Used Müller Sdz 250/200.3. for sale (11,472)

Condition: used, Year of construction: 1980, Press force: 250 t Stroke: 250 mm Frame width: 1125 mm Side frame opening: 700 mm Shut height (stroke up): 800 mm Table area: 1100 x 900 mm Cushion force in table: 63 t Cushion stroke in table: 100 mm Cushion area in table: 700 x 400 mm Table height above floor: 960 mm Csdpfxjzyl Haj Albsrg

Condition: used, Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Crsdpfx Alszwgpqsbog Weight: approx 3,5 T

Year of construction: 2003, condition: used, machine/vehicle number: M00543, Rated force: 2,500 kN, rated power: 18.5 kW, machine weight: 25,000 kg, stroke rates in continuous operation: 19-57/min, max. stroke rates in single-stroke operation: 35/min, dwell time: 0.245 s, stroke length: 19-250 mm, max. installation space: approx. 480 mm, table size: approx. 900x1,200 mm, upstream light curtain, two-hand operation, separate control panel, control unit BEUTLER DATAPLUS 200. Crjdpszqzc Sofx Albsg

Condition: used, Manufacturer: Müller Stanz- und Umformtechnik GmbH & Co. KG Type: PMLE250x1700 R-HK Machine No.: A05036-02 Year of manufacture: 2006 Machine type: Eccentric press Press force: 2500 kN Press force: 250 t Stroke rate: 20–120 min⁻¹ Stroke: 25–125 mm Ram adjustment: 100 mm Voltage: 400 V Motor power: 55 kW Connected power: 100 kW Credpfx Aljzrz Ecsbog Weight: 47,000 kg Draw cushion: No Condition: Used Machine is leaking hydraulic oil Several leaks are present in the hydraulic system Tension pins for the ram adjustment have been deactivated due to the hydraulic leaks Sold without conveyor system Videos available upon request Location: Freiburg

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Cjdpezrpthjfx Alborg Oil volume 730 l Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop No foundation pit necessary

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Cjdpjzqzcrsfx Albsrg

Condition: good (used), Manufacturer: MÜLLER Tip: SDZ 63t Table surface: 620x500mm Pressure: 63 t Crjdpen D Eiaofx Albeg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, distance between stands: 1,350 mm, installation height: 600 mm, TECHNICAL DETAILS Press force: 250 t Frame width: 1,350 mm Stroke: 400 mm Installation height: 600 mm Table dimensions: 1,250 x 800 mm Side clearance: 640 mm Table height: 800 mm MACHINE DETAILS Dimensions & Weight Csdpjzk E A Aofx Albjrg Approximate space requirement: 3,600 x 2,800 x 5,700 mm Approximate machine weight: 36,000 kg

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Crjdpfx Asu Dxb Tjlbog Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: excellent (used), load capacity: 250 kg, Equipment: foot remote control, 250 kg load capacity welding positioner, 2 identical units available with 380mm or 400mm chuck, top condition electrically tiltable very robust Continuously variable speed from 0.15 to 2.0 rpm Current transmission 300 A Turntable diameter approx. 500mm Tilting up to 135° Csdpfx Ajwtrtcelbjrg Height (horizontal) approx. 900mm, tilted to center approx. 800mm Length 950 mm x width 600 mm

Condition: used, first registration: 06/2011, total width: 25,500 mm,

Condition: good (used), Year of construction: 2012, Built in 2012 Size max 330 x 250 mm Size trimmed max 330 x 250 mm min 200 x 148 mm Size trimmed without lap max 340 x 260 mm booklet thickness 4-6 mm Mechanical Speed max 22.000 t/h Equipment crane system • 2 Bundle clamps gathering chain & feeders • 8 stations gathering chain • 6 feeders 0416.0440 • 6 streamfeeders 3738 with extensions • 1 Card gluer 423 • 1 Semko • 3 ELTEX static devices stitching unit 410.0425 • 2 stitching heads three knife trimmer • three knife trimmer 304 knives • 2 sets of knives controls • automatic selfajusting calipers ASAC • signature reading system ASIR • automatic make ready system Amrys Cedpfxetryhfo Albjrg Pick up station with chain and delivery station Inserter • Müller Martini Integro • 4 stations • reject unit • transfer unit Addressing unit • Sitma 930-A Stacker • Müller Martini Robusto 451 Electrostatic Blocker • Müller Martini 457 Condition Very good working condition can been tested

Condition: used, Available quantity: 4 units Manufacturer: MÜLLER Type: ZE 800-35.1.1 Year of manufacture: 1969 General overhaul: 2008 Pressing force: 8,000 kN Pulling force, press ram: 8,000 kN Ram stroke: 1,100 mm Ram surface area: 3,500 × 2,200 mm Max. dimension at the hydraulic clamps: 2,040 mm Hydraulic table cushion, one-piece: Displacement force: 250 – 2,500 kN Crjdpfxszw Nq Do Albog Stroke: 85 – 300 mm Cushion surface area: 2,700 × 1,500 mm Hydraulic ram cushion, unregulated: Displacement force: 100 – 1,000 kN Stroke: 150 mm Cushion surface area: 2,400 × 1,500 mm Distance, table – ram TDC: 2,200 mm Distance, table – ram BDC: 1,100 mm Table clamping surface: 3,500 × 2,200 mm Clearance between guides: 3,550 mm Max. tool weight: 32 t Equipment: Punch impact damper Speeds: Rapid descent speed: max. 500 mm/s, unregulated Working speed: 5 – 140 mm/s Return speed: 30 – 420 mm/s Operating modes, table cushion: Return without locking, followed by ejection Return with locking and delayed ejection Operation with the pull cushion deactivated is possible Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank Credpox Ug Dsfx Albeg

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, MULLER MARTINI PERFECT LINE MACHINE LOT INCLUDES: PERFECT BINDER ROTORBINDER 10 CLAMPS (with extra stop system) GATHERING MACHINE WITH 12 STATIONS, MODELS 201 AND 2 (manual) TRANSFER SYSTEM TO ROTORBINDER Credpszdyx Ssfx Albjg THREE-KNIFE TRIMMER 3670, AUTOMATIC, WITH CASSETTE THE PRICE INCLUDES DISMANTLING AND LOADING ONTO A TRUCK OR CONTAINER.

Condition: used, MULLER 250t PRESSURE: 250t STROKE: 550mm Credperfxhkefx Albsg TABLE DIMENSIONS: 2500x1400mm

Condition: used, empty load weight: 3,260 kg, maximum load weight: 7,240 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2008, loading space length: 7,100 mm, loading space width: 2,470 mm, loading space height: 2,600 mm, total length: 9,100 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245/70 R 19,5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, ABS (anti-lock braking system), air suspension, 2 axles, BPW axles, tandem axle, curtain, lashing points, lifting and lowering mechanism, through-loading system, height-adjustable drawbar. Body: through-loading, portal doors at the front, sliding tarpaulin, rear tailgate with roll-up cover, drum brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Csdpfei Rpxajx Alberg

Year of construction: 2005, condition: used, Serial number: MMFE 1015393 Refurbished: 2021 by Muller Martini – 8000 speed Manual feed station Number of stations: 12 Sorting machine: ASAC auto set up Type: 3693/ 24” Self-adjusting collet control Roll recognition system: ASIR Binding machine type: 3028 Number of binding machine clamps: 31 Touchscreen control Cjdpfxjzuw Hnj Alborg Trimming station 2 separate pre-trimming stations Hot-melt spine gluing machine with freestanding preheater Hot-melt side gluing unit with freestanding preheater PUR gluing system with preheater 2 clamping stations Conveyor belt system for connection Müller Martini Merit S three-blade cutter with spare blades Overall dimensions of the setup: approx. 7,000/11,000 x 32,000 x 2,500 mm Notes: Must be professionally disassembled and loaded by the buyer Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: like new (used), Year of construction: 2020, machine/vehicle number: CL5058002, functionality: fully functional, operating hours: 9,000 h, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, oil tank capacity: 800 l, overall weight: 800 kg, Equipment: CE marking, Specifications of the MULLER Combiloop CL5-800 150 high-pressure unit and filtration system, 800L/27L, 150 bars: - 800L capacity with level sensor - Centrifugal pump for supplying dirty fluid - Self-adjusting HP Eco+ pump, 150 bar/27L/min (5.5kW) - 8 controllable outputs, including one output for counter-spindle rinsing - 1 low-pressure pump with constant flow rate, 100L/min, 5 bar (1.2kW) - 1 low-pressure pump with constant flow rate, 80L/min, 3.5 bar (1.9kW) - Automatic 40μ filtration with automatic control and clogging detection - Complete high and low-pressure filtration - Pressure control for the part program Crsdezhi Nnepfx Albjg - Whole oil (recommended viscosity for machining: 15-22 mm²/s; for deep drilling: 5-8 mm²/s) - Includes: EURO COLD RCFO 95t cooling unit - Excellent condition (very little use)

