Used Mg Ar360 for sale (870)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, Glastronic-made 1600mm vertical glass washing and drying machine. Nledpfxez Ngyre Ag Ijh The machine is in a well-maintained and inspected condition, ready for immediate use. New squeegee rubbers, new bearings. Working direction: left to right. Maximum washable glass height: 1600mm. Number of brushes: 4. Drying fan. Stainless steel cabin. Water heating. Backlighting. Stop sensor. The machine has been fully inspected, cleaned, and is in perfect working order and can be viewed at our facility!

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. Nedpfeyzr Nmex Ag Iolh - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Manufacturer - N&N Nadratowski. Nsdpfx Agjwplc As Islh Model - MG-450/160. Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: used, Year of construction: 2017, controller model: NEXUS, _____ Description: Year of manuf. : 2017 Material thickness : 14 mm Technical data Working length:3,100 mm Bending capacity / Folding capacity:14 / 12 mm Upper roll diameter:290 mm Lower roll diameter:270 mm Side roll diameter:210 mm Main motor power:7.5 kW Machine length:4,475 mm Machine width:1,460 mm Nodpfezuikxex Ag Iolh Machine height:1,520 mm Machine weight:8,000 kg Control system:NEXUS TouchScreen DNC equipment :- NEXUS DNC control system with touchscreen interface :Programming and operation options: :1. Manual mode – all movements controlled via joystick :2. Teach-in mode – saving of positions :3. Input of values for the rollers via the screen :Storage capacity for 300 programmes : :- Rollers made from C45 alloy steel, induction-hardened :to 50–55 HRC : :- Conical bending unit with both :side rollers set at an angle, lower roller set at an angle and :bearing with hardened guide roller : :- Calibration unit for re-rounding :welded tubes : :- Brake for the upper roller for greater precision when :positioning the material.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology Nodpfx Ajzwl Dmeg Iolh - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: used, Year of construction: 2014, Manufacturer: N&N Model: MG-450EFW/160 Year: 2014 Condition: Used Serial Number: 1047 Stock Number: 3438J Mixer: double paddle mixer, intermeshing Njdoz D Dfyopfx Ag Iolh Capacity: 450 litres Mixing speed: 5 - 40 RPM, variable speed Hole plate diameter: 160 mm Infeed height: 1620 mm Outfeed height: 740 mm Compressed air: 6 - 8 Bar Power: 3 x 400, 50Hz, 36.3kW Dimensions: 2350 x 1650 x 2700 mm Weight: 1815 kg With PZ-2/250 lifter for 200L tote bins, pneumatic lid and safety cover over head

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm Nodpoz Ad Rcjfx Ag Ielh

Year of construction: 2023, operating hours: 400 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10948/11/23, For sale is a like-new MHG rotary table blasting system – an injector sandblasting system, type SMG 260 DTTA, for blasting components on a rotary table. The system was manufactured in 2022 and has only approximately 400 operating hours. Blasting was carried out exclusively with glass beads, resulting in minimal wear and tear, leaving the system in almost new condition. The blasting system has 3 blasting stations with a total of 8 automatic blasting nozzles. The injector blasting nozzles are flexibly lockable and adjustable, allowing them to be precisely aligned with different components (max. component height 350 mm). Loading is done via 2 airlocks with an automatic compressed air blow-off device. A side viewing window with an impact protection flap, 2 side doors, a safety light curtain, and a release mechanism ensure control and safety. The abrasive material storage container is equipped with a level indicator (MIN). The system is controlled via a Siemens SIMATIC HMI control system with a KTP700 display. A 30 m³ dust collector ensures the necessary vacuum and room air extraction; the system's power consumption is 6 kW. The system has already been partially disassembled and is ready for pickup. Manufacturer: MHG Strahlanlagen GmbH, Düsseldorf Type: Injector sandblasting system SMG 260 DTTA (rotary table blasting system) Year of manufacture: 2023 Operating hours: approx. 400 hours Condition: Almost new – blasted exclusively with glass beads, minimal wear Housing color: RAL 7021 Blasting stations: 3 blasting stations with a total of 8 automatic blasting nozzles Blasting nozzles: Injector blasting nozzles, flexibly lockable and adjustable Max. component height: 350 mm Airlocks: 2 airlocks with automatic compressed air blow-off device Viewing window: Side viewing window with impact protection flap Access: 2 side doors, safety light curtain, release mechanism Nljdpfx Ae Adzhrsg Ioh Abrasive material container: With level indicator (MIN) Control system: Siemens SIMATIC HMI, KTP700 display Power consumption: 6 kW Dust collector: 30 m³ dust collector for vacuum and room air extraction Location: 35216 Biedenkopf

