Used Maxitrol Gf65 Mf-Dn65 for sale (1,058)

Condition: used, Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg Kjdped D Iq Dsfx Ahbodu

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Kodjwym Nfspfx Ahbjdu Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Medium-frequency spot welding machine – also suitable for welding aluminium. Rated power at 20% duty cycle: 180 kVA Max. welding power: 315 kVA Adjustable reach: 300 to 800 mm Arm spacing (min/max): 150–400 mm Kedpjzz Ripjfx Ahbedu Electrode stroke: parallel stroke Electrode force adjustable up to 600 daN Weight: approx. 660 kg Welding control unit: Dalex L 4-6 Cooling water flow rate: 10 l/min Operating instructions and manual are available Working stroke triggered by pneumatic foot pedal Very good, well-maintained condition

Condition: good (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 5,100 rpm, spindle speed (min.): 10 rpm, table width: 230 mm, table length: 1,245 mm, type of input current: three-phase, overall weight: 950 kg, input voltage: 380 V, Used turret milling machine Kdjdpsz Ducvefx Ahbsu Brand: Optimum Model: OPTIMILL MF 2V Year: 2018 Weight: 950 kg Swiveling head with Siemens variable speed drive. 3-axis dimension display. Type: Turret milling machine with swiveling head ±90° (left/right) and tilting ±45°. Spindle taper: ISO 40 (DIN 2080 / DIN 69871) Speeds: Continuous electronic variable speed drive (typically 10 to 5,100 RPM). Table surface: 1,245 x 230 mm Travel (X / Y / Z): 800 mm / 305 mm / 406 mm Motor power: 3.7 kW (Three-phase 380V) Automatic quill feeds: 3 Automatic motorization in X and Y axes with variable speed control and rapid traverse mode. Machine complies with CE regulations.

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, Exeron S 310 MF Year of manufacture: 2011 Generator hours: 26882 Control system: Exowin 20 X, Y, Z travel: 310 x 270 x 270 mm C-axis 3R tool holder in the spindle Erowa chuck on the machine table with magnetic plate Generator: 64 A C-box for carbide and PKD tools 20-position tool changer Kdsdpfxjzguk Uo Ahbju Fire extinguishing system Chiller Aluminum clamping plate, Erowa Documentation Machine is connected and available for inspection.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 Kjdpfxsywnr Ne Ahbodu DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, Quaser MF 500 C Quaser MF 500 C machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! Kdsdpfjzditysx Ahbju Technical data: Year of manufacture: 2016 Working area and travels: X-axis (longitudinal): 550 mm Y-axis (transverse): 800 mm Z-axis (vertical): 610 mm A-axis (swiveling range): +30° to -120° C-axis (rotational axis): 360° (continuous) Table diameter / clamping surface: Ø 410 mm Maximum workpiece size: Ø 500 mm × H 300 mm Maximum table load: 200 kg Spindle taper: BT 40 Speed: 12,000 rpm Drive power: 15 kW Tool positions: 30 Number of simultaneous axes: 5 Rapid traverse: 36 m/min Weight: 7750 kg About the machine: Offered is a Quaser MF 500 C machining center with a Siemens 828 D control. This machining center is in very good original condition. It comes from a company where it was only used to a limited extent for prototype manufacturing. Key features: The Quaser MF 500 C is a powerful, vertical 5-axis simultaneous machining center from the Taiwanese manufacturer Quaser. It is designed for the highly precise complete machining of complex workpieces in the aerospace, mold making, and general precision engineering industries. Stable construction: The machine is built to be massive and heavy, ensuring maximum stiffness and vibration damping, even during heavy machining. Tilting table: The swiveling round table enables full 5-axis machining. With support devices (counter bearings), workpieces weighing up to 500 kg can often be clamped. The Quaser MF 500 C has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MF 500 C on site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,000 mm, overall weight: 20,000 kg, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 380 mm, drill diameter: 40 mm, rotational speed (max.): 4,200 rpm, table length: 1,000 mm, table width: 800 mm, table load: 9,500 kg, number of spindles: 2, feed length W-axis: 500 mm, Equipment: rotational speed infinitely variable, IMSA DEEP HOLE DRILLING MACHINE, MODEL MF 1000 BB Kdsdpfoyft Haex Ahbou TRAVEL: LONGITUDINAL AXIS 1250 TRANSVERSE AXIS (MILLING SPINDLE) 380 mm TRANSVERSE TRAVEL OF THE HEAD 500 mm VERTICAL TRAVEL 1000 mm ROTARY TABLE DIMENSIONS 1000x800 TOTAL MACHINE WEIGHT 20,000 KG MAXIMUM WEIGHT OF ROTATING WORKPIECE 4000 KG MAXIMUM WEIGHT OF STATIONARY WORKPIECE 9000 KG TILTING ROTARY TABLE TOOL CHANGER, 20 POSITIONS MAXIMUM DRILLING DEPTH 1000 mm MAXIMUM DIAMETER OF DEEP HOLE DRILLING 40 mm MAXIMUM SPINDLE SPEED FOR DRILLING 4200 RPM MILLING SPINDLE DIMENSION ISO 40 MAXIMUM SPINDLE SPEED FOR DRILLING 4000 RPM MAXIMUM FEED RATE WITH MILLING SPINDLE M 40 MAXIMUM MILLING CUTTER DIAMETER 65 mm SPINDLE TRAVEL 380 mm

