Used Marel Salmon Filleting Back And Belly Trim for sale (10,767)

Condition: excellent (used), Year of construction: 2018, Marel 2730 salmon filleting machine with back and belly trim The Marel MS 2730 is an automated salmon filleting machine designed to maximize yield and throughput, capable of processing up to 25 fish per minute. It features automated size adjustments via a touch screen, includes advanced back and belly trimming, and is built for easy operation and hygiene. The machine accommodates salmon from 1.5 to 8 kg, with optional kits available for smaller fish, and is part of Marel's larger processing solutions. Key Features and Capabilities Automated Processing: The MS 2730 automatically adjusts to different fish sizes and uses electronically controlled tools to maintain high quality and consistent results. High Throughput: It can fillet up to 25 salmon per minute, increasing production efficiency. Improved Yield: The design includes a set of circular knives that capture meat near the center bone, significantly increasing fillet yield. User-Friendly Operation: A multilingual color touch screen provides easy and safe control over all operations, with pre-programmed settings for different fish sizes. Compact Design: The machine has a compact footprint, allowing for easier integration into existing processing lines. Technical Specifications Fish Size: Standard 1.5 to 8 kg, with a kit available for fish as small as 500 g. Water Consumption: Approximately 15 liters per minute. Power Requirements: Operates on 3 x 400V and requires a 3.3 kW power supply. Benefits for Processors Dodpfoy Aul Tsx Albowb Efficiency: Streamlines workflow with automated adjustments and high-speed processing. Quality & Yield: Produces high-quality fillets by including more meat and minimizing waste. Flexibility: Accommodates various fish sizes and is part of a larger, integrated system for comprehensive processing solutions. Cost-Effectiveness: Optimized water consumption reduces operating costs. The fish is fed into the machine belly down, which makes the infeed much easier and faster. An additional set of circular knives cuts the fish from vent to tail. This cut raises yield, as the meat close to the center bone is included in the fillets. For the belly bone cut, 4 sets of finger pressures secure maximum control of the fish and enable optimum cutting of both pre-rigor and post-rigor fillets. The result is high-quality fillets with higher yield and output. The MS 2730 automatically adjusts to various fish sizes, so there is no need to adjust once the program has been switched on. The MS2730 can process up to 25 fish per minute, depending on the length of the fish. With the built-in system for measuring the fish´s profile and size, the electronically controlled cutting tools can automatically adjust the filleting program to the fish´s size and shape. The result is higher throughput, quality and yield depending on trim specifications. With the optional small fish kit installed, the MS 2730 is capable of filleting fish weighing from 500 g up to 4 kg. Manufacturer: Marel Model: MS 2730 Year: 2018 Capacity: 25 fish per minute Fish size: 1,5-8 kg. Power Supply: 400/230V / 50 Hz Power: 5,5 kW Water consumption: 15 liter/min. Machine dimensions (LxWxH):  3.150x1.035x1.980 mm Machine weight: 1.000 kg.

Condition: excellent (used), Year of construction: 2016, Marel 2630 Salmon Filleting Machine If you’re processing salmon or trout, the Carnitech CT 2630 will give you a competitive advantage. The dual knife system – band and circular – ensures a clean, precise cut every time. This results in a higher yield, less waste, and a better-quality fillet. It is designed to handle fish ranging from 2 to 7 kg, processing up to 20 fish per minute without compromising cut quality. The integrated compressor and low water consumption make it efficient and hygienic. Add the circular knife grinder accessory to maintain optimal performance. This machine is all about fast, clean, and consistent output. Unique cutting principle Combination of circular knives and band knives Significantly improved yield Electrical panel and compressor with dryer are fully integrated Easy access for cleaning Djdpozyk Amofx Albjwb Manufacturer: Mare Model: CT 2630 Year: 2016 Fish size: 2-7 kg Capacity: Up to 20 fish/minute Electricity: 3x400V Power consumption: 4.0 kW Machine dimensions L x W x H: 2,000 x 850 x 1,650 mm Machine weight: 675 kg