Year of construction: 2004, condition: like new (used), Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton. Nodpfeiwa Hcsx Ag Islh -Hydraulic reservoir oil 1200 liters -High pressure hydraulic power unit multi pumps run on 100Hp electric motor . -Working speed variable slow-fast. -Emergency shut-down devices in compliance with safety requirement. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation books along with the machine On request we supply additional set of rolls interchangeable to seat and bend the wanted profiles. Capacity table max.: – HEB 500 -INP 600 *-ANGLE 200 MM *-T300 MM *-20″ PIPE SIZE *-UNP 500 MM *-FLATBAR 300X80 MM *-SQUAREBAR 200 MM *-PIPE/TUBE UP TO 508MM see capacity chart in enclosed

Year of construction: 2008, condition: good (used), functionality: fully functional, Complete Industrial Recycling Line for Plastic and Non-Ferrous Metal Separation A presentation video is available. A presentation video of the complete recycling line, recorded before dismantling, is available and can be provided to interested buyers upon request. The video shows the complete configuration of the installation prior to disassembly. Nljdpfxsznmgqe Ag Ioh A complete industrial recycling line, suitable for processing rigid plastics and other recyclable materials, is offered for sale. The installation is in good overall condition, featuring a robust industrial design and high-quality European components. Main components: Feed hopper MEM 46 MG Hammer Mill (Italy) IFE Vibrating Feeder / Vibrating Screen Eddy Current Separator Conveyor belts Electrical control cabinets Steel supporting structure Technical information Hammer Mill Manufacturer: MEM – Società Generale Macchine Edili S.p.A. (Italy) Model: MEM 46 MG Year of manufacture: 2008 Hammer Mill Weight: approx. 7,080 kg Suitable for processing: Rigid plastics (PVC, PE, PP, ABS, PC, etc.) Plastic profiles Plastic containers Mixed recyclable materials Non-ferrous metal recovery Aluminum separation Advantages: Complete recycling line Heavy-duty industrial construction European manufacturers Robust and reliable equipment Ready for installation Ideal for recycling companies looking to increase processing capacity The line can be inspected by appointment. Additional photos and videos are available upon request.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1289892, FREWITT MG-800 OSCILLATING SCREENING AND GRANULATING MACHINE Pharmaceutical version – Stainless steel – Comprehensive documentation DESCRIPTION For sale is a Frewitt MG-800 oscillating screening and granulating machine in high-quality stainless steel/pharmaceutical version. The machine is in very good and well-maintained condition and is fully functional. The MG-800 is suitable for the controlled crushing, granulation and screening of products, especially in the pharmaceutical, chemical and food industries. The oscillating operating principle, in combination with interchangeable screen inserts, allows for adaptation to different products and desired particle sizes. PHARMACEUTICAL/STAINLESS STEEL VERSION The original Frewitt specification documents a high-quality stainless steel design: - Machine body stainless steel 1.4401 - Product-contacting parts stainless steel 1.4301 Nljdpfx Agevt Sywo Ijh - Product-contacting interior surfaces polished - High-quality, hygienic design - Enclosed machine design The system was designed for professional use in demanding production environments. TECHNICAL DATA Manufacturer: Frewitt, Switzerland Model: MG-800 Machine No.: 1289892 Machine type: Oscillating screening/granulating machine Voltage: 380 V Frequency: 50 Hz Current consumption: 4.4 A Version: Stainless steel / Pharmaceutical version EQUIPMENT - Frewitt MG-800 granulating machine - Stainless steel feeding system - Stainless steel discharge system - Rotor - Screen basket - Extensive selection of various screen inserts - Infinitely adjustable speed control - Protection and safety devices - Separate operating/control unit - Sturdy stainless steel base - Extensive stainless steel piping and connections The various screen inserts available allow for flexible adaptation to different products and desired granule or particle sizes. DOCUMENTATION Extensive original Frewitt documentation is available for the machine, including: - Technical documents - Original drawings - Design drawings - Specification and material specifications - Spare parts/component information The available original documentation is particularly advantageous for use in pharmaceutical and industrial environments. CONDITION / FUNCTION The machine is in very good used condition and is fully functional. Inspection and test run are possible by arrangement at our premises. Price on request. Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Nedowhk E Hepfx Ag Ielh Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Nedozc D Enjpfx Ag Ijlh Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Njdpfx Agjwmqwyo Ijlh

