Used Matsuura Matsuura Tool Magazine for sale (37,429)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Hjdpfx Ajzqunhehgjt Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: used, functionality: fully functional, Tool racks for Matsuura H.Plus300, H.Plus405 MAM72-63V, HG600, MAM72-3VS, etc. Various versions available: BT40 / SK40 Hedeyxtg Uepfx Ahgst Contact us for details!

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 2,648 mm, total width: 5,500 mm, table load: 100 kg, overall weight: 5,500 kg, spindle speed (max.): 46,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 10, tool weight: 1,500 g, product length (max.): 2,700 mm, number of axes: 3, This 3-axis Matsuura LV-500 was manufactured in 2017. It features a maximum spindle speed of 46,000 rpm and a robust table size of 540 x 350 mm with a maximum table load of 100 kg. The machine is equipped with a tool magazine capacity of 10 tools and rapid traverse rates of 90 m/min. If you are looking to get high-quality machining capabilities, consider the Matsuura LV-500 vertical machining center we have for sale. Contact us for further details. • Control: L-Tech 30iB • Table: • Size: 540 × 350 mm • T-slots: 18 mm (3 slots) Hjdpfx Ahjy Uwv Ejgjt • Distance table to spindle nose: 150 – 450 mm • Spindle: • Taper: BT30 BIG-PLUS • Motor: 7.5 / 15 kW • Max torque: 8.86 Nm @ 15,000 rpm • Direct drive • Feed rates: • Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min • Cutting feed: 35,000 mm/min • Minimum increment: 0.0001 mm • ATC (Automatic Tool Changer): • Tool taper: BT30 • Max tool diameter: 46 mm • Max tool length: 150 mm • Tool-to-tool time: 2.2 s • Chip-to-chip time: 5.2 s • Accuracy: • Positioning accuracy: ±0.001 mm • Repeatability: ±0.0005 mm • Power requirements: • Power supply: AC 200/220V ±10% • Required power: 35 kVA • Frequency: 50/60 Hz • Air pressure: 0.54 – 0.93 MPa • Air consumption: 430 NL/min • Tank capacities: • Coolant: 320 L • Oil cooler: 9.5 L • Oil: 1.8 L • Hydraulic: 25 L • Standard equipment: • Spindle oil cooler • Coolant unit • Chip flush • Linear motor cooler • Scale feedback • Air dryer • Synchronized tapping • Work light • Automatic grease lubrication • MIMS system (Matsuura Intelligent Meister System) Technical Specification Taper Size BT 30

Condition: excellent (used), MATSUURA H. PLUS 300 is a Horizontal machining center with high precision, excellent accuracy and reliability. Travels X/Y/Z 500 mm; workpieces Ø 530 mm, h 700 mm; pallets 300×300 mm (10), max workpiece 250 kg, change 7 s. Spindle BT40 50–15,000 rpm, 95.4 Nm, 15/22 kW; feeds 1–50,000 mm/min, rapid 50 m/min; 3×380 V 50 Hz; weight ≈7000 kg; dims 3660×2463×2445 mm. Tool magazine 90 pos., tool change 2 s, chip-to-chip 2.9 s. Coolant 1500 l, chip conveyor, toolholder set, spindle oil cooler. Suited to tight tolerances in automotive, aerospace, medical, watchmaking and mould/die. Hodezqblyopfx Ahget

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The Matsuura MAM72-25V belongs to the well-known MAM72 series and was specifically developed for automated and unmanned 5-axis machining. It is ideally suited for complex workpieces with the highest requirements for precision, process reliability, and cost-effectiveness. The machine combines a compact machine concept with automatic pallet change, a large tool magazine, and simultaneous 5-axis machining. This makes it ideal for single parts, small series, and series production. Hedpfx Ajziy Rrjhgst The MAM72 series is particularly well-established in the following industries: Aerospace Medical technology Precision engineering Tool and die making Mold making Mechanical engineering Automotive Precision technology The MAM72 series was developed by Matsuura specifically for long, unmanned operation and offers high flexibility with a small footprint. Highlights: ✔ Simultaneous 5-axis machining ✔ Automatic pallet change ✔ Ideal for unmanned manufacturing ✔ Very high precision ✔ Direct drive of the rotary axes ✔ Fanuc control ✔ High process reliability ✔ Short tool change times ✔ Compact footprint ✔ Ideal for multi-machine operation ✔ Excellent for complex components ✔ High repeatability

