Used Macsquant 16 Analyzer for sale (13,284)

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 40423, The MACSQuant Analyzer 16 is a benchtop, automated flow cytometer engineered for multi-parameter cell analysis, offering convenience, sensitivity, and flexibility for both research applications and advanced cell therapy workflows. As part of the MACSQuant product line, this model improves upon previous generations by delivering 16 optical parameters (i.e., multiple fluorescence detection channels) while maintaining a compact footprint and a high degree of automation. Typical applications include immunology, immunophenotyping, cell and gene therapy (CGT) analytics, quality control processes, and general cell biology research. Key Features & Capabilities Highlighted advantages and system features: Feature Description / Details Optics & Detection - Outfitted with three spatially separated lasers: 405 nm, 488 nm, and 640 nm. - Provides 16 detection/optical parameters (multiple fluorescence channels, plus scatter signals). Lhsdexg Ndiepfx Ab Aon - Signal detection covers FSC (forward scatter), SSC (side scatter), and multiple fluorescence channels (e.g., V1–V5, B1–B6, R1–R3), each equipped with optimized photomultiplier tubes (PMTs). Fluidics / Sample Handling - Minimum sample uptake: as little as 1 µL (recommended ~25 µL for precise volumetric counting). - Adjustable sample flow rates: 25, 50, or 100 µL/min, or automated regulation to achieve target event rates (e.g., 500, 1,000, or 2,000 events/second). - Maximum event rate: up to approximately 15,000 events/second (ALT mode). - Compatible with various sample vessels, including 1.5, 2, and 5 mL tubes, tube racks, and 96-well plates. Transition between tubes and plates is user-friendly. - Utilizes an automated robotic needle arm for sample aspiration, thorough mixing, and automated washing of both the injection port and needle before and after runs. Automation & Workflow - Full automation for maintenance routines, PMT gain calibration, fluorescence compensation, sample acquisition, and analysis. - "Express Modes" (pre-set protocols) and templates support reproducible sample acquisition and data processing workflows. - Harmonization features for cross-instrument and multi-site data alignment, promoting data standardization for multi-center studies. - Regulatory and compliance support: offers 21 CFR Part 11-compatible features (audit trail, user management, electronic signatures, and reporting), making it ideal for clinical and translational research labs. Sensitivity & Performance - High fluorescence sensitivity: e.g., for standard dyes — FITC < 110 MESF, PE < 75 MESF, APC < 100 MESF - High precision:

