Used Mb Pro 3 Com 1000 for sale (74,397)

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min Kdodpexaafqjfx Akxsk spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam Kjdpfx Asxabm Njkxjdk - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, load capacity: 1,000 kg, Equipment: foot remote control, 1000 kg load capacity complete set incl. hand and double foot remote control (available from 600 kg to 10,000 kg) 3-axis weld positioner with adjustable height with through bore 200 mm table plate diameter 900 mm with T-slots, alternatively with screwed-on solid perforated plate 2000 x 1000 x 200 mm, thickness 20 mm, hole grid 100 mm, diameter 28 mm height (horizontal) min. 0.65 m, max. 1.25 m height (tilted) min. 0.45 m, max. 0.95 m speed from 0.01 - 1.1 rpm Kdsdpfex Th A Hox Akxok tilt up to 135° hand and double foot remote control with speed display very robust price without accessories, accessories available at very competitive surcharge table plate surcharge €1,900 (only in combination with positioner)

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 1,000 kg, 1000 kg load capacity complete set including hand and double foot remote control 3-axis welding rotary table, height adjustable with through hole 200mm Plate diameter 900mm with T-slots alternatively with screwed on solid perforated plate 2000 x 1000 x 200mm, thickness 20mm, hole pattern 100mm, diameter 28mm Height horizontal min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Kdedpfx Akovllhroxek Speed from 0.01 - 1.1 rpm Inclination up to 135° Hand and double foot remote control with speed display very robust Price is without accessories, accessories with very reasonable surcharge Table top surcharge €1900 (only in conjunction with positioner)

Condition: new, Year of construction: 2024, 1000 kg load capacity complete set incl. hand and double foot remote control Height-adjustable welding turntable with through hole 200mm Kdedpfx Aer Tr A Ujkxjk Plate diameter 900mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.1 rpm Tilt up to 135° Hand and double foot remote control with speed display Very robust Chucks available at extra cost depending on model and size

Condition: new, 3D grid table 2000 x 1000 x 200 mm, 100 mm pitch, plate thickness 22 mm, hole diameter 28 mm. Machined flat, very robust, weight approx. 750 kg. Supplied with table leg suitable for all standard accessories with 28 mm. Price is without accessories. Additional charge of €500 for a set with half the pictured quantity. Kdsdpfovlli Ajx Akxjk

Condition: new, Year of construction: 2021, Mesh shelf/support shelves for pallet racking Data: - 3-part, galvanized, for 270 x 110 cm shelf ( 99 € net ) - 4-part, galvanized, for 360 x 110 cm shelf ( 132 € net ) - New from stock - Load capacity: 1000 kg per grid, with evenly distributed load -MULTIPLE AVAILABLE! Kdodpfxoy D S I Us Akxjk Price: 99,00 € net + legally valid VAT. You will receive an invoice with VAT shown. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning and ordering to installation. Delivery is available on request at a reasonable price.

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) Kjdpfxoxyhnye Akxedk - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, pivoting range: 135 °, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Kodpfx Ajxt Tgnjkxodk Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible) Kedsx Th Sujpfx Akxjdk

Condition: used, This listing is for the Minebea Intec Combics 3 Scales The unit is in full working condition and is ready for immediate use Key Features of Combics 3 Display & Interface High-contrast graphic display, backlit for good visibility. Softkey-supported application packages and menus. Integrated traffic light indicators (red/yellow/green) for control applications. Functionality & Applications Combics 3 provides extensive weighing functions, including: Classification and sorting by weight Counting Fill-quantity control and dosing Formulation and statistical processes With the appropriate software, it also supports percentage weighing, gross/net/tare processes, and other advanced weighing operations. Connectivity & Interfaces Multiple data interfaces such as RS232, RS485/422, analogue 4-20 mA, Profibus DP, and Ethernet TCP/IP for integration into production systems. Kjdpfx Aoymdpuskxsdk Robustness & Construction Designed for industrial environments with stainless-steel housing and high protection ratings (e.g., IP44 up to IP69K depending on configuration). Typical Use Cases The Combics 3 indicator is suitable for industries like food, pharmaceutical, chemical, metal, and electrical manufacturing — anywhere precise and configurable weighing with advanced control and reporting is needed. How It Fits Into Combics Scales Combics scales are modular systems: a weighing platform (bench or floor) is paired with an indicator like Combics 3 to form a complete weighing solution. The platform’s range can span from small 3 kg units up to heavy 3 t systems. If you want, I can also explain the differences between Combics 1, Combics 2, and Combics 3 indicators in more detail.