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Kdedpfx Ahoxyk Ucobsu

Condition: used, Year of construction: 2014, - Manufacturer: Cefa/Sorbini Kdjdpfoz Ehq Nex Ahbou - Model: SMARTCOATER MF-EVO - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 880 mm - 940 mm - Workpiece height: 3 - 80 mm - Operating side: right - Coating roller: rubber hardness ~ 50 - 60 Shore - Coating quantity: ~ 4-50g/m2 - Coating roller diameter: 250 mm - Metering roller diameter: 173 mm - Metering roller with switchable reverse operation - Double diaphragm pump: 1 piece - Transport system with conveyor belt - Compressed air connection: 6 bar - Machine is mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Control cabinet is mounted on the rear of the machine - Voltage, frequency: 400 / 50 - Voltage fluctuations max. +/- 5 %

Condition: excellent (used), Year of construction: 2014, feed length X-axis: 300 mm, feed length Y-axis: 300 mm, feed length Z-axis: 500 mm, General Aspects MAIN MOVEMENTS Maximum drilling depth - Z-axis: 500 mm Table, longitudinal movement - X-axis: 300 mm Table, vertical movement - Y-axis: 300 mm Drilling slide, piece support - W-axis: 50 mm DRILLING SPINDLE Drilling diameter without pre-drill, optimal: 3 – 12 mm Kdodpfju Au Duox Ahbsu Distance between the bits: 250 mm Drilling spindle, rotation speed min - max: 0 - 6.000 rpm Drilling spindle motor power: 7.5 kW (S1) Cannon drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Cannon drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING TABLE Fixed clamping table, surface dimensions: 500 x 600 mm Maximum load capacity of the fixed table: 1.000 kg Standard type clamping slots: 18 mm OIL Cutting oil flow rate: 50 lt./min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 lt Adjustable temperature: 27°-30°C DIMENSIONS AND WEIGHTS Width x length: 4.450 x 3.000 mm Approximate weight: 2.210 Kg POWER SUPPLY Electrical power supply: 400 V/3-phase/50-60 Hz Compressed air: 6 bar Total installed power: 25 kW

Condition: used, Year of construction: 1978, operating hours: 9,125 h, 1978 | Hanomag MF 33C Massey Ferguson / for parts only | Used Wheel Loader | 9125 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Kdedpfxey Iy N Us Ahbou 5 inspection points 5 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Only for parts recovery, not complete. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40580 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2003, functionality: fully functional, HORIZONTAL MACHINING CENTER "FAMUP" MOD. MF 650 CNC FANUC SPINDLE HSK 63 15,000 RPM TRAVELS MM 700X660X550 PALLET MM 500X500 Ksdpexwccmsfx Ahbjdu FULL ROTARY TABLE ATC 50 POSITIONS HIGH-PRESSURE COOLANT CHIP CONVEYOR YEAR 2003

