Used Lorenz Ls 630 for sale (4,549)

Condition: good (used), max. ram stroke 230 mm throat 230 mm table diameter 0 mm Fjdpfxew Ny S Re Akyjpn are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown

Condition: used, Year of construction: 1988, machine/vehicle number: 14411, stroke length: 220 mm, table diameter: 730 mm, For sale is a Lorenz LS 630. A robust and precise machine, renowned for its high build quality. The machine requires technical refurbishment due to the control system, but is in very good mechanical condition. It can process components up to module 12. A stable and high-quality Lorenz LS 630 that can be made fully operational again with some effort. Fjdpfx Akexrcmboyspn

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, wheel width: 200 mm, stroke length: 230 mm, feed length X-axis: 500 mm, type of input current: three-phase, total height: 2,900 mm, table load: 2,750 kg, table diameter: 1,005 mm, overall weight: 12,000 kg, input frequency: 50 Hz, total width: 3,300 mm, total length: 3,800 mm, distance table to spindle center: 640 mm, gear diameter: 1,000 mm, distance table center to spindle nose: 640 mm, workpiece diameter (max.): 1,000 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Siemens Sinamics S120, control type: CNC control, stroke rate (min.): 15 1/min, stroke rate (max.): 510 1/min, The universal machine for gearings that cannot be milled: The Lorenz LS 1000 CNC machines internal and external toothed spur gears up to 1000 mm in diameter – hollow gears for planetary gearboxes, gear rings, couplings, gears with a flange or chamfer. Completely modernized with Siemens Sinumerik ONE, new electrical system, hydraulics and lubrication, designed for maximum performance and accuracy in flexible manufacturing. Acceptance according to DIN and manufacturer's standards with a protocol. Offered by Serwema Retrofit Solutions, Chemnitz. Fjdpfx Aoz E H Rnskyepn The LS 1000 was developed as a universal machine for construction machinery, wind turbine and machine tool gearboxes, mining technology, aerospace and textile machines, and is suitable for both single parts, small series and large series. The main application is the hobbing of straight-toothed and – with a helical guide and matching cutting wheel – helical-toothed spur gears with internal or external teeth. With software options, the machine can also process non-circular gears, grooves and cams; with special cutters, couplings as well as involute and spur gears are produced. The Sinumerik ONE with electronic gear unit guides the user through workpiece and tool data using masks, without the need for programming.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² Fpsdpfxoxwl N As Akyjn - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm Fpodpfxezv Ulqs Akyen gear width 120 mm max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm table diameter 400 mm boring diameter 125 mm spindle stroke 120 mm stroke position adjustment 230 mm strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² Fsdpexwlmuefx Akyspn - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: ready for operation (used), Year of construction: 1990, total width: 3,900 mm, total height: 3,400 mm, travel distance X-axis: 360 mm, travel distance Z-axis: 154 mm, overall weight: 9,000 kg, product length (max.): 5,300 mm, table load: 1,000 kg, number of axes: 3, This 3-axis LORENZ LS 424 shaping machine was manufactured in 1990. It features a maximum wheel diameter of 420 mm and a stroke rate of 32 - 800 strokes/min. The machine has an impressive X-travel of 360 mm and a Z-travel of 154 mm, with a maximum table load of 1000 kg. If you are looking to get high-quality shaping capabilities, consider the LORENZ LS 424 machine we have for sale. Contact us for further details. Fpsdoz Hk Iyjpfx Akysn - Control Defect: Control unit reported as defective - Wheel Diameter Max.: 420 mm- Wheel Width: 120 mm- Module Max.: 8- Module Min.: 0.5- Control Unit: BWO CNC- Stroke Rate: 32 - 800 strokes/min (infinitely variable 25 - 800 strokes/min)- Total Power Requirement: 50 kW- Machine Elevation: 200 mm- X-Travel: 360 mm- Z-Travel: 154 mm- L-Travel: 137 mm- External Gear Cutting Max. Outer Diameter: 420 mm- Internal Gear Cutting Max. Inner Diameter: 370 mm- Workpiece Outer Diameter: 420 mm- Max. Stroke Length: 130 mm- Wiring Diagram: E8 Additional Equipment: Straight Guide, Leveling Feet

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97 09 05 010 1/2, filter pressure: 15 bar, pressure: 15 bar, cake thickness: 25 mm, warranty duration: 12 months, year of last overhaul: 2026, operating pressure: 380 bar, number of chambers: 25, control voltage: 24 V, Equipment: documentation/manual, safety light barrier, Good day, We have two identical chamber filter presses in stock, which have been completely overhauled and are therefore in new condition. They are immediately available! Please see the attached photos: Chamber filter press – manufactured by MSE with plate thickness: 50mm each with an additional set of plates cake thickness: 25mm volume: approx. 210 l useful length approx. 1800mm (34 plates) format: 630x630 mm dimensions: 3700x1100x1800 mm (l x w x h) Fpodpfxozt Nc Eo Akyjn empty weight: 2700kg open filtrate discharge plate transport manual hydraulics electric Please let us know if you are interested in this press. We would be happy to send you a customized offer. Price on request.