Condition: new, Year of construction: 2024, Welding rotary table Protec KT 10 000 HV Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Kodpfx Aksk S D N Eoxjdk Dimensions: height tilted min: 1080mm height tilted max: 2200mm height horizontal min: 1400mm diameter of the clamping disk 2000mm length 3250mm, width 1780mm speed from 0,05 to approx. 0,6 rpm.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Rational iCombi Pro LM100GE AXXXX combi oven from 2021, in excellent condition. The iCombi Pro is Rational’s flagship model, designed for high-performance steam, convection, and combination cooking with intelligent programming and precise controls. Technical specifications: • Model: LM100GE AXXXX • Power: 63.7 A • Voltage: 3NAC 400V • Frequency: 50/60 Hz • Water pressure: 150–600 kPa • Protection class: IPx5 • Serial No: L2252J1I223320086 • Connectivity: LM1 • Made in Germany • Year: 2021 Kjdex Ad U Ujpfx Akxedk Features: • Multi-functional combi cooking (steam, convection, combination mode) • Precise temperature and humidity control • Intelligent cooking programs • Hygienic stainless steel construction • Touch control interface • Easy cleaning system • High energy efficiency Condition: • Excellent overall condition • Fully functional • Very clean inside and out Machine located in Best, Netherlands.

Year of construction: 2005, condition: good (used), All parts shown by hand not come. Kjdod N I Ezjpfx Akxedk VAT not included in price.

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 FOR HELICAP 23 PRO: YOM 2019 VERSION 400v 9.000 RUNNING HOURS Kdedpfx Aoyynd Rskxsk NEW CONDITION THE MACHINE IS IN PRODUCTION TILL MAY 15TH.

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 5,000 kg, Column lift turning device 5000 kg, 3000, 1000 load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Load capacity 5000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Speed 0.5 rpm Vertical adjustment 500 mm Clamping plate diameter 1000 mm Kdsdpfjuk Niyox Akxjk Rotation 2.2 kW Lifting motor 2 x 2.2 kW Various column lifting and turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-axis rotary and turning positioner 500, 1000, 2000, 3000 kg load capacity, clamping disk diameter 0.5 0.65, 0.8 1.0 meter have proven themselves in the field of construction and agricultural machinery, commercial vehicles, industrial trucks as well as in the aviation and energy technology sectors. For welding, assembly, machining, etc. With their stable and robust design, flexible positioning over three axes, even overhead, and easy operation, they make welding easier. easy to operate, they facilitate the welding, assembly and handling of large workpieces. workpieces. Faster production, increased productivity Optimum positioning of the workpiece improves the welding quality and enables a higher deposition rate Kdsdpfoulaxbox Akxek Improved safety, dangerous crane handling is greatly reduced Simultaneous positioning of up to three axes without time-consuming reclamping Simple operation and ergonomics during processing protect and relieve the operator Flexibility thanks to modular adaptability and customer-specific special designs possible The basic principle: By positioning the support arm rotary axis above the clamping plate, the support arm acts as a counterweight to the workpiece. counterweight to the workpiece. The machines are therefore considerably more powerful than turn-tilt tables or turn-tilt positioners. This principle makes it possible to handle the specified specified loads in any position. Due to the endless rotation of the 2 axes and the additional height adjustment, all workpiece positions (even overhead) are possible. possible. Speed of turntable infinitely variable 0.1 to 1.0 rpm, from 2000 kg load capacity 0.05 to 0.6 rpm. with radio remote control Rotation range 360° endless Swivel range 360° endless Stroke: 1000 - 1500mm, from 2 tons load capacity 1250 - 2000mm Arm radius up to 1000 kg 1 meter, from 2000 kg 1.5 meters