Condition: excellent (used), Year of construction: 1998, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Year 1998 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Kjdoynvwyjpfx Ahbodu Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 2001, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Year 2001 Kdjdpfewink Njx Ahbou Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Condition: used, Year of construction: 2004, Format: 0x0 Kdsdpfjx N I Ubex Ahbou Equipment: Semi-automatic and automatic foil packaging machines Minipack Sealbag sealing machine For packaging printed materials such as magazines, booklets, and other printed materials Easy to operate and adjus

Condition: used, Year of construction: 1999, Technical details: turning diameter: 200 mm turning length: 600 mm capacity X-axis: 190 mm capacity Z-axis: 555 mm double spindle units: spindle distance: 800 mm Kdjdpez A Andefx Ahbou spindle drive: Links (40/100%ED): 18/14 kW spindle turning speed range: 31-6300 U/min spindle drive: Rechts (40/100%ED): 18/14 kW spindle turning speed range: 31-6300 U/min speeds of tool: 2x12 Werkzeuge: 7/5 KW, 40-4200 U/min dimensions of the machine ca.: 5,032 x 3,048 x 2,445 m weight of the machine ca.: 6500 Kg Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Year of construction: 2020, condition: ready for operation (used), A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible. Kdjdpfxozfp Hzs Ahbeu

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: Kdedpfxezxhmas Ahbou - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Year of construction: 2008, condition: used, functionality: fully functional, FREWITT MF-LAB – PHARMACEUTICAL LABORATORY MILL / GRANULATOR For sale: FREWITT MF-LAB laboratory mill / oscillating sieve mill, used in pharmaceutical applications, in excellent used condition. The machine is supplied with an extensive package of 13 original sieve inserts in different sizes, as well as comprehensive original documentation and qualification documentation. TECHNICAL DATA Manufacturer: FREWITT SA, Switzerland Model: MF-LAB Year: 2008 Serial No.: 6180310817 Electrical supply: 400 V / 50 Hz Current: 16 A Design: ATEX APPLICATION The MF-LAB is designed for laboratory and pharmaceutical applications and can be used for gentle size reduction, calibration, and sieving of dry or moist products. Particularly suitable for: Kedpfxszxdgis Ahbjdu - Pharmaceutical R&D - Laboratory and pilot applications - Granule calibration - De-agglomeration - Sizing and sieving - Heat-sensitive products EXTENSIVE SIEVE PACKAGE A major advantage of this machine is the large number of included sieve inserts. Included are 13 marked sieve inserts in 9 different designs/sizes. All sieves shown in the photographs are included in the scope of supply. DOCUMENTATION Comprehensive original documentation and qualification documentation are available with the machine. CONDITION Excellent, very clean used condition from pharmaceutical use. Inspection and demonstration can be arranged by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged upon request. CYCRON GmbH Switzerland Invoice will be issued by CYCRON GmbH. Subject to prior sale and errors.

Condition: used, Year of construction: 2011, Technical details: weight of the machine ca.: 11 t Kedpfx Asyz Sdqehbodu Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: good (used), Year of construction: 2011, operating hours: 46,500 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 3,600 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, nominal power (apparent): 130 kVA, controller manufacturer: Siemens, controller model: 840SE, workpiece length (max.): 3,600 mm, workpiece width (max.): 1,100 mm, workpiece diameter (max.): 1,100 mm, workpiece weight (max.): 5,000 kg, total height: 3,042 mm, total length: 9,280 mm, total width: 4,608 mm, table width: 1,100 mm, table length: 4,200 mm, table load: 5,000 kg, rotary table diameter: 1,050 mm, rotational speed (max.): 50 rpm, overall weight: 32,050 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,500 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 120, mount diameter: 1,050 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMF 360 linear, manufactured in 2011, with Siemens 840D Solutionline control 120-position tool changer HSK 63 tool interface Spindle speed 18,000 rpm Chip conveyor Coolant system, 1000 liters, 80/40 bar Work area enclosure 3D probe, Heidenhain Blum laser Kedpfjz Riy Rsx Ahbedu Handwheel Air blow through the spindle Coolant nozzle Automatic doors A-axis, Lehman EA 420 Hydraulic clamping system for rotary table Robot interface Oil and emulsion mist separator