Condition: used, Thermo Fisher Scientific Optical Emission Spectrometer / Spark Spectrometer Thermo Scientific ARL 3460 Professional OES metal analysis system for the precise analysis of metallic materials For sale is a used optical emission spectrometer from the manufacturer Thermo Electron Corporation (now Thermo Fisher Scientific). The Thermo Scientific ARL 3460 is suitable for fast and highly precise analysis of metallic materials in laboratories, foundries, quality assurance, incoming goods inspection, as well as research and development. The system operates according to the principle of optical emission spectrometry (OES) and is supplied including an industrial PC, original software, and a USB license dongle. Technical data: Manufacturer: Thermo Electron Corporation Model: ARL 3460 Device type: Optical Emission Spectrometer (OES) Made in Switzerland Supply voltage: 230 V AC Mains frequency: 50 Hz Mains connection: 1 phase Power consumption: 3.5 kVA Software: Thermo WinOE Version 3.2.3 MP1 Gateway v1.0-90 ASLViewer v1.0-16 ASLEngine v1.2-1 Original USB license dongle included Measurement method: Optical Emission Spectrometry (OES) Spark excitation for material analysis Fast and highly precise metal analysis Analyzable elements (according to the installed spectrometer configuration): Copper (Cu) Chromium (Cr) Iron (Fe) Manganese (Mn) Uranium (U) Niobium (Nb) Titanium (Ti) Zirconium (Zr) Phosphorus (P) Sulfur (S) Boron (B) Arsenic (As) Tin (Sn) Carbon (C) Aluminum (Al) Calcium (Ca) Molybdenum (Mo) Equipment: Thermo Scientific ARL 3460 spectral analyzer Dell industrial PC Monitor Keyboard Mouse Original WinOE software Original USB license dongle SERCAL MP-2000 rare gas purifier Connection cables Service markings present Accessories as shown in the pictures Application areas: Material analysis Metal analysis Quality assurance Incoming goods inspection Foundries Steel mills Metal processing Testing laboratory Research and development Automotive Mechanical engineering Industry Dimensions (approx.): Width: 1,665 mm, Depth: 910 mm, Height: 1,190 mm Weight: approx. 450 kg Lhjdpozkuftofx Ab Aen Scope of delivery: Thermo Scientific ARL 3460 Dell industrial PC Monitor Keyboard Mouse Original WinOE software Original USB license dongle SERCAL MP-2000 rare gas purifier Connection cables Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear. Software starts correctly. Original USB license dongle included. Service and maintenance markings are present on the device. The table shown in the photos or other items not explicitly mentioned are not part of the sale. Loading by forklift is possible. Delivery by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2018, operating hours: 18,682 h, machine/vehicle number: PST43, Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature alarm limits, differential control, probe calibration, relay restart delay, alarm relay timing and keypad locking. Digital input functions include door-open monitoring and selectable automatic or manual alarm reset logic.Controller functions also include probe-failure relay logic and password-protected programming parameters. A timed restart caution label is fitted, indicating that the unit may switch on after a time delay.Production Line Integration CapabilitiesThis juice pasteurizer can be integrated into a hot-fill beverage production line as a thermal processing stage upstream of filling equipment. In a typical industrial packaging configuration, product is thermally treated before transfer to a suitable hot-fill system, with downstream handling, labeling and secondary packaging arranged according to the final container format.The 5000 LPH capacity makes the equipment relevant for beverage production environments requiring continuous juice pasteurization. Final integration should consider product piping, hygienic connections, buffer capacity, filling-line throughput and thermal process coordination.Machine Condition & Maintenance HistoryThe machine records 18,682 running working hours. It is a 2018 unit with identified HRS Process Systems Ltd. process assemblies and an ADVANCE temperature controller. Inspection of heat-transfer surfaces, seals, pumps, instrumentation, temperature probes, electrical circuits and control parameters is recommended as part of commissioning planning for second hand bottling equipment.Operational Performance & VersatilityDesigned specifically for juice processing, this hot fill pasteurizer supports the controlled heating stage needed in hot-fill beverage production. Thermal treatment equipment of this type is used to help maintain a stable pasteurization process before product transfer to the filling area.The listed construction materials include 316L / 316L SMLS and 304 / 316L ERW configurations, supporting use in hygienic product-processing environments. Temperature control, alarm limits and probe-related functions provide operational tools for monitoring the pasteurization process.Installation Requirements & Site Preparation... Lsds Adtqlspfx Ab Ajhn

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load Capacity Load capacity: 1,600 kg Mast Mast type: Duplex mast with full free lift Lifting height: 3,140 mm Free lift: available Forks Fork length: 1,200 mm Hydraulics 3rd hydraulic valve: available Lhodpfxsz R Dyfo Ab Ajn 4th auxiliary valve: available, prepared for fork positioner Side shifter: available Electric Drive Drive type: Electric Battery: 48 V, 6 PzS, 750 Ah Battery year of manufacture: 2021 Battery voltage in idle state: 50.2 V MACHINE DETAILS General Manufacturer: Linde Type: E16L Year of manufacture: 2020 Operating hours according to display: 14,963 h Own weight: 3,200 kg Dimensions Overall length: 3,300 mm Overall width: 1,100 mm Overall height: 2,100 mm Inspections and Service Service valid until: 09/2027 UVV (German accident prevention regulation) valid until: 09/2027 Previous owner: former Linde full-service unit EQUIPMENT Side shifter Semi-cabin Windshield with wiper LED work light, front LED work light, rear Comfort seat with lumbar support Seat heating Battery charger 4850, year of manufacture 2026 All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 183

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2016-08-30, total length: 2,100 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 2,500 kg, CONGDA 16/16/6 Counter-Pressure Filling Machine – up to 3,500 bottles/hour For sale: a CONGDA 16/16/6 bottle filling machine, manufactured in 2016. The machine underwent a complete overhaul in April 2026, which included replacing bearings, seals, springs, and other wear parts. In addition, the machine has been technically improved in several areas since it was put into operation. During this process, various original components were replaced with high-quality parts from European manufacturers. Technical specifications - Manufacturer: CGET (China) - Year of manufacture: 2016 - Configuration: 16/16/6 (rinsing / filling / capping) - Filling system: Counter-pressure filler - Filling capacity: Up to 3,500 bottles per hour, depending on factors such as carbon dioxide content and temperature - Bottle format: Set for 33 cl Longneck bottles - Weight: Approximately 2,500 kg - Documentation: Technical documentation available Complete overhaul in April 2026 Lhodpez Nlcxsfx Ab Aon In April 2026, the machine underwent an extensive technical overhaul. During this overhaul, the following parts, among others, were replaced: - Bearings - Seals - Springs - Various other wear parts Additional technical improvements Since it was put into operation, the machine has been further optimized in several areas. Various original components have been replaced with parts from European manufacturers. The most important improvements are: - Replacement of the vacuum pump - Replacement of all sensors - Installation of a digital pressure gauge on the filling bowl - Replacement of various parts of the rinser - Replacement of the capping dies - Various other technical improvements As a result of these modifications, the machine has been technically improved in several key areas compared to its original configuration. Additional items included The machine comes with a comprehensive package of extra parts, including: - Various chain conveyor parts - Large quantity of spare parts - Extra seals - Springs - Filling tubes - Various other technical parts and wear parts Asking price: €34,900,- excluding VAT Location: Breda More information, photos, and videos are available upon request.

