Used Lorenz Decoiler for sale (312)

Condition: used, max. wheel diameter 500 mm gear width 75 mm max. module 5 min. module 0,5 no. of strokes 45 - 424 Hub/min Nedpfx Agezw N E Uj Newk total power requirement 6 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 2,0 x 1,4 x 2,3 m Rapid traverse in the table. Change gears, toolholders, manuals.

Condition: used, Year of construction: 1998, machine/vehicle number: 000373, Comm. no.: Lg 34723 Double decoiler LORENZ HH 2000.2 Used, in good condition year of construction 1998 - machine no. 000373 with - hydraulic spreading and automatic retensioning - belt center adjustment manually via spindle - counterholder with quick clamping - circular protection ring - easily exchangeable clamping cylinder (service-friendly) - manual swiveling - direction of rotation changeover (top-bottom unwinding) load capacity max. 2.000 kg/side strip width max. 300 mm Coil inner diameter approx. 360 to 420 Coil inner diameter approx. 460 to 520 mm Coil outer diameter max. 1,800 mm Nwedonbdyaopfx Ag Njk with drive via three-phase geared motor and pneu. brake. drive power approx. 2.2 KW/side Unwinding speed approx. max. 40 m/min. Coil limitation via fixed limiting ring at the rear and adjustable counterholder (with quick clamping) at the front. Coiler stand with base frame with lateral shifting for coil center positioning. Currently without electric control. Can be re-engineered and offered on request.

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine -Well-maintained machine with extensive accessories -1 pallet / Change gears -1 pallet / Hobbing cutters -1 pallet / Clamping arbors DOCUMENTATION -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal Nwodpfx Agezv Ed Do Nek -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable Nwsdpjpvlf Sofx Ag Nek - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm gear width 120 mm max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm table diameter 400 mm boring diameter 125 mm spindle stroke 120 mm stroke position adjustment 230 mm Njdpezv Ulqjfx Ag Nowk strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation

Condition: used, Year of construction: 1988, machine/vehicle number: 14411, stroke length: 220 mm, table diameter: 730 mm, For sale is a Lorenz LS 630. A robust and precise machine, renowned for its high build quality. The machine requires technical refurbishment due to the control system, but is in very good mechanical condition. It can process components up to module 12. A stable and high-quality Lorenz LS 630 that can be made fully operational again with some effort. Nsdpfoxrcmbsx Ag Nswk

Condition: like new (used), number 1 Stück LORENZ disc cutting wheel HM: HB10 - F Z2/Z0= 15/60 14 - 44C 46 711/1 Njdpfszupl Aex Ag Newk mn3.08 an21° z60

Condition: like new (used), number 1 Stück Nwedpfxjzupmas Ag Njk LIEBHERR/LORENZ disc cutting wheel Modul 4 - EW 30° - Zähne 12 - DIN 5480 - new

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm number of rolls 21 straightening feed 0- 60 m/min straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Nwedezafi Nspfx Ag Njk Main Gearbox was renewed in 2021.

Condition: used, Year of construction: 1997, material width 820 mm coil weight 7,5 t material thickness 0,8 - 5,0 mm coil internal diameter 470 - 520 mm coil external diameter 1600 mm material cross-cut 1600 mm² Nodozrpp Aspfx Ag Njwk no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min Decoiler HH 7500.1 with: - hydraulic expansion and automatic re-tensioning - material centre adjustment - adjustable pneumatic disc brake - counter-holder with quick clamping - circular guard ring - fixed coil loading chair Insertion aid consisting of: - snubber roll (driven) - infeed wedge - hold-down roll Straightening machine BRM 50/820.7 with: - automatic circular oil lubrication of the cardan shafts - torque-dependent overload protection - motoric roller cassette adjustment with digital display - quick-change device of the cardan shafts - quick-change device of the straightening rolls Transfer table + ultrasonic control BÜU-5 with: - loop control via ultrasonic sensor (analogue) - strip sag monitoring (min/max) - strip end monitoring

Year of construction: 2021, condition: ready for operation (used), An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example. Nwsdpfxsy Tx Slj Ag Nok

Condition: used, Technical data: - Manufacturer Leif & Lorenz - Working width max. 1,200 mm - Brush diameter *160 mm - Suction connection D100 mm - Year of manufacture 2005 - Motor power 0.37 kW Nsdpfjzf N Ekox Ag Nowk - Location, in stock in Blomberg - Also available for assembly with roller or belt conveyor

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Technical Data Diameter: 1250 mm Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Nwsdjyw Hxnspfx Ag Njk Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts.

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Nwodsytqxpjpfx Ag Nsk

Condition: good (used), functionality: fully functional, Decoiler for up to 150 kg coil weight, stepless speed adjustable from 5 to 25 m/min. Rjbmnaoyyvzkj Sh Uer Nwsdpfxezwt Nqe Ag Nek

Condition: used, Unwinding reel, reversing reel, LIV type O 2X20/360 H - DZ - AP Double unwinding reel Manufacturer's No. 11154298, Year of manufacture 1998 Coil weight max. 2000 kg per side Coil width max. 360 mm Coil outer diameter max. 1200 mm Coil inner diameter approx. 350 - 450 mm Nsdpjzwz Syefx Ag Newk Distance from center of reel shaft to floor 1200 mm Distance from center of reel shaft to reel base 1030 mm Hydraulic motor power 0.75 kW Mains connection 400 volts, 50 Hz - pneumatic disc brake for each side, separate - without drive for the reel core - hydraulic spreading of the reel core - pneumatic pressure arm with roller - reel structure can be manually rotated by 180° with locking positions - coil guide ring Ø 1240 mm, for lateral coil guidance - pivoting arm for mounting and dismounting the coil guide ring - electrical control for each coil side, separate Space requirement L x W x H 2050 x 1700 x 2350 mm Weight 1950 kg in good condition

