Used Meinert Manual Setting Device / Setting Apparatus for sale (28,926)

Condition: used, Year of construction: 1972, Hand clamps / clamping devices for band saw blades Meinert PH6D Ledpszl N N Aofx Aftjad immediately available – fully functional Location: Austria, near St. Pölten

Condition: good (used), Offer 25475 Manual double unwind/rewind reel Technical data: - Coil weight, left + right, up to approx. 1 t - Coil width, each side, up to approx. 300 mm - Coil inner diameter, approx. 380 to 500 mm - Coil outer diameter, up to approx. 1250 mm - Arbor height, approx. 750 mm Ledpfx Afjzkhbnotead - Space requirement, approx. W 1250 x D 900 x H 1300 mm - Weight, approx. 200 kg

Condition: good (used), Year of construction: 2008, Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device Ljdpfxoipapio Aftoad -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Lasdpfjx A Ia Iox Afted

Condition: excellent (used), Stäubli robot RX 60B LCR with control unit and handheld device Lasdszdytvopfx Aftsd Here we offer a Stäubli robot RX 60B with control unit. Robot: Stäubli robot RX 60B LCR Lifting capacity (nominal load - kg): 2.5 kg Weight: 46 kg Type: RX60B LCR / F04/50R7E1/A/01 Control unit: Stäubli CS8 RX60B LCR 3X400V - 50/60 Hz - 3000VA Weight: 170 kg Type: CS8 RX60BLCR / F06/546XA1/C/01 Handheld device: Stäubli SP1 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut Ledpezczvdefx Aftoad - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Condition: new, -Dimensions (A x B x C): 1610 x 1272 x 1392 mm -Max. dough piece weight: 700 g -Number of compartments: 31 -Part No.: 7309535 -Ball capacity per compartment: 8 -Total ball capacity: 248 -Power: 0.37 kW -Voltage: 400 V -Frequency: 50 Hz - 1.06 A -Weight: 380 kg The RP manual intermediate prover is a resting chamber for dough, loaded and unloaded manually, which allows the dough to relax for the necessary time after dividing and before final shaping. During resting time in the RP manual chamber, the dough balls ferment gently and gain some volume, which enables them to become more supple and easier to shape. This chamber is specially designed for artisan bakers who want to optimally preserve their dough’s quality. Standard baskets can hold pieces up to 650 g. Optional germicidal treatment available for enhanced hygiene. DURABILITY: -Painted steel frame provides great rigidity to the chamber. An oversized chain is used for the 'large wheel' of the proving nests to extend the service life of the chamber. -Smooth gear operation ensures extremely quiet machine performance. VERSATILITY: -Equipped with electrical sockets for a moulder and divider, allowing for integrated workflows. -Manual left/right control button available, with a highly ergonomic hands-free control option. HYGIENE: -Proving nests made from polyester to prevent moisture buildup. Iedcvyqoxv R Rcsi Aobd -Optional integration of a germicidal lamp. The listing was translated automatically. Translation errors are possible. Lasdpfxexv R Rcj Aftod

Condition: excellent (used), Wire Straightening Devices for Wire and Rods Most units are from the manufacturer Witels Albert, but there are also other brands available. The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. All devices have been inspected and are clean. Lodpfx Afey Eyzfjtead I am selling these at approximately 50 – 60% of the original price.

Condition: used, Tool presetting machine GILDEMEISTER-DE VLIEG, type EGS 5045 / Microset DPS 100 Serial No. 83-10-102, Year of manufacture 2002 Travel X-axis: approx. 400 mm Ljdpjhbal Dsfx Aftsad Travel Z-axis: approx. 400 mm Tool holder in the mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table: Ø 340 mm Internal taper in the mounted rotary table: Ø 245 mm Tool holder plate as a rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Rotatably mounted flange with centering diameter: Ø 102 mm Rotatably mounted flange with outer diameter: Ø 155 mm Rotatably mounted flange with 3x M10 mounting holes, pitch circle: Ø 130 mm Mains connection: 230 volts, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circle ground glass screens - Ground glass screen fixed with crosshair - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Footprint L x W x H: 1100 x 1000 x 800 mm Weight: 400 kg Good condition

Condition: excellent (used), Tool setting device (24310) Ljdpfx Aohc I Uvoftsad For SK 50

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro. Laodpfx Aod Nnb Rsftsd

Condition: used, Straightening machine, strip straightener with adjustable geared motor LENZE Straightening machine, strip tensioner used for cardboard approx. 350 x 1.5 mm Not suitable for use as a conventional straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, infinitely variable Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 Laededzp U Aepfx Afted Motor power: 0.37 kW Mains connection: 380 volts, 50 Hz - Traction roller pair, drive of the lower rubberized roller via open gear drive - Speed control via infinitely variable speed adjustment using a handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit are not driven) - On a stable metal base - Straightening machine used for cardboard approx. 350 x 1.5 mm Space requirement L x W x H: 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: excellent (used), 2 units available: Lsdpfx Ash If Rveftsad Roller - 50 In very good condition.