Condition: used, functionality: fully functional, Year of construction: 2022, Item no.: 1000003766 Kjdpfx Ajm Twvdokxjdk Used conveyor belt driven - 1.520 mm Technical data: Manufacturer: MB Conveyors Year of construction: 2022 Overall dimensions: 1.520 x 540 x 320 mm (LxWxH) Conveyor length: 1.400 mm Conveyor width: 400 mm Cheek height: 110 mm belt type: PVC, smooth Gear motor: included - gear construction NORD 50 Hz - 230/400V - 0,18 kW Conveying speed: constant 0,1 m/s Condition: used / fully functional Function test: Ok OPTIONAL: Supports (height freely selectable), Electrical connection (ON/OFF) EMERGENCY STOP button Frequency converter

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance Z-axis: 500 mm, Rondcom 54-SD3 / ACCTEE PRO Form tester on a steel device base, including an air-bearing, high-precision CNC rotary table and motorized Z-column (Z=500mm), consisting of: Measuring unit E-RT-R531A Detector holder E-DT-R749A Stylus arm EM46000-S302 (diameter 1.6mm) Detector E-DT-R120A Interface controller PCB for PC operation ACCTee PRO roundness base software under MS WIN XP/7 Calibration sphere E-MG-R01A (roundness 0.05 μm) Tool set/gauge block set with factory certificate (1.47mm and 1.49mm) Fuse (1A), user manual, device inspection certificate CNC probe holder with offset height H=153 mm; offset depth T=65 mm; suitable for R44/54 SD/DX with detector E-DT-R120A Accretech description: E-DH-R770B Z220 HP Workstation G1 - HP Single Unit (CMT) Packaging - HP Z220 CMT 400W 90% Efficient Chassis - Windows 7 Prof. 32/64bit OS - Intel Core i3-2120 3.3 3M 2C GT1 CPU - 4GB DDR3-1600 ECC (2x2GB) RAM - 500GB 7200 RPM SATA 6G 2nd HDD - ATI V4800, 1 GB RAM - Network connectivity - 16X SuperMulti DVDRW SATA 1st ODD 29-piece Stylus Set for Rondcom Three-jaw chuck E-WJ-R01C Kjdpfx Aksx Sckpsxodk FX Base Frame Comfort Version Rondcom 44/54 Table dimensions 1076x1076x810mm consisting of: Closed base frame with 4 mounting points for air springs, Steel substructure, RAL 7035 color Integrated granite plate 1000x630x100mm All wooden elements melamine resin-coated, graphite black 3x side and rear cover plates 1x large wooden shelf with square cutout + 1x insert shelf Intermediate floor wood 2x front doors wood + additional adapter plates for higher load-carrying capacity due to heavy Z-column 1x monitor holder with column and folding arm Integrated air spring system 4x BiAir 0.25-ED-LT membrane air springs (vertical natural frequency approx. 2.5Hz) Load capacity at 6 bar: 170 kg 4x GDR 0.25-LT 1x mechanical-pneumatic level control MPN-LCV, reset accuracy ±0.1 mm 1x compressed air maintenance unit WFD-M 4x leveling elements BNRS 70/4 (leveling range 750mm +/-30mm possible) 4x M16 x 100 mm leveling screws 1x complete assembly of wooden cladding elements