Condition: ready for operation (used), Year of construction: 2010, A Matsuura CNC horizontal machining center is offered. Travel X/Y/Z: 660mm/660mm/660mm, feed rate X/Y/Z: 60m/min, rapid traverse X/Y/Z: 60m/min, number of pallets: 2/6/12/24/36, pallet size X/Y: 500mm/500mm, max. pallet load: 400kg, max. workpiece diameter: 700mm, max. workpiece height: 850mm, max. spindle speed: 12000rpm, spindle power: 15/22kW, max. torque: 187.3Nm at 1120rpm, tool interface: SK40/BT40/HSK63, tool magazine: 60-530 tools, max. tool diameter: 80mm/150mm, max. tool length: 350mm, max. tool weight: 10kg, tool change time: 0.9s, control: Fanuc Matsuura G-Tech 31iB. The machine is integrated into an automation line. The loading-side door is missing. Broken auger for transverse chip transport from the machine bed to the main chip conveyor. The machine is available from calendar week 37. Inspection by appointment is possible. Established machine-tool terminology such as horizontal machining center, tool interface, tool magazine, rapid traverse and rpm has been used. Hjdpfx Ahjzklg Iogjt

Year of construction: 2018, condition: used, We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts * Hjdpfxevfdvbo Ahgot

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, table width: 550 mm, table length: 1,150 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 28, number of axes: 3, This 3-axis Matsuura Vplus 1000/40 was manufactured in 2005. It features a travel range of 1020 mm in the X-axis, 550 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a table size of 1150 x 550 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Matsuura Vplus 1000/40 vertical machining centre we have for sale. Contact us for further details. • Travel X: 1020 mm • Travel Y: 550 mm • Travel Z: 500 mm • Table Length: 1150 mm Hsdpfx Ahozwu Stogst • Table Width: 550 mm • Table Load: 500 kg • Spindle Speed: 12,000 rpm • Tool Holder: SK40 / BT40 • Rapid Traverse: 40 m/min • Tool Positions: 28 Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 600 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Matsuura H. Plus 405 was manufactured in 2006. It features an X-axis travel of 600 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm, along with a 360° rotary B-axis. The machine has a maximum workpiece size of 700 × 850 mm and a tool changer capacity of 60 tools. If you are looking to get high-quality machining capabilities, consider the Matsuura H. Plus 405 horizontal machining centre we have for sale. Contact us for further details. Hsdjzwp S Ujpfx Ahgot • B-Axis: 360° rotary table • Rapid Traverse X/Y/Z: Up to 60 m/min • Pallet Size: 500 × 500 mm • Maximum Workpiece Size: 700 × 850 mm • Maximum Workpiece Weight: 400 kg • Pallet Changer: 2-position • Main Spindle Speed: Max. 12,000 rpm • Tool Holder Options: SK40 / BT40 / HSK63 • Max Spindle Drive Power: 15 / 22 kW • Maximum Spindle Torque: 187 Nm • Tool Changer Capacity: 60 tools • Chip-to-Chip Time: Approx. 3.5 sec. Technical Specification Taper Size SK 40

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Hjdpezr Ha Eofx Ahgjt

Condition: used, Year of construction: 2012, x-travel 0760 mm y-travel 845 mm z-travel 760 mm control 840DI Siemens table-size 500 x 500 mm feed 0- 60 m/min workpiece weight max. 350 kg type of pallet-changer 4 St. milling head speed 12000 U/min numbers of tools in magazin 320 tool taper 63 HSK Hsdpfsywntgox Ahgst A- axe (swivel) 30- 120 ° B- axe (turning) 360 ° total power requirement 83 kW weight of the machine ca. 15 t dimensions of the machine ca. 6 x 4 x 2,5 m 5 axes machining center with swiveling and turning table. Control Siemens 840 DI. Machine will be supplied with many spare parts. Machine has cooling through spindle, dust exhaust and a 4- pallet exchange storage. We will deliver a measuring tracer RENISHAW OMP60 along with the machine and 10 pieces tool holders.

Condition: ready for operation (used), Matsuura RA-1G RA-IG Machining Center X axis: 550mm Y-axis: 410mm Z-axis: 460mm RPM: 15000 RPM Cone: 40mm Steering: yasnac Year of construction: 1999 Transport dimensions: 250x270x235 cm (LxWxH) With pallet changer With tool changer 30 pieces with chip removal Video available on request! Location: Hamont-Achel, Belgium Matsuura RA-1G RA-IG Bearbeitungszentrum X axis: 550 mm Y-axis: 410 mm Z-axis: 460 mm Speed: 15000 U/min Cone: 40 mm Kontrollen: Yasnac Construction year: 1999 Transport dimensions: 250x270x235 cm (LxWxH) Hsdpfx Aott Sxdjhget with pallet handler Mit Werkzeugwechsler 30-teilig with clamping device Video auf Anfrage erhältlich! Standort: Hamont-Achel, Belgium Matsuura RA-1G RA-IG Machining Center X axis: 550mm Y axis: 410mm Z axis: 460mm Speed: 15000 RPM Cone: 40mm Controls: yasnac Year of construction: 1999 Transport dimensions: 250x270x235 cm (LxWxH) with pallet changer With tool changer 30 pieces with chip removal Video available on request! Location: Hamont-Achel, Belgium

Condition: used, Year of construction: 2006, functionality: fully functional, MATSUURA MAM72-35V 5 AXIS 32 PALLET MACHINING CENTER Hsdsx U D Twopfx Ahget G-TECH 16i CONTROL 2006 MACHINE Supplied with 20 BT 40 tools and 5 pallets 15 k Spindle . £65k plus vat.