Condition: ready for operation (used), Year of construction: 2011, Marel 2630 Salmon Filleting Machine If you’re processing salmon or trout, the Carnitech CT 2630 will give you a competitive advantage. The dual knife system – band and circular – ensures a clean, precise cut every time. This results in a higher yield, less waste, and a better-quality fillet. It’s designed to handle fish ranging from 2 to 7 kg, processing up to 20 fish per minute without compromising cut quality. The integrated compressor and low water usage make it efficient and hygienic. Add the circular knife grinder accessory to maintain optimal performance. This machine is all about fast, clean, and consistent output. Dwedpfx Ajzu Rfkelbjb Unique cutting principle Combination of circular knives and band knives Significantly improved yield Electrical panel and compressor with dryer are fully integrated Easy access for cleaning Manufacturer: Marel Model: CT 2630 Year: 2011 Fish size: 2-7 kg Capacity: Up to 20 fish/minute Electricity: 3x400V Power consumption: 4.0 kW Machine dimensions L x W x H: 2,000 x 850 x 1,650 mm Machine weight: 675 kg

Condition: used, Year of construction: 2010, functionality: unexamined, For sale: Conveyor belt Marel Salmon A/S, type PPI top Conveyor, year of manufacture: 2010. Upper belt width: 290 mm, lower belt width: 560 mm, length: 9.4 m. Distance between lower and upper belt: 20 cm. Price negotiable. Net price: 2,200 euros. Dedpfx Asyuvgzslbswb

Condition: excellent (used), Year of construction: 2009, Salmon Slicer Horizontal / Long Slice Make: Marel Model: HS240 Dedpfxszzdmbe Albewb 2009

Condition: used, Year of construction: 2014, Marel MS2730 Filleting Machine with Back Bone Trim High-performance automatic salmon filleting machine Available from August / September. This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018). Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor. Key Features - Automatic salmon filleting machine - Equipped with Back Bone Trim - High fillet yield and excellent cutting accuracy - Automatic adjustment to varying fish sizes - User-friendly touchscreen control - Hygienic stainless-steel construction - Easy access for cleaning and maintenance - Compact footprint - Annual maintenance carried out by Marel - Good working condition Technical Specifications - Manufacturer: Marel - Model: MS2730 - Capacity: Up to 25 fish per minute - Fish size: Approximately 1.5 – 8 kg - Power supply: 3 × 400 V + N + PE (50 Hz) - Power consumption: Approx. 5.5–7.0 kW (depending on configuration) Djdpfezl Sydex Albewb - Water consumption: Approx. 15 L/min - Compressed air: Approx. 230–250 L/min at 6–8 bar - Dimensions (L × W × H): Approx. 3,150 × 1,035 × 1,980 mm - Weight: Approx. 1,450 kg (configuration dependent) Condition The machine has been serviced annually by Marel and remains in good operational condition. It is still installed and can be inspected under power by appointment. Availability: August / September. For additional information, pricing, or to arrange an inspection, please contact us. * Manufacturer: Marel * Model: MS2730 * Fish size: Approximately1.5 – 8 kg * Power consumption: Approx.5.5–7.0 kW(depending on configuration) * Weight: Approx.1,450 kg(configuration dependent)