Condition: new, Manual mini punch grinding device for cutting punches, ejector pins, sleeves, and other rod-shaped parts. Suitable for grinding round profiles on surface or tool grinding machines. For workpieces up to max. Ø 10 mm and lengths up to max. 300 mm. Roundness accuracy 5 µm. Weight 3.5 kg. Ljdpfsymyqbox Aftsad

Condition: new, The solid cast construction ensures a long service life of the machine, as well as maximum setting accuracy. With a lever movement, two teeth (right, left) or three teeth (right, left, straight) are set simultaneously and the saw blade is moved forward. Technical data: Saw blade width 15-100 mm Setting width up to 1 mm Lasdpfx Asvrvhpoftod Tooth pitch 8-30 mm Tooth height 5-16 mm Saw blade thickness up to 1.3 mm Weight 35 kg Option: Base frame

Condition: new, Year of construction: 2025, for saw blades Width: 38 to 170 mm Ljdpexz E Uaefx Aftsad Length: 4,000 - 8,000 mm Also suitable for detecting bent teeth.

Condition: used, Tool presetting machine SOMET, type SPS 500 U Machine no. S1, Year of manufacture 1987 Table surface 545 x 1000 mm Travel ranges X = 500 mm, Y = 340 mm Width in the portal 550 mm Lasdpedzqrtofx Aftsd Height table - lower edge of portal 250 mm - Longitudinal guide on the portal, right and left of the table - Adjustment via very fine lead screws with handwheel - Quick adjustment via electrical release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 units of clamping devices for tool measurement - mounted on a base with storage compartment and drawer Space required L x W x H: 1100 x 700 x 1650 Weight 560 kg In good condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, number of clamping sleeves: 5, The UNO smart presetting device is a compact and user-friendly solution for the precise measurement and presetting of tools directly in the production environment. Thanks to its small footprint and simple manual operation, the device is ideal for toolmaking, machining operations, and single-piece and series production, where high measurement accuracy and efficient workflows are required. Equipped with the highly precise Microvision SMART image processing system and a manual precision spindle with an SK50 tool holder, the UNO smart enables exact tool measurement with a repeatability of ± 5 µm. The robust gray cast iron construction, combined with a thermally optimized material selection, ensures high stability and reliable measurement results, even with fluctuating ambient temperatures. Laedpfxozl Sy Rs Aftjd In addition, the device has a memory for up to 99 zero points and an integrated energy-saving mode. The included reducer rings allow the presetting device to be used flexibly for other tool holders, such as SK30, SK40, BT30, BT40, or HSK63, thus offering versatile applications in various production environments. With its compact design, high measurement accuracy, and excellent price-performance ratio, the UNO smart represents an economical and reliable solution for precise tool presetting. With our comprehensive all-inclusive package, we can take over the complete service upon request – from the professional delivery and installation to the alignment and commissioning of the presetting device. Finally, our service technicians carry out all the necessary functional tests and ensure that the UNO smart operates reliably and precisely.

Condition: good (used), Year of construction: 1998, Tool setting device, tool presetting device, milling cutter setting device -Z-axis: 630 mm -unit of analysis -360 degree protractor Lsdpfjpam Avox Aftjad -Dimensions: 570/1720/H1875 mm -Weight: 387 kg

Condition: good (used), collet chuck, tool holder, tool holder, milling chuck, milling tool, cutter head holder, milling mandrel, power chuck tool setting device, power chuck tool presetting device -Manufacturer: Oertlieb Gühring, power chuck for tool presetting device 2 pieces -Type: Ortlieb K5 / Gühring TGZ 38 GM300 -Individual components/dimensions: see photos -Price/Delivery: complete -Transport dimensions: 265/132/H175 mm Laodpfsvm S Ibjx Aftod -Total weight: 9.1 kg

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device Lodpfx Aepix Nkoftead -Milling tool holders: Adapter for tool presetting device, 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Submission/Price: complete -Overall dimensions: 500/300/H170 mm -Weight: 34.4 kg

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system Lasdsxn Awxjpfx Afted • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Ledpfxjxn Ax Aj Aftsad

Year of construction: 1989, condition: good (used), Storage location: 2649 Manufacturer: Somet Type: SDJ 300 Lsdsiim Szspfx Aftead Year of manufacture: 1989 Machine number: K017 200 Measurable tool diameter: Ø 6 - 300 mm Measurable tool length: 40 - 500 mm Accuracy: 0.002 mm Accessories: 1x interchangeable collet ISO 40 1x interchangeable collet ISO 45 1x interchangeable collet ISO 50 1x test mandrel ISO 50 Dimensions: 1,000 x 600 x 1,850 mm Weight: approx. 0.3 t

Condition: used, machine/vehicle number: 005642, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3 Ljdpswuciwsfx Aftsad