Condition: ready for operation (used), Year of construction: 2015, controller manufacturer: SIEMENS, controller model: n/a, overall weight: 7,000 kg, This 3-axis LORENZ LS 150 was manufactured in 2015. It features a connected load of 60KVA, a rated current of 50A, and operates on a 400V system. Weighing 7000kg, this machine has been modernized to enhance performance. If you are looking to get high-quality milling capabilities, consider the LORENZ LS 150 machine we have for sale. Contact us for more information. Fpsdex D Iyqspfx Akysn Additional equipment • Rolling, single tooth parts, spiral feed Machine Benefits Technical Machine Benefits • Operating voltage: 400v • Connected load: 60kva • Rated current: 50a • Frequency: 50hz • Main fuse: 63a • Retrofit: a cnc retrofitting was carried out in 2015, sinumerik 840d control system. • All mechanical components checked, all hydraulic components checked and hoses replaced. • All necessary components were installed to guarantee problem-free production. Extra Information Machine still under power // All necessary components were installed to guarantee problem-free production.

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Fpedpfeyw Hxnsx Akysn Technical Data Diameter: 1250 mm Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 20-14446, wheel width: 1,000 mm, stroke length: 200 mm, Gear shaper with cutter – module 10 – max. diameter 1000 mm – vertical rise 250 mm – stroke 200 mm – equipped with two additional tables of 850 mm and 1500 mm diameter – many accessories and programs for 1-2-3-4 cycles and for spiral cutting. Fodpfx Akoybaz Njyepn

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need. Fodpfst Hww Dsx Akyjpn

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Fpjdpfx Aksxwl Tzeysn Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Fpodpfx Akoxyadteyon Center distance workpiece/jigging spindle: –80 mm to +320 mm Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Fpsdpfswvbqiox Akyjn Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm Fpsdsyb Sx Tepfx Akyon gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 Fpodpjzq Hmcjfx Akyon taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: like new (used), max. wheel diameter 420 mm gear width 120 mm max. module 8 min. module 0,5 control BWO CNC no. of strokes 32-800 Hub/min total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5,3 x 3,9 x 3,4 m Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC Fedpfx Akjtycgfsyopn x-travel 360 mm z-travel 154 mm L-travel 137 mm max. table load 1000 kg Control system Total power requirement 50 kW Machine weight approx. 8400 tonnes Space requirement approx. 5.3 x 3.9 x 3.5 m o Straight guide o Machine elevation 200 mm o With automatic workpiece clamping device o Counter holder Year of construction: approx. 1989

Condition: reconditioned (used), functionality: fully functional, conveyor belt width: 615 mm, total width: 2,800 mm, total length: 1,230 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, year of last overhaul: 2026, opening width: 30 mm, working width: 615 mm, space requirement length: 1,230 mm, space requirement width: 2,800 mm, type of input current: three-phase, Fritsch Rollfix 3W 630 Dough Sheeting Machine for all types of dough, for sheeting and shaping Stainless steel construction Manual control & 3-stage automatic operation Mobile dough sheeting machine with hand and foot controls Pressure plate with adjustment for long rollers/long dough shapers DGUV V3 certified – available only from us Connection: 400V, 16A-CEE plug Dimensions: 2800 x 1230 mm (W x D) Used machine & SAB inspected Fsdpfx Aozbz Hgekyepn with warranty

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 230 V, total width: 830 mm, total length: 870 mm, total height: 1,710 mm, overall weight: 150 kg, operating temperature: 60 °C, compressed air connection: 6 bar, Lorenz FMP04 Filter Test System, 2021 – EN 143/149, ISO 16900-3 – €47,900 net, negotiable Fpjdpfsz Inf Sox Akyjn Test respirator filters and masks (FFP and medical face masks) in-house instead of paying for lab time: the Lorenz FMP04 automatic filter test system measures filter penetration and breathing resistance in a single run, with results available within seconds. New price currently: approx. €95,000 net. Your price: €47,900 net (negotiable), ex works (EXW) Hamburg. One unit only, lightly used. What you get: • Standards-compliant testing according to EN 143, EN 149, ISO 16900-3, ISO 17420-2, and NIOSH 42 CFR Part 84; all parameters adjustable for customer-specific tests. • Two laser aerosol photometers (upstream and downstream) with automatic reference calibration and auto-ranging across six orders of magnitude. • Aerosol generator using paraffin oil heated to 60 °C, automatic oil supply from external reservoirs, software-based switching between standards. • Quick-change filter holder, Ø 112.8 mm (100 cm²), face velocity 5–40 cm/s, automatic flow reversal; canister filter adapter plate. • Extension for differential pressure testing per EN 14683 Annex C.4 (surgical masks) with adapter plates (2.5 cm bore); a €1,836 option in 2021. • 15" full-HD touchscreen, integrated PC, filter database, test history, CSV export, test reports with your logo, graphs for loading tests; USB and network. • Flow 8–300 l/min, efficiency 0.0001–100 %, breathing resistance 5–1,000 Pa (manufacturer data for the FMP04 series). • Scope: all adapter plates and accessories are included. Specifications: built 2021, approx. 150 kg, 870 × 830 × 1710 mm, 115/230 V. Requires compressed air ≥ 6 bar, ≥ 50 l/min (oil-, water- and particle-free). Please note: service is due. The unit has seen little use. Service and recalibration are due and are already reflected in the price. Why act now? Inspection and a test run in Hamburg can be arranged. Sold ex works (EXW) Hamburg. Inquire today: response within one business day. Price negotiable. Location: Hamburg, Germany.

