Used Mas Drill for sale (8,030)

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill MAS - VO 32 MACH-ID 9618 Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Lhodpfx Aey Rznweb Ajn Speeds / ranges: 4500Rpm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1996, Radial drilling machine, MAS Kovosvit V0 80, serial number 151321248, manufactured in 1996, weight approximately 12,000 kg, overhang approximately 200 cm, with a large clamping cube. Lhsdpfsz Ib Uyox Ab Ajn

Condition: excellent (used), Year of construction: 2004, Control system: Heidenhain Working area Swinging diameter over bed: 320 mm Swinging diameter over carriage: 150 mm Distance between centers: 800 mm Working spindle Spindle mount according to DIN 55027: B6 Spindle bore: 50 mm Spindle taper, metric: 60 Main drive Motor power at speed 1500 min-1: 7 kW Spindle speed range, 1st gear: 0 - 1000 min-1 Spindle speed range, 2nd gear: 20 - 4000 min-1 Max. spindle torque 1st gear: 360 Nm 2nd gear: 90 Nm X-axis Max. travel: 190 mm Rapid traverse: 5000 mm/min Max. feed force: 3000 N Z-axis Max. travel of bed carriage: 750 mm Lodpfxszdp Txs Ab Aohn Rapid traverse: 8000 mm/min Max. feed force: 5000 N Quick-change tool holder MULTIFIX B Max. steel diameter: 25 x 25 mm Tailstock Diameter of quill: 65 mm Quill travel: 120 mm Internal taper of quill – Morse: 4 Machine dimensions Length: 2180 mm Width: 1341 mm Height: 1775 mm Machine weight: 2150 kg Power requirement: 21 kVA

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Lodpfx Asyrdplob Ashn Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2020, functionality: fully functional, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Upper drilling heads: - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 - Air cooling The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Lhedozux T Nspfx Ab Ajn Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, functionality: fully functional, Manufacturer: MAS-KOVOSVIT Machine type: Radial drilling machine Condition: used, good technical condition, ready for operation Technical specifications: • Drilling capacity in steel: 80 mm • Drilling capacity in cast iron: 110 mm • Arm length: 4,000 mm • Vertical arm travel: 1,600 mm • Horizontal head travel: 3,470 mm • Spindle taper: Morse 6 • Spindle diameter: 65 mm • Spindle stroke: 475 mm • Spindle speed: 9–1,400 rpm • Feed rate: 0.035–2.8 mm/rev • Distance spindle nose to table: 710–2,785 mm • Max. workpiece height: 2,785 mm • Drilling diameter range: 80–300 mm • Swing range: 0°–360° • Total power: 13.8 kW • Weight: approx. 19.5 t • Overall dimensions (L×W×H): 6,010 × 1,800 × 5,205 mm Equipment: Lhsdpfxsx Uqcfj Ab Asn • 2 worktables Location: Machine in stock in central Poland. Further information available upon request.

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, arm length 2150 mm, drilling capacity 80 mm weight 7000 kg Lsdpfx Abeyzq Dpo Aohn

Condition: ready for operation (used), MAS VR4A radial drilling and milling machine Type: VR4A Height adjustment 750 mm Throat 1250 mm Spindle diameter: 80 mm Mounting MC5 Spindle stroke: 300 mm Speed: 2500 rpm Bed: 760 x 1400 mm Dimensions: 225 x 90 x 255 cm LxWxH Weight 3200 kg With separate coolant tank and pump Lhjdpsv Nzcaofx Ab Ajn

Condition: used, Year of construction: 1997, Technical details: bore capacity in steel (diameter): 32 mm x-travel: 750 mm y-travel: 520 mm drill capacity in cast iron: 45 mm revolution per minute: 90 - 4500 U/min feed steps: 6 bore spindle stroke: 250 mm boring spindle diameter: 30 mm drill spindle - Morse Taper: MK4 vertical adjustment of the arm: 520 mm throat max.: 1000 mm throat min.: 250 mm column diameter: 400 mm swivel range of the arm: 180 ° table clamping surface LxW: 1150 x 800 mm total power requirement: 3,5 KW weight of the machine ca.: 2000 kg dimension machine approx.LxWxH: 1,7 x 1,07 x 2,61 m The KOVOSVIT VO 32 is a robust and versatile radial drilling machine designed for industrial applications. The machine is suitable for drilling, boring, countersinking, reaming, and tapping operations in steel, cast iron, and other materials. Thanks to its swiveling radial arm and large reach, even large and heavy workpieces can be machined conveniently without the need for complex repositioning. The machine features a massive cast-iron construction, a powerful main drive, and an automatic feed system. The drilling head can be moved along the radial arm, providing a large working area. Its solid design ensures high precision, reliability, and a long service life, even under continuous operation. Equipment: ·Including coolant pump ·1 × boring tool block (boring cube) ·1 × machine vise * Lodpfszgwgfsx Ab Ashn

