Used Mark Msc37/10 for sale (33,823)

Condition: good (used), Year of construction: 2010, MANUFACTURER: BRAND MODEL: MSC37/10 SERIAL NO.: API200079 YEAR: 2010 POWER (kW): 37 Godpfx Akjylbd To Usbt CAPACITY (m3/min): 6.70 PRESSURE (bar): 10

Year of construction: 2015, condition: like new (used), I sell the screw compressor: MARK MSB 30/10 Gjdjiu Icvopfx Ak Ujbt Motor - 30kW, Power - 3540 l/min., 212 m3/hr. Pressed air max.10 bar Year 2015. All working, like new.

Condition: good (used), Year of construction: 1992, functionality: fully functional, 1 x screw compressor Gjdpfezgc Sgsx Ak Uebt Make RF 10 YD Year of manufacture: 1992 with refrigerant dryer Renner RKT CQ 0065 Year of manufacture: 2017 + receiver tank OKS 500 liters / max. 11 bar Year of manufacture: 1998 Technical data: max. pressure 10 bar Power: 7.5 kW Air flow rate: 930 l/min Operating noise: 70 dB (A) The system can be inspected while it is running.

Year of construction: 2004, condition: excellent (used), SCREW COMPRESSOR, MSC37 MODEL, 37kW, WITH FREQUENCY CONVERTER!!! MARK MSC37 IVR screw compressor (ATLAS COPCO screw stage) – machine with frequency converter. Technical data: Capacity: 6.08 m3/min; Engine power: 37 kW; Pressure: 8 bar; Operating hours: 12942h!!! Year of manufacture: 2004; Compressor in fully working condition. Gjdpeh Ngc Eefx Ak Uobt Net price: 18,500 PLN Gross price: 22,755 PLN

Condition: excellent (used), Year of construction: 2013, volume flow: 7.7 m³/h, pressure (min.): 10 bar, Mark RMC 45 IVR screw compressor Gedpfx Aozkmq Uok Ujbt Variable speed (inverter-driven) 45 kW motor Capacity: 7.70 m3/min Pressure: 10 bar Year of manufacture: 2013 Compressor is in fully working order.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: WCF300810, overall weight: 1,300 kg, volume flow: 1,029.6 m³/h, pressure (max.): 9.5 bar, Equipment: type plate available, PROD. Mark TYPE RME 110 IVR G7 AIR S/N WCF300810 Godjwn Duzspfx Ak Uebt YEAR 2006 CAPACITY (kW) 110 OUTPUT (m3/min) 17.16 CIS (bar) 9.5 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) yes ON TANK no DOCUMENTS no NEW/USED USED

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, We offer for sale a screw compressor with an integrated condensation dryer, type Aircraft / Fini A-K-Max 7.5-10-270 K (IE3), manufactured in 2021 by Aircraft. It is manufactured and marked according to CE standards (European conformity). The compressor has been used sparingly and regularly serviced, with documented operating history, including Czech operating and maintenance manuals. Technical parameters: Capacity: 1050 l/min, Maximum pressure: 10 bar, Tank size: 270 l, Dimensions: L: 1200, W: 680, H: 1540 mm, Weight: 280 kg, Electric motor power: 7.5 kW, Voltage: 400 V, Sound pressure level Lp 62 dB. The compressor is in very good technical condition and is ready for immediate use. It can be viewed at our warehouse in Přerov. Gbsdpfx Akozy Spze Uet

Condition: ready for operation (used), A stationary oil lubricated, belt driven reciprocating compressor from Mark with an air receiver is offered. Motor power: 7.5kW (10hp), intake capacity: 1300l/min, max. operating pressure: 10bar, air receiver volume: 500l, compressed air connection: G 1/2. Dimensions X/Y/Z: approx. 1910mm/600mm/1230mm, weight: approx. 330kg. Inspection possible by prior arrangement. Gbedpfx Akszmym Ue Ujt