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Sheet metal width: 2,000 mm Sheet metal thickness for St 42: 16 mm Passage width: 2,250 mm Overhang: 600 mm Knife and cutting Knife length: 2,005 mm Cutting gap adjustment: 0.05–0.95 mm Cutting angle: 1° 40′ Clamping beam: 10 pcs. Back gauge Gauge length: 1,000 mm Back gauge adjustment: 10–1,000 mm Work table Table size: 2,500 × 700 mm Table height above floor: 800 mm Hydraulics and Electrics Oil volume: 900 l Operating voltage: 380 V Machine data Machine weight: approx. 10 t Space requirement: approx. 3 × 2.3 × 2.3 m EQUIPMENT Foot switch Lodpoz S Ng Hofx Ab Aehn Supports Spare knife

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Lodpfx Absz Trrhs Ajhn Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Stock number: 1029

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, ABB Robotics IRB 2400/16 IRC5 M2004 robot Controller: IRC5 M2004 Number of axes: 6 Max. payload: 16 kg Max. working range: 1550 mm Year of manufacture: 12/2007 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Lhjdpez Rlggefx Ab Ajn Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Ex works / free loading. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify delivery address.

Condition: good (used), Year of construction: 1989, turning height: 1,275 mm, workpiece weight (max.): 16,000 kg, turning diameter: 1,900 mm, faceplate diameter: 1,600 mm, workpiece diameter (max.): 1,800 mm, overall weight: 27,000 kg, Max turning diameter 1900/1800 mm (facing/peripheral) Lhodpfx Abj Ad Hy Tj Aen

Condition: used, Year of construction: 2012, type of input current: three-phase, input voltage: 400 V, total width: 1,150 mm, total length: 2,150 mm, total height: 4,300 mm, filter area: 286 m², suction capacity: 16,000 m³/h, input frequency: 50 Hz, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, under-pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFO4-16 Year of manufacture: 2012 Cartridge filter inserts, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 22 kW Ljdpsz Nx S Tofx Ab Ashn Fan model: ART 632/N4 Capacity: 16,000 m3/h Noise silencer included. We also offer new filter inserts on request, tailored to the intended use of the equipment. Stock number: 0018

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm Lhodpj Aa Iqxjfx Ab Aon L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, operating hours: 3,625 h, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 1,600 mm, No minimum price – guaranteed sale to the highest bidder! Ledpsz Ni S Djfx Ab Aohn TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 13,600 x 2,450 x 2,450 mm Weight: 7,200 kg Transport packages: 8 pcs. Operating hours: 3,625 h

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, ABB Robotics IRB 2400/16 S4C M98 robot Controller: S4C M98 Number of axes: 6 Max. payload: 16 kg Max. working range: 1550 mm Year of manufacture: 2000 Scope of delivery: Robot, controller, cables, teach panel, wiring diagrams Used item – shows normal signs of wear. Further details, article numbers and pictures available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Ledpfx Abez Rk Sbs Aohn Free loading / ex works. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address.

Condition: good (used), functionality: fully functional, 4 x Wagner ZA 16 1 x Wagner MSD 20 19 mm shank, suitable for, e.g., Revolver Traub TD or Index A 25. List of thread inserts: M 0.8: 2 sets M 1.0: 7 sets M 1.25: 20 sets + 1 set on a Wagner head M 1.5: 7 sets + 2 sets on a Wagner head M 1.75: 5 sets Lhedpfjz H H A Tex Ab Ajn In total, 44 sets of thread inserts. See also the photos. The heads can be inspected at our warehouse.