Condition: as good as new (ex-display), functionality: fully functional, 1. Machine Specifications * 2 work tables with pallet changing system - Clamping area: 630 x 630 mm - Threaded holes: 23 x M16x30 - Max. clamping weight: 1000 kg * Travel ranges - Table longitudinal adjustment (x): 850 mm - Support vertical adjustment (y): 710 mm - Column transverse adjustment (z): 710 mm * Max. feed rate: 10 m/min * Rapid traverse: 15 m/min * Working spindle - Tool interface: SK 50 DIN - Drive power: 22 kW AC - Torque: 660 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine: 60 positions * Control system: Sinumerik 850M, software version 4.5 * Feed and main drive: AC Indramat * Footprint (L x W x H): 4100 x 6000 x 3500 mm * Work area protection 2. Technical Condition The machine has never been used in production!!! It is an unused machine – no production hours. Therefore, the machine meets all technical parameters within the acceptance conditions for new machines. 3. Warranty: Last inspection 04/2026, 6 months 4. Prices: * Machine: €120,000.00 * Spare parts package: included * Assembly/Commissioning: €7,500.00 (for assembly/commissioning abroad, travel expenses will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding VAT. We reserve the right to sell the machine in the meantime. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order 60% upon delivery 10% upon handover * Delivery time: 4 weeks Manfred Friedrich Export / Import Clemens-Winkler-Str. 6, 09116 Chemnitz The following spare parts can be supplied: Indramat motor - 2 AD 132D-BO50 R2-AS 03 - MAC 093 A-0-LS-2-C/130-A1 Fpjdoz H Tqwspfx Akyen - MAC 112D-0-HD-4-C/180-BO - MAC 112C-0-KD-2-C/180-A-2 Indramat controller - TBM 1.2-40-W 1/220 V - TDM 1.2-100-300-W1 - TVM 2.2-050-220/300-W1 Heidenheim length measuring system LS403-820 2x - LS403-1020 Tool holders DIN SK 50 - 60 pieces Roller guide element 26 110 - 25 pieces

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C11008, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,500 kg, No minimum price – guaranteed sale to the highest bidder! Fsdpfx Asz Ebbuekyopn TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 3,000 mm Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS Drive type: Hydraulic Control: Conventional Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,000 x 1,950 mm Shipping weight: 7,500 kg Shipping packages: 1 unit EQUIPMENT Documentation Angle adjustment: Manual Shear gap adjustment: Manual Finger guard: Fixed

Condition: used, functionality: fully functional, total height: 1,100 mm, table diameter: 310 mm, overall weight: 5,000 kg, total width: 2,300 mm, total length: 1,800 mm, For sale is a gear hobbing machine as shown in the attached pictures. Fjdpfxozz Ilns Akyopn Manufacturer: LORENZ Max. wheel diameter: 500 mm Max. module: 5 Max. gear width: 100 mm Max. gear shaping length: 75 mm Number of strokes/min of the cutter: 45 / 424 Cutting speed: 18 Screw diameter: 78 mm Max. gear shaping diameter: 500 mm Max. external shaping diameter: 500 mm Max. internal shaping diameter: 450 mm Hole diameter of the table: 125 mm Diameter of table: 310 mm Total power: 3.0 kW Voltage: 220 / 380 V

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine -Well-maintained machine with extensive accessories Fsdpfjzv Ed Dsx Akyepn -1 pallet / Change gears -1 pallet / Hobbing cutters -1 pallet / Clamping arbors DOCUMENTATION -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Errors and omissions excepted.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84kW Multi-blade saw Dimensions Length 3440 mm Width 1900 mm Height 1700 mm Fpedpfx Aez H T Ayokyen Cutting parameters Maximum diameter of the log to be sawn 450 mm Diameter of the circular saw 630 mm Minimum width of the center stack 60 mm Maximum number of saws per spindle 4 pieces 2 spindles, one on top and one on the bottom Motors Power of the motor for the lower drive 52 kW Power of the motor for the upper drive 41 kW Spindle speed 1480 rpm Infinitely variable feed rate 0–15 m/min (0–25*) Power of the motor for the feed drive 4 kW Additional equipment Log turner for rotating and positioning logs up to 6 m in length Side product separator for material up to 6 m in length