Condition: good (used), Year of construction: 2000, machine/vehicle number: 152362081, functionality: fully functional, throat depth: 2,700 mm, spindle diameter: 110 mm, sheet thickness steel (max.): 100 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, Radial drilling machine MAS U 1000 Year of construction 2000 Conventional / digital control With face plate 1,000 mm and tool package Viewing is possible at any time by arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Radial drilling machine MAS | MAS1000 | U1000 Ledpfx Abjrwxpfj Ajhn

Condition: used, functionality: fully functional, KOVOSVIT VO 63 Radial Drilling Machine – Drilling Capacity 80/100 mm Lhjdpfoz Rpadjx Ab Aen For sale: used KOVOSVIT VO 63 radial drilling machine, manufactured in the former Czechoslovakia. Heavy-duty industrial radial drill designed for drilling, boring, countersinking and tapping operations on large and heavy metal workpieces. The machine features a height-adjustable and swivelling radial arm, a horizontally movable drilling head and a heavy-duty base plate with T-slots. Technical specifications: - Manufacturer: KOVOSVIT Holoubkov - Model: VO 63 - Max. drilling capacity in steel / cast iron (solid drilling): 80 / 100 mm - Max. tapping capacity in steel / cast iron: M85 - Max. spindle nose diameter: 100 mm - Spindle travel: 380 mm - Spindle taper: Morse MT6 - Number of spindle speeds: 16 - Spindle speed range: 11.2–2,000 rpm - Number of spindle feeds: 16 - Spindle feed range: 0.035–2.8 mm/rev - Spindle reach min./max.: 386–2,000 mm - Distance from spindle to base working surface min./max.: 473–1,803 mm - Base working surface: 1,100 × 2,300 mm - Number of T-slots: 3 - T-slot width: 22 mm - Distance between T-slots: 250 mm - Main motor power: 7.5 kW - Power supply: 3 × 380 V / 50 Hz - Connected power: 10 kVA Dimensions and weight: - Length: 3,700 mm - Width: 1,380 mm - Height: 4,050 mm - Machine weight: 7,100 kg Equipment and features: - Height-adjustable and swivelling radial arm - Horizontally adjustable drilling head - Mechanical spindle speed and feed selection - Mechanical spindle feed - Heavy-duty base plate with T-slots - Conventional control Machine condition: Used machine in the visual condition shown in the attached photographs. Normal signs of age and previous use, including paint wear and areas of superficial corrosion. Further information available upon request.

Year of construction: 1999, condition: used, Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible. Lhjdpfozuzziox Ab Aon

Condition: good (used), Hang 114-30/4 Paper Drill Machine The unit is in perfect condition and 100% functional. A top-tier machine in the category of paper drills. This is a currently manufactured model, featuring the most comprehensive equipment configuration available. Equipped with two integrated frequency converters (inverters) for stepless spindle speed adjustment (260 – 1,800 rpm) and smooth table elevation. Rapid drill zeroing/alignment system. The drilling table is adjustable in all planes; the margin (backgauge) setting is controlled via dial indicators. Waste material is directed into an external container. Operated via an electric foot switch. Lhedpfx Asz S Un Aeb Ajn Energy-saving standby mode. Automatic drive belt tensioning. Each drilling head features independent adjustment, allowing for the use of drills of varying lengths. Includes a cooling and lubrication system for the drills. Technical specifications: Number of drilling heads: 4 Drill diameter: 3–10 mm Stack height: 65 mm Drill spacing: min. 36 mm / max. 260 mm Table dimensions: 600 x 480 mm Power supply: 400 V Weight: 400 kg The machine comes with documentation, maintenance tools, and drill bits.

Condition: good (used), Nagel Citoborma 280B Paper Drill The unit is in 100% working order. It is one of the latest models. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. Lodpfx Aoz S Upmeb Aohn The installed table is an enlarged version. Additionally, the paper drill is equipped with an automatic table lock that releases after every cycle. Excellent condition. Robust construction – weight: 76 kg. Power supply: 380V. Two drilling heads with an adjustable spacing range of 45–120 mm. Drill bit diameter: 2–20 mm. Stack height: 60 mm. The machine has undergone a full inspection. Includes drill bits, tools, a new cutting stick, and an instruction manual.