Condition: good (used), Year of construction: 2021, S015464 MANUFACTURER: MARK MODEL: MSM 15 SERIAL NO.: ITJ514259 YEAR: 2021 POWER (kW): 15 CAPACITY (m³/min): 1.68 PRESSURE (bar): 10 OPERATING HOURS (LOAD/TOTAL): 948/1868 FREQUENCY INVERTER: no BUILT-IN DRYER: no Gsdpfxoyh Rx Ns Ak Uebt

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, L & Z Lathe / Bickenbach LE-20-10-S incl. 3-axis digital display -Very well-maintained, original condition from an educational institution -CE marking -Year of manufacture 2008 -Three-axis digital display -Turning diameter 420 mm -Turning diameter over the carriage 250 mm -Turning diameter in the crotch 580 mm -Turning length 1000 mm -Spindle speed range (gearbox) 20 - 2000 rpm -Spindle bore 58 mm -Tailstock taper MK 4 / quill travel 130 mm -Röhm 3-jaw chuck 250 mm & quick-change jaws -Fixed steady rest -Multifix base holder & 3x inserts -Coolant system -Folding protective device for tool holder -Electric chuck guard -Foot brake -Swivel machine lamp -Follower (Röhm) -Machine feet -Bed stop -Chip guard -Emergency stop -Operating tool Gedpfx Akezvpxxs Usbt Dimensions: L x W x H 2.1 x 0.8 x 1.7 meters / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA Gjdpfxotubz Uo Ak Usbt  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: excellent (used), Year of construction: 2015, volume flow: 1.79 m³/h, pressure (min.): 10 bar, MARK MSA 15 screw compressor Mounted on 500 L pressure vessel With refrigeration dryer 15 kW motor Capacity: 1.79 m3/min Pressure: 10 bar Operating hours: 14,100 Gedpfx Akoyui Acj Uobt Compressor fully functional

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: API170347, overall weight: 1,570 kg, volume flow: 736.8 m³/h, pressure (max.): 10 bar, Equipment: type plate available, Compressor MARK RME75 S/N API170347 S002313 Compressor MARK Gbsdpown A Tvefx Ak Uet Type RME75 S/N API170347 Year of manufacture: 2012 Power (kW): 75 kW Capacities (m/min): 12.28 Pressure (bar): 10 bar

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Gbjdpfx Akev Ivnzs Uot Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Gbedpfx Akov Ivn Uj Uot Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator Gedpfxezp Rmqj Ak Uobt - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Gbjdpfxezq Tzae Ak Ust Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: good (used), Year of construction: 2002, functionality: fully functional, overall weight: 700 kg, The 30 kW screw compressor has been disassembled and is ready for shipment. Gbodpfxezb Dq Is Ak Ust

Condition: used, functionality: fully functional, operating hours: 1,616 h, total length: 584 mm, total height: 355 mm, total width: 330 mm, type of input current: AC, overall weight: 16 kg, Sales Description For sale is a Markforged Mark Two 3D printer, one of the leading professional fiber composite 3D printers for manufacturing high-strength functional parts. The printer is in good condition and has only 1,616 operating hours. Thanks to the ability to reinforce components with carbon fiber, Kevlar® (aramid), fiberglass, or HSHT fiberglass, extremely stable and durable components can be produced. Ideal for professional use in development, prototyping, mechanical engineering, motorsports, or the manufacture of fixtures and tools. The printer processes materials such as Onyx, Nylon White, PLA, and TPU, and offers a build volume of 320 × 132 × 154 mm. The scope of delivery includes numerous accessories and consumables:  Kevlar fiber  Fiber spools  Carbon fiber (already installed)  Dry box  Black PLA spools  New blue PLA spool  Print plate  Fiber load tubes  Fiber Bowden tube  Replacement nozzles  Torque driver  L-key set and other accessories Technical Highlights Gbsdpfxjzdnyqj Ak Ujt  Printing process: Fused Filament Fabrication (FFF) with continuous fiber reinforcement  Build volume: 320 × 132 × 154 mm  Materials: Onyx, Nylon White, Precise PLA, TPU 95A  Fiber reinforcement: Carbon fiber, Kevlar® (aramid), fiberglass, HSHT fiberglass  Tensile strength: up to 800 MPa (comparable to aluminum components)  Elastic modulus: up to 60 GPa  Precision print bed: flatness up to 160 μm  2nd generation extruder with material monitoring and out-of-plastic detection  WLAN connectivity (802.11 b/g/n)  Industrial quality for functional prototypes and durable end-use parts The printer is ready for immediate use and is suitable for both companies and ambitious users who want to manufacture high-quality, durable components.

