Used Mowing Machine for sale (65,811)

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Kdjdpsxxb Rrjfx Ah Eot Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), functionality: fully functional, power: 17.65 kW (24.00 HP), fuel type: diesel, gearing type: hydrostat, Year of construction: 2015, operating hours: 530 h, Dvorak SPIDER ILD-02 Radio-controlled Large-area mower / Slope mower Technical information according to the manufacturer: Spider large-area and slope mower Areas of application: The remotely controlled SPIDER ILD is designed for maintaining uneven and difficult-to-access areas with slopes of up to 40° (with an optional cable winch, up to 55°). The mower is not only ideal for rough terrain, overgrown areas, and unkempt lawns but also for well-maintained parks. It is invaluable, especially for maintaining ditches around roads, cutting grass in orchards and nurseries, landfills, areas around power plants, airports, or mountain hotels, ski slopes, parks, and military areas. In addition, it can be used in agriculture and is often used for mowing golf courses and other sports facilities. Thanks to its unique drive system, it is very well suited for maintaining the surrounding terrain of reservoirs, rivers, and dams. The machine's exceptional environmental friendliness results from its low weight and soil-friendly drive system. The 4-wheel drive enables the mower to be used in wetlands and protected nature reserves. Mowing system: Mulching system Control: Radio remote control Cutting width: 123 cm Cutting height: Adjustable from 90 - 140 mm Cutting system: 4 blade bars with 8 blades Area output: Ø 3,500 m²/h | max. 7,000 m²/h Engine: Kawasaki FS 691V | 2 cylinders Engine power: 17.6 kW | 24 hp | 726 cc Kdedoztp Smspfx Ah Eet Transmission: Hydrostatic transmission 0 - 8 km/h Hour meter: Yes Mowing clutch: Electromagnetic with brake Drive: 4-wheel drive Steering: 4-wheel steering Wheels: Continuously rotatable by 360° Tires: 16 x 6.50 | V-profile Tank capacity / consumption: 16 liters / 3 - 3.8 l/h Weight: 335 kg Dimensions: 1640 x 1430 x 920 mm This SPIDER ILD02 with a cable winch was first commissioned in 2015, has 530 operating hours according to the meter, and is in a well-maintained overall condition with the usual signs of wear and tear for this class of equipment. The service has been recently performed, and it is ready for immediate use! - Net price: €15,882 / Gross price: €18,900 - Inspection / test drive is possible - Shipping costs nationwide (except islands): €400 - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: excellent (used), functionality: fully functional, power: 40.45 kW (55.00 HP), fuel type: diesel, Year of construction: 2019, operating hours: 840 h, Equipment: all wheel drive, car registration, soot filter, HOLDER C65 SC Municipal utility vehicle with mowing equipment Accessories: Kdsdpfx Aozcv Syjh Eet 1. WICKE FSML-165 mower with a maximum cutting width of 165 cm 2. STOLL Type 3000 container with a volume of approximately 1500 liters This HOLDER C65SC utility vehicle was first put into operation in 2019 and has only 840 operating hours according to the meter. It is in a well-maintained overall condition with the usual signs of wear and tear for this class of equipment. - Net price: €41,932 // Gross price: €49,900 - Inspection / test drive is possible at any time - Shipping can be arranged nationwide; costs depend on the distance! - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Kdjdjyhn A Iopfx Ah Eet Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization).

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine Kjdpfex D Tbmex Ah Ejdt ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, power: 31.7 kW (43.10 HP), overall weight: 1,374 kg, operation weight: 1,374 kg, operating hours: 2,585 h, We offer this used Toro Reelmaster 6700-D all-wheel drive mower. Operating hours: 2,585 h VAT can be stated separately. Rated power: 31.7 kW Rated speed: 3,000 rpm Operating weight: 1,374 kg Sound power level: 105 dB Serial number: 313000123 Country of origin: USA Ksdpfx Aoy Ib R Teh Esdt No guarantee or warranty. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, fuel type: gasoline, gearing type: other, Year of construction: 2021, operating hours: 144 h, AGRIA 9600 - 112 !!! 2nd generation, new model - version with Kawasaki engine!!! Remote-controlled mowing crawler with a 112cm sickle mulching deck This AGRIA 9600-112 mowing crawler was manufactured in 2021, was used as a demonstration unit, has only approximately 144 operating hours according to the meter, and is in very good overall condition with only minor signs of use and wear. The current list price is €45,900. - Net price is €26,806 // Gross price is €31,900 - Inspection / test drive is welcome! - Shipping costs €400 throughout Germany via a freight forwarder! Kdedpfeztp Dvex Ah Eet - Financing / leasing can be arranged individually for you.