Condition: used, Year of construction: 1994, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Sheet metal width: 3,000 mm Sheet metal thickness: 16 mm Frame width: 3,200 mm Overhang: 310 mm Stroke: 300 mm Work table Table width: 820 mm Table height above floor: 1,215 mm Clamping and cutting Number of clamps: 12 pcs. Cutting angle: 0.5–2.5° Cutting angle adjustment: 1–2.5° Cutting gap adjustment: manual, via table adjustment Back gauge Back gauge: 0–1,000 mm Adjustment: motorized Positioning: digital Performance data Total power consumption: 30 kW Machine weight: approx. 19 t Dimensions Space requirement: approx. 3.8 × 2.65 × 2.85 m Overhaul and safety Lsdpfx Abez S Nkxj Ashn Overhaul: 2010 Safety features: safety light curtain EQUIPMENT Motorized adjustable back gauge Digitally positionable back gauge Electrically adjustable cutting angle Safety light curtain Loading/unloading table with conveyor belt

Condition: used, Kuka robot KR 16 R1610-2 / SEL Lodpfxj Adzghe Ab Ashn KRC 4 industrial robot Without cable Without panel

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over bed Ø16 mm mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2045 x 900 x 1685 m Ljdpeztfw Esfx Ab Aehn

Condition: good (used), Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Ledpfx Abs Aax Unj Ashn Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 Lhjdeulpmzspfx Ab Aen 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MMFE 422132/35, Müller Martini 3631 CB-16, manufactured in 2001, compensating collator and stacker designed for the automatic stacking of bound books and printed materials. Maximum size: 450 x 340 mm (varies by model version, up to 470 x 320 mm) Minimum size: 140 x 100 mm Product thickness: 3–70 mm Lhjdpfx Abez Dftfo Ajn Maximum speed: Up to 18,000 pieces per hour The machine is currently in production. The CPU battery needs to be replaced. After purchase, the machine will be dismantled and packed for delivery. The machine will be taken out of production in early 2027. Do not hesitate to contact us for more information.

Year of construction: 2007, condition: like new (used), 457mm wide stainless steel belt with overlay Ashworth Omni grid Belt 95mm Product gap 155 Tier pitch Main drive - 4Kw 1600 diameter drum Goedhart Freon evaporator full cascading refrigeration pack included in a container Ledezuzvgjpfx Ab Ajhn More photos and spec upon request

Condition: used, functionality: fully functional, Year of construction: 1984, Max. bending length: 3150 mm; Max. sheet thickness: 16 mm; Min. inner diameter of rolled tube: 550 mm; Rolling speed: 7 mm/min; Roll adjustment speed: 2x22 mm/min; Machine dimensions (L x W x H): 7900x1930x2500 mm; Machine weight: 46,800 kg. Lodpexxvlkofx Ab Ajhn

Condition: refurbished (used), functionality: fully functional, Year of construction: 1996, operating hours: 7,550 h, load capacity: 1,600 kg, fuel type: diesel, mast type: triplex, total height: 2,050 mm, Equipment: 3rd hydraulic function, pallet forks, sideshift, Load capacity: 1600 kg Linde H 16 Diesel Mast type: Triplex free-lift Year of manufacture: 1996 Operating hours: 7550 Lifting height: approx. 4650 mm Overall height: approx. 2120 mm 3rd valve Side shifter Gross price: €8925, Net price: €7500 Are you looking for a different forklift or high-lift pallet truck? LPG, electric, or diesel? Ljdpfo Aa Tf Ijx Ab Aehn Contact us, and we will find the right vehicle for you. Subject to errors and prior sale. Sale only to commercial customers, without warranty.

Condition: excellent (used), Year of construction: 2018, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, overall weight: 8,000 kg, For sale on behalf of a customer is a ZEISS PRO T advance 16/15 3D coordinate measuring machine. The machine is currently fully operational and connected to the power supply. Technical data and features: - Year of manufacture: 2018 - Operating hours: approx. 13,000 - Control system: ZEISS C99N - Measuring range: X 3,200 × Y 1,600 × Z 1,500 mm - Rotary-swivel joint: ZEISS RDS-C6 Lhsdpoz Rmkysfx Ab Aen - 3D measuring head: RST-P - Ceramic probe ball, identification C02258-d - RDS probe changing magazine - 36-piece RST probe kit - Measuring software: ZEISS Caligo - PC workstation: HP Z440 G3 with Intel Xeon E5-1620 v4, 32 GB RAM and NVIDIA Quadro K2200 - Measuring table: solid special cast iron table, flatness according to DIN 876/II - Last DAkkS calibration: 02/26

Condition: excellent (used), Year of construction: 2005, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 (KR16-2 Foundry option is also available) Condition: Used & Tested Year: 2005 (more options are also available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Lodpfx Abow Idvwj Aehn Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)