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 560 mm z-travel 500 mm Control Matsuura G-Tech 30i max. turning speeds 20.000 min/-1 number of tool places 210 Pos. total power requirement 52 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - 5-pallet changer - new spindle including ceramic ball bearings - new spindle cooler Hedpfx Ahjyigalogot Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2016, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 19979, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 40 mm, feed length Y-axis: 40 mm, feed length Z-axis: 40 mm, nominal power (apparent): 75 kVA, torque: 191 Nm, controller manufacturer: Fanuc, controller model: G-Tech 31 iB, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 450 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 90 bar, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 10,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MX-850 Milling Machine – Year of Manufacture 2016 – Excellent Condition For sale is a reliable and high-performance MX-850 milling machine from 2016. The machine is in good, well-maintained condition and is fully operational. Hjdpfx Aey Dd Exohget With approximately 14,000 operating hours, the machine has been regularly serviced and professionally used throughout. Particular mention should be made of the spindle, which runs exceptionally smoothly and is almost like new—ensuring precision and high machining quality. The MX-850 stands out for its robust construction, high accuracy, and versatile applications in daily production. It is ideal for a wide range of milling operations and perfectly suited for both single and series production. Equipment & Details: - Model: MX-850 - Year of manufacture: 2016 - Operating hours: approx. 14,000 h - Condition: good - Spindle: excellent run, nearly as new - Function: perfectly operational, ready for immediate use - Coolant system (Knoll) included - Chip conveyor included - Transformer included Scope of delivery note: The machine is sold without tools, holders, or LANG clamping system – only the machine itself and the above-mentioned peripherals are included. The machine has always been handled with care and regularly maintained. It is currently still in operation and can be inspected by appointment. If you are interested or have further questions, please feel free to contact us.

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 max workpiece dia x height 330 x 300 mm Hsdpfx Ahoy Ny Akogot Movement X-axis 435 mm Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Hsdezvni Aopfx Ahgot Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available

Condition: used, Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 400 kg, total height: 2,640 mm, total length: 5,870 mm, total width: 3,440 mm, overall weight: 11,300 kg, table length: 500 mm, table width: 500 mm, rotational speed (min.): 15,000 rpm, Equipment: documentation/manual, Horizontal machining centre CNC Control Matsuura G-tech 16i Pallet table size 500x500 mm Movement X-Y-Z-Axis 600x600x600 mm Magazin capacity 240 Hedpfx Aey N Awdshgjt Number of pallets: 6 Table load 400 kg Spindle speed 15000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2000027, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 30 kVA, torque: 150 Nm, controller manufacturer: fanuc, controller model: FANUC 31İ-MODEL B, workpiece length (max.): 1,200 mm, workpiece width (max.): 600 mm, table width: 600 mm, table length: 1,200 mm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, documentation/manual, MATSUURA VX-1000 1200x600mm 15,000 RPM. Hsdpfxjzgv Ize Ahgot Our machine was purchased specifically in 2014 for a precision job. It has never been used for rough machining. It has low operating hours. If you have any questions or need further information, please send us a message or call us.