Year of construction: 2009, condition: used, Second-hand machine Environmentally friendly thanks to the use of R404A Gjdjzk Nrhepfx Ak Uobt Energy savings thanks to a rotary refrigerant compressor (20–30% more efficient than (compared to a conventional piston) intelligent drainage system Max. operating pressure: 13 bar compressed air output 5,200 l/min 7,312 m²/hour Motor power 1.58 kW, 230 V Max. inlet temperature 55 °C Dimensions: 557 x 460 x 789 mm Availability: at short notice Storage location: Röllbach

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 330 kg, volume flow: 100.8 m³/h, pressure (max.): 10 bar, type of cooling: air, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM15D TM500 S/N ITJ874646 YEAR 2024 CAPACITY (kW) 15 OUTPUT (m3/min) 1.68 m3/min Gbsdpfxovrcnvo Ak Ust CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK DOCUMENTS YES NEW/USED NEW

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 300 kg, volume flow: 60 m³/h, pressure (max.): 10 bar, tank capacity: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM7.5D TM500 S/N ITJ874643 Godpovrcucofx Ak Usbt YEAR 2024 CAPACITY (kW) 7.5 OUTPUT (m3/min) 1 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK DOCUMENTS YES NEW/USED NEW

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 13100019, type of input current: three-phase, overall weight: 1,000 kg, For sale: a professional log edging saw (optimizing saw) from the renowned German company Winter Holztechnik, model Optimax 100. The machine is fully functional, regularly serviced, and ready for immediate operation. It is ideally suited for the fast and precise removal of defects and the preparation of elements with fixed lengths in joinery workshops. Gbsdpfxozzw Uls Ak Uot Key features and advantages: PLC control: Intuitive touchscreen panel for easy programming. Multifunctionality: Capability for sequential cutting (memory for up to 10 dimensions) and cutting lines marked with fluorescent chalk. Efficiency: The machine can replace the work of several people, offering a speed of up to 80 cycles per minute. Precision: Very high cutting accuracy of +/- 1 mm. Technical data: Saw motor power: 7.5 kW. Feed motor power: 2.0 kW (feed speed continuously adjustable up to 80 m/min). Cutting height: max. 100 mm. Blade diameter: Ø 455 mm (bore 30 mm). Minimum material length: 300 mm. Power supply/Air: 400V / 8 bar.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: ITJ874642, overall weight: 292 kg, volume flow: 42 m³/h, pressure (max.): 10 bar, type of cooling: air, tank capacity: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD.- MARK TYPE - MSM5.5D TM500 S/N - ITJ874642 YEAR - 2024 CAPACITY (kW) - 5.5 OUTPUT (m3/min) - 0.7 m3/min CIS (bar) - 10 BUILT-IN DEHUMIDIFIER - YES ON TANK - 500L DOCUMENTS - YES Gjdjvrcctopfx Ak Uebt

Condition: good (used), FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the "all-round laser" to permanently and sharply mark materials such as metals and plastics. The 1064 nm wavelength is well absorbed by many materials, making it suitable for annealing, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible, and precise marking. How it works: The laser beam creates a focused spot of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A color change of the material through heating. Color change: Creating a color contrast on the material. Material ablation: Removing material to create a depression. Gbedpfsw U T Ebex Ak Ujt Details: Device: FOBA DP 15 Laser Marking System Laser Type: Fiber Laser Wavelength: 1064 nm Focus Length (f): 254 mm (equivalent to 10 inches) Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!