Condition: used, machine/vehicle number: 8427, * Amazone Horse Hopper 1500 Smart Cut * Working width: 1.50 m * 1,500 L collection hopper capacity * Tractor 3-point linkage * H60 wing blades * Support rollers * Mulching device * PTO shaft with overrunning clutch * Collection hopper with hydraulic floor emptying * Rotation speed: 2,650 rpm * Fill level indicator -----Internal vehicle number: 8427 Kedpfxsrhy H Re Ah Eedt WhatsApp support available! If you have any questions about the machine or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp ----Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2021, Bed Dimension 1,270mm x 254mm. (3 'T' Slots 16mm x 63mm). Maximum Table Load 350Kg. Axis Travel 'X'=750mm, 'Y'=384mm, 'Z'=406mm. Quill Travel 115mm. Spindle Taper SK30. Spindle Speed Range 60-4,200rpm (Motor 2.25KW). Powered Drawbar. S/No. 13279 (2021) Please note a loading charge of £50 + VAT to be added to buyer's invoice. Kodpez Dg H Hsfx Ah Esdt With Coolant System, Quantity Of Assorted Toolholders, Table Guarding, Drawbar, Work Light & Manual. Approx Dimensions L3,220 x W2,580 x H2,180mm. Weight 1,250kg.

Condition: used, power: 10 kW (13.60 HP), first registration: 09/2013, overall weight: 2,300 kg, color: red, maximum load weight: 5,000 kg, driver cabin: other, gearing type: other, emission class: none, Year of construction: 2013, * German equipment * Condition as shown in the photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Dücker MK25 mower combination consists of base unit, RSM mower & DUA800 arm * We will gladly send you a video of the MK25 mower combination * Complete documentation * Dücker MK25 mower combination, year of manufacture 2013 * Mower combination consisting of embankment mower and verge mower on arms. For municipal carrier vehicles and tractors with municipal plate sizes Gr. 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touch display. Usable on both left and right side. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 arm with 3-part boom and telescopic section. Reach from vehicle center up to 7.80 m. Hydraulic lateral shift up to 1.60 m. Suitable for right and left operation. Swivel angle 270°. Standard arm relief. Float position. VMS 1200 flail mower head, working width 1.20 m. * RSM arm: Computer-assisted control with automated buttons via control panel. Optimal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m sideways and 3.20 m forwards. Conversion between right and left operation possible. TMK 1300 flail mower head, working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Attachment: municipal plate size 3 | municipal plate size 5. Reach: 7.80 m | 3.60 m. Arm swivel angle: 270°. Hydraulic lateral shift: 1.6 m. Maximum PTO speed: 710 rpm. Required vehicle hydraulic capacity: minimum 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer generally DOES NOT include new TÜV inspection, new DGUV, new SP, or new UVV. Kodoxl Snuopfx Ah Eodt You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and test of the item to avoid any misconceptions about the condition and suitability for the buyer. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently confirm the condition and features of the equipment/vehicles. Subject to prior sale, changes, and errors.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Kdedpsz Apllefx Ah Est Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Kjdpfx Ahsz Aplxj Esdt Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off Kdedpfx Ahex R Uw So Ejt * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Kdjdpjzkbirjfx Ah Ejt Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Kedszzzm Espfx Ah Esdt Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system.