Condition: excellent (used), Year of construction: 2022, operating hours: 5,098 h, Baader 581 Pro Filleting Machine The BAADER 581 Pro is one of the latest innovations in the filleting section from BAADER. It represents probably the most powerful and advanced filleting machine in the world. These in-depth studies resulted in the development of the BAADER 581 Pro’s most innovative optional feature: the dynamic back knife. The optional dynamic back knife offers outstanding possibilities for increasing the yield of the fillet and makes BAADER 581 Pro a yield winner. Depending on the fish's anatomy, the knives are automatically adapting to the upper back area of every single salmonid leaving as little flesh on the frame as a hand filleter would. Very narrow in the tail section but opening up to the wider backbones in the neck area. The result changes the common understanding of yield expectations for machine filleting. The new layout of the BAADER 581 Pro has a 20% smaller footprint compared to its predecessor by streamlining the housing. The recently designed housing also reduces processing noise for a quieter production atmosphere. It features individual fish measurement, offering operational flexibility for a wide range of fish species and different kinds of conditions. Dedpszktd Ijfx Albjwb High flexibility to different species and conditions Adaptable recipe management system allows for changes during operation Individual fish measurement High operational flexibility for different fish species and conditions Optimal fillet quality Computer controlled active cutting tools Smooth surface as a result of reduced fillet stress during processing No gaping Working range without belly trim (approx.):  Salmon (HoG): 2 - 7 kg Sea Trout (HoG) : 1.8 - 5 kg Sea Trout (HoG): 1.- 4 kg * Working range with belly trim (approx.):  Salmon (HoG): 2 - 5.5 kg Sea Trout (HoG) : 1.8 - 5 kg Sea Trout (HoG): 1.- 4 kg * Other species on request, like: Wild caught coho (H&G): 2 - 4 kg Wild caught sockeye (H&G): 2 - 4 kg Manufacturer: Baader Model: 581 Pro Year: 2022 Production hours: 5.098 hours Capacity: Up to 25 fish/min. Species: Salmon / Coho / Sockeye / Trout / Tuna / Similar Power: 400V / 50Hz / 13kW Air: 6 bar / 50l/min. Machine dimensions LxWxH: 5.566x2.795x2.523 mm Machine weight: 3.200 kg.

Condition: used, Fish Filleting and Heading Machine Make: VMK Model: 18 + 181 With spare parts Dwedpfx Aozi Tl Nslbsb Working order, as back from factory

Condition: repair required (used), Marel trimming robot. Has a few parts missing so will be sold as is. Looks to be in very nice condition apart from the missing parts. Machine wasn’t built in 2013. Dedpow Rnz Ajfx Albswb

Condition: used, consisting of: Dwodpfxozzlgvs Albjb “Marel” Masterfill Type TA1516 all stainless steel overall dimensions (l x w x h) : ± 1.000 x 750 x 1.200 mm in very good condition in good working order + MasterSlice “Marel” Type TA 1511 dimensions (l x w x h) : ± 2.100 x 1.000 x 1.500 mm

Condition: used, Molding line for filled products such as cordon bleu (fresh weight 100gr) The fresh weight per portion is ± 100 grams. The main components are 48 grams of ground meat 10 grams of processed cheese 10 grams of sausage or ham the rest is breadcrumbs consisting of: “Risco Brevetti” vacuum filler Type RS303 (filler-grinder) with loader for Eurobins with meat grinder heat (Filler-Grinder), Type RS 70 BJ 2010 filler-grinder opening 2 filling strips on top of each other of 90 x 5 mm + MasterSlice “Marel - Stork” Type 1511 Slicer for sausage or ham bars caliber 50 mm + “Karl Schnell” vacuum filler Type 596 P 10 SE Used to fill the processed cheese linked to the Masterfill + “Marel” MasterFill Type MTFU Takes the processed cheese from the Karl schnell vacuum filler and portion it + “Marel” MasterFormer Type TA1521 Using virtually no pressure, the MasterFormer system produces high quality filled and unfilled products with a handmade look and retention of structure and texture of meat mass. The MasterSlice and MasterFill modules allow solid, liquid and paste fillings to be added to the meat mass in the MasterFormer supply line. The MasterFormer offers a wide variety of end product possibilities with minimal waste of ingredients and maximum flexibility, including cordon bleu or steak haché. Features : · Ultra low-pressure forming, to retain structure and texture of meat mass · Fully automatic production of filled and unfilled products, with a handmade look Dwedpfx Aozzkz Eolbjb · MasterSlice adds cut-to-measure slices of solid filling to the basic raw material · MasterFill is used to add liquid or paste fillings · Minimal waste of ingredients · End products can be packed directly onto trays or, alternatively, are ready for further processing · Easy to operate and clean in good condition in good working order The machine is fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: used, all stainless steel suitable for thermic oil heated (= 250kW) with lower and upper belt frying length 5.000 mm belt width 630 mm adjustable speed Dedpfxjzzcu Dj Albewb oil circulation pump suitable for fire protection electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 9.100 x 1.900 x 2.900 mm