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, Rotary table 1,250 x 1,400 mm (interference circle 1,700 mm) Heidenhain 530 Diagonal milling head with 1° x 1° indexing Speed up to 5,000 rpm Tool holder SK50 Tool changer with 40 positions Internal coolant supply with 19 bar Chip conveyor in longitudinal direction Njdpfx Agsx Iuccs Islh

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, replacement drive components, and an Extract DUO two-bag dust extraction unit. The machine has seen limited operating hours and has undergone annual brand-name servicing. The machine can be inspected while in operation. The selling price includes professional disassembly and crane loading onto a truck. The organization and costs of transport are the responsibility of the buyer. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min Nlodpfx Ajz E Rinog Ish X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part, and an additional 8 on the fixed part. Extract Duo dust extraction unit technical specifications: Fan power kW: 5.5 Filter area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Delivered air volume m3/h: 6000

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English Nlodpfsyzim Ajx Ag Ioh -Dimension see layout drw in enclosed

Condition: excellent (used), Column Drilling Machine Inventory no.: 3719 Manufacturer: Huvema Model: HU MG 40 S * Drilling capacity in steel: 40 mm * Thread cutting: M24 * Spindle taper: MK 4 * Throat: 350 mm * Drilling stroke: 180 mm * Table: 500 x 450 mm * Column diameter: 150 mm * Speed range: 50 - 1450 rpm * Automatic feeds * Thread cutting unit M24 * Coolant system * Machine lamp * Tool ejector * Safety guard Nodpfx Agsyzkbbo Iolh * Table swivel and tiltable * Total power requirement: 1.5 kW * Machine weight approx. 440 kg * In very good condition!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Straight cut, range 105 x 105 mm, round = 120 mm Motor: 1.7 / 2.2 kW Saw blade size: 350 mm Nlodpfx Agsz S U R Rs Ijh Saw blade speed: 1400 / 2800 rpm Pneumatic tensioning.

Condition: good (used), Year of construction: 2010, operating hours: 912 h, functionality: fully functional, Well-maintained and little-used Gabbiani / SCM Galaxy 105 horizontal panel dividing saw. In TOP condition!! Only 912 operating hours. Year of manufacture: 2010 Cutting width: 4,500 mm Fence depth: 4,100 mm Cutting height: 105 mm Saw blade: 380 mm Njdpfoz Evm Sox Ag Ielh The machine can be inspected while running.

Condition: like new (used), Year of construction: 2005, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-530 Nljdpfoy Az H Djx Ag Ioh Technical features Dimensions Table dimensions: 2500 x 2000 mmTable construction: Continuous rotation with a hydraulic breakNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mmY axis traverse: 1500 mmZ axis traverse: 1300 mmVertical capacity (VC): -5 / 1295 Milling head Auto-indexing Orthogonal 90º - Bodies B C (1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 5000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 20000 mm/min Weight and dimensions Machine weight approximate: 39000 kgMaximum weight on table: 13000 kgMachine dimensions approximate: 7980 x 8000 x 3750 mm Accessories Guarding: Peripheral without roofAutomatic tool changer: ATC-60Chip conveyor: 1 rear longitudinalElectronic handwheel: HR-410Coolant: External internal high-pressure coolant through spindleCoolant filter: Paper strip filter Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Condition: Very good – In perfect working order Availability: Immediate Technical description: Cable granulation line including: • Pre-shredder, completely overhauled recently o All rotor bearings are new o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper • Feeding conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: Nledpox It N Uefx Ag Ish • Pre-shredder: 1 set of knives + counter knives • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: • Photos and further information available upon request 📩 Contact us for more information.