Condition: good (used), Stago PB 2015 Paper Drill The latest model from the manufacturer Stago; this machine comes from the office of a large company. The unit is 100% functional. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill is equipped with an automatic table-locking mechanism. Robust construction – weight approx. 70 kg. Power supply: 380V. Two drilling heads. Drill bit diameter: 2–10 mm. Stack height: 60 mm. Adjustable spacing between the heads. Lodpfjz S Uwqjx Ab Aohn The drill has undergone a full inspection. Includes drill bits and tools.

Condition: good (used), Nagel Citoborma 111 paper drill The unit is 100% functional and in very good condition. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. Robust construction – weight: 35 kg. This is one of the latest Citoborma drill models, currently still in production. Power supply: 230V. Drill bit diameter: 2–9 mm. Lsdpfx Aez S Ui Heb Ashn Stack height: 50 mm. Includes drill bits, a new drilling stick (cutting strip), and an instruction manual. Made in Germany.

Year of construction: 1999, condition: excellent (used), 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm Lhedpfx Ash Txmtjb Aon

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Lhjdpfx Ajqa Txqob Asn Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: good (used), Year of construction: 2015, operating hours: 24,272 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, torque: 406 Nm, controller manufacturer: Heidenhain, overall weight: 11,800 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, MAS KOVOSVIT MCV 1270 Power Year of manufacture: 2015 Heidenhain iTNC 530 control system X-axis: 1270 mm, Y-axis: 610 mm, Z-axis: 720 mm Tool changer: 24-position SK50 Spindle speed: up to 8000 rpm Spindle torque: 406 Nm / 100% 623 Nm / 40% Chip conveyor Coolant pressure: 20 bar Lodpezydarofx Ab Ajhn Weight: 11800 kg

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Lhodpfx Aetv Ikljb Ajn Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: used, Year of construction: 1983, bore capacity in steel (diameter) 50 mm Lhsdpfjyqv Uksx Ab Asn arm length 1250 mm workpiece height max. 1500 mm bore capacity in cast iron 60 mm threading . diameter of quill . mm spindle taper MT 5 turning speeds 28-2.500 U/min Max. drilling capacity taper: Diameter: 50 mm Max. spindle-to-table distance: 1500 mm Min. spindle-to-table distance: 320 mm Travel spindle: 310 mm KW: ??4 Volts: 400 Machine number: 869 Included: Clamping cube 1000x750x500 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1982, Drilling diameter: 50 mm, gray cast iron: 60 mm Maximum spindle-guide distance: 1600 mm Vertical arm travel: 875 mm Carriage travel on the arm: 1280 mm Arm rotation: 180° Morse 5 spindle taper Spindle stroke: 310 mm Number of spindle speeds: 16 Lhsdpfxewlh E Sj Ab Asn Maximum spindle torque: 31,000 Nm Mounting surface: 1820 x 986 mm Dimensions: 3100 x 1120 x 3396 mm Weight: 4300 kg

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Lsdpfx Aew Hanhjb Aehn Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: excellent (used), Year of construction: 2013, Control Siemens Sinumerik 840D Max. turning diameter: 280 mm Max. bar capacity main spindle: 61 mm Turning length: 490 mm Ledpfx Abjzwhkie Ajhn Spindle speed main/sub spindle: 4700 / 6000 rpm 12-position turret with driven tools C-axis Y-axis Parts catcher Workpiece ejector Chip conveyor Various tool holders

Condition: used, Year of construction: 2023, Used for the production of refrigerator door panels. Line Specifications: Manufacturer: MAS AUTOMAZIONI SRL Year of manufacture: 2023 Electrical supply: 400 V (±10%), 50 Hz Compressed air: 4.5-6 bar, dew point +5°C Cycle time: 10 seconds Changeover time: Automatic Line dimensions: 38.1 m (L) × 9.6 m (W) × 4.4 m (H) Lsdezummqopfx Ab Aehn Sheet dimensions: Length: 400-2200 mm (±1 mm) Width: 650-900 mm (±1 mm) Thickness: 0.35-0.55 mm (±0.04 mm) The metal sheet forming line consists of: Sheet loading with measuring laser sensors. Punching and bending station with 2 sets of bending blades for different shapes. 2 available spaces for additional bending or forming stations. 2nd punching stations. Total number of pieces produced to date: 89,963. 2 scrap conveyors. Siemens S7 control system.