Condition: used, mobile dimensions (l x w x h) : ± 900 x 900 x 1.600 mm Dodpfozzcl Ajx Albswb Autonomous operation (can be connected to almost all types of pre-duster)

Condition: used, all stainless steel suitable for thermic oil heated (583 kW) with lower and upper belt frying length 8.600 mm belt width 630 mm Dodpjzzb S Ijfx Albjwb adjustable speed frying time: 25-320 seconds oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 11.500 x 2.200 x 2.650 mm

Condition: excellent (used), Year of construction: 2021, Grader Dedpfx Aozzq Ifjlbjwb Make: Marel Model: CG600 Compact Grader 2021 6 Station Little use.

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Dwodpopcibmsfx Albeb

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Dwsdjq Nx Alepfx Albjb Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Treif Felix CE, including 2 grid sets, in very good condition!!! Djdpfx Aszyyd Tolbjwb All-in-one slicer, cube cutter, strip cutter, bacon slicer, dicer.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, GEARLESS FLEXOGRAPHIC PRINTING PRESS KOENIG & BAUER FLEXOTECNICA EVO XDN8 Dwjdpfx Ajzx Tuielbob Flexographic printing press with a central cylinder Gearless 8 colors Maximum printing width: 1000 mm Maximum material width: 1050 mm Minimum/maximum print repeat: 330/750 mm Fully automatic turret unwinder and rewinder Maximum coil diameter: 1000 mm Gas drying system BST 100% camera system Viscometers FIFE web guide Year 2019

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 Djdpequuv Iefx Albewb SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. S/N: 032M44045 Labelling speeds: 60 to 350 cpm USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump Dwsdpfx Ajzv Rnuslbob suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: reconditioned (used), MAREL + SCANVAEGT VÅGAR ID.NO. 1654 2x complete Multihead scales from Marel / Scanvaegt's associated platform, 14 bowls, conveyor belts, vibrator gutters, platform, distribution tools for packing in deep drawers, previously packed salami but suitable for many other things such as Vegetables, Cheese, Fish and more. Dwedpfx Aljgfvbqebjb

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Dwedpfx Alozuz H Ssbjb Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, MAREL Automatic Killer K-15 Automatic poultry slaughter system from the renowned Marel brand – an Automatic Killer device designed for efficient and humane slaughter in poultry processing plants. The offered device is a component of a slaughter line, ensuring precise and repeatable operation while maintaining the highest standards of animal welfare and production hygiene. The system is designed for continuous operation in high-capacity plants. Dwsdpsyzglcefx Albsb Key features and benefits: - High efficiency and operational reliability - Process automation – reduces manual labor - Precise operation for consistent process results - Stainless steel construction – easy to clean - Compliant with sanitary and industrial standards - Can be integrated with an existing MAREL processing line Technical condition: Used – very good – immediately ready for operation Technical data: - Manufacturer: Marel - Model: Automatic Killer K-15 - Type: 3768196 - Capacity: up to 15,000 bph - Year of production: 2011 Installation and commissioning support available. Please contact us for detailed information and to receive a customised quotation tailored to your facility’s requirements. We offer a wide range of related equipment. MAREL / STORK / STUNNER / AUTOMATIC KILLER / K-15

Condition: used, JONES SHIPMAN 1307 EIT CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1307 EIT CENTRE HEIGHT 185.0 mm MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM PLUS VARIABLE SPEED WORK HEAD INTERNAL SPINDLE. DOUBLE SWIVEL WHEEL HEAD. METRIC DIALS RANGE OF MAGNETIC CHUCKS PENDANT CONTROL HYDRAULIC PACK PAPER FILTRATION SYSTEM REBUILT BY ANDMAR Dwsdpfx Aoy Hi Epslbeb EXTENSIVE RAGE OF TOOLING AND ACCESSORIES HYDRAULIC PACK