Condition: used, Year of construction: 2015, operating hours: 12,439 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, nominal power (apparent): 30 kVA, workpiece length (max.): 250 mm, workpiece width (max.): 250 mm, workpiece height (max.): 185 mm, operating hours of spindle: 12,439 h, input voltage: 415 V, type of input current: three-phase, Lumex Avance-25 by Matsuura, including automatic CAM software. For clarification: this is a machine that, during the melting process (all 10 layers in standard configuration with a layer thickness of 0.05 mm), also performs surface finishing through HSC milling. This means that the contour is milled to the exact dimensions every 0.5 mm, resulting in clean surfaces as typically seen in CNC milling. The Lumex Avance-25 is an excellent solution for those who want to participate in the world of hybrid additive manufacturing at the highest level. It combines laser sintering and milling in a single machining center. With its help, you can efficiently produce complex and precise parts while simultaneously benefiting from the flexibility and versatility of additive manufacturing. Details: Year of manufacture: 2015 Spindle hours: 12,439 Laser hours: 3,476 Build volume: 250x250x185 Gallery of manufactured components: alesco-gmbh.de/leistungen/additive-fertigung-3d-druck/ With its robust design and proven performance, the Lumex Avance-25 is an investment that pays off. It offers a combination of reliability, precision, and efficiency, making it an excellent choice for any workshop or production line. Hjdpfxezm Ub Hs Ahgst Please do not hesitate to contact us for further information or to arrange a visit. We look forward to helping you discover the potential of the Lumex Avance-25 for your company. Further inventory and prices can be found at: inventar-verkauf.de/id/alesco Voltage: 415 V Voltage tolerance: ±10 % Frequency: 50 Hz Frequency tolerance: ±1 Hz Number of phases: 3 Capacity: 30 kVA Current: 41 A Short-circuit current: 30 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 18199, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 210, TECHNICAL DETAILS CNC control: FANUC 30iM for 5-axis machining Working area Travel in X-axis: 550 mm Travel in Y-axis: 410 mm Travel in Z-axis: 450 mm Swivel range of B-axis: +110 to −110° Rotational range of C-axis: 360° Feed rate Rapid traverse rate for X, Y and Z axes: 50,000 mm/min Rapid traverse rate for B-axis: 30 min⁻¹ Rapid traverse rate for C-axis: 50 min⁻¹ Tool magazine Number of tool positions (standard): 30 Extension of the tool magazine: 210 tool positions Preparation for expansion to 240 tool positions Pallet system Number of pallets: 10 Pallet size: Ø 130 mm Pallet interface: Capto C6 Workpiece size: max. Ø 250 × H 250 mm Workpiece weight: max. 40 kg Pallet clamping force: 22.5 kN Main spindle Spindle speed: 40 – 20,000 rpm Motor power: 7.5/11 kW Spindle torque: max. 70 Nm up to 1,500 rpm Spindle interface: HSK 63A Special functions: High-speed start-up at machine start, Automatic warm-up cycle MACHINE DETAILS Machine weight: approx. 12,000 kg Coolant system Coolant pressure through the spindle: 70 bar Delivery rate of internal cooling: 24 l/min Pump capacity of internal cooling: 5.5 kW EQUIPMENT Direct linear scale from Heidenhain in the X, Y and Z axes Linear scale with pneumatic locking Direct linear scale via rotary encoder for the B and C axes Hsdpjzpyh Rofx Ahgst CE marking KNOLL coolant system Drag chain chip conveyor Coolant filter CTS25-50T External cooling Coolant shower Compact filter KF200 Cooling water cooler VWK 90-D Coolant spray bars in the working area Two spiral chip conveyors Mechanical air filter TEBARON TEB/BV2 Single column with base plate for the air filter system Measuring probe Renishaw OMP 60 Software Easy Probe Pressure sensor for tool length measurement and tool breakage monitoring

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Fanuc, controller model: 30i, spindle nose: BT40, number of slots in tool magazine: 51, input voltage: 380 V, type of input current: three-phase, MATSURA HPLUS 405 2007 MODEL PALLET SIZE 500-500 FANUC 30i CONTROL SYSTEM BT40 12000 rpm SPINDLE KNOLL TYPE COOLING SYSTEM NEARLY AROUND 50 SETS OF TOOL HOLDERS ALONG 51 TOOL CAPACITY ATC 600-600-600 X-Y-Z AXIS TRAVEL IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! Hedpfx Aeyrdywehget You are welcome to contact us for your further questions CNC World Machine LTD

Condition: used, functionality: fully functional, The TOOLTEMP company is selling TT-157e temperature control units. All units have been fitted with new filling and cooling valves. The price is per unit. Medium: Water, max. 90°C Microprocessor controller MP-694 Heating power: 9 kW, manual stepped control 3/6/9 kW Cooling power: 18 kW Filling volume: 6 liters Connections: Heating circuit R1/2" internal thread; cooling water R3/8" external thread L/W/H: 600 mm x 230 mm x 600 mm Weight: 47 kg Hsdpfozxa Nyex Ahgot

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table load: 750 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 120, number of axes: 4, This 4-axis Matsuura H.PLUS-500 was manufactured in 2008. It features a continuous table with 7 ground pallets, X, Y, and Z-axis travels of 800 mm, and a B-axis with 360° continuous indexing. The machine has a maximum workpiece diameter of Ø850 mm and a maximum workpiece height of 1050 mm. If you are looking to get high-quality machining capabilities, consider the Matsuura H.PLUS-500 horizontal machining centre we have for sale. Contact us for further details. • Axes/Travels: B-axis 360° (continuous/indexed) • Pallet system: 2 pallets; pallet size 500 × 500 mm • Workpiece capacity: max diameter Ø850 mm; max height 1050 mm Additional equipment • Continuous table • 7 ground pallets Technical Specification Hjdpfx Ahjy U Hndsget Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Internal cooling: 70 bar EQUIPMENT Hsdpsy Atwuofx Ahgst 6-position pallet changer 4th axis Knoll high-pressure system Note: The machine has already been dismantled.