Year of construction: 2021, condition: used, DECOILER MAX COIL WEIGHT 1000kgr MAX COIL WIDTH 400mm MIN INNER COIL DIAMETER 370mm MAX OUTER COIL DIAMETER 550mm POWER 1,1kw Nwsdpfx Agogf Aaqo Njk LIKE NEW UNUSED 4 PIECES IN STOCK

Condition: ready for operation (used), Year of construction: 2008, number of axes: 4, This 4-axis Lorenz LS 420 was manufactured in 2008. It features a NUM control system, capable of handling external and internal splines, single points, and segment splines. It can manage spline jointing up to B = 25 mm and spline hub profiles. The stroke length is 140 mm. Consider the opportunity to buy this Lorenz LS 420. Contact us for more information. Additional equipment • rolling, single tooth, spiral feed Machine Benefits Qualitative Machine Benefits • Modernized and converted to cnc 2008 with all mentioned processes. Technical Machine Benefits • Stroke length: 140 mm • External splines • Internal splines • Single points • Segment splines • Spline jointing up to 25 mm • Spline hub profiles internal / external Nedpfx Ajx D Iyksg Nswk • Splines up to quality 6 / 7 Extra Information Machine still under power

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single-sided unwinding reel ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Spreader: hydraulically operated Presser arm: hydraulically operated Take-up reel with auxiliary drive and brake Nedpfxshigmbo Ag Newk Coil loading table, fixed + reel traversing device including: Lg 33221 High-performance strip straightening machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no. 001669 Maximum pass width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multiply supported to prevent deflection. Drive for all rollers via a distributor gearbox and universal joints. Used, as is, ex warehouse, immediately available. Overhaul possible upon request. Delivery time upon agreement. Further data will be available shortly or upon request.

Condition: good (used), Year of construction: 1965, max. wheel diameter 900 mm max. module 6,5 stroke up to 150 mm table diameter 900 mm table hole 360 mm weight 3,7 t External: max. diameter 900 mm Max. gear width 150 mm Internal: Max. diameter 630 mm Max. gear width 150 mm Spindle bore table 360 mm Table diameter Ø 900 mm Module 6.5 mm Nwjdpeywnt Tjfx Ag Nsk Length 2500 mm Width 2300 mm Height 2600 mm Weight 4100 kg

Condition: used, Year of construction: 2015, functionality: fully functional, Heavy-duty pallet decoiler with integrated precision straightening head, designed to feed coiled strip material into stamping lines and other downstream processing. The large 1500 mm rotating table handles full pallet-mounted coils up to 3000 kg, while the 9-roll straightener (5 lower driven + 4 upper) ensures a flat, stress-relieved strip ready for production. Both turntable and straightener are independently driven via frequency inverters, allowing precise speed and tension control. Ideal for stamping operations where coil material is delivered on pallets rather than mandrels — eliminating the need for separate coil cars and reducing changeover time. Technical Specifications Table diameter 1500 mm Table load capacity 3000 kg Max. table rotation speed 10 rpm Strip speed 10 m/min (at core Ø 300 mm) Stamping direction Left to right Winding direction CW or CCW (selectable) Max. strip thickness 1.5 mm Max. strip width 220 mm Nedpjzav Ngefx Ag Nowk Turntable drive motor 2.2 kW, inverter-controlled Turntable bearing Four-point bearing Straightener head 9 rolls (5 lower + 4 upper) Roll diameter 40 mm Lower rolls All driven Straightener drive motor 0.75 kW, inverter-controlled Electrical connection 3×400V + N + PE, 50 Hz, 16 A Dimensions (L × W × H) 2250 × 1500 × 1700 mm Weight ~750 kg Paint finish RAL 7035 light grey, structured

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm Nsdpfxozq Hmco Ag Njwk total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 20-14446, wheel width: 1,000 mm, stroke length: 200 mm, Gear shaper with cutter – module 10 – max. diameter 1000 mm – vertical rise 250 mm – stroke 200 mm – equipped with two additional tables of 850 mm and 1500 mm diameter – many accessories and programs for 1-2-3-4 cycles and for spiral cutting. Nwedpfoybaz Nox Ag Nsk

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm Njdpsyb Sx Tjfx Ag Newk taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: ready for operation (used), Year of construction: 2015, controller manufacturer: SIEMENS, controller model: n/a, overall weight: 7,000 kg, This 3-axis LORENZ LS 150 was manufactured in 2015. It features a connected load of 60KVA, a rated current of 50A, and operates on a 400V system. Weighing 7000kg, this machine has been modernized to enhance performance. If you are looking to get high-quality milling capabilities, consider the LORENZ LS 150 machine we have for sale. Contact us for more information. Additional equipment • Rolling, single tooth parts, spiral feed Machine Benefits Technical Machine Benefits Nsdpfxjx D Iyqe Ag Njwk • Operating voltage: 400v • Connected load: 60kva • Rated current: 50a • Frequency: 50hz • Main fuse: 63a • Retrofit: a cnc retrofitting was carried out in 2015, sinumerik 840d control system. • All mechanical components checked, all hydraulic components checked and hoses replaced. • All necessary components were installed to guarantee problem-free production. Extra Information Machine still under power // All necessary components were installed to guarantee problem-free production.