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table Kdodohlp D Njpfx Akxok - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Year of construction: 2026, condition: new, functionality: fully functional, SPECIAL PRICE + LIMITED QUANTITY iCOMBI PRO 10x 1/1E NEW IN ORIGINAL PACKAGING + 1 YEAR MANUFACTURER WARRANTY + 2 YEARS IF INSTALLED BY RATIONAL SERVICE PARTNER The iCombi Pro is the latest combi-steamer from RATIONAL. The iCombi Pro 10.1/1 Electric model with 10 GN 1/1 shelves is easy to operate, even for untrained staff, delivering outstanding food quality without the need for constant supervision. The ultra-fast interim and self-cleaning features keep your unit spotless. You will receive an invoice with VAT shown separately. In-stock and available immediately!!! OUR EQUIPMENT SERVICE FOR YOU: - Up to 2 years manufacturer’s warranty - High-quality branded equipment at fair prices - Professional and knowledgeable advice – before and after purchase - Free shipping within Germany (excluding islands/mountain stations) - Provision of operating manuals, connection diagrams & spare parts - Trade-in of your combi-steamer from year of manufacture 2011 onwards - Complete accessory program at attractive prices Condition: New, fully functional, year of manufacture 2026 TECHNICAL DATA: Kedpfx Akjwwiu Eoxsdk W x D x H: 850 x 842 x 1014 mm Power supply: V: 400 / Hz: 50-60 / kW: 18.9 Weight: 127 kg FEATURES: - Energy efficient: Up to 60% less energy consumption thanks to state-of-the-art thermal insulation - Self-cleaning; the unit cleans itself via an integrated program - Operation possible without additional water softening system and without extra descaling ADDITIONAL INFORMATION: - Temperature range: 30°C to 300°C - Detects current cooking chamber conditions - Recognizes food size, load quantity and product state to calculate browning - Learns frequently used cooking routines and implements them - Determines the ideal cooking process for your desired result - MyDisplay – user-specific, customizable control display - TFT color display and touchscreen - Operating and user manuals accessible on the device display - Core temperature probe with automatic error correction and positioning aid - Door compartment glazed, energy-saving - LED interior lighting - Including energy consumption display - Humidity control: precise, percentage humidity measurement and adjustment - Individual programming of at least 350 cooking programs with up to 12 steps - Steam injection adjustable in 3 stages - USB interface - High-performance fresh steam generator with automatic descaling - 5 programmable air speeds - Integrated, maintenance-free grease separation system without additional grease filter - Cool-down function: rapid cooking chamber cooling - Automatic adaptation to installation location (altitude, climate, etc.) - Appliance door with ventilated triple glazed panel and swiveling inner pane - Wastewater fixed connection permitted as per SVGW - Splash and jet water protection IP X 5 - Separate solenoid valves for soft and warm water up to +30°C - Automatic start time pre-selection with adjustable date and time - Interior and exterior made from stainless steel DIN 1.4301 - Integrated WiFi module SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations by prior agreement only Do you have questions, need advice, or wish to view the unit in person? You can reach us during our business hours: Monday–Friday, 09:00–13:00 and 14:00–17:00. Sales are made exclusively according to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2004, clamping force: 1,000 kN, Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE without hopper Ksdpfx Akevt Rwuoxedk

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Ksdpjy D Sbnefx Akxodk Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 17,000 kg, operation weight: 17,000 kg, Year of construction: 2009, operating hours: 6,330 h, Keestrack Combo/3 Fraction/Screen/Various Screen Decks/Radio Remote Control • Manufacturer: Keestrack • Model: Combo 2712 T • Year of manufacture: 2009 • Operating hours: 6,330 h • Screen box: L: 2.70 m x W: 1.20 m • Fine material belt under screen box: L: 3 m x W: 80 cm • Oversize material conveyor: L: 4.50 m x W: 1 m • Left side conveyor (fine fraction): L: 8 m x W: 65 cm • Right side conveyor (medium fraction): L: 8 m x W: 65 cm • Crawler chassis: L: 3.55 m x W: 40 cm • Radio remote control • Engine: Deutz 4 cylinder diesel engine • Gross weight: 17,000 kg • German machine • Immediately operational Kdedpfx Aksyyyq Njxjk • This offer is non-binding and subject to prior sale. - Interim sale reserved, - Errors and/or typographical mistakes excepted. - Sale according to our terms and conditions.

Condition: good (used), mileage: 233,390 km, fuel type: diesel, Year of construction: 2007, Citroen Berlingo 1.6 HDI Panel Van Combo 2007 APK 3-2027 Nice van in trade-in condition. Mileage: 233,390 Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. holds a changing stock of machines, trucks, trailers and attachments. Kjdpjyz Abmjfx Akxsdk All our deliveries are at trade prices and under AS-IS conditions without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland