Used Mühlböck Mb 4000 for sale (5,545)

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Bwodpfx Aoy Uydlslbjt

Condition: ready for operation (used), functionality: fully functional, power: 228 kW (309.99 HP), fuel type: diesel, axle configuration: 4x4, fuel: diesel, From our immediately available stock of used vehicles, we offer you: TLF 4000 all-wheel drive on a rugged MB 1831 AK 4x4 all-wheel drive chassis Chassis: • Mercedes Benz MB 1831 AK 4x4 with 310 hp (230 kW) • Twin tires on the rear axle for high driving stability • rear tire chains • Year of manufacture 1996 • GVWR 17,000 kg • Mileage approx. 22,500 km Bjdozi Ucpspfx Albowt Cab: • standard long crew cab (1:2) in RAL 3024 (daylight fluorescent red) • storage compartments behind the seats Superstructure: • high-quality Ziegler superstructure in RAL 3024 (daylight fluorescent red) • 2 flexible and spacious equipment compartments per side of the vehicle • fold-out steps for each side equipment compartment • mountings for standard equipment and space for individual additional equipment • walkable, non-slip vehicle roof Vehicle pump/fire extinguishing agent tank: • Ziegler fire extinguishing centrifugal pump • Output of more than 2,400/min at 8 bar • Built-in foam mixing system • Water tank 5,000 l and foam tank 500 l • Rear flap as protection against freezing in the equipment/pump compartment Firefighting equipment: • Quick attack system with 50 m kink-resistant hose and electric hose reel • Foam/water monitor on the vehicle roof Safety and lighting • 2 blue warning lights on the cab/2 LED front flashing lights • Additional blue light elements on the superstructure • pneumatic special signal system • Public address system • Rear warning device • Hygiene board available on request We would be happy to provide you with a detailed offer and show you the vehicle in detail at our location in Berlin.

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, torque: 163 Nm, coolant supply: 20 bar, nominal power (apparent): 30 kVA, number of spindles: 48, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, table load: 400 kg, tool diameter: 70 mm, tool length: 300 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: CNC OSP P 200 Bsdpjuw Sq Uefx Albswt Chip conveyor 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Cooling through spindle 20 Bar Presetting on board table Shower work area washing system P.S. The machine has always worked in full oil Teflon material

Year of construction: 2015, condition: ready for operation (used), A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible. Bwodsw Azu Ijpfx Albjt

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 554 mm turning dia. over face-slide: 370 mm Bedpfx Aev Azdwolbjwt turning length: 1000 mm centre distance: 1100 mm control: Fanuc 210i longitudinal traverse (z-axis): 1000 mm Transversal stroke (x-axis): 290 mm revolution per minute: 16 - 1800 U/min spindle stroke: 178 mm feed:: 10 m/min. spindle passage: 104 mm spindle nose: D1 - 11 tailstock taper ISO: 6 MT spindle drive: 11/7,5 kW connection voltage: 380 V electrics - voltage/frequency: 3 Ph / 400 V / 50 Hz V/Hz total power requirement: 11 kW Weight approx.: 4,0 t dimension machine xH: 3,3 x 1,8 x 1,7 m

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, Bwsdjwgm Ibepfx Albot special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Standard equipment: 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments air nozzle Technical data: X-axis stroke 3000 mm / 4000 mm Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (blade) Working pressure: 7bar Weight: 2500kg

Condition: used, Year of construction: 2013, Overview  This brewhouse system with malt mill and plate heat exchanger was manufactured in 2013 by Spanish company Slowbeer. The system consists of a 2‑vessel brewhouse (mash tun and boil kettle), a malt mill, and a plate heat exchanger, designed for complete brewing processes including mashing, boiling, and whirlpool. Technical data  - Capacity: 250 liters per batch - Application: Brewing - Configuration: 2-vessel brewhouse (mash tun + boil kettle), complete brewing process (mashing, boiling, whirlpool) - Heating system: Electric - Temperature control: Automatic - Safety system: Thermal safety alarm - Cooling: Plate heat exchanger - Electrical supply: 400 V, three-phase Bwedpjyw Abfjfx Albst - Installed power: 15 kW Scope of Delivery  - Brewhouse (2 vessels) | Not provided | MB 250 E | 2013 | Mash tun and boil kettle, electric heating, automatic temperature control - Plate heat exchanger | Sondex | S4A-IG16 | 2013 | Transmission surface: 0.63 m², Design pressure: 10 barg, Volume: 1.5 L, Design temperature: 0 – 100 °C - Malt mill | Sommer | Piccolo 11S | 2013 | Capacity 100–150 kg/h

Condition: used, Year of construction: 2012, Overview  This brewhouse and utilities package was manufactured between 2001 and 2023 by European manufacturers including Slowbeer, GG-Technik, Lavor, Sommer, Quantor and others. The package centers around a 500 L brewhouse and includes steam generation, milling, cooling, compressed air and transfer pumps. Personal inspection is possible, Technical data  - Brewhouse capacity: 500 L - Configuration: 3 kettles + hot water tank + cold water tank + boiler - Steam heated Bjdpfx Aljyg R Dlsbowt - Cooling capacity: 35.8 kW Scope of Delivery  - Brewhouse | Slowbeer | MB-500MAN | 2012 | 500 L, incl. tanks & boiler - Steam Generator | GG-Technik | TD9 | 2016 | 5 kW - Steam Generator | Lavor | GV Vesuvio | 2014 | 18 kW, serviced 2025 - Malt Mill | Sommer | Piccolo 11 S | 2012 | Grain mill - Cooling Unit | Quantor | Q352RHQ | 2021 | 35.8 kW - Air Tank | Fiaseis | Coinox | 2023 | 270 L, stainless steel - Compressor | CompAir | WinVOM L15 7.5 | 2001 | — - Transfer Pump (2x) | Ebara | CDXM-B120-20 | — | Stainless steel - Air Dryer | — | E2000 | 2001 | Air drying unit

Condition: new, table diameter 500 mm table load 300 horizontal kg table load 150 vertikal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Features: - The table can be tilted and locked at angles ranging from 0° to 90° - Manual tilting - Start/stop via a foot switch that can be used from any location - Selectable rotation direction: clockwise/counterclockwise - Rotation time adjustable - Welding machine controlled via control unit - 350-amp ground connection Scope of Delivery: Bwsdoxabl Sjpfx Albet - Control unit (integrated) - Foot switch THE ROTARY TABLE HOUSING MUST BE CONNECTED DIRECTLY TO THE BUILDING GROUND! CAUTION!! Vertical load limit: 150 kg only

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm Bedpfx Aloxaatnebewt total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: good (used), Technical specifications for the pallet racking system: Racking system: Lücht & Palm Type: MB Note: Due to the hot-dip galvanized surface, the racks are suitable for outdoor use. The scope of delivery includes: 16x pallet racking uprights, used Material color: hot-dip galvanized Bwedpfx Aeult Szelbst Frame profile dimensions: U 120 x 50 x 5 mm Includes cross and diagonal braces, Base plates The uprights are pre-assembled (welded framework) 4,000 mm high 900 mm deep 52x pallet racking beams, used Material color: hot-dip galvanized Profile: IPE 120 x 64 mm Clear span: 5,015 mm Maximum load per pair of beams: 1,500 kg, with evenly distributed load 16x racking connectors, used Material color: hot-dip galvanized Profile: L 40 x 40 x 4 mm Clear span: 200 mm 64x bolt anchors, new Manufacturer: Hilti Type: HST2RM12x105/10 Design: Stainless steel 32x leveling plates, used Design: galvanized For leveling the racking uprights that are installed on uneven ground 01x load sign With information on bay and shelf loads, Manufacturer and order number Dimensions: 420 x 297 x 3 mm Including mounting hardware Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, We offer you a new pallet racking crossbar for sale here. Thanks to the hot-dip galvanized surface, these crossbars are suitable for outdoor use. Technical data for the pallet racking crossbar: Racking system: Lücht & Palm Type: MB Included in the scope of delivery: 01x Pallet racking crossbar, new Material color: hot-dip galvanized IPE profile: 120 x 60 mm Bjdpshg Tkksfx Albewt Design: Head crossbar Agraffe: 2 HK (hooks) Clear width: 1,800 mm Maximum load per pair of crossbars: 3,600 kg, with evenly distributed load 1x Set HV fitting set EN14399-4 - EN14399-6 10.9 hexagon head bolt with nut and washer for HV connection Material color: hot-dip galvanized These crossbars have an upstand for the placement of shelf grids, which is welded on. (Height: 40 mm / Material thickness: 4 mm)

Condition: excellent (used), Year of construction: 2018, Technical equipment of an industrial wood drying plant for sale For sale is the technical interior equipment of an industrial wood drying plant. The technical components are being sold without the chamber building or structural shell. Equipment / Scope of supply: * 16 measuring units * 12 fans/blowers with heat exchangers * Fan diameter: approx. 2.60 m * Heat exchanger dimensions: approx. 1.35 m width × 3.10 m height * 24 fan motors, each with 4 kW power * Total installed motor power of the fans: 96 kW * Complete control and regulation technology * Control computer with Viso+ * Supply and exhaust air technology Bwodpezwb Dvofx Albet * Other technical components belonging to the drying plant The equipment comes from a professional wood drying plant and is suitable for reuse, expansion, or modernization of existing drying chambers, as well as for the construction of new drying chamber systems. The technical drying equipment, including fan, heat exchanger, exhaust air, and control technology, is being sold – without the chamber building.

Condition: used, machine/vehicle number: 008710, Max. machining width: 1300 mm Working Table: Fixed pass height Vacuum feed belt: yes Bwjdpfx Alsztat Usbst No. Operating units: 3 Nr

Condition: used, Year of construction: 2014, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A Bedpsxrb Rfjfx Albewt - Machine weight: approx. 2600 kg

Condition: excellent (used), GRANULATE DUST REMOVAL We have 5 units available from a company liquidation. Bsdpjy N R Nbofx Albewt Granulate dust removal machines reliably eliminate quality risks such as streaks and cloud formation on visible surfaces. The granulate dust remover efficiently removes fine dust and ensures clean, high-quality plastic granulate. This reduces rejects, prevents production disruptions, and ensures consistently high product quality. Ideally, I would prefer if you already had such a device in use, as I only deal with the elimination of injection molding defects and am not familiar with the machines themselves.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, conveyor belt length: 6,000 mm, conveyor belt width: 2,000 mm, Manufacturer: MB Conveyors Type: PA ALL Year of manufacture: 2018 Length: 600 cm Bedpfxjwfym Io Albjwt Width: 200 cm Conveyor belt in like-new condition! PRICE REDUCTION FROM 3250 TO 2900 EUR!!!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, MB Conveyors N_CPR (2006) - Bwodpfxszhukde Albjt Dimensions (m): 2,2x0,6x1,5 (LxWxH)

Condition: good (used), Year of construction: 2011, conveyor belt length: 3,100 mm, conveyor belt width: 900 mm, discharge height: 1,000 mm, Equipment: documentation/manual, type plate available, MB Conveyors PA ALL (2011) L=310cm W=90cm Bwedpfx Aoyf Ndzjlbot H=100cm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,600 mm, conveyor belt width: 600 mm, discharge height: 1,000 mm, Equipment: documentation/manual, type plate available, L=360cm Bodsyf Nk Iepfx Albjwt W=60cm H=100cm

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, MB Conveyors PA ALL Ligth conveyor (2015) L=205cm Bedpoyf Nacsfx Albswt W=50cm H=110cm(adjustable)

Condition: new, Number of sanding units 8 St. sanding width 25-240 mm Sanding height max. 15-140 mm B ROBA Fentech; Fully automatic sanding machine Bsdezqvn Aopfx Albowt Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine sanding of wood - Sanding after impregnation - Intermediate lacquer sanding Advantages of the ROBA Fentech system: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm diameter sanding tools optimize sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a straight-through machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design - Freely selectable abrasive configuration from the MB Flex system. Brief overview of technical details (detailed description available upon request!): Workpiece length: max. unlimited, min. approx. 250 mm Workpiece width: 25–240 mm Workpiece height: 15–140 mm - Automatic, scanner-based workpiece detection at the machine infeed - 2.0 m infeed table - Driven vacuum transport system - 1x twin-spindle unit for right-side processing - 1x twin-spindle unit for left-side processing - 1x twin-spindle unit for processing from below - 1x swiveling twin-spindle unit for processing from above - 2.0 m outfeed table - Initial set of abrasives - Roba Fentech HMI (9" display, 400x400 housing, Siemens HMI) - Siemens control system - Electrical components: Klöckner Möller - Geared motor: Getriebebau Nord - Frequency converter: Schneider Electric - CE mark ----- Ex-works price upon request! Plus freight and commissioning NEW FEATURE: Fentech Standard optionally upgradeable to orbital sanding: The orbital sanders are installed in an extended housing section positioned ahead of the standard machine configuration. This allows us to combine the effective, scratch-free sanding action of the orbital sanders with the finish provided by the brushes. This ensures that the visible surfaces of the window profiles have a perfectly flat finish, completely free of raised wood fibers thanks to the subsequent brush sanding process. (Technical specifications provided by the manufacturer – subject to change!)

Condition: new, Number of sanding units 2 St. sanding width 100,150 mm Sanding height max. , B Roba Twin Flat ----- Bench-mounted brush belt sanding unit for fine wood sanding and intermediate lacquer sanding. The machine utilizes two brush belt sanding units, with the sanding mechanism of the right and left units each facing outwards. This prevents—particularly during intermediate lacquer sanding— the risk of sanding through the edges. Two support rollers are located between the two units, facilitating the handling of long workpieces. Machine configuration: 1 Welded steel base frame 1 Work table – dimensions: 3100 mm x 600 mm x 850 mm 2 Brush belt sanding units Two sanding zones, each featuring 122 sanding segments that are easily replaceable via a plug-in system. Available abrasive trim heights: 30 / 45 / 60 / 75 mm (Machine supplied with initial abrasive setup according to customer specifications) Drive via geared motor: 2 x 1.1 kW Working width of sanding zone 1: 100 mm Working width of sanding zone 2: 150 mm Working length of sanding belt: approx. 2 x 1150 mm Sanding zone integrated into the table. Sanding belt speed: 60 m/min – 230 m/min, electronically continuously variable. Extraction ports: 3 x 100 mm Equipment features: Central control and switch cabinet IP 54 rated. Electrical components: Klöckner Möller Geared motors: Getriebebau Nord Frequency converters: Schneider Electric Connected load: 3.0 kW Operating voltage: 230/400 V, 50 Hz, 3-phase/N Machine finish: RAL 7035 / RAL 5018 Standards: CE mark Working range: max. 100 mm / 150 mm Working height: 850 mm +/- 50 mm Machine length: approx. 3100 mm Machine width: approx. 600 mm Machine weight: approx. 400 kg Bwodezqvnvepfx Albet Plus pallet for truck transport (Twin Flat): 175.00 EUR plus VAT OPTION Roba Twin Flat FR (for sashes that are already pressed): ----- See the last 3 images; price on request! (Technical data per manufacturer – subject to change/no liability assumed)

Condition: new, Number of sanding units 10 St. sanding width 25-240 mm Sanding height max. 15-140 mm MB ROBA Fentech ORBITAL, fully automatic sanding machine Bwjdszqvnpepfx Albjt Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine wood sanding - Impregnation sanding - Intermediate lacquer sanding Advantages of the ROBA Fentech principle: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm sanding tool diameter optimizes sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a through-feed machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design - Freely selectable abrasive configuration from the MB Flex System. Brief overview of technical details (detailed description available upon request!): Workpiece length: max. unlimited, min. approx. 250 mm Workpiece width: 25–240 mm Workpiece height: 15–140 mm - Automatic, scanner-based workpiece detection at machine infeed - 2.0 m infeed table - Driven vacuum transport system - 1x Twin orbital sanding unit for right-side processing - 1x Twin orbital sanding unit for left-side processing - 1x Twin-spindle unit for right-side processing - 1x Twin-spindle unit for left-side processing - 1x Twin-spindle unit for processing from below - 1x Twin-spindle tilting unit for processing from above - 2.0 m outfeed table - Initial set of abrasives - Roba Fentech HMI (9" display, 400x400 housing, Siemens HMI) - Siemens control system - Electrical components: Klöckner Möller - Geared motor: Getriebebau Nord - Frequency converter: Schneider Electric - CE mark ----- Ex-works price upon request! Plus freight and commissioning (Technical specifications provided by the manufacturer – subject to change/without guarantee!)

Condition: ready for operation (used), Wingspan: 3950 mm Bwodjzp Iqgopfx Albet Overall height: 3650 mm Load capacity: 4000 kg without lifting device