: new, The pasteurization system is fully automated with an industrial control system and touchscreen operation. If the temperature of the juices to be pasteurized drops below the desired temperature, the outlet side of the machine is shut down, and the juice is directed through the bypass until the desired temperature is reached again. Filling can then resume. At the end of the cycle, the spiral pipe can be easily cleaned with a sponge ball. Our system is low-maintenance. ⚙️ Technical Information Rated capacity: 400 L/h Power requirement: 27 kW, 400 V, 40 A Bedpfxjv Srl Ro Amrjdh Material: Wnr. 1.4301, AISI 304 stainless steel Water buffer: 80 L Dimensions: Length: 760 mm Width: 714 mm Height: 1637 mm Weight: 170 kg Optional with filling equipment

Year of construction: 2026, condition: new, Pasteurizing bath is suitable for the heat treatment of packaged fruit preparations (jam, wafers, herbs) or fermented preparations (vinegar, beer) and pickles. The packaging must be heat resistant as a glass or heat resistant plastic bag. The heat treatment technology is characterized by warming and holding, accurate temperature values and heat retention time by the product being treated and the user needs to know that the equipment only warms the treatment water and keeps it at the set temperature. Specifications: - Performance: 200 L/cycle - Electric demands: 12 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 500x1100x900 mm - Weight: 130 kg - IP65 certified electronics Bdedpefdzqlofx Amreh - Heat exchanger: soft water - Thermometers: 1 pcs Automatic heat control, very easy to clean. With 4pcs feet. It requires minimal maintenance.

Year of construction: 2026, condition: new, Pasteurizing bath is suitable for the heat treatment of packaged fruit preparations (jam, wafers, herbs) or fermented preparations (vinegar, beer) and pickles. The packaging must be heat resistant as a glass or heat resistant plastic bag. The heat treatment technology is characterized by warming and holding, accurate temperature values and heat retention time by the product being treated and the user needs to know that the equipment only warms the treatment water and keeps it at the set temperature. Specifications: Bdedjfdzrnopfx Amrjh - Performance: 400 L/cycle - Electric demands: 18 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 2500x1000x2000 mm - Weight: 300 kg - IP65 certified electronics - Heat exchanger: soft water - Thermometers: 1 pcs Automatic heat control, very easy to clean. With 4pcs feet. Requires minimal maintenance. Built-in electric hoist for basket lifting-moving.

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump Bedpfxot Uzito Amredh ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, The liquid comes into the tubular spiral surrounded by hot water which is heated by three electrical heating elements. The heat from the water heats up the liquid and eliminates the bacteria. Available outputs: 300 L/h, 500 L/h The pasteurizer is suitable to heat various liquids, including viscous liquids: juice, puree, wine, broth, milk and other. The maximum heating temperature of electric pasteurizer is 90 º C (194 °F). Bedjizbcnspfx Amrodh Juice comes into the tubular spiral which is surrounded by hot water. Tubular spiral is made of stainless steel. The boiler has an integrated spiral. This provides saving of space and also prevention of heat loss when pumping the water into external heat exchanger. As a result, this technology saves the heating energy up to 15-20 %. The heating power is 30 kW. Electric pasteurizer has a touch-screen panel with digital thermostat which provides an automatic water temperature control. Automatic regulation of liquid temperature ensures an easy way to change the filling temperature on digital display. The pasteurizer is fast and easy to clean. It can be washed by CIP cleaning together with our Bag in Box fillers. Machine has pivoting wheels. The pasteurizer is easy to clean and maintain. Electric pasteurizers work in perfect synergy with our Bag in Box fillers. They have a special connection between them which prevents liquid from overflowing and ensures easy work.