Condition: ready for operation (used), Year of construction: 2007, Key Technical Specifications • Type: 3-axis vertical machining center / traveling-column milling machine • Travels (X / Y / Z): 2,200 mm / 560 mm / 720 mm (approx. 220 cm X-axis) • Table Size (L x W): 2,600 x 600 mm • Maximum Table Load: 2,200 kg • Spindle Speed: Up to 18,000 RPM (common configuration for this model variant) • Tool Taper: SK 40 • CNC Control Unit: Heidenhain iTNC 530 Kjdpfxez Tc E Sj Ahbjdu • Machine Weight: Approximately 12 tons

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, total height: 2,150 mm, total width: 1,450 mm, table width: 230 mm, table length: 1,244 mm, table load: 230 kg, overall weight: 950 kg, spindle speed (max.): 5,100 rpm, product length (max.): 1,400 mm, number of axes: 3, This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details. Kdodpfx Aszq A A Hehbju - Type: Manual multifunctional 3-axis drilling and milling machine- Digital Readout: DPA 21- Modifications / Upgrades: Drive Upgrade- Total Connected Load: Approx. 1.5 kW (may be higher due to modifications)- Electrical Voltage: 400 V- Phases: 3 Ph- Current Type: ~- Mains Frequency: 50 Hz- Cutter Head Size Max.: 76 mm- End Mill Size Max.: 18 mm- Vertical Spindle Throat/Reach: 233 - 533 mm- Vertical Spindle Tool Holder: ISO 40 DIN 2080- Vertical Spindle Speed Range: 10 - 5100 rpm- Vertical Spindle Number of Speed Ranges: 6- Vertical Spindle Speed Control: Electronically adjustable- Horizontal Milling Table Length: 1244 mm- Horizontal Milling Table Width: 230 mm- Distance Vertical Spindle to Horizontal Table Min.: 57 mm- Distance Vertical Spindle to Horizontal Table Max.: 463 mm- Horizontal Table T-Slot Size: 16 mm- Horizontal Table T-Slot Number: 3- Horizontal Table T-Slot Distance: 63 mm- Horizontal Table Max. Load Capacity: 230 kg- Number of Coolant Pumps: 800 mm automatic- Vertical Spindle Continuous Duty S1 Drive Motor Power: 1.5 kW- X-Axis Travel Automatic: 24 mm- Y-Axis Travel Automatic: 20 mm- Spindle Speeds: Stepless speed control- Drilling/Milling Head Inclination: Tiltable ± 45°- Reach / Throat: 215 - 533 mm MF 2Vario DPA- Drilling Depth Stop: Adjustable with millimeter scale, readable from the front- Protective Shield: Height-adjustable, large dimensions- X-Axis: Motorized table feed, stepless speed control, rapid traverse, right/left rotation, cross table

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, EDM 313MF30-SLM, Year of manufacture 2008/2023 Technical data: Adjustment travel XxYxZ 620x420x400mm workpiece clamping table 1000x600mm tank size 1070x670mm Filling height of the working tank 400mm distance table-electrode holder 150/550mm Workpiece weight max.1500 kg Kdodpjmx Slhofx Ahbou Dielectric min. 1200 L dimensions 2550x2430x2500mm Weight of the machine 3900 kg Equipment: - color: aluminum metallic (silver) - new electrical cabinet - lifting speed (highjump) 15m/min. - contact protection new - cooling unit Termogamma TG13/14 - linear scale in all axes - C-axis 100rpm, direct measurement 0,0001 Holding brake - chuck EROWA ITS/Hirschmann/3R - Cartridge filter system - User interface MF30 V.3.0 - Exopuls+ 60A Rev. 4 - New ball screw, bearings, couplings - Screen Automation Touch Panel - Hand control panel with enable button - Pumps, filling - filter - and spraying pump - New maintenance unit with digital pressure switch - New valve terminal - Table revised (steel) - WZW 6-fold, option 20/30-fold - Co2 extinguishing system - Warranty 12 months - Transport - IB on site - Training