Condition: used, empty load weight: 3,750 kg, maximum load weight: 14,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1993, total length: 9,300 mm, total width: 2,450 mm, total height: 1,500 mm, suspension: steel, tire size: 385 / 65 R 22,5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, leaf spring suspension, ABS (anti-lock braking system), side aluminum fender. Body: 6.0 to 7.0m container, mechanical locking. Crjdpoi Rmktofx Albeg ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Year of construction: 2007, condition: used, Dust jacketing machine Müller Martini Vesta (A710) Year: 2007 Cedpfxjzxztyj Albjrg The jacketing machine completes the external appearance of the books by precisely and tightly wrapping the jackets and folding in the flaps. Description: - Infeed conveyor - Automatic jacket feeder - Scoring station - Book opening station - Case separation station - Case closing station - Straight delivery - Lay down device: A 440 NE - Excluding pump Max. mechanical speed: up to 3.900 cycles/h Book block format (max): 305 x 390 x 80 mm Book block format (min): 95 x 125 x 10 mm Book thickness (min): 8 mm Jacket size (max): 900 x 390 mm Jacket size (min): 295 x 125 mm Flap width (max): 150 mm Flap width (min): 50 mm

Year of construction: 2014, condition: used, functionality: fully functional, We offer this used trade fair stand made of stainless steel, manufactured in 2014. Manufacturer: IMW - Wolfgang Müller Model: MesseStand Year of manufacture: 2014 Condition: used Machine type: Stainless steel trade fair stand Used trade fair stand, also suitable for use as a pavilion, sales stand, indoor stand, room divider, or sales counter. As shown in the parts drawing, it includes transport boxes and lighting, but excludes furniture, side panels (banners), a TV, and inventory (available upon request). This trade fair stand has only been used three times. Stainless steel with component elements painted in RAL 9005 and blue acrylic glass panels, size 5 m x 4 m, height 3 m. The trade fair stand is disassembled into 4 high-quality wooden transport boxes, each measuring 3.50 x 1.20 x 1.20 m. Crjdpfjyvr I Sox Albog If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2012, functionality: fully functional, MBM ASAS ME Pump cleaning system for Abrasve Waterjet machines Cedpfx Alszh U Nasberg Used - construction Year 2012

Condition: used, Year of construction: 2003, Format: 390 x 285 mm Codpjzphl Rjfx Alborg Equipment: Book stacker Book Format Dimensions (Height x Width) Minimum format: 115 x 100 mm (down to 115 x 70 mm with optional small-format modifications) Maximum format: 390 x 285 mm (up to 390 x 310 mm with specific produ Book Thickness Minimum thickness: 5 mm Maximum thickness: 90 mm Stacking and Pile Height Maximum stack / pile height: 340 mm Operational Performance Mechanical capacity: Up to 3,900 cycles per hour (or roughly 65 cycles per minute) Infeed and Rotation: Features a built-in turning device capable of rotating the blocks gently

Condition: new, functionality: fully functional, empty load weight: 300 kg, maximum load weight: 300 kg, Year of construction: 2025, operating hours: 25 h, Motor: 3kW. Lassú fordulat , fordulat: 200f/perc Bedobó: 400x400mm, Codpozay A Rofx Albjrg