Condition: used, Electric Forklift, Micro Forklift STILL Type RX 50-10L Micro Compact Forklift Serial No. 515061C00057 Year of manufacture 2012 Load capacity: 1000 kg Lift height: 4900 mm Fork length: 1200 mm Fork carriage width: 980 mm Bdedpjw T U Dcofx Amrjh Overall height: 2160 mm Operating voltage: 24 Volt - Triplex mast with full free lift 1550 mm - Hydraulic side shifter - NEW BATTERY from year 7/2025, type 5 PzS 625 (24 Volt / 625 Ah) - Power steering - Automatic charger TRICOM XL, 24 Volt 120 Ah - 3-wheel solid rubber tyres, white, 180/70-8 - 2 front work lights - 1 rear work light - Blue safety warning light for reverse travel - 11,702 operating hours according to the hour meter - New TÜV safety inspection UVV (surcharge 150 EUR net) Length without forks: 1680 mm Total width: 1040 mm Own weight without battery: approx. 2157 kg Own weight with battery: approx. 2620 kg Good condition

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,085 h, load capacity: 6,000 kg, lifting height: 2,850 mm, free lift: 1,430 mm, fuel type: electric, mast type: duplex, construction height: 2,250 mm, fork carriage width: 1,450 mm, empty load weight: 10,720 kg, total length: 3,450 mm, drive type: Elektro, construction width: 1,700 mm, Compact forklift – Electric Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 355/65-15 – Non-marking Rear tire type: Superelastic Rear tire size: 2.50-15 – Non-marking Battery voltage: 96V Bdodpfx Amjz H Dm Ajroh Description: In addition to this Montini model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our warehouses in Hamburg and Gdańsk. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are always available. We also gladly buy your used forklifts outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this MR6 container. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We also gladly offer consignment sales for your vehicle. Full free lift, non-marking tires.

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Bedszb Dr Sspfx Amrsdh Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Year of construction: 2026, condition: new, Pasteurizing bath is suitable for the heat treatment of packaged fruit preparations (jam, wafers, herbs) or fermented preparations (vinegar, beer) and pickles. The packaging must be heat resistant as a glass or heat resistant plastic bag. The heat treatment technology is characterized by warming and holding, accurate temperature values and heat retention time by the product being treated and the user needs to know that the equipment only warms the treatment water and keeps it at the set temperature. Specifications: - Performance: 100 L/cycle - Electric demands: 9 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 500x1100x900 mm - Weight: 75 kg - IP65 certified electronics - Heat exchanger: soft water - Thermometers: 1 pcs - Automatic heat control, very easy to clean. Bedpfxsd Aq Ifo Amrodh - With 4pcs vibration-free feet. It requires minimal maintenance.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Additional equipment • Wire diameter: 0.1 – 0.3 mm Machine Benefits Technical Machine Benefits Bdjdpex D Iv Ssfx Amreh • Table dimensions: 840 x 640 mm • Max. Taper angle: 15/260 • Power supply: 3pe 50/60 hz ac200/220v (35 a) • Air source: 0. 5 mpa (75 l/min) • Pc technology with 15" lcd color screen, touch screen, and mouse • Electronic manual control panel • Machining support with 2d/3d cam and graphics verification Extra Information Machine still under power

Condition: used, Year of construction: 2015, Travel range: X 600 mm Y 400 mm Z 400 mm Bedpfsz D Egrex Amredh Including coolant system Water bath machine

Year of construction: 2026, condition: new, Specifications: - Performance: 700 L/h (From 20°C to 80°C) - Electric demands: 1 kW, 230 V, 6 A, monophase - Heat performance: 80kW (diesel burner) - Fuel: diesel fuel - Fuel consumption: 7,5 L/h - Flue gas outlet: 110mm chimney - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x1700x1170 mm - Weight: 380 kg Bdsdjfhb Itepfx Amrjh - IP65 certified electronics - Heat exchanger: soft water - Connections: DN 25 - Thermometers: 2 pcs - With automatic by-pass valve - Automatic heat control, very easy to clean - Automatic operation - flowthrough type - With 4pcs vibration-free feet - It requires minimal maintenance Available options: Two filler superstructure: BB top 180 semi-automatic BiB filler, 6 head bottle filler, puffer tank with level switches