Condition: used, - Bongard 8.64 MG Series 4 - External dimensions: W 1440 x D 2700 x H 2600 mm Nlsdpfx Agowr T Ede Ioh - Baking chamber: W 680 x H 1900 mm - Rotating rack: 600 x 800 mm, 19 levels - Baking capacity: Up to 152 baguettes per batch - Rack rotation diameter: 1120 mm - Total baking surface: 9.1 m² - Heating capacity: 70 kW - Connection power: 0.18 kW - Maximum temperature: 280°C - Lifting mechanism: Rack with automatic lifting - Gas burner included for fast and even baking - Opticom electronic controls for precise baking parameter management - Pulsed steam injection, ideal for crispy and golden breads - Ergonomic handles and controls positioned on the right for easy operation - Fresh air intake at burner for optimal performance - Voltage: 400 V / 3-phase - Weight: 1390 kg - Serial number: 930000015837 - Year of manufacture: 2014 Bongard 8.64 Series 4 Rotary Rack Oven – Gas or Oil Fired – Used A Compact Solution for Efficient and Uniform Baking Lrjy Tdewr T Edjxugsr Discover the Bongard 8.64 Series 4 Rotary Rack Oven, an outstanding second-hand solution offering both compactness and high performance. Designed to meet the needs of demanding professionals, this oven is ideal for maximizing production efficiency while optimizing your bakery space. Superior Performance for Even Baking The Bongard Series 4 Oven stands out thanks to advanced technologies that ensure uniform and top-quality baking: - Soft Flow Ventilation: This technology provides gentle, uniform air circulation, perfect for baking delicate goods such as fine pastries and rolls. Thanks to even heat distribution, your creations will remain intact and achieve ideal baking results. - Efficient Steam System: Equipped with structured cast iron gutters, the oven produces high-quality steam to improve the development of your bakery goods. For greater needs, optional ESG steam units can boost steam production capacity, ensuring optimal performance. Durable and Practical Design The Bongard 8.64 Series 4 Oven is built to withstand the rigors of intensive production environments while providing excellent user comfort: - Robustness and Longevity: Fitted with a high-performance refractory stainless steel heat exchanger and a reinforced base, this oven is engineered for outstanding durability. Electric elements are rigorously selected for maximum service life. - Simplified Maintenance: The seamless stainless steel baking chamber facilitates cleaning. Features such as the raised-edged floor and retractable steam units minimize residue accumulation. The listing was translated automatically. Translation errors are possible.

Condition: used, Year of construction: 2012, HOMAG BMG 311 Venture 316 XXL, manufactured in 2012. 5-axis CNC machining center with a cantilever table for large wood and wood-based material parts. Equipment: - Workpiece length in a single field up to 6,000 mm with all aggregates - Workpiece width up to 950 mm at the front / 1,400 mm at the rear with all aggregates - Z-axis travel 450 mm - Drive5C main spindle, 10 kW S6, HSK-F63, 1,000–24,000 rpm - 14-position tool changer - Drilling head: 12 vertical and 4 horizontal spindles, as well as a nut saw - 10 consoles, each with a length of 1,340 mm - 2 vacuum pumps with 90 m³/h each at 50 Hz - LED position indicator and chip conveyor - powerControl / woodWOP 6.1 Photographed meter readings (December 2025): Main usage: 4,001.96 h Secondary usage: 1,864.35 h Total usage: 8,788.53 h No guarantee regarding the current operating hours. Photos of the woodWOP version and hour meters are attached. Planned dismantling and handover after the arrival of the new machine in week 05/2027; exact dismantling and collection date to be agreed upon. Work areas depend on the tools and clamping devices. Price on request, free on board (FOB) truck. Detailed scope of delivery, inspection and transport by arrangement. Subject to errors and prior sale. Nlodpo Afclzjfx Ag Ish DS-Maschinen – Owner David Schulz Machine location: Bavaria, Germany. Inspection by appointment only through DS-Maschinen.

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, manufactured in 2006. It underwent a major overhaul in 2024. New switchgear control cabinet, new knife sets. Wagner pre-shredder, type WS 15, manufactured in 2007, 15 kW. Feed conveyor, extraction system, and magnetic vibrating table, manufactured in 2021. Output: approximately 150 - 180 kg/hour, depending on the material. Location: Switzerland, 8260 Stein am Rhein. Asking price: EUR 59,000 (negotiable) Nodey D Ug Tjpfx Ag Islh If you have any questions or require further information, please feel free to send us a message or call us.