Condition: used, Year of construction: 2023, rear tire size: 0%, We are offering for sale one used Bergmann M 201 crawler from year 2023 with approximately 155 operating hours. Equipment: radio-controlled crawler, payload 500 kg, unladen weight 1200 kg, lifting capacity 6000 N, height 1287 mm, length 2087 mm, width 1350 mm, rubber tracks 2800 mm wide, angled tread for slope stability, self-cleaning feature, water-cooled 3-cylinder Hatz diesel engine, output 42 kW at 2800 rpm, radiator fan with reversible drive for self-cleaning, hydrostatic travel drive, 0-8.5 km/h. 12V system, LED headlights, hydraulic multi-coupler, one high-performance hydraulic circuit up to 85 L/min, two auxiliary hydraulic circuits up to 10 L/min each, including Müthing mulcher with a working width of 1.40 m, including Seppi mulcher for processing brush and wood up to a diameter of 15 cm. Kdjdpfxjyq Aw Ss Ah Eet Further details available on request. Location: 93095 Hagelstadt.

Condition: used, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, color: red, axle configuration: 4x2, operation weight: 753 kg, empty load weight: 753 kg, fuel: diesel, gearing type: hydrostat, Year of construction: 2015, operating hours: 1,350 h, Equipment: differential lock, self-propelled working machine: + Gianni Ferrari + PG280 D + Year of manufacture: 2015 + 1,500 operating hours (according to previous owner) + Hydrostatic drive + 3-cylinder Kubota 902 diesel engine, 898cc, 20hp Kdedpfx Ajyyynhjh Est + High dump + Protective bar + Lighting + Rear-wheel steering + Rotary mower deck, 130cm, 2 blades + Unladen weight: 753kg + 800l grass collection container + Differential lock + Municipal vehicle from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and prior sale reserved!

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope. Kdjdpfez A H Sgox Ah Ejt

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs Kdedpfx Ahsy Ni Ivs Est For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Kedeyahv Sepfx Ah Eedt Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, Year of construction: 2008, XYZ SMX 5000 CNC Vertical Turret Milling Machine With Prototrak SMX Control Table Dimension 1,930 x 355mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,524mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (7.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11100 (2008). Kdodpfxezvp E Es Ah Eet With Coolant System, Table Guarding, Work Light, Vertex Heavy Duty Vice (Jaw Width 205mm), Indexing Head 3 Jaw Chuck 200mm, Centre Height 170mm, 8 Drawer Steel Cabinet With Contents Of Spindle Tooling & Clamp Sets. Approx Overall Dimensions L5,805 x W3,143 x H2,690mm. Weight 3,100kg. Note: Machine Had Control Upgrade 2023.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Kedpfjzlpgnex Ah Esdt

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Kodpfx Aszy Upkjh Ejdt Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, power: 17 kW (23.11 HP), overall weight: 1,140 kg, fuel type: gasoline, color: white, axle configuration: 2 axles, operation weight: 636 kg, empty load weight: 636 kg, fuel: regular/benzine 91, gearing type: hydrostat, Year of construction: 2016, operating hours: 760 h, Equipment: additional headlights, all wheel drive, Mulching mower: + Etesia + Buffalo HVHPX + Year of manufacture: 2016 + 760 operating hours + All-wheel drive + Lighting + Amber beacon + Hydrostatic drive + Height-adjustable mower deck, 124 cm cutting width + Mulching kit with deflector hood + High discharge up to 180 cm + Vanguard petrol engine, 627cc; 23 HP + Unladen weight: 636 kg; permissible GVW: 1,140 kg Ksdpfxsymynae Ah Eedt + Battery isolation switch + Area performance: 15,000 m²/h + From municipal ownership Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and typing mistakes possible, subject to prior sale!

Condition: used, Year of construction: 2013, XYZ Proturn SLX1630 CNC/Manual Lathe. S/No. 16-P-10008-095 (2013) with Proto Trak SLX Control, 200mm Diameter 3 Jaw Chuck, Swing Over Bed 440mm Diameter, Distance between Centres 700mm, 3 Position QCTP, Spindle Speeds to 2500rpm Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Ksdpfx Aozy N I Ujh Eedt