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100372, functionality: fully functional, operating hours: 5 h, pressing force: 22 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe Bodpfx Aezyl I Rsmredh Back stop: 2 axis controlled X-R axes - 3 manual Fingers Bending tool holder: Type AMADA Promecam / A / R1 Light work area front and rear 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: reconditioned (used), Glimek SD-180 dough divider, used and refurbished. Weight range: 120–1600 g Variable speed with frequency converter Output: 750–1800 pieces/hour Dough knife made of stainless steel Discharge function: hopper extends to the dough knife Stainless steel hopper: 90 liters, approx. 63 kg of dough Oil reservoir: 17 liters, easy to fill Electrical data: 2.9 A, 50 Hz, 1.1 kW Bedpfx Amez Ia Irersdh Price upon request.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100371, functionality: fully functional, operating hours: 5 h, pressing force: 22 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Bjdpfxezyl Iqe Amredh Back stop: 2 axis controlled X-R axes Bending tool holder: Type AMADA Promecam / A / R1 Light work area front 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Bdsdszuvyajpfx Amreh Year of manufacture: 2014, available from the end of August.

Condition: used, functionality: fully functional, machine/vehicle number: HR33434, Year of construction: 2019, operating hours: 340 h, load capacity: 13,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: simplex, construction height: 3,000 mm, fork carriage width: 1,670 mm, fork length: 2,400 mm, empty load weight: 18,890 kg, total length: 3,970 mm, drive type: Elektro, construction width: 1,240 mm, Compact forklift truck - electric Chassis number: HR33434 Load center: 600 Fork width: 200 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tires Type: Solid rubber Front tires Size: 40x16x30 Bodpfx Ajwlw D Rsmrodh Front tires Condition: 60 - 80% Rear tires Type: Superelastic Rear tires Size: 300-15 Rear tires Condition: 60 - 80% Battery Volt: 120V Battery Ah: 1440Ah Battery type: PzS Battery year of construction: 2019 Battery condition: 60 - 80% Description: further equipment on request Rear work lights, Front work lights, Heating, Full cab, Air conditioning, CE certificate, Exterior mirrors, Rotating beacon, Windshield wiper, LED, Seat, radio, reversing camera, front camera, PSE load suspension system, additional hydraulics, bumper extension, load suspension system, lift truck with fork carriage, automatic mast tilt positioning, sliding window rear+left and right, steering column switch, 2 additional LED ASW on lift mast, 2 additional LED ASW at rear top of cab, LED rotating beacon, Blue Spot front and rear, reversing warning signal, lighting in accordance with STVZO, comfort driver's seat with air suspension,

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100374, functionality: fully functional, operating hours: 5 h, pressing force: 22 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 2 axis controlled X-R axes Bending tool holder: Type AMADA Promecam / A / R1 Bdsdpfx Amjzyl R Sorjh 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: used, functionality: fully functional, machine/vehicle number: HR33861, Year of construction: 2020, operating hours: 163 h, load capacity: 10,000 kg, lifting height: 3,800 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, empty load weight: 19,000 kg, total length: 3,760 mm, drive type: Elektro, Compact forklift - electric Chassis number: HR33861 Bsdpfxewlw Ehe Amredh Load center: 600 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: As good as new Technical condition: very good Front tires type: solid rubber Front tires size: 40x16x30 Front tires condition: 80 - 100% Rear tires type: super elastic Rear tires size: 300-15 Rear tires condition: 80 - 100% Battery voltage: 120V Battery Ah: 1240Ah Battery type: PzS Battery year of manufacture: 2020 Description: further equipment on request Fork positioner, Rear work light, front work light, STVZO, full cabin, CE certificate, outside mirror, rotating beacon, Windscreen wipers, LED, seat, 2 additional ASW, lighting in accordance with STVZO, reversing warning signal, LED rotating beacon, PSE load suspension system, front camera, reversing camera, Blue Spot front and rear, additional hydraulics, load carriage